Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Technology data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Cost and Performance Baseline for Fossil Energy Plants - Volume 4: Coal-to-Liquids via Fischer-Tropsch Synthesis

This report establishes performance and cost data for coal-to-liquids systems, specifically by means of gasification and Fischer-Tropsch reaction. The analyses were performed on a consistent technical and economic basis to assess the design and financial performance of a commercial-scale coal-to-Fischer-Tropsch liquids facility. The cost and performance data were compiled from published reports, information obtained from vendor quotes and users of the technology, and data from designing and building utility and refining projects.

01 COAL, LIGNITE, AND PEAT↗

Cost and Performance Baseline for Fossil Energy Plants - Volume 2: Coal to Synthetic Natural Gas and Ammonia

This report establishes performance and cost data for coal fueled plants producing synthetic natural gas and ammonia. The plants are based on a dry-feed entrained-flow gasifier and include cases using bituminous, sub-bituminous, and lignite coals. All configurations were studied with and without carbon sequestration. The analyses were performed on a consistent technical and economic basis that accurately reflects current market conditions for plants starting operation in 2012. This is believed to provide the most comprehensive set of cost and performance data available in the public literature to date. The cost and performance data were compiled from published reports, information obtained from vendor quotes and users of the technology, and data from designing and building projects.

01 COAL, LIGNITE, AND PEAT↗

Cost and Performance Baseline for Fossil Energy Plants - Volume 2: Coal to Synthetic Natural Gas and Ammonia [Slides]

Presentation of Volume 2: This report establishes performance and cost data for coal fueled plants producing synthetic natural gas and ammonia. The plants are based on a dry-feed entrained-flow gasifier and include cases using bituminous, sub-bituminous, and lignite coals. All configurations were studied with and without carbon sequestration. The analyses were performed on a consistent technical and economic basis that accurately reflects current market conditions for plants starting operation in 2012. This is believed to provide the most comprehensive set of cost and performance data available in the public literature to date. The cost and performance data were compiled from published reports, information obtained from vendor quotes and users of the technology, and data from designing and building projects.

01 COAL, LIGNITE, AND PEAT↗

Piezo-Antenna: An Electromagnetic-Ultrasonic Data Transfer System

Electronic systems contained within sealed metallic enclosures, such as nuclear waste containers where wire penetration is not an option, require a through-wall data transfer technology to communicate. One such technology utilizes piezoelectric ultrasonic transducers to communicate through the barrier using elastic waves. Currently demonstrated ultrasonic through-wall data communication techniques have relied on having a direct interface with the ultrasonic transducers on either side. Here, this work studies the coupling of an antenna to such an ultrasonic communication system. A computationally efficient model of a piezobarrier ultrasonic communication system and antenna using a simplified antenna model and a transfer matrix piezobarrier model is utilized to perform a representative parameter space search. The system efficiency and bandwidth trends are shown for the system parameters as well as operating frequency. The tradeoff between efficiency and bandwidth is also presented. A system configuration within the parameter space is fabricated and demonstrated to achieve a data rate of up to 100 kb/s.

Antenna↗

Survey of emerging nuclear data needs for nonproliferation applications with advanced reactors

Nuclear science plays a key role in non-proliferation activities supporting advanced reactor technologies. Nuclear data underpin predictions and interpretations of nuclear material behavior and signatures in reactor fuel production, use, transport, and storage. Advanced reactors provide new challenges compared to the current fleet of thermal fission reactors. This report consolidates reported nuclear data needs from representative workshops, conferences, and publications, identifying six themes for recommended future investments supporting non-proliferation and safeguards applications. While also identified as data needs, major fission product evaluations and (α,n) reactions were omitted as there are ongoing activities producing new data under NA22/Objective O. Each theme is summarized below with example data and association with the nonproliferation mission for advanced fuels and reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Technological advances for studying human behavior

Technological advances for studying human behavior are noted in viewgraph form. It is asserted that performance-aiding systems are proliferating without a fundamental understanding of how they would interact with the humans who must control them. Two views of automation research, the hardware view and the human-centered view, are listed. Other viewgraphs give information on vital elements for human-centered research, a continuum of the research process, available technologies, new technologies for persistent problems, a sample research infrastructure, the need for metrics, and examples of data-link technology.

Roske-Hofstrand, Renate J.↗

Data-Base Software For Tracking Technological Developments

Technology Tracking System (TechTracS) computer program developed for use in storing and retrieving information on technology and related patent information developed under auspices of NASA Headquarters and NASA's field centers. Contents of data base include multiple scanned still images and quick-time movies as well as text. TechTracS includes word-processing, report-editing, chart-and-graph-editing, and search-editing subprograms. Extensive keyword searching capabilities enable rapid location of technologies, innovators, and companies. System performs routine functions automatically and serves multiple users.

Aliberti, James A.↗

Multi-static Serial LiDAR for Surveillance and Identification of Marine Life at MHK Installations

Final Report for project DE-EE0006787: Multi-static Serial LiDAR for Surveillance and Identification of Marine Life at MHK Installations. This project developed and tested an optical monitoring system prototype that will be suitable for marine and hydrokinetic (MHK) full project lifecycle observation (baseline, commissioning, and decommissioning), with automated real-time classification of marine animals. This system can be deployed to collect pre-installation baseline species observations at a proposed deployment site with minimal post-processing overhead. To satisfy deployed MHK project species of concern (e.g. Endangered Species Act-listed) monitoring requirements, the system provides automated tracking and notification of the presence of managed animals within established perimeters of MHK equipment and provides high resolution imagery of their behavior through a wide range of conditions. During a project’s decommissioning stage, the system can remain installed to provide resource managers with post-installation data. Our technology, known as an Unobtrusive Multi-static Serial LiDAR Imager (UMSLI), is a technology transfer of underwater distributed LiDAR imaging technology that preserves the advantages of traditional optical and acoustic solutions while overcoming associated disadvantages for MHK environmental monitoring applications. This new approach is a purposefully-designed, reconfigurable adaptation of an existing technology that can be easily mounted on or around different classes of MHK equipment. The system uses low average power red (638nm) laser illumination to be invisible and eye-safe to marine animals and is compact and cost effective. The equipment is designed for long term, maintenance-free operations, to inherently generate a sparse primary dataset that only includes detected anomalies (animal presence information), and to allow robust real-time automated animal classification/identification with a low data bandwidth requirement. Advantages of the technology over others currently being used or being considered for MHK monitoring include: Unlike a conventional camera, the depth of field is near-infinite and limited by attenuation (approximately 5-8 m) rather than focal properties of a lens; Operation in an adaptive mode which can project a sparse grid of pulses with higher peak power for longer range detection (>10 meters) and track animals within a zone of interest with high resolution imagery for identification of marine life at closer range (<5m); System detection limit and Signal-to-Noise-Ratio is superior to a camera, due to rejection of both backscattering component and ambient solar background; Multiple wide-angle pulsed laser illuminators and bucket detectors can be flexibly configured to cover a 4pi steradian (i.e. omnidirectional) scene volume, while also retrieving 3D features of animal targets from timing information; Process and classification framework centered around a novel active learning and incremental classification classifier that enables accurate identification of a variety of marine animals automatically; A two-tiered monitoring architecture and invisible watermarking-based data archiving and retrieving approach ensures significant data reduction while preserving high fidelity monitoring. A methodology to train and optimize the classifier for target species of concern to optimize site monitoring effectiveness. This technological innovation addresses a high priority regulatory requirement to observe marine life interaction near MHK projects. Our solution improves resource manager confidence that any interactions between marine animals and equipment are observed in a cost-effective and automated manner. Without EERE funding, this novel application of multi-static LiDAR would not have been available to the MHK community for environmental monitoring.

16 TIDAL AND WAVE POWER↗

Seismic Technology Adapted to Analyzing and Developing Geothermal Systems Below Surface-Exposed High-Velocity Rocks Final Report

The objective of our research was to develop and demonstrate seismic data-acquisition and data-processing technologies that allow geothermal prospects below high-velocity rock outcrops to be evaluated. To do this, we acquired a 3-component seismic test line across an area of exposed high-velocity rocks in Brewster County, Texas, where there is high heat flow and surface conditions mimic those found at numerous geothermal prospects. Seismic contractors have not succeeded in creating good-quality seismic data in this area for companies who have acquired data for oil and gas exploitation purposes. Our test profile traversed an area where high-velocity rocks and low-velocity sediment were exposed on the surface in alternating patterns that repeated along the test line. We verified that these surface conditions cause non-ending reverberations of Love waves, Rayleigh waves, and shallow critical refractions to travel across the earth surface between the boundaries of the fast-velocity and slow-velocity material exposed on the surface. These reverberating surface waves form the high level of noise in this area that does not allow reflections from deep interfaces to be seen and utilized. Our data-acquisition method of deploying a box array of closely spaced geophones allowed us to recognize and evaluate these surface-wave noise modes regardless of the azimuth direction to the surface anomaly that backscattered the waves and caused them to return to the test-line profile. With this knowledge of the surface-wave noise, we were able to process these test-line data to create P-P and SH-SH images that were superior to those produced by a skilled seismic data-processing contractor. Compared to the P-P data acquired along the test line, the SH-SH data provided a better detection of faults and could be used to trace these faults upward to the boundaries of exposed surface rocks. We expanded our comparison of the relative value of S-wave and P-wave seismic data for geothermal applications by inserting into this report a small part of the interpretation we have done with 3C3D data across Wister geothermal field in the Imperial Valley of California. This interpretation shows that P-SV data reveal faults (and by inference, also fractures) that cannot be easily, or confidently, seen with P-P data, and that the combination of P-P and P-SV data allows VP/VS velocity ratios to be estimated across a targeted reservoir interval to show where an interval has more sandstone (the preferred reservoir facies). The conclusion reached from this investigation is that S-wave seismic technology can be invaluable to geothermal operators. Thus we developed a strong interest in understanding the direct-S modes produced by vertical-force sources, particularly vertical vibrators, because if it can be demonstrated that direct-S modes produced by vertical-force sources can be used as effectively as the direct-S modes produced by horizontal-force sources, geothermal operators can acquire direct-S data across many more prospect areas than can be done with horizontal-force sources, which presently are limited to horizontal vibrators. We include some of our preliminary work in evaluating direct-S modes produced by vertical-force sources.

15 GEOTHERMAL ENERGY↗

Evolution of the satellite telemetry data processing facility at the Goddard Space Flight Center.

Data from scientific and application satellites managed by the NASA Goddard Space Flight Center are acquired through the world-wide Spacecraft Tracking and Data Network (STDN). These data are forwarded to a central telemetry data processing facility whose primary objective is the timely provision of the data to users in a form suitable for their analysis. In a successful evolution, a satellite data processing facility must adapt to changing support requirements while operationally supporting active spacecraft. Advances in the technology of data transmission, data storage systems, and file management make it feasible to implement a third-generation system which will be able to satisfy experimenter requirements for the next ten years.

Keipert, F. A.↗

Operational testing of a figure of merit for overall task performance

An overall indicator or figure of merit (FOM), for the quality of pilot performance is needed to define optimal workload levels, predict system failure, measure the impact of new automation in the cockpit, and define the relative contributions of subtasks to overall task performance. A normative FOM was developed based on the calculation of a standard score for each component of a complex task. It reflected some effects, detailed in an earlier study, of the introduction of new data link technology into the cockpit. Since the technique showed promise, further testing was done. A new set of data was obtained using the recently developed Multi-Attribute Task Battery. This is a complex battery consisting of four tasks which can be varied in task demand, and on which performance measures can be obtained. This battery was presented to 12 subjects in a 20 minute trial at each of three levels of workload or task demand, and performance measures collected on all four tasks. The NASA-TLX workload rating scale was presented at minutes 6, 12, and 18, of each trial. A figure of merit was then obtained for each run of the battery by calculating a mean, SD, and standard score for each task. Each task contributed its own proportion to the overall FOM, and relative contributions changed with increasing workload. Thus, the FOM shows the effect of task changes, not only on the individual task that is changed, but also on the performance of other tasks and of the whole task. The cost to other tasks of maintaining constant performance on an individual task can be quantified.

Lemay, Moira↗

NASA Earth Observations Informing Energy Management Decision Making

The Energy Sector is experiencing increasing impacts from severe weather and shifting climatic trends, as well as facing a changing political climate, adding uncertainty for stakeholders as they make short- and long-term planning investments. Climate changes such as prolonged extreme heat and drought (leading to wildfire spread, for example), sea level rise, and extreme storms are changing the ways that utilities operate. Energy infrastructure located in coastal or flood-prone areas faces inundation risks, such as damage to energy facilities. The use of renewable energy resources is increasing, requiring more information about their intermittency and spatial patterns. In light of these challenges, public and private stakeholders have collaborated to identify potential data sources, tools, and programmatic ideas. For example, utilities across the country are using cutting-edge technology and data to plan for and adapt to these changes. In the Federal Government, NASA has invested in preliminary work to identify needs and opportunities for satellite data in energy sector application, and the Department of Energy has similarly brought together stakeholders to understand the landscape of climate vulnerability and resilience for utilities and others. However, have these efforts improved community-scale resilience and adaptation efforts? Further, some communities are more vulnerable to climate change and infrastructure impacts than others. This session has two goals. First, panelists seek to share existing and ongoing efforts related to energy management. Second, the session seeks to engage with attendees via group knowledge exchange to connect national energy management efforts to local practice for increased community resilience.

Eckman, Richard↗

Recovery of Voyager Plasma Electron Observations at Jupiter

We will present our recovery of Voyager 1 and 2 plasma electron observations during their Jupiter flybys. The analysis is expected to be completed by the time of the Fall AGU 2023 Meeting and stored in Goddard’s Data Center and we will present new results never published before. The original summary data tapes and later data files at first appeared to be permanently lost but eventually located at the Massachusetts Institute of Technology, while data analysis results done at Goddard Space Flight Center, except for that published in journals, were permanently lost such as electron distribution functions, spacecraft trajectory and spacecraft attitude information. In addition to recovering the electron plasma observations (electron intensities and fluid parameters of the thermal and suprathermal electron populations, respectively), we use Spice Kernels for Voyager 1 and 2 trajectory and spacecraft attitude information, fortunately produced by NASA’s Jet Propulsion Laboratory. We will present new results of our work, originally funded under the Planetary Data Archiving, Restoration, and Tools (PDART) program but now being funded by the Internal Scientist Funding Model (ISFM) Exosphere Ionosphere Magnetospheres Modeling (EIMM) program at NASA Goddard Space Flight Center. If time permits, we will also present some of our recovery of the Voyager 2 Uranus plasma electron data and analysis similar to what was done for Jupiter.

E.C. Sittler Jr.↗

Recovery of Voyager Plasma Electron Observations at Jupiter

We will present our recovery of Voyager 1 and 2 plasma electron observations during their Jupiter flybys. The analysis is expected to be completed by the time of the Fall AGU 2023 Meeting and stored in Goddard’s Data Center and we will present new results never published before. The original summary data tapes and later data files at first appeared to be permanently lost but eventually located at the Massachusetts Institute of Technology, while data analysis results done at Goddard Space Flight Center, except for that published in journals, were permanently lost such as electron distribution functions, spacecraft trajectory and spacecraft attitude information. In addition to recovering the electron plasma observations (electron intensities and fluid parameters of the thermal and suprathermal electron populations, respectively), we use Spice Kernels for Voyager 1 and 2 trajectory and spacecraft attitude information, fortunately produced by NASA’s Jet Propulsion Laboratory. We will present new results of our work, originally funded under the Planetary Data Archiving, Restoration, and Tools (PDART) program but now being funded by the Internal Scientist Funding Model (ISFM) Exosphere Ionosphere Magnetospheres Modeling (EIMM) program at NASA Goddard Space Flight Center. If time permits, we will also present some of our recovery of the Voyager 2 Uranus plasma electron data and analysis similar to what was done for Jupiter.

E.C. Sittler Jr.↗

Accomplishments and Mid-Year Performance Report: Wind Energy Program Fiscal Year 2020

Through transformative science and innovation, the U.S. Department of Energy's (DOE's) National Wind Technology Center (NWTC) at the National Renewable Energy Laboratory's (NREL's) Flatirons Campus helps lead the way to a sustainable energy future that powers America with significant levels of reliable, low-cost, and accessible wind energy. Since 1976, NREL has provided an ideal environment for the research and development (R&D) of advanced energy technologies through: Wind energy resource assessments, World-class research facilities, High-performance computing and modeling, Data and technology analysis, Manufacturing breakthroughs, Environmental analysis and wildlife conservation efforts, Education and training programs for a future workforce. These activities enable the innovations needed to advance U.S. wind systems, address market and deployment barriers, and drive down the cost of wind energy with more efficient, more reliable, and more predictable wind energy systems. This report provides an overview of the achievements NREL delivered on behalf of DOE's Wind Energy Technologies Office (WETO) and other partners during the first and second quarters of Fiscal Year (FY) 2020.

49 EE - Wind and Water Power Program - Wind (EE-4W↗

Machine Learning Enabled Sensor Fusion for In-Situ Defect Detection in Laser Powder Bed Fusion

Laser Powder Bed Fusion (L-PBF) Additive Manufacturing (AM) is among the metal 3D printing technologies most broadly adopted by the manufacturing industry. The current industry qualification paradigm for critical-application L-PBF parts relies heavily on expensive non-destructive inspection techniques such as X-Ray Computed Tomography (XCT), which significantly limits the use-cases of L-PBF. In situ monitoring of the process promises a less expensive alternative to ex situ testing, but existing sensor technologies and data analysis techniques struggle to detect sub-surface flaws (e.g., porosity and cracking) on production-scale L-PBF printers. RTX Technologies Research Center (RTRC) has licensed ORNL’s Peregrine software package – a printer- and camera-agnostic data analytics tool designed specifically for detecting process anomalies using in situ data collected during powder bed printing. The goal of this project was to feed temporally rich, multi-modal sensor data, including visible light, integrated near infrared (NIR), and spatially mapped co-axial melt pool thermal emission data into Peregrine to enable detection of subsurface flaws. XCT data was used as ground truth training data to allow Peregrine’s deep learning algorithms to recognize anomalies in these complex data streams in both test artifacts and industrially relevant geometries. Completion of this program has seen the successful implementation of multi-modal, multi-layer sensor data footprints for training of machine learning models in Peregrine. Flaws detected in XCT data have been successfully detected directly from this in situ data footprint, and initial analyses of the in situ probability-of-detection has been conducted, showing performance levels commensurate with traditional non-destructive evaluation (NDE) methods. The in situ monitoring methodology was then applied to an industrially relevant component that was using post-build NDE, highlighting the utility of the proposed method for hard-to-inspect AM components. As a direct result of this program, two journal manuscripts [1], [2] have been published in Additive Manufacturing, with additional manuscripts planned following program completion.

36 MATERIALS SCIENCE↗

The Advanced Technology Operations System: ATOS

Mission control systems supporting new space missions face ever-increasing requirements in terms of functionality, performance, reliability and efficiency. Modern data processing technology is providing the means to meet these requirements in new systems under development. During the past few years the European Space Operations Centre (ESOC) of the European Space Agency (ESA) has carried out a number of projects to demonstrate the feasibility of using advanced software technology, in particular, knowledge based systems, to support mission operations. A number of advances must be achieved before these techniques can be moved towards operational use in future missions, namely, integration of the applications into a single system framework and generalization of the applications so that they are mission independent. In order to achieve this goal, ESA initiated the Advanced Technology Operations System (ATOS) program, which will develop the infrastructure to support advanced software technology in mission operations, and provide applications modules to initially support: Mission Preparation, Mission Planning, Computer Assisted Operations, and Advanced Training. The first phase of the ATOS program is tasked with the goal of designing and prototyping the necessary system infrastructure to support the rest of the program. The major components of the ATOS architecture is presented. This architecture relies on the concept of a Mission Information Base (MIB) as the repository for all information and knowledge which will be used by the advanced application modules in future mission control systems. The MIB is being designed to exploit the latest in database and knowledge representation technology in an open and distributed system. In conclusion the technological and implementation challenges expected to be encountered, as well as the future plans and time scale of the project, are presented.

Kaufeler, J.-F.↗

TAE Plus: A conceptual view of TAE in the space station era

The use of the Transportable Applications Executive (TAE) for prototyping user interfaces has been the prime force behind the new TAE research and development work. The Data Systems Technology Division at GSFC is developing prototypes of user interfaces for different functions involved in the operation, analysis and data communication of space station payloads. TAE is a valuable prototyping tool because it enables a developer to build an entire application user interface model and run it without writing a single line of application code. One force driving new development is the need to update TAE's user interface to support the latest interactive graphic device technology. The current TAE, TAE Classic, uses interface techniques designed for an 80x24 character monochrome alphanumeric terminal, but does not effectively utilize features such as windowing, graphics, color, and selection devices available on newer workstations. To meet our needs, development of a TAE Plus began in FY-86 and involves augmenting TAE with three different sets of tools: a user interface toolkit; an application toolkit; and run-time service subroutines. A phased approach is being used to develop TAE Plus. In the first phase, we have met the needs of the user community and provided some support for rapid prototyping by developing a TAE Facelift, which adds an enhanced TAE interface (with windowing, mouse interaction, pull-down menus, etc.) to a select set of graphic workstations. The TAE Facelift allows many new concepts to be tested quickly for feedback and performance. In the second phase, a fully-integrated user interface management system, TAE Plus, will be built that supports the separation of interface from application, with the concomitant ability to prototype and rapidly change interfaces. This robust functionality will support, in an integrated manner, an application's development cycle from the prototype step through to the fully operational system.

Szczur, Martha↗