Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TUNING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Collecting EUV mask images through focus by wavelength tuning

Using an extreme-ultraviolet (EUV) microscope to produce high-quality images of EUV reticles, we have developed a new wavelength tuning method to acquire through-focus data series with a higher level of stability and repeatability than was previously possible. We utilize the chromatic focal-length dependence of a diffractive Fresnel zoneplate objective lens, and while holding the mask sample mechanically still, we tune the wavelength through a narrow range, in small steps. In this paper, we demonstrate the method and discuss the relative advantages that this data collection technique affords.

36 MATERIALS SCIENCE↗

Control System Design for Automatic Cavity Tuning Machines

A series of four automatic tuning machines for 9-cell TESLA-type cavities are being developed and fabricated in a collaborative effort among DESY, FNAL, and KEK. These machines are intended to support high-throughput cavity fabrication for construction of large SRF-based accelerator projects. Two of these machines will be delivered to cavity vendors for the tuning of XFEL cavities. The control system for these machines must support a high level of automation adequate for industrial use by non-experts operators. This paper describes the control system hardware and software design for these machines.

43 PARTICLE ACCELERATORS↗

Dynamically tuned high-Q AC-dipole implementation

AC-dipole magnets are typically implemented as a parallel LC resonant circuit. To maximize efficiency, it's beneficial to operate at a high Q. This, however, limits the magnet to a narrow frequency range. Current designs therefore operate at a low Q to provide a wider bandwidth at the cost of efficiency. Dynamically tuning a high Q resonant circuit tries to maintain a high efficiency while providing a wide frequency range. The results of ongoing efforts at BNL to implement dynamically tuned high-Q AC dipoles will be presented.

43 PARTICLE ACCELERATORS↗

The GFDL Global Atmosphere and Land Model AM4.0/LM4.0: 2. Model Description, Sensitivity Studies, and Tuning Strategies

Here, in Part 2 of this two–part paper, documentation is provided of key aspects of a version of the AM4.0/LM4.0 atmosphere/land model that will serve as a base for a new set of climate and Earth system models (CM4 and ESM4) under development at NOAA's Geophysical Fluid Dynamics Laboratory (GFDL). The quality of the simulation in AMIP (Atmospheric Model Intercomparison Project) mode has been provided in Part 1. Part 2 provides documentation of key components and some sensitivities to choices of model formulation and values of parameters, highlighting the convection parameterization and orographic gravity wave drag. The approach taken to tune the model's clouds to observations is a particular focal point. Care is taken to describe the extent to which aerosol effective forcing and Cess sensitivity have been tuned through the model development process, both of which are relevant to the ability of the model to simulate the evolution of temperatures over the last century when coupled to an ocean model.

54 ENVIRONMENTAL SCIENCES↗

Strain tuning and strong enhancement of ionic conductivity in SrZrO 3 -RE 2 O 3 (RE = Sm, Eu, Gd, Dy, and Er) nanocomposite films

Fast ion transport channels at interfaces in thin films have attracted great attention due to a range of potential applications for energy materials and devices, for, solid oxide fuel cells, sensors, and memories. Here, it is shown that in vertical nanocomposite heteroepitaxial films of SrZrO 3 –RE 2 O 3 (RE = Sm, Eu, Gd, Dy, and Er) the ionic conductivity of the composite can be tuned and strongly enhanced using embedded, stiff, and vertical nanopillars of RE 2 O 3 . With increasing lattice constant of RE 2 O 3 from Er 2 O 3 to Sm 2 O 3 , it is found that the tensile strain in the SrZrO 3 increases proportionately, and the ionic conductivity of the composite increases accordingly, by an order of magnitude. Lastly, the results here conclusively show, for the first time, that strain in films can be effectively used to tune the ionic conductivity of the materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electric Field Tuning Molecular Packing and Electrical Properties of Solution-Shearing Coated Organic Semiconducting Thin Films

Recent improvements in solution-coated organic semiconductors (OSCs) evidence their high potential for cost-efficient organic electronics and sensors. Molecular packing structure determines the charge transport property of molecular solids. However, it remains challenging to control the molecular packing structure for a given OSC. Here, the application of alternating electric fields is reported to fine-tune the crystal packing of OSC solution-shearing coated at ambient conditions. First, a theoretical model based on dielectrophoresis is developed to guide the selection of the optimal conditions (frequency and amplitude) of the electric field applied through the solution-shearing blade during coating of OSC thin films. Next, electric field-induced polymorphism is demonstrated for OSCs with both herringbone and 2D brick-wall packing motifs in 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene and 6,13-bis(triisopropylsilylethynyl) pentacene, respectively. Favorable molecular packing can be accessible in some cases, resulting in higher charge carrier mobilities. In conclusion, this work provides a new approach to tune the properties of solution-coated OSCs in functional devices for high-performance printed electronics.

36 MATERIALS SCIENCE↗

Over 15% Efficiency Polymer Solar Cells Enabled by Conformation Tuning of Newly Designed Asymmetric Small‐Molecule Acceptors

Abstract The prosperous period of polymer solar cells (PSCs) has witnessed great progress in molecule design methods to promote power conversion efficiency (PCE). Designing asymmetric structures has been proved effective in tuning energy level and morphology, which has drawn strong attention from the PSC community. Two hepta‐ring and octa‐ring asymmetric small molecular acceptors (SMAs) (IDTP‐4F and IDTTP‐4F) with S‐shape and C‐shape confirmations are developed to study the relationship between conformation shapes and PSC efficiencies. The similarity of absorption and energy levels between two SMAs makes the conformation a single variable. Additionally, three wide‐bandgap polymer donors (PM6, S1, and PM7) are chosen to prove the universality of the relationship between conformation and photovoltaic performance. Consequently, the champion PCE afforded by PM7: IDTP‐4F is as high as 15.2% while that of PM7: IDTTP‐4F is 13.8%. Moreover, the S‐shape IDTP‐4F performs obviously better than their IDTTP‐4F counterparts in PSCs regardless of the polymer donors, which confirms that S‐shape conformation performs better than the C‐shape one. This work provides an insight into how conformations of asymmetric SMAs affect PCEs, specific functions of utilizing different polymer donors to finely tune the active‐layer morphology and another possibility to reach an excellent PCE over 15%.

Guo, Qing↗

Transferring Liquid Metal to form a Hybrid Solid Electrolyte via a Wettability-Tuning Technology for Lithium-Metal Anodes

Integrating solid-state electrolyte (SSE) into Li-metal anodes has demonstrated great promise to unleash the high energy density of rechargeable Li-metal batteries. However, fabricating a highly cyclable SSE/Li-metal anode remains a major challenge because the densification of the SSE is usually incompatible with the reactive Li metal. Here, a liquid-metal-derived hybrid solid electrolyte (HSE) is proposed, and a facile transfer technology to construct an artificial HSE on the Li metal is reported. By tuning the wettability of the transfer substrates, electron- and ion-conductive liquid metal is sandwiched between electron-insulating and ion-conductive LiF and oxides to form the HSE. The transfer technology renders the HSE continuous, dense, and uniform. The HSE, having high ion transport, electron shut-off, and mechanical strength, makes the composite anode deliver excellent cyclability for over 4000 h at 0.5 mA cm(-2) and 1 mAh cm(-2) in a symmetrical cell. When pairing with LiFePO4 and sulfur cathodes, the HSE-coated Li metal dramatically enhances the performance of full cells. Therefore, this work demonstrates that tuning the interfacial wetting properties provides an alternate approach to build a robust solid electrolyte, which enables highly efficient Li-metal anodes.

li-metal anodes↗

Tuning Organic Electrochemical Transistor Threshold Voltage using Chemically Doped Polymer Gates

Organic electrochemical transistors (OECTs) have shown promise as transducers and amplifiers of minute electronic potentials due to their large transconductances. Tuning the OECT threshold voltage is important to achieve low-powered devices with amplification properties within the desired operational voltage range. However, traditional design approaches have struggled to decouple channel and materials properties from threshold voltage, thereby compromising on several other OECT performance metrics, such as electrochemical stability, transconductance, and dynamic range. In this work, simple solution-processing methods are utilized to chemically dope polymer gate electrodes, thereby controlling their work function, which in turn tunes the operation voltage range of the OECTs without perturbing their channel properties. Chemical doping of initially air-sensitive polymer electrodes further improves their electrochemical stability in ambient conditions. Thus, OECTs that are simultaneously low-powered and electrochemically resistant to oxidative side reactions under ambient conditions are demonstrated. Furthermore, this approach shows that threshold voltage, which is once interwoven with other OECT properties, can in fact be an independent design parameter, expanding the design space of OECTs.

chemical doping↗

Tuning the Spin Transition and Carrier Type in Rare-Earth Cobaltates via Compositional Complexity

There is growing interest in material candidates with properties that can be engineered beyond traditional design limits. Compositionally complex oxides (CCO), often called high entropy oxides, are excellent candidates, wherein a lattice site shares more than four cations, forming single-phase solid solutions with unique properties. However, the nature of compositional complexity in dictating properties remains unclear, with characteristics that are difficult to calculate from first principles. Here, in this study, compositional complexity is demonstrated as a tunable parameter in a spin-transition oxide semiconductor La 1- x (Nd, Sm, Gd, Y) x/4 CoO 3 , by varying the population x of rare earth cations over 0.00≤ x≤ 0.80. Across the series, increasing complexity is revealed to systematically improve crystallinity, increase the amount of electron versus hole carriers, and tune the spin transition temperature and on-off ratio. At high a population (x = 0.8), Seebeck measurements indicate a crossover from hole-majority to electron-majority conduction without the introduction of conventional electron donors, and tunable complexity is proposed as new method to dope semiconductors. First principles calculations combined with angle resolved photoemission reveal an unconventional doping mechanism of lattice distortions leading to asymmetric hole localization over electrons. Thus, tunable complexity is demonstrated as a facile knob to improve crystallinity, tune electronic transitions, and to dope semiconductors beyond traditional means.

36 MATERIALS SCIENCE↗

Uniaxial Strain Tuned Magnetism of the Altermagnet Candidate H-FeS

Altermagnets are a newly recognized class of magnetic materials characterized by compensated spin configurations while still breaking time-reversal symmetry and exhibiting unconventional transport phenomena. Hexagonal FeS (h-FeS) is a recently identified altermagnet candidate that shows a spontaneous anomalous Hall effect (AHE) accompanied by a tiny net magnetization. Here, we show that both the spontaneous AHE and magnetization can be effectively suppressed by an in-plane compressive strain. Since neutron diffraction measurements show that the applied uniaxial strain only modifies the in-plane domain population but does not affect the in-plane magnetic structure, the major effect of the applied strain is to tune the small 𝑐-axis ferromagnetic moment. Our results demonstrate a strong correlation between the tiny net magnetization and the spontaneous AHE in h-FeS, and show that uniaxial strain provides an effective knob to tune both properties in this altermagnet candidate for spintronic applications.

Yao, Weiliang [ORNL]↗

Hydrostatic and Uniaxial Pressure Tuning of Iron-Based Superconductors: Insights into Superconductivity, Magnetism, Nematicity, and Collapsed Tetragonal Transitions

Iron-based superconductors are well-known for their intriguing phase diagrams, which manifest a complex interplay of electronic, magnetic and structural degrees of freedom. Among the phase transitions observed are superconducting, magnetic, and several types of structural transitions, including a tetragonal-to-orthorhombic and a collapsed-tetragonal transition. In particular, the widely-observed tetragonal-to-orthorhombic transition is believed to be a result of an electronic order that is coupled to the crystalline lattice and is, thus, referred to asnematic transition. Nematicity is therefore a prominent feature of these materials, which signals the importance of the coupling of electronic and lattice properties. Correspondingly, these systems are particularly susceptible to tuning via pressure (hydrostatic, uniaxial, or some combination). We review efforts to probe the phase diagrams of pressure-tuned iron-based superconductors, with a strong focus on our own recent insights into the phase diagrams of several members of this mate-rial class under hydrostatic pressure. These studies on FeSe, Ba(Fe 1-x Co x ) 2 As 2 , Ca(Fe 1-x Co x ) 2 As 2 and CaK(Fe 1-x Ni x ) 4 As 4 were, to a significant extent, made possible by advances of what measurements can be adapted to the use under differing pressure environments. We point out the potential impact of these tools for the study of the wider class of strongly correlated electron systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoporous Materials Can Tune the Critical Point of a Pure Substance

Abstract Molecular simulations and NMR relaxometry experiments demonstrate that pure benzene or xylene confined in isoreticular metal–organic frameworks (IRMOFs) exhibit true vapor–liquid phase equilibria where the effective critical point may be reduced by tuning the structure of the MOF. Our results are consistent with vapor and liquid phases extending over many MOF unit cells. These results are counterintuitive since the MOF pore diameters are approximately the same length scale as the adsorbate molecules. As applications of these materials in catalysis, separations, and gas storage rely on the ability to tune the properties of adsorbed molecules, we anticipate that the ability to systematically control the critical point, thereby preparing spatially inhomogeneous local adsorbate densities, could add a new design tool for MOF applications.

Braun, Efrem↗

Nanoporous Materials Can Tune the Critical Point of a Pure Substance

Molecular simulations and NMR relaxometry experiments demonstrate that pure benzene or xylene confined in isoreticular metal-organic frameworks (IRMOFs) exhibit true vapor-liquid phase equilibria where the effective critical point may be reduced by tuning the structure of the MOF. Our results are consistent with vapor and liquid phases extending over many MOF unit cells. These results are counterintuitive since the MOF pore diameters are approximately the same length scale as the adsorbate molecules. As applications of these materials in catalysis, separations, and gas storage rely on the ability to tune the properties of adsorbed molecules, we anticipate that the ability to systematically control the critical point, thereby preparing spatially inhomogeneous local adsorbate densities, could add a new design tool for MOF applications.

36 MATERIALS SCIENCE↗

Tuning the Redox Properties of a Nonheme Iron(III)-Peroxo Complex Binding Redox-Inactive Zinc Ions by Water Molecules

Here we report redox-inactive metal ions play important roles in tuning chemical properties of metal–oxygen intermediates. We describe the effect of water molecules on the redox properties of a nonheme iron(III)–peroxo complex binding redox-inactive metal ions. The coordination of two water molecules to a Zn 2+ ion in (TMC)Fe III -(O 2 )-Zn(CF 3 SO 3 ) 2 (1-Zn 2+ ) decreases the Lewis acidity of the Zn 2+ ion, resulting in the decrease of the one-electron oxidation and reduction potentials of 1-Zn 2+ . This further changes the reactivities of 1-Zn 2+ in oxidation and reduction reactions; no reaction occurred upon addition of an oxidant (e.g., cerium(IV) ammonium nitrate (CAN)) to 1-Zn 2+ , whereas 1-Zn 2+ coordinating two water molecules, (TMC)Fe III -(O 2 )-Zn(CF 3 SO 3 ) 2 -(OH 2 ) 2 [1-Zn 2+ -(OH 2 ) 2 ], releases the O 2 unit in the oxidation reaction. In the reduction reactions, 1-Zn 2+ was converted to its corresponding iron(IV)–oxo species upon addition of a reductant (e.g., a ferrocene derivative), whereas such a reaction occurred at a much slower rate in the case of 1-Zn 2+ -(OH 2 ) 2 . Finally, the present results provide the first biomimetic example showing that water molecules at the active sites of metalloenzymes may participate in tuning the redox properties of metal–oxygen intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fine-Tuning the Properties of Doped Multifunctional Materials by Controlled Reduction of Dopants

The physical properties of doped multifunctional compounds are commonly tuned by controlling the amount of dopants, but this control is limited because all the properties are influenced simultaneously by this single parameter. We present a strategy that enables the fine-tuning of a specific combination of properties by controlling the reduction of dopants. The feasibility of this approach was demonstrated by optimizing the near-IR photoluminescence of strontium titanate SrTiO 3 :Ni for potential applications in biomedicine for a range of absorbance in the visible/near-IR region. We discussed how material properties, such as luminescence, conductivity, or photocatalytic properties can be designed by carefully controlling the ratio of dopants in different oxidation states.

36 MATERIALS SCIENCE↗

Differentiating Ligand Tailoring and Cation Incorporation as Strategies for Tuning Heterobimetallic Cerium Complexes

Tuning of redox-active complexes featuring metals with high coordination numbers by incorporation of secondary redox-inactive cations has received far less attention than it deserves. Here, appending moderate steric bulk to a tripodal ligand framework has been tested for its influence on secondary-cation-driven structural and electrochemical tuning of cerium, a lanthanide that tends to adopt high coordination numbers. A quasi -C 3 -symmetric cerium(III) complex denoted [Ce] has been prepared that features pendant benzyloxy groups, and this work demonstrates that this species offers a site capable of binding single Na + or Ca 2+ ions. Electrochemical and UV-visible spectroscopic studies reveal equilibrium binding affinity of [Ce] for Na + in acetonitrile solvent, contrasting with tight binding of all cations in all other previously studied systems of this type. The modulated cation binding can be attributed to the bulky benzyloxy groups, which impact the thermodynamics of cation binding but do not impede the formation of cerium centers with coordination number 8 upon binding of either Na + or Ca2 + . Finally, the Ce(IV/III) reduction potential was found to be tunable under the equilibrium binding conditions, highlighting the potentially significant role that controlled structural changes can play in modulating the solution properties of heterobimetallic complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning Structural and Electronic Configuration of FeN 4 via External S for Enhanced Oxygen Reduction Reaction

The Fe–N–C material represents an attractive oxygen reduction reaction electrocatalyst, and the FeN 4 moiety has been identified as a very competitive catalytic active site. Fine tuning of the coordination structure of FeN 4 has an essential impact on the catalytic performance. Herein, we construct a sulfur‐modified Fe–N–C catalyst with controllable local coordination environment, where the Fe is coordinated with four in‐plane N and an axial external S. The external S atom affects not only the electron distribution but also the spin state of Fe in the FeN 4 active site. The appearance of higher valence states and spin states for Fe demonstrates the increase in unpaired electrons. With the above characteristics, the adsorption and desorption of the reactants at FeN 4 active sites are optimized, thus promoting the oxygen reduction reaction activity. This work explores the key point in electronic configuration and coordination environment tuning of FeN 4 through S doping and provides new insight into the construction of M–N–C‐based oxygen reduction reaction catalysts.

25 ENERGY STORAGE↗