Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TOKAMAK DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Overview of KSTAR ICRF Experiments in 2008

KSTAR is a national superconducting tokamak with the aim of a high beta operation based on AT scenarios, and ICRF heating is one of the essential tools to achieve this goal. After 12 years R and D works, ICRF system including the 2 MW transmitter and antenna was installed in 2007 and it was used for KSTAR first plasma events in 2008. In this paper, the installation processes of the ICRF system with an emphasis on the quality assurance procedures of KSTAR, as well as the results from the first RF discharge experiments for a discharge cleaning and FWEH experiments are outlined and future plan is shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Search for Suitable ICRF Operation Window for the Shaped H-mode Operation of KSTAR

KSTAR will try to achieve its 1st shaped H-mode plasma in 2010 campaign. The available power is limited by our plan for auxiliary heating system. Up to 2010, NBI with 1 MW, LHCD 0.5 MW, and ECH with 0.5 MW power will be prepared. To accomplish high beta plasma, TF magnetic field will be reduced to 2 T from rated field of 3.5 T. In this case the ECH contribution to H-mode power threshold requirement is ignorant because the 84 GHz frequency does not meet neither fundamental nor second harmonic resonance in the discharge area. Therefore the ICRF heating should carry out important roll to reach power threshold. The ICRF system of tunable frequency from 30 to 60 MHz will come with 1 MW power in 2010. To maximize the ICRF heating efficiency for H-mode purpose, we try to find suitable condition of ICRF heating parameters through the simulation using by TORIC code. Optimizations of RF frequency, toroidal modes controllable by 4 current straps, and the minority concentration are performed. Possibilities of second harmonic heating of minority and the mode converted heating near resonance layer are also studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Use of EBG in ICRF and LH Launcher

High impedance surfaces or electromagnetic band gap (EBG) surfaces have proved themselves to be useful in wireless communications applications due to their unique characteristics such as no propagating surface wave support, no conduction of RF current for a given bandwidth, in-phase electromagnetic reflection and non-inverted image of the electric charge in front of them. These characteristics make possible to design compact antennas achieving better performance in terms of radiation and input impedance. ICRF and LH antennas in plasma experiments can take advantage of using EBG surfaces. One of the main issues in ICRF plasma heating is the low power coupling of the plasma facing antenna. The adoption of EBG surfaces in the ICRF antenna structure and the advantages offered by a predictive designing tool as TOPICA offer the possibility to improve significantly the coupled power to plasma. The adoption of EBG surfaces in the LH waveguides permits to reduce the major dimension of waveguides not affecting drastically the propagation. It is then possible to manufacture more compact LH arrays of waveguides.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control and Data Acquisition System for KSTAR ICRF

An ICRF discharge cleaning and a plasma heating experiment were performed in KSTAR toka-mak. For an automated operation and the diagnostics of the ICRF system, the ICRF local network was designed and implemented. This internal network provides monitoring, RF protection, remote control and RF diagnostics. All the functions of the control system were realized by customized DSP units. The DSP units were tied by a local network in parallel. For RF diagnostics, a detector based on digital I/Q demodulation technique was fabricated. The I/Q detector collects the RF amplitude and phase at the same time without errors from I/Q imbalance inherent in an analog counterpart. During the first experimental campaign of the KSTAR tokamak, the control system was operated as expected without any major problems such as affecting the tokamak operation. The transmitter was protected from the harmful over-voltage events through a reliable operation of the system. Details of ICRF control system and RF detecting technique with a brief experimental result will be presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of LHCD efficiency on the FT-2 tokamak

The paper pays the main attention to the LHCD efficiency in experiments on the FT-2 tokamak. LH wave spectra P(N{sub z}) excited by the grill computed by GRILL3D code are presented. Physical processes responsible for termination of the CD with density rise are discussed for lower and higher plasma currents that are for relatively cold and relatively hot plasmas. A role of parametric processes and additional impurity influx for CD switching-off in the plasma are considered for those conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Full-Wave Studies of Lower Hybrid Wave Propagation in Tokamaks

A full-wave electromagnetic field solver valid the lower hybrid range of frequencies (LHRF) has been developed that utilizes a semi-spectral representation for the RF electric field. Spurious numerical behavior of the field solver that was found to be related to the inclusion of finite electron Larmor radius terms in the wave equation is discussed. The removal of these terms is shown to eliminate all spurious mode generation, leading to well-behaved electric field solutions for parameters typical of LH current drive experiments in present day sized tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Proposal on LHCD Experiments in Spherical Tokamaks

A new approach for LHCD problem in spherical tokamaks (ST) is investigated, when the LH waves are slowed down in poloidal rather than toroidal direction by a grill antenna oriented vertically. Characteristics of wave propagation are found by ray tracing technique modernized for the case of strongly inhomogeneous plasma in ST. RF field distribution in ST plasma was simulated by 2D full-wave code. The grill operation is analyzed in these conditions using 3D antenna code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron Bernstein Wave Experiments at the WEGA Stellarator

Fundamental investigations on EBW excitation, propagation and absorption are presented. In particular the OXB mode conversion and EBW current drive with 2.45 GHz EBWs are investigated and compared with modeling. High density operation with 28 GHz EBWs could be achieved at 0.5 T (2nd harmonic). This regime is characterized by a additional strongly supra-thermal electron distribution with energies >10 keV. These electrons were detected by measurement of the EBW emission and by X-ray detection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Equilibrium Analysis of EC-Sustained and RF-Sustained ST Plasmas

Plasma current start-up and formation of the ST configuration without the use of the central solenoid is a critical issue in ST research. In the TST-2 spherical tokamak (R = 0.38 m, a = 0.25 m), sustainment of an ECRF (2.45 GHz) produced ST plasma by low frequency (21 MHz) RF power alone was demonstrated. Since direct RF current drive can be ruled out, this result implies that the ST configuration is sustained entirely by pressure-driven currents. The Grad-Shafranov equilibrium was generalized to take into account the open field line region with finite plasma current and pressure (truncated equilibrium). In addition to the precessional current of trapped particles, Pfirsch-Schlueter current flowing along the open field line (and partially returning through the vacuum vessel) contributes to the toroidal plasma current. Three phases of plasma start-up are analyzed: (i) the current formation phase, (ii) the current jump phase, and (iii) the current sustainment phase. In the current formation phase, the plasma current is formed and increases slowly, roughly proportional to the stored energy. Closed flux surfaces do not exist and the current density profile is peaked on the outboard side. Once the plasma current increases beyond a critical value (approximately equal to the level necessary to satisfy the major radial force balance), the plasma current increases rapidly (current jump). Closed flux surfaces appear not at the beginning, but at the end of the current jump. In the sustainment phase, plasma has a high poloidal beta, {beta}{sub p} O(1). The equilibrium is characterized by the hollowness of the current density profile, which also determines the fraction of the plasma current inside the last closed flux surface. The plasma equilibrium does not differ greatly between EC-sustained and RF-sustained plasmas. However, RF-sustained plasmas are more turbulent, with larger fluctuation levels over a wide frequency band (0-20 kHz), and in many cases MHD activity in the 5-10 kHz frequency band increases rapidly and terminates the discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ECH-assisted startup at KSTAR

The electron cyclotron heating (ECH)-assisted startup was successful in the Korea Superconducting Tokamak Advanced Research (KSTAR) first plasma campaign completed in June, 2008. It was observed that the second harmonic EC wave of 0.35 MW was sufficient to achieve breakdown in the ECH pre-ionization phase, to allow burn through, and to sustain the plasma during the current ramp with a low loop voltage of 2.0 V. This corresponds to a toroidal electric field of 0.24 Vm{sup -1} at the innermost vacuum vessel wall (R = 1.3 m). Since there is no feedback control of the plasma radial position in the initial phase of the KSTAR first plasma campaign, wall contact caused the plasma current fall to zero soon after the ECH beam was turned off. Extending pulse duration of the ECH power to 190 ms allowed the plasma current to rise up to more than 100 kA with a ramp-up rate of 0.8 MA/s and the pulse duration of 210 ms. Later in the first plasma campaign, the plasma was sustained up to 865 ms with the help of additional heating of 350-ms long ECH beam and with the help of the plasma radial position feedback control. The plasma current in the pre-ionization phase was observed and it is considered to be pressure-driven Pfirsch-Schlueter current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A 2D finite element wave equation solver based on triangular base elements

A finite element method based on the subdivision of the physical domain in triangular sub-domains in which simple local 'areale' coordinates are adopted is explored. The advantage of the method is that it straightforwardly allows grid refinement in regions where higher precision is required. The plasma model was kept simple for this 'proof-of-principle' exercise. Rather than accounting for the actual differential or integro-differential dielectric tensor, its locally uniform plasma equivalent was adopted for 3 possible choices: the cold plasma response, the full hot Stix/Swanson plasma tensor retaining all orders in finite Larmor radius (FLR) and the more common hot tensor, truncated at terms of second order in the Larmor radius.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma Surface Presented as Array of Virtual Ports

Calculations aimed at representing the plasma-vacuum boundary condition in real space are presented. Some ideas about how this representation can be used for power coupling analysis and antenna modeling are put forward. The relation between tangential electric and magnetic fields on the plasma surface is linear and customary expressed in the spectral domain for every partial wave via 2x2 plasma impedance matrix - Z{sup p}(k{sub y},K{sub z}). In this work, the tangential fields E-vector{sub t} and B-vector{sub t} on the plasma surface are projected on a suitably chosen set of basis functions. Then the linear operator relating the components E-vector{sub t} and B-vector{sub t} expressed in such a way is derived from the known matrix Z{sup p}(k{sub y},K{sub z}). It is shown that in this representation the plasma surface has properties similar to the array of ports of a microwave system and can be formally described by a corresponding impedance matrix in the way it is done in microwave analysis. The obtained representation can be exploited for deeper understanding of the RF power coupling to the plasmas, antenna modeling, measurements of plasma electromagnetic properties and for plasma modeling with suitably designed structures or metamaterials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time-Domain Simulation of RF Couplers

We have developed a finite-difference time-domain (FDTD) fluid-like approach to integrated plasma-and-coupler simulation [1], and show how it can be used to model LH and ICRF couplers in the MST and larger tokamaks.[2] This approach permits very accurate 3-D representation of coupler geometry, and easily includes non-axi-symmetry in vessel wall, magnetic equilibrium, and plasma density. The plasma is integrated with the FDTD Maxwell solver in an implicit solve that steps over electron time-scales, and permits tenuous plasma in the coupler itself, without any need to distinguish or interface between different regions of vacuum and/or plasma. The FDTD algorithm is also generalized to incorporate a time-domain sheath potential [3] on metal structures within the simulation, to look for situations where the sheath potential might generate local sputtering opportunities. Benchmarking of the time-domain sheath algorithm has been reported in the references. Finally, the time-domain software [4] permits the use of particles, either as field diagnostic (test particles) or to self-consistently compute plasma current from the applied RF power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mixed augmented variational formulation (MAVF) for lower hybrid full-wave calculations

In the continuation of the works led in cylindrical geometry, a full toroidal description for an arbitrary poloidal cross-section of the plasma has been developed. For simulation purpose a mixed augmented variational formulation (MAVF), which is particularly well suited for solving Maxwell equations, is considered. The discretization of the MAVF is carried out using Taylor-Hood P2-iso-P1 finite elements. This formulation provide a natural implementation for parallel processing, a particularly important aspect when simulations for plasmas of large size must be considered. Details on the specific application of the MAVF to the LH problem are presented, as well as the structure of the corresponding matrices. A first application to a realistic small tokamak configuration is considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On Possibility of Low Threshold Parametric Decay Back Scattering Instabilities in Tokamak ECRH Experiments

The experimental conditions leading to reduction of backscattering decay instability threshold in tokamak ECRH experiments are analyzed. It is shown that substantial reduction of the threshold is provided by localization of lower hybrid or ion Bernstein decay waves possible due to non monotonous profile of plasma density in the central region or in the vicinity of magnetic island. The corresponding pump power threshold and decay wave amplification is calculated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamic programming based time-delay estimation technique for analysis of time-varying time-delay

A new time-delay estimation (TDE) technique based on dynamic programming is developed to measure the time-varying time-delay between two signals. The dynamic programming based TDE technique provides a frequency response five to ten times better than previously known TDE techniques, namely, those based on time-lag cross-correlation or wavelet analysis. Effects of frequency spectrum, signal-to-noise ratio, and amplitude of time-delay on response of the TDE technique (represented as transfer function) are studied using simulated data signals. The transfer function for the technique decreases with increase in noise in signal; however it is independent of signal spectrum shape. The dynamic programming based TDE technique is applied to the beam emission spectroscopy diagnostic data to measure poloidal velocity fluctuations, which led to the observation of theoretically predicted zonal flows in high-temperature tokamak plasmas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fast integrator based data acquisition system for the SST-1 Thomson scattering system

An operational transconductance amplifier based fast charge-integrating module (FCIM) is designed and developed for an easy acquisition of fast Thomson scattered and background signal. FCIM based data acquisition technique can be used for the measurement of charge pulses of <20 ns duration. The response of the module is tested using a standard pulsed charge-generating module. The measuring charge range of the module depends on the integrating capacitor. Comparison of the performance of FCIM to commercially available module shows that it has better dynamic range with higher sensitivity and less measurement error. The module is quite cost effective and has many new features.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Plasma column displacement measurements by modified Rogowski sine-coil and Biot-Savart/magnetic flux equation solution on IR-T1 tokamak

The modified Rogowski sine-coil (MRSC) has been designed and implemented for the plasma column horizontal displacement measurements on small IR-T1 tokamak. MRSC operation has been examined on test assembly and tokamak. Obtained results show high sensitivity to the plasma column horizontal displacement and negligible sensitivity to the vertical displacement; linearity in wide, {+-}0.1 m, range of the displacements; and excellent, 1.5%, agreement with the results of numerical solution of Biot-Savart and magnetic flux equations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗