Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TOKAMAK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Numerical simulation of drift-resistive ballooning turbulence in the presence of the GA mode in the plasma edge tokamak

Drift-resistive ballooning turbulence is simulated numerically based on a quasi-three-dimensional computer code for solving nonlinear two-fluid MHD equations in the scrape-off layer plasma in a tokamak. It is shown that, when the toroidal geometry of the magnetic field is taken into account, additional (geodesic) flux terms associated with the first poloidal harmonic ({approx}sin{theta}) arise in the averaged equations for the momentum, density, and energy. Calculations show that the most important of these terms is the geodesic momentum flux (the Stringer-Windsor effect), which lowers the poloidal rotation velocity. It is also shown that accounting for the toroidal field geometry introduces experimentally observed, special low-frequency MHD harmonics-GA modes-in the Fourier spectra. GA modes are generated by the Reynolds turbulent force and also by the gradient of the poloidally nonuniform turbulent heat flux. Turbulent particle and heat fluxes are obtained as functions of the poloidal coordinate and are found to show that, in a tokamak, there is a 'ballooning effect' associated with their maximum in the weak magnetic field region. The dependence of the density, temperature, and pressure on the poloidal coordinate is presented, as well as the dependence of turbulent fluxes on the toroidal magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structure of the controlled halo-current magnetic field in the T-10 tokamak

In the T-10 tokamak, the magnetic field spatially resonant with a helical MHD perturbation is generated using the controlled halo current supplied using a contact method in the scrape-off-layer plasma. This paper is concerned with studying the spatial structure of the halo current and its magnetic field. For this purpose, the magnetic field of the halo current was measured in one of the cross sections of the torus near the tokamak vacuum vessel wall. The spatial distribution of the magnetic field as a function of the halo current configuration was calculated in the cylindrical approximation. The terms proportional to the plasma pressure were disregarded. The configuration of the halo current and the spatial structure of its magnetic field were determined by comparing the calculated and experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of the safety factor inhomogeneity on collisionless current generation in tokamaks

An improved scaling for the current density generated due to collisionless motion of {alpha}-particles in a tokamak is proposed. The dependence of the current density on the radial profile of the safety factor q is investigated. Monotonically increasing q profiles are considered, as well as q profiles with a minimum in the axial region of the plasma column. It is shown that the current density depends on the variation in q along the charged particle trajectories, rather than on the q value at the starting magnetic surface. The dependence of the current density on the gradient of q is strongest in the plasma core because of the large deviation of the drift surfaces from the magnetic ones in this region. At the plasma edge, the larger the second derivative of the plasma density, the greater the contribution of the gradient of q. For conventional plasma density profiles, the poloidal-angle-averaged current density calculated for a varying safety factor q is always lower than that calculated for a constant q. The effect of the nonuniformity of the safety factor on the current generation at the magnetic axis of a tokamak is investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Current density distribution during disruptions and sawteeth in a simple model of plasma current in a tokamak

The processes that are likely to accompany discharge disruptions and sawteeth in a tokamak are considered in a simple plasma current model. The redistribution of the current density in plasma is supposed to be primarily governed by the onset of the MHD-instability-driven turbulent plasma mixing in a finite region of the current column. For different disruption conditions, the variation in the total plasma current (the appearance of a characteristic spike) is also calculated. It is found that the numerical shape and amplitude of the total current spikes during disruptions approximately coincide with those measured in some tokamak experiments. Under the assumptions adopted in the model, the physical mechanism for the formation of the spikes is determined. The mechanism is attributed to the diffusion of the negative current density at the column edge into the zero-conductivity region. The numerical current density distributions in the plasma during the sawteeth differ from the literature data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parameters of turbulent structures at the periphery of the FT-2 tokamak

Results are presented from probe measurements carried out in the scrape-off layer of the FT-2 tokamak in the course of additional lower hybrid heating, during which an L-H transition was observed. The objective of this study was to obtain information on the parameters of blobs-turbulent structures with enhanced plasma density. The measurements were performed not only on the low-field side of the torus, but also on the high-field side, which is still poorly studied. Coherent structures with radial velocities directed both toward the vessel wall and into the plasma column were revealed at the tokamak periphery. Blobs propagating toward the vessel wall were found to prevail both before and after the L-H transition. The average radial velocity of blobs in the L- and H-modes was determined experimentally. The dependence of the radial blob velocity on the transverse size and density of the structure agrees with the ballooning mode model. It is found that the average value of the poloidal blob velocity is four to five times higher than the average radial velocity. The results of measurements carried out on both sides of the torus indicate the presence of internal poloidal polarization of blobs. The average drift velocity of such polarized structures is directed toward the vessel wall. The L-H transition is accompanied by a reduction in the radial velocity. At the same time, the average plasma density inside the structures observed on the low-field side increases appreciably during the transition. The obtained dependences of the radial blob velocity on the plasma density inside the structure generally agree with predictions of the ballooning mode model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On local isodynamicity in tokamaks

It is shown that local isodynamicity (i.e., the constancy of the absolute value of the magnetic field on a magnetic surface) can take place at the periphery of the tokamak near the separatrix with an internal X point. An isodynamic layer including several magnetic surfaces cannot exist in a tokamak because the safety factor q is too low and the shape of the surfaces is predetermined. The layered and global isodynamicity is possible in pinches with low values of q (Palumbo's configuration).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characteristics of discharge disruptions in the T-10 tokamak

The results of experimental studies of discharge disruptions in the T-10 tokamak at the limiting plasma density are presented. On the basis of measurements of the generated soft X-ray emission, for a group of 'slow' disruptions, the dynamics of the magnetic configuration of the central part of the plasma column is studied and the possible role of the m/n = 1/1 mode in the excitation of predisruptions or the final stage of disruption is analyzed. It is shown that the characteristics of plasma electron cooling in predisruptions correspond to those of electron cooling upon pellet injection into T-10 and in discharge predisruptions occurring in regimes with the 'quiet mode.' It is found that, in the latter case, the reason for predisruptions and fast electron cooling in the plasma core is the instability of the m/n = 2/1 mode, its spontaneous spatial reconstruction, and the generation of a 'cooling wave' during this process. Measurements of the electron temperature (determined from the plasma radiation intensity at the second electron cyclotron harmonic) in the zone of the m/n = 2/1 mode have shown that the transformation of the m/n = 2/1 mode leads to the excitation of predisruptions and the final phase of disruption not only in regimes with the 'quiet mode,' but also in disruptions of ordinary ohmic discharges. The experimental results obtained in this work make it possible to determine the scenario of the development of 'slow' discharge disruptions in the T-10 tokamak at the limiting plasma density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Behavior of lithium ions in the turbulent near-wall tokamak plasma under heating of ions and electrons of the main plasma

Turbulent dynamics of the near-wall tokamak plasma is simulated by numerically solving the nonlinear reduced Braginskii magnetohydrodynamic equations with allowance for a lithium ion admixture. The effects of turbulence and radiation of the admixture are analyzed in the framework of a self-consistent approach. The radial distributions of the radiative loss power and the density of Li{sup 0} atoms and Li{sup +1} ions are obtained as functions of the electron and ion temperatures of the main plasma in the near-wall layer. The results of numerical simulations show that supply of lithium ions into the low-temperature near-wall plasma substantially depends on whether the additional power is deposited into the electron or ion component of the main plasma. If the electron temperature in the layer increases (ECR heating), then the ion density drops. At the same time, an increase in the temperature of the main ions (ICR heating) leads to an increase in the density of Li{sup +1} ions. The results of numerical simulations are explained by the different influence of the electron and ion temperatures on the atomic processes governing the accumulation and loss of particles in the balance equations for neutral Li{sup 0} atoms and Li{sup +1} ions in the admixture. The radial profile of the electron temperature and the corresponding distribution of the radiative loss power for different densities of neutral Li{sup 0} atoms on the wall are obtained. The calculations show that the presence of Li{sup +1} ions affects turbulent transport of the main ions. In this case, the electron heat flux increases by 20–30% with increasing Li{sup +1} density, whereas the flux of the main ions drops by nearly the same amount. The radial profile of the turbulent flux of lithium ions is obtained. It is demonstrated that the appearance of the pinch effect is related to the positive density gradient of lithium ions across the calculation layer. For the parameters of the T-10 tokamak, the effect of radiative cooling of the near-wall plasma layer becomes appreciable when the near-wall density of neutral lithium atoms exceeds 7 × 10{sup 11} cm{sup −3}. In this case, the density of radiative loss power in the center of the layer is estimated to be about 500–600 kW/m{sup 3}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Asymmetry of the Balmer-alpha line shape and recovery of the effective hydrogen temperature in the tokamak scrape-off layer

An algorithm for recovering the effective temperature of atoms of hydrogen (and its isotopes) in the tokamak scrape-off layer from the asymmetry of the Balmer-alpha line shape is proposed. The algorithm is based on the parametrization of the asymmetry of the line shape caused by the nonlocal character of neutral hydrogen flux from the wall into the tokamak plasma. The accuracy of the algorithm is tested against the results of simulations of the velocity distribution function of deuterium neutrals in the scrape-off layer by the EIRENE code with the use of the source data on the main plasma component in the quasi-stationary stage of the inductive mode of ITER operation calculated by the SOLPS4.3 (B2-EIRENE) code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tokamak plasma equilibrium problems with anisotropic pressure and rotation and their numerical solution

In the MHD tokamak plasma theory, the plasma pressure is usually assumed to be isotropic. However, plasma heating by neutral beam injection and RF heating can lead to a strong anisotropy of plasma parameters and rotation of the plasma. The development of MHD equilibrium theory taking into account the plasma inertia and anisotropic pressure began a long time ago, but until now it has not been consistently applied in computational codes for engineering calculations of the plasma equilibrium and evolution in tokamak. This paper contains a detailed derivation of the axisymmetric plasma equilibrium equation in the most general form (with arbitrary rotation and anisotropic pressure) and description of the specialized version of the SPIDER code. The original method of calculation of the equilibrium with an anisotropic pressure and a prescribed rotational transform profile is proposed. Examples of calculations and discussion of the results are also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermodynamic approach to the interpretation of self-consistent pressure profiles in a tokamak

The phenomenon of invariable pressure profiles in tokamaks is interpreted in the framework of the thermodynamic approach suggesting that invariable self-consistent states correspond to the minimum of free energy. Solutions qualitatively consistent with the experiment are obtained under the assumption that the mechanism for the formation of self-consistent profiles is directly related to equilibrium diamagnetic currents. The dynamics of the system and specific transport phenomena, such as energy and particle pinching and a decrease in the local density under auxiliary electron cyclotron resonance heating (density pump-out), are analyzed in the vicinity of an equilibrium state characterized by a stable pressure profile. The scaling for the energy confinement time deduced from the transport model agrees qualitatively with the ITER scaling based on the analysis of experimental data obtained in many tokamaks. The possibility of using generalized Tsallis statistics to analyze pressure profiles is considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Isotopic effect in experiments on lower hybrid current drive in the FT-2 tokamak

To analyze factors influencing the limiting value of the plasma density at which lower hybrid (LH) current drive terminates, the isotopic factor (the difference in the LH resonance densities in hydrogen and deuterium plasmas) was used for the first time in experiments carried out at the FT-2 tokamak. It is experimentally found that the efficiency of LH current drive in deuterium plasma is appreciably higher than that in hydrogen plasma. The significant role of the parametric decay of the LH pumping wave, which hampers the use of the LH range of RF waves for current drive at high plasma densities, is confirmed. It is demonstrated that the parameters characterizing LH current drive agree well with the earlier results obtained at large tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Formation of self-consistent pressure profiles in simulation of turbulent convection in tokamak plasmas

The formation of pressure profiles in turbulent tokamak plasmas in ohmic heating regimes and transient regimes induced by turning-on of electron-cyclotron resonance (ECR) heating is investigated. The study is based on self-consistent modeling of low-frequency turbulent plasma convection described by an adiabatically reduced set of hydrodynamic-type equations. The simulations show that, in the ohmic heating stage, turbulence forms and maintains profiles of the total plasma pressure corresponding to turbulent relaxed states. These profiles are close to self-consistent profiles of the total plasma pressure experimentally observed on the T-10 tokamak in ohmic regimes with different values of the safety factor q{sub L} at the limiter. Simulations of nonstationary regimes induced by turning-on of on- and off-axis ECR heating show that the total plasma pressure profiles in the transient regimes remain close to those in the turbulent-relaxed state, as well as to the profiles experimentally observed on T-10.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of the plasma radiation power in the Globus-M tokamak by means of SPD silicon photodiodes

Radiation losses from the plasma of the Globus-M tokamak are studied by means of SPD silicon photodiodes developed at the Ioffe Institute, Russian Academy of Sciences. The results from measurements of radiation losses in regimes with ohmic and neutral beam injection heating of plasmas with different isotope compositions are presented. The dependence of the radiation loss power on the plasma current and plasma–wall distance is investigated. The radiation power in different spectral ranges is analyzed by means of an SPD spectrometric module. Results of measurements of radiation losses before and after tokamak vessel boronization are presented. The time evolution of the sensitivity of the SPD photodiode during its two-year exploitation in Globus-M is analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of runaway electrons using the conditional average sampling method in the Damavand tokamak

Some experiments for studying the runaway electron (RE) effects have been performed using the poloidal magnetic probes system installed around the plasma column in the Damavand tokamak. In these experiments, the so-called runaway-dominated discharges were considered in which the main part of the plasma current is carried by REs. The induced magnetic effects on the poloidal pickup coils signals are observed simultaneously with the Parail–Pogutse instability moments for REs and hard X-ray bursts. The output signals of all diagnostic systems enter the data acquisition system with 2 Msample/(s channel) sampling rate. The temporal evolution of the diagnostic signals is analyzed by the conditional average sampling (CAS) technique. The CASed profiles indicate RE collisions with the high-field-side plasma facing components at the instability moments. The investigation has been carried out for two discharge modes—low-toroidal-field (LTF) and high-toroidal-field (HTF) ones—related to both up and down limits of the toroidal magnetic field in the Damavand tokamak and their comparison has shown that the RE confinement is better in HTF discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Geodesic acoustic modes in noncircular cross section tokamaks

The influence of the shape of the plasma cross section on the continuous spectrum of geodesic acoustic modes (GAMs) in a tokamak is analyzed in the framework of the MHD model. An expression for the frequency of a local GAM for a model noncircular cross section plasma equilibrium is derived. Amendments to the oscillation frequency due to the plasma elongation and triangularity and finite tokamak aspect ratio are calculated. It is shown that the main factor affecting the GAM spectrum is the plasma elongation, resulting in a significant decrease in the mode frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characteristics of major plasma discharge disruption in the Globus-M spherical tokamak

The characteristics of the major disruption of plasma discharges in the Globus-M spherical tokamak are analyzed. The process of current quench is accompanied by the loss of the vertical stability of the plasma column. The plasma boundary during the disruption is reconstructed using the algorithm of movable filaments. The plasma current decay is preceded by thermal quench, during which the profiles of the temperature and electron density were measured. The data on the time of disruption, the plasma current quench rate, and the toroidal current induced in the tokamak vessel are compared for hydrogen and deuterium plasmas. It is shown that the disruption characteristics depend weakly on the ion mass and the current induced in the vessel increases with the disruption time. The decay rate of the plasma toroidal magnetic flux during the disruption is determined using diamagnetic measurements. Such a decay is a source of the poloidal current induced in the vessel; it may also cause poloidal halo currents.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of Dynamics of Plasma Current Quench in the Globus-M Spherical Tokamak

Data on the dynamics of the plasma current quench in the Globus-M tokamak are presented. The main current quench characteristics at different toroidal magnetic fields are compared. The distribution of the toroidal current induced in the vessel wall is determined from magnetic measurements, and the electromagnetic loads acting on the vessel wall during the current quench are calculated. By extrapolating the experimental data, the additional pressure on the vessel wall during the current quench in the upgraded Globus-M2 tokamak is estimated. It is shown that the current quench results in the appearance of bending stresses in the vessel domes. Using numerical simulations, it is shown that the best agreement between the measured and calculated plasma current dynamics during the current quench corresponds to the linear (in time) influx of the carbon impurity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗