SEARCH · Engineering Papers

Results for “THREE-DIMENSIONAL MOTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Vertically reciprocating auger

The mathematical model and test results developed for the Vertically Reciprocating Auger (VRA) are summarized. The VRA is a device capable of transporting cuttings that result from below surface drilling. It was developed chiefly for the lunar surface, where conventional fluid flushing while drilling would not be practical. The VRA uses only reciprocating motion and transports material through reflections with the surface above. Particles are reflected forward and land ahead of radially placed fences, which prevent the particles from rolling back down the auger. Three input wave forms are considered to drive the auger. A modified sawtooth wave form was chosen for testing, over a modified square wave or sine wave, due to its simplicity and effectiveness. The three-dimensional mathematical model predicted a sand throughput rate of 0.2667 pounds/stroke, while the actual test setup transported 0.075 pounds/stroke. Based on this result, a correction factor of 0.281 is suggested for a modified sawtooth input.

Etheridge, Mark↗

NASA NTRS1989

Three-dimensional viscous drag prediction for rotor blades

The state-of-the-art in rotor blade drag prediction involves the use of two-dimensional airfoil tables to calculate the drag force on the blade. One of the most serious problems with the current methods is that they cannot be used for airfoils that have yet to be tested. Most of the drag prediction methods also do not take the Reynolds number or the rotational effects of the blade into account, raising doubts about the accuracy of the results. These problems are addressed with the development of an analytical method which includes the shape of airfoil, the effects of Reynolds number, and the rotational motion of the blade.

Chen, Ching S.↗

NASA NTRS1991

Studies of magnetopause structure

From the International Sun-Earth Explorers (ISEE) 1 magnetopause crossings on November 10, 1977, three-dimensional distribution functions for energetic ions were studied in the magnetosphere, through the magnetopause, and in the magnetosheath (Speiser and Williams, 1982). The particle distributions were particularly examined at and near the times that Russell and Elphic (1978) identified as flux transfer events (FTE). Using a simple, one-dimensional, quasi-static model, particle orbits were followed numerically, from the magnetosphere into the sheath. The inner, trapped, distribution initializes the distribution function. Liouville's theorem allows the inner distribution to be mapped into the sheath following the orbits. This mapping is shown for four mangetosheath ion flows (MIF's) corresponding to four flux transfer events. Results from the studies are discussed. A brief discussion of current sheet particle motion is presented.

Speiser, Theodore W.↗

NASA NTRS1990

Numerical simulation of particle-wave interaction in boundary layers

The effects of wall injection and particle motion on the spatial stability of two-dimensional plane channel flow are investigated. For this purpose, an accurate Navier-Stokes solver to simulate the space-time evolution of disturbances in three-dimensional flows has been developed. The code is operational on the NASA Langley CRAY2 and can be ported to any other supercomputer. The code has been tested extensively in tracking the spatial evolution of two-dimensional disturbances in plane channel flow and provided excellent agreement with the linear theory including at the inflow/outflow boundaries. Preliminary calculations have been performed to investigate the effects of stationary and moving sources of vortical disturbances simulating a particle traveling in the flow field. Results suggest that even at very low amplitudes, vortical disturbances act as amplifiers on the Tollmien-Schlichting waves promoting rapid instability. It is also found that slow moving particles are more dangerous than both stationary and fast moving particles for the same disturbance levels.

Biringen, S.↗

NASA NTRS1991

Stretched three-dimensional plasma equilibria with field-aligned flow

A three-dimensional equilibrium theory for stretched plasma configurations, such as the earth's magnetotail, is extended to include the effects of field-aligned flow. The MHD equations for this case can be solved in a general way by reduction to a set of ordinary differential equations and an ordinary integral. The solutions represent lowest-order solutions of an asymptotic expansion of the MHD equations for small electric field and weak time dependence. Simplified equations are presented for two-dimensional equilibria and for incompressible flow. Possible magnetospheric applications include the configuration of the geotail near and beyond the termination of the closed field line region, the steady motion of a plasmoid (a plasma bubble severed from the earth) through the distant geotail, and configurations at the magnetopause, the interface between the magnetosphere and the shocked solar wind plasma. For illustration, solutions for the steady motion of a two-dimensional plasmoid through the distant magnetotail are presented.

Birn, J.↗

NASA NTRS1991

Conical Euler simulation of wing rock for a delta wing planform

Unsteady, vortex-dominated flowfields are presently studied by using the conical Euler equations as an efficient first step toward investigation of the full three-dimensional problem, under the assumption that the supersonic flow about a delta wing is conical and therefore allows the three-dimensional problem to be reduced to a two-dimensional one. Attention is given to the case of a delta wing undergoing wing-rock motion. The code developed has also been modified to allow treatment of the 'free-to-roll' case.

Lee, Elizabeth M.↗

NASA NTRS1992

Three-dimensional time-marching aeroelastic analyses using an unstructured-grid Euler method

Modifications to a three dimensional, implicit, upwind, unstructured-grid Euler code for aeroelastic analysis of complete aircraft configurations are described. The modifications involve the addition of the structural equations of motion for their simultaneous time integration with the governing flow equations. The paper presents a detailed description of the time marching aeroelastic procedure and presents comparisons with experimental data to provide an assessment of the capability. Flutter results are shown for an isolated 45 degree swept-back wing and a supersonic transport configuration with a fuselage, clipped delta wing, and two identical rearward-mounted nacelles. Comparisons between computed and experimental flutter characteristics show good agreement, giving confidence in the accuracy of the aeroelastic capability that was developed.

Rausch, Russ D.↗

NASA NTRS1992

The dynamics and control of fluctuating pressure loads in the reattachment region of a supersonic free shear layer

An experimental program to investigate the control of a turbulent, reattaching shear layer at Mach 2.9 is described. In preliminary experiments, schlieren photography and Rayleigh scattering were used to visualize the effects of air injection normal to the plane of the shear layer. Localized blowing was qualitatively found to increase the growth rate of the shear layer, the intensity of the turbulence, and the unsteadiness of the reattachment shock. However, uniformly distributed air injection did not appear to affect the flow strongly. These results suggest that three-dimensional disturbances are more effective for flow control than two-dimensional disturbances, and that there is a strong connection between the incoming turbulence and the shock motion in this flow.

Poggie, J.↗

NASA NTRS1992

Methodology issues concerning the accuracy of kinematic data collection and analysis using the ariel performance analysis system

Kinematics, the study of motion exclusive of the influences of mass and force, is one of the primary methods used for the analysis of human biomechanical systems as well as other types of mechanical systems. The Anthropometry and Biomechanics Laboratory (ABL) in the Crew Interface Analysis section of the Man-Systems Division performs both human body kinematics as well as mechanical system kinematics using the Ariel Performance Analysis System (APAS). The APAS supports both analysis of analog signals (e.g. force plate data collection) as well as digitization and analysis of video data. The current evaluations address several methodology issues concerning the accuracy of the kinematic data collection and analysis used in the ABL. This document describes a series of evaluations performed to gain quantitative data pertaining to position and constant angular velocity movements under several operating conditions. Two-dimensional as well as three-dimensional data collection and analyses were completed in a controlled laboratory environment using typical hardware setups. In addition, an evaluation was performed to evaluate the accuracy impact due to a single axis camera offset. Segment length and positional data exhibited errors within 3 percent when using three-dimensional analysis and yielded errors within 8 percent through two-dimensional analysis (Direct Linear Software). Peak angular velocities displayed errors within 6 percent through three-dimensional analyses and exhibited errors of 12 percent when using two-dimensional analysis (Direct Linear Software). The specific results from this series of evaluations and their impacts on the methodology issues of kinematic data collection and analyses are presented in detail. The accuracy levels observed in these evaluations are also presented.

Wilmington, R. P.↗

NASA NTRS1992

Calculation of area-averaged vertical profiles of the horizontal wind velocity from volume-imaging lidar data

Area-averaged horizontal wind measurements are derived from the motion of spatial inhomogeneities in aerosol backscattering observed with a volume-imaging lidar. Spatial averaging provides high precision, reducing sample variations of wind measurements well below the level of turbulent fluctuations, even under conditions of very light mean winds and strong convection or under the difficult conditions represented by roll convection. Wind velocities are measured using the two-dimensional spatial cross correlation computed between successive horizontal plane maps of aerosol backscattering, assembled from three-dimensional lidar scans. Prior to calculation of the correlation function, three crucial steps are performed: (1) the scans are corrected for image distortion by the wind during a finite scan time; (2) a temporal high pass median filtering is applied to eliminate structures that do not move with the wind; and (3) a histogram equalization is employed to reduce biases to the brightest features.

Schols, J. L.↗

NASA NTRS1992

Numerical analysis of turbine blade tip treatments

Three-dimensional solutions of the Navier-Stokes equations for a turbine blade with a turning angle of 180 degrees have been computed, including blade tip treatments involving cavities. The geometry approximates a preliminary design for the GGOT (Generic Gas Oxidizer Turbine). The data presented here will be compared with experimental data to be obtained from a linear cascade using original GGOT blades. Results have been computed for a blade with 1 percent clearance, based on chord, and three different cavity sizes. All tests were conducted at a Reynolds number of 4 x 10 exp 7. The grid contains 39,440 points with 10 spanwise planes in the tip clearance region of 5.008E-04 m. Streamline plots and velocity vectors together with velocity divergence plots reveal the general flow behavior in the clearance region. Blade tip temperature calculations suggest placement of a cavity close to the upstream side of the blade tip for reduction of overall blade tip temperature. The solutions do not account for the relative motion between the endwall and the turbine blade. The solutions obtained are generally consistent with previous work done in this area,

Gopalaswamy, Nath S.↗

NASA NTRS1994

High Performance Parallel Analysis of Coupled Problems for Aircraft Propulsion

In order to predict the dynamic response of a flexible structure in a fluid flow, the equations of motion of the structure and the fluid must be solved simultaneously. In this paper, we present several partitioned procedures for time-integrating this focus coupled problem and discuss their merits in terms of accuracy, stability, heterogeneous computing, I/O transfers, subcycling, and parallel processing. All theoretical results are derived for a one-dimensional piston model problem with a compressible flow, because the complete three-dimensional aeroelastic problem is difficult to analyze mathematically. However, the insight gained from the analysis of the coupled piston problem and the conclusions drawn from its numerical investigation are confirmed with the numerical simulation of the two-dimensional transient aeroelastic response of a flexible panel in a transonic nonlinear Euler flow regime.

Felippa, C. A.↗

NASA NTRS1994

On the asymptotic similarity of rotating homogeneous turbulence

Asymptotic similarity states at large Reynolds numbers and small Rossby numbers in rotating homogeneous turbulence are investigated using the database obtained from large-eddy simulations of the incompressible Navier-Stokes equations. Previous work has shown that the turbulence kinetic energy and integral length scales are accurately described by simple scaling laws based on the low wavenumbers part of the three-dimensional energy spectrum. The primary interest of the present study is to search for spectrum similarity in the asymptotic state. Four independent energy spectra are defined. It is shown that rescaling of these energy spectra in the asymptotic regime will collapse three out of the four spectra. The spectrum which does not collapse is a function only of the vertical wavenumber and corresponds to two-component motions in the plane normal to the rotation axis. Detailed investigation of the cause of this anomalous behavior reveals the existence of a strong reverse cascade of energy from small-to-large scales of the two-dimensional, two-component motions. This feature of the rotating flow is presumably linked to the lack of a complete similarity state, though further study of this issue is required.

Squires, K. D.↗

NASA NTRS1995

Experimental study of the use of vortex generators to reduce fluctuating pressure loads in shock wave turbulent boundary layer interactions

Fluctuating wall pressure measurements have been made in a separated shock wave/turbulent boundary layer interaction produced by an unswept compression corner in a Mach 5 flow. Wheeler doublet vortex generators were placed 15.8 boundary layer thicknesses upstream of the corner to study their effect on the fluctuating pressure loads produced by the translating separation shock. The vortex generators produced significant three-dimensionality in an otherwise two-dimensional interaction. They reduced the upstream influence and the length of the region of shock motion by 60% and 64%, respectively, decreased the maximum wall pressure rms by 23%, and shifted the fluctuations to a higher frequency band. The maximum fraction of energy in the 100-500 Hz frequency band is decreased by 11%. These changes are due to a fuller boundary layer profile, a weaker separation shock, and increased boundary layer turbulence causing increased separation shock jitter.

Barter, John W.↗

NASA NTRS1996

Toward a Turbulence Constitutive Relation for Rotating Flows

In rapidly rotating turbulent flows the largest scales of the motion are in approximate geostrophic balance. Single-point turbulence closures, in general, cannot attain a geostrophic balance. This article addresses and resolves the possibility of constitutive relation procedures for single-point second order closures for a specific class of rotating or stratified flows. Physical situations in which the geostrophic balance is attained are described. Closely related issues of frame-indifference, horizontal nondivergence, Taylor-Proudman theorem and two-dimensionality are, in the context of both the instantaneous and averaged equations, discussed. It is shown, in the absence of vortex stretching along the axis of rotation, that turbulence is frame-indifferent. A derivation and discussion of a geostrophic constraint which the prognostic equations for second-order statistics must satisfy for turbulence approaching a frame-indifferent limit is given. These flow situations, which include rotating and nonrotating stratified flows, are slowly evolving flows in which the constitutive relation procedures are useful. A nonlinear non-constant coefficient representation for the rapid-pressure strain covariance appearing in the Reynolds stress and heat flux equations consistent with the geostrophic balance is described. The rapid-pressure strain model coefficients are not constants determined by numerical optimization but are functions of the state of the turbulence as parameterized by the Reynolds stresses and the turbulent heat fluxes. The functions are valid for all states of the turbulence attaining their limiting values only when a limit state is achieved. These issues are relevant to strongly vortical flows as well as flows such as the planetary boundary layers, in which there is a transition from a three-dimensional shear driven turbulence to a geostrophic or horizontal turbulence.

Ristorcelli, J. R.↗

NASA NTRS1997

An Accurate and Dynamic Computer Graphics Muscle Model

A computer based musculo-skeletal model was developed at the University in the departments of Mechanical and Biomedical Engineering. This model accurately represents human shoulder kinematics. The result of this model is the graphical display of bones moving through an appropriate range of motion based on inputs of EMGs and external forces. The need existed to incorporate a geometric muscle model in the larger musculo-skeletal model. Previous muscle models did not accurately represent muscle geometries, nor did they account for the kinematics of tendons. This thesis covers the creation of a new muscle model for use in the above musculo-skeletal model. This muscle model was based on anatomical data from the Visible Human Project (VHP) cadaver study. Two-dimensional digital images from the VHP were analyzed and reconstructed to recreate the three-dimensional muscle geometries. The recreated geometries were smoothed, reduced, and sliced to form data files defining the surfaces of each muscle. The muscle modeling function opened these files during run-time and recreated the muscle surface. The modeling function applied constant volume limitations to the muscle and constant geometry limitations to the tendons.

Levine, David Asher↗

NASA NTRS1997

Multidisciplinary Optimization of Tilt Rotor Blades Using Comprehensive Composite Modeling Technique

An optimization procedure is developed for addressing the design of composite tilt rotor blades. A comprehensive technique, based on a higher-order laminate theory, is developed for the analysis of the thick composite load-carrying sections, modeled as box beams, in the blade. The theory, which is based on a refined displacement field, is a three-dimensional model which approximates the elasticity solution so that the beam cross-sectional properties are not reduced to one-dimensional beam parameters. Both inplane and out-of-plane warping are included automatically in the formulation. The model can accurately capture the transverse shear stresses through the thickness of each wall while satisfying stress free boundary conditions on the inner and outer surfaces of the beam. The aerodynamic loads on the blade are calculated using the classical blade element momentum theory. Analytical expressions for the lift and drag are obtained based on the blade planform with corrections for the high lift capability of rotor blades. The aerodynamic analysis is coupled with the structural model to formulate the complete coupled equations of motion for aeroelastic analyses. Finally, a multidisciplinary optimization procedure is developed to improve the aerodynamic, structural and aeroelastic performance of the tilt rotor aircraft. The objective functions include the figure of merit in hover and the high speed cruise propulsive efficiency. Structural, aerodynamic and aeroelastic stability criteria are imposed as constraints on the problem. The Kreisselmeier-Steinhauser function is used to formulate the multiobjective function problem. The search direction is determined by the Broyden-Fletcher-Goldfarb-Shanno algorithm. The optimum results are compared with the baseline values and show significant improvements in the overall performance of the tilt rotor blade.

Chattopadhyay, Aditi↗

NASA NTRS1998

Aeroelastic Calculations Based on Three-Dimensional Euler Analysis

This paper presents representative results from an aeroelastic code (TURBO-AE) based on an Euler/Navier-Stokes unsteady aerodynamic code (TURBO). Unsteady pressure, lift, and moment distributions are presented for a helical fan test configuration which is used to verify the code by comparison to two-dimensional linear potential (flat plate) theory. The results are for pitching and plunging motions over a range of phase angles, Good agreement with linear theory is seen for all phase angles except those near acoustic resonances. The agreement is better for pitching motions than for plunging motions. The reason for this difference is not understood at present. Numerical checks have been performed to ensure that solutions are independent of time step, converged to periodicity, and linearly dependent on amplitude of blade motion. The paper concludes with an evaluation of the current state of development of the TURBO-AE code and presents some plans for further development and validation of the TURBO-AE code.

Bakhle, Milind A.↗