Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THIN FILMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Thickness scaling and ferroelectric switching in wurtzite structure zinc magnesium oxide thin films

This study reports the thickness scaling of sputtered ferroelectric Zn 0.61 Mg 0.39 O (ZMO) thin films down to 43 nm. Encapsulated IrO 2 /ZMO/Ir capacitors exhibited switchable polarizations exceeding 50 μC cm −2 and coercive fields that increased from 3.9 to 4.4 MV cm −1 as the thickness decreased. Switching kinetics are best described by the simultaneous non-linear nucleation and the growth model. Bimodal switching is prevalent at low thicknesses, with the fastest switching times measured to be approximately 400 ns. Device encapsulation made ZMO switching kinetics more abrupt, potentially due to changes in the concentration of atmosphere-induced defects such as hydroxides. These results demonstrate stable ferroelectricity and sub-microsecond switching in sub-50 nm wurtzite ZMO, highlighting its potential as a low-voltage ferroelectric for integrated nonvolatile memory applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Highly stretchable polymer semiconductor thin films with multi-modal energy dissipation and high relative stretchability

Abstract Stretchable polymer semiconductors (PSCs) have seen great advancements alongside the development of soft electronics. But it remains a challenge to simultaneously achieve high charge carrier mobility and stretchability. Herein, we report the finding that stretchable PSC thin films (<100-nm-thick) with high stretchability tend to exhibit multi-modal energy dissipation mechanisms and have a large relative stretchability ( rS ) defined by the ratio of the entropic energy dissipation to the enthalpic energy dissipation under strain. They effectively recovered the original molecular ordering, as well as electrical performance, after strain was released. The highest rS value with a model polymer (P4) exhibited an average charge carrier mobility of 0.2 cm 2 V −1 s −1 under 100% biaxial strain, while PSCs with low rS values showed irreversible morphology changes and rapid degradation of electrical performance under strain. These results suggest rS can be used as a parameter to compare the reliability and reversibility of stretchable PSC thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A multi-technique approach to understanding delithiation damage in LiCoO2 thin films

Abstract We report on the delithiation of LiCoO 2 thin films using oxalic acid (C 2 H 2 O 4 ) with the goal of understanding the structural degradation of an insertion oxide associated with Li chemical extraction. Using a multi-technique approach that includes synchrotron radiation X-ray diffraction, scanning electron microscopy, micro Raman spectroscopy, photoelectron spectroscopy and conductive atomic force microscopy we reveal the balance between selective Li extraction and structural damage. We identify three different delithiation regimes, related to surface processes, bulk delithiation and damage generation. We find that only a fraction of the grains is affected by the delithiation process, which may create local inhomogeneities. However, the bulk delithiation regime is effective to delithiate the LCO film. All experimental evidence collected indicates that the delithiation process in this regime mimics the behavior of LCO upon electrochemical delithiation. We discard the formation of Co oxalate during the chemical extraction process. In conclusion, the chemical route to Li extraction provides additional opportunities to investigate delithiation while avoiding the complications associated with electrolyte breakdown and simplifying in-situ measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Surface reconstructions and electronic structure of metallic delafossite thin films

The growing interest in the growth and study of thin films of low-dimensional metallic delafossites, with the general formula ABO2, is driven by their potential to exhibit electronic and magnetic characteristics that are not accessible in bulk systems. The layered structure of these compounds introduces unique surface states as well as electronic and structural reconstructions, making the investigation of their surface behavior pivotal to understanding their intrinsic electronic structure. In this work, we study the surface phenomena of epitaxially grown PtCoO2, PdCoO2, and PdCrO2 films, utilizing a combination of molecular-beam epitaxy and angle-resolved photoemission spectroscopy. Through precise control of surface termination and treatment, we discover a pronounced 3×3 surface reconstruction in PtCoO2 films and PdCoO2 films, alongside a 2 × 2 surface reconstruction observed in PdCrO2 films. These reconstructions have not been reported in prior studies of delafossites. Furthermore, our computational investigations demonstrate the BO2 surface’s relative stability compared to the A-terminated surface and the significant reduction in surface energy facilitated by the reconstruction of the A-terminated surface. These experimental and theoretical insights illuminate the complex surface dynamics in metallic delafossites, paving the way for future explorations of their distinctive properties in low-dimensional studies.

Materials Science↗
DOE OSTI2022

Manipulating the metal-to-insulator transition and magnetic properties in manganite thin films via epitaxial strain

Strain engineering of epitaxial transition metal oxide heterostructures offers an intriguing opportunity to control electronic structures by modifying the interplay between spin, charge, orbital, and lattice degrees of freedom. Here, we demonstrate that the electronic structure, magnetic and transport properties of La 0.9 Ba 0.1 MnO 3 thin films can be effectively controlled by epitaxial strain. Spectroscopic studies and first-principles calculations reveal that the orbital occupancy in Mn eg orbitals can be switched from the d 3z 2 -r 2 orbital to the d x 2 -y 2 orbital by varying the strain from compressive to tensile. Further, the change of orbital occupancy associated with Mn 3d-O 2p hybridization leads to dramatic modulation of the magnetic and electronic properties of strained La 0.9 Ba 0.1 MnO 3 thin films. Under moderate tensile strain, an emergent ferromagnetic insulating state with an enhanced ferromagnetic Curie temperature of 215 K is achieved. These findings not only deepen our understanding of electronic structures, magnetic and transport properties in the La 0.9 Ba 0.1 MnO 3 system, but also demonstrate the use of epitaxial strain as an effective knob to tune the electronic structures and related physical properties for potential spintronic device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Growth and Characterization of Epitaxial FeWO 4 Thin Films with Controlled Oxygen Stoichiometry

Here, we report the growth of single-phase epitaxial FeWO 4 thin films, using plasma-assisted molecular beam epitaxy, and investigate structural, optical, and electronic properties. The FeWO 4 films grow in (100) orientation on c-plane sapphire (0001) substrates and exhibit 3 rotational twin variants where FeWO 4 [001] is aligned to sapphire [100] equivalent in-plane directions. X-ray diffraction measurements indicate that the epitaxial FeWO 4 (100) structure is optimized when 80-100 W of rf power is applied to an atomic oxygen source during growth, yielding films with minimal strain and impurity phases or other orientations. In films grown with 120 W of rf power, FeWO 4 crystallites develop inhomogeneous and homogeneous strains and are potentially contaminated with Fe 3+ oxide phase impurities. In films grown with 60 W of rf power, FeWO 4 crystallites do not form fully epitaxial layers. X-ray photoelectron spectroscopy indicates that the structural changes are correlated with the Fe 3+ /Fe 2+ oxidation state ratio increasing from 0.6-1.4 with rf power from 60-120 W. X-ray fluorescence spectroscopy indicates that the Fe/W composition ratio is also increasing from 1.1-1.8 with rf power from 60-120 W. Ultraviolet and visible optical absorption spectra indicate a 1.8 ± 0.1 eV band gap with an additional interband absorption feature at 3.1 ± 0.1 eV in the 80-100 W films, with similar onsets observed in the 60 W films. In the 120 W films, the higher lying transition is shifted to 2.7 ± 0.1 eV due to the Fe 3+ enrichment. Electrical resistivity decreases over 2 orders of magnitude with oxidation from 10 4 -10 5 Ω cm in 60 W films to 120 ± 10 Ω cm in 120 W films. Thermopower measurements show p-type to n-type conductivity conversion when oxidation states shift from Fe 2+ majority in the 100 W films to Fe 3+ majority in the 120 W films. We conclude that electron polaron hopping driven by Fe 3+ is a dominant transport mechanism and a source of n-type conductivity in overoxidized FeWO 4 films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of correlated oxide electrodes on disorder pinning and thermal roughening of ferroelectric domain walls in epitaxial PbZr 0.2 Ti 0.8 O 3 thin films

We report the competing effects of disorder pinning and thermal roughening on ferroelectric domain walls as a function of temperature in epitaxial PbZr 0.2 Ti 0.8 O 3 thin films deposited on (001) SrTiO 3 substrates buffered by three types of correlated oxide electrodes, La 0.67 Sr 0.33 MnO 3 , LaNiO 3 , and SrIrO 3 . Piezo-response force microscopy studies show that the 50 nm PbZr 0.2 Ti 0.8 O 3 films are uniformly polarized in the as-grown states, with the patterned domain structures persisting above 700 °C. For all three types of films, the domain wall roughness is dominated by 2D random bond disorder at room temperature, and transitions to 1D thermal roughening upon heating. The roughness exponent ζ increases progressively from 0.3 to 0.5 within a temperature window that depends on the bottom conducting oxide type, from which we extracted the distribution of disorder pinning energy. Lastly, we discuss the possible origins of the disorder pinning and the effect of the correlated oxide electrodes on the energy landscape of DW motion.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Superconductivity in Ruddlesden–Popper nickelates: a review of recent progress, focusing on thin films

The discovery of superconductivity with Tc ∼ 80 K in the nickelate Ruddlesden-Popper bilayer La3Ni2O7 at high pressure has opened a new platform for unconventional superconductivity, followed by the subsequent observation of superconductivity in trilayer La4Ni3O10, also at high pressure. Remarkably, ambient-pressure superconductivity was also observed recently in La3Ni2O7 ultra-thin films when grown on substrates that provide compressive strain. This discovery significantly extends the type of experimental techniques that can be used in nickelates, previously limited due to the high-pressure constraint. Discussing the similarities and differences among these nickel oxides will provide new insights into understanding the mechanism of high-Tc superconductivity in correlated electron systems. In this paper, we review the experimental and theoretical progress on Ruddlesden–Popper nickelates, with emphasis on thin films, and discuss future perspectives and research directions.

Zhang, Yang [ORNL] (ORCID:0000000336235883)↗
DOE OSTI2025

Numerical design considerations for vapor transport deposition of metal-halide perovskite thin films

While metal-halide perovskites (MHPs) offer high efficiency and potential application in single junction and tandem solar cells, challenges remain in translating solution-based methods to commercial-scale production. Vapor transport deposition (VTD) offers advantages such as precise control over film composition and purity, as well as the possibility of achieving high thin film deposition rates for scale-up. In this work, a numerical model is developed to simulate the deposition process, analyzing the impact of parameters including source material temperature, carrier gas and dilution gas flow rates, and chamber pressure to optimize deposition rates and film uniformity. Geometrical parameters, such as throw distance, are also found to significantly affect rate and uniformity. Furthermore, the modeling results presented here offer valuable insight for improving the scalability of VTD for the processing of metal-halide perovskites.

Chemical vapor deposition↗
DOE OSTI2023

Nanoscale visualization of the thermally driven evolution of antiferromagnetic domains in FeTe thin films

Antiferromagnetic order, being a ground state of a number of exotic quantum materials, is of immense interest both from the fundamental physics perspective and for driving potential technological applications. For a complete understanding of antiferromagnetism in materials, nanoscale visualization of antiferromagnetic domains, domain walls, and their robustness to external perturbations is highly desirable. Here, we synthesize antiferromagnetic FeTe thin films using molecular-beam epitaxy. We visualize local antiferromagnetic ordering and domain formation using spin-polarized scanning tunneling microscopy. From the atomically resolved scanning tunneling microscopy topographs, we calculate local structural distortions to find a high correlation with the distribution of the antiferromagnetic order. This is consistent with the monoclinic structure in the antiferromagnetic state. Interestingly, we observe a substantial domain-wall change by small temperature variations, unexpected for the low-temperature changes used compared to the much higher antiferromagnetic ordering temperature of FeTe. This is in contrast to electronic nematic domains in the cousin FeSe multilayer films, where we find no electronic or structural change within the same temperature range. Further, our experiments provide the atomic-scale imaging of perturbation-driven magnetic domain evolution simultaneous with the ensuing structural response of the system. The results reveal surprising thermally driven modulations of antiferromagnetic domains in FeTe thin films well below the Néel temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Strain in Metal Halide Perovskite Thin Films - Interfacial Mechanical Coupling

Hybrid organic−inorganic metal halide perovskites (MHPs) are promising semiconductors for photovoltaics and optoelectronics, but their commercial viability is limited by instability, particularly strain induced by mismatch in coefficients of thermal expansion (CTE) between the perovskite film and substrate. Here, we investigate strain development and relaxation in MHP thin films using in situ bending and Grazing Incidence Wide-Angle X-ray Scattering (GIWAXS). We quantify the film− substrate interfacial mechanical coupling and identify interfacial slippage beyond a critical strain (∼0.4%), with Br-2PACz exhibiting comparatively stronger interfacial mechanical coupling among common interface modifiers. Time-resolved GIWAXS reveals reversible macrostrain during thermal cycling driven by CTE mismatch. Leveraging this behavior, we introduce a prestrain process that induces persistent compressive strain after cooling, with partial relaxation over time. These results provide insight into interfacial mechanical coupling and strain dynamics, offering a framework for strain engineering in perovskite devices.

metals↗
DOE OSTI2025

Phase-field modeling of aging-induced microstructure evolution in pentaerythritol tetranitrate thin films and ramifications for shock initiation

Aging of energetic materials may change performance and affect their safety and reliability, but the relationship between microstructure changes induced by aging and consequent performance changes has not been fully established. This work presents results of phase-field method simulations used to model microstructure evolution of vapor-deposited pentaerythritol tetranitrate (PETN) thin films. Simulated aging is shown to induce grain coarsening and substantial changes of the configuration of porosity in the film: Specifically, we show that porosity tends to concentrate in large pores to a greater degree in aged films, a state that is arrived at by closure or consolidation of small pores. To evaluate the performance of the as-deposited and aged films, we perform two-dimensional hydrocode flyer-film impact simulations that incorporate the phase-field output microstructures directly, permitting us to connect features therein to changes in reactivity, a key metric of energy output for shock initiation. The results demonstrate that declining sensitivity obtained for the simulated aged films can be correlated with the loss of fine-structured pores relatively early in the aging process, while long-term microstructure evolution that gradually alters the shape of large, branching pores is less impactful. Finally, we discuss commonalities and discrepancies between our simulation results and high-throughput initiation experiments on shock initiation of aged PETN thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cost-effective, Thin-film SOFCs for Reliable Power Generation (Final Report)

The project was aimed at developing and demonstrating an advanced solid-oxide fuel cell (SOFC) technology to cost-effectively and reliably generate electricity directly from hydrocarbon fuels (e.g., natural gas and coal-derived syngas) for distributed and central generation applications. The studied technology was built on a planar, porous metal-supported SOFC (MS-SOFC) with a unique thin-film structure having its anode intimately supported on a metal substrate. The porous metal support with graded porosity was fabricated from a low-cost scalable phase-inversion tape casting method. Anode, thin-film electrolyte, and cathode were sequentially deposited on the porous metal substrate using atmospheric plasma spray (APS). In this study, it was shown that the composition of the casting slurry could significantly influence the morphology of the metal support fabricated using the phase-inversion tape-casting method. Increasing the solid loading in the slurry favored the formation and growth of finger-like pores to a point, but the presence of excessive solid loading increased the viscosity of the casting slurry, restraining the growth of finger-like pores. With the increase in the amount of the binder polyethersulfone (PESf) in the slurry, well grown finger-like pores and a thin sponge-like layer were formed. Since the parameters of the APS process have a significant effect on the microstructure of coatings, which in turn affects or determines the SOFC cell performance, a series of metal-supported solid oxide fuel cells with a four-layer cell configuration of 430L/Ni-ScSZ/ScSZ/LSCF have been fabricated by a combination of phase inversion tape casting and APS techniques. Electrochemical testing of the cells fabricated from different deposition APS conditions revealed significant differences in cell performance.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Asymmetric Electrode Work Function Customization via Top Electrode Replacement in Ferroelectric and Field–Induced Ferroelectric Hafnium Zirconium Oxide Thin Films

Non-volatile memory device structures such as ferroelectric random-access memory and ferroelectric tunnel junctions employ switchable spontaneous polarization to hold binary states. These devices can potentially benefit from the imposition of spontaneous internal biases and their resulting effect on the polarization properties of the ferroelectric (or field-induced ferroelectric/ antiferroelectric) layer. While HfO 2 -based thin films are ideal candidates for implementation into these devices due to their scalability and silicon compatibility, the phase purity of these oxides is sensitive to the selection of electrode material, preventing incorporation of asymmetric electrode layers into such structures. Within this work, electrode replacement following post-metallization anneal processing is introduced as a route to achieve ferroelectric and field-induced ferroelectric Hf x Zr 1–x O 2 (HZO) thin films with electrode-independent phase constitutions. The effects of this process and the corresponding internal biases imposed across the HZO layers due to asymmetric work functions are investigated. It is shown that internal biases vary in magnitude in accordance with prediction based on the work functions of the replaced electrode layers and affect remanent polarization magnitudes. Accordingly, electrode replacement presents a processing route that can readily produce HZO films with spontaneous internal biases and electrode- independent phase constitutions, facilitating implementation of these ferroelectrics into the next generation device structures.

36 MATERIALS SCIENCE↗