Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TESLA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Fusion Energy Sciences FY 2017 Joint Research Target (JRT) Summary Milestone Report

In support of the 2017 JRT, the DIII-D, NSTX-U and C-Mod teams performed coordinated research, focused on the subjects of dissipative divertor physics and divertor heat flux footprints. As evident in this report, good progress was made on many fronts toward assembling informed pictures of the plasma physics. The teams chose research topics that would best utilize the unique capabilities of DIII-D, NSTX and C-Mod – access to interesting divertor magnetic configurations and geometries, excellent diagnostic sets and extended parameter regimes. The research took advantage of dedicated experimental investigations on DIII-D and archived data analyses from NSTX and C-Mod – all targeted to address keys questions for tokamak power exhaust handling. DIII-D dedicated significant run time to support the 2017 JRT. This included coordinated experiments to investigate an NSTX-like, high flux expansion divertor configuration to compare its detachment response to that seen in NSTX. DIII-D implemented divertor diagnostic upgrades as well and operated with a ‘small angle slot’ divertor to investigate this ‘closed’ divertor configuration. Follow-on experiments are planned to utilize these tools. Analysis of archived data from NSTX and C-Mod was designed to exploit the wealth of information that had been collected during prior experimental campaigns. These investigations included the influence of high poloidal flux expansion on detachment onset (NSTX), magnetic flux balance dependencies of the power exhaust footprints (NSTX and C-Mod), power exhaust channel widths at poloidal magnetic fields greater than 1 Tesla, in the I-mode confinement regime and in response to divertor nitrogen seeding (C-Mod).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Status of High Order Modes Spectra Measurements in 1.3 GHz Cavities for LCLS-II [Slides]

Production and testing of 1.3 GHz cryomodules for the LCLS-II project is ongoing at Fermilab. Each cryomodule is assembled of eight superconducting TESLA-shape elliptical cavities equipped with two High Order Mode (HOM) coupler ports. Measurement of the HOM spectrum is a part of the cavities incoming quality control inspection and the final cryomodule qualification cold test at the Cryomodule Test Facility (CMTF). In this paper we describe the procedure of HOM spectrum measurement and present the accumulated statistics of HOM frequencies and quality factors relevant to multiply cavity vendors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Radiation Limits for CBETA Halbach Magnets (CBETA machine note #036)

The radiation damage calculation proceeds via several stages to get from energy lost by the beam to the field degradation from radiation damage: • Beam energy lost → Specific radiation dose. This just divides the absorbed energy by the mass it was deposited in to convert from J to Gy=J/kg, or rad=0.01Gy. • Specific radiation dose → Magnetisation loss. This depends on the permanent magnet material grade as well as the magnetisation geometry (the “H” field). Magnetisation loss rates have been studied in the literature and this note will follow the formula. • Magnetisation loss → Field change in beam aperture. For uniform magnetisation loss, this is simply proportional (1% less magnetisation = 1% less field). For nonuniform demagnetisation, nonlinear fields errors are also introduced. As the magnetic material has mu_r ~= 1, in this note the H and M fields will be scaled by mu_0 to put them in units of Tesla, which allows easy comparison with B fields and the residual field Br.

43 PARTICLE ACCELERATORS↗

Development and refinement of an in situ ‘molecular microscope’ utilizing ultrahigh resolution mass spectrometry

The ability to elucidate complex metabolic behavior of living organisms in situ and with cellular resolution is a bioanalytical grand challenge that is yet to be realized. Mass spectrometry imaging (MSI) using laser ablation electrospray ionization mass spectrometry (LAESI) has recently been demonstrated, and holds promise for direct spatially resolved molecular profiling in a variety of living systems of DOE relevance (e.g., plant leaf, stem, and root tissue). The LAESI MSI approach has revealed cell-to-cell heterogeneity of metabolites within living plant tissue, in a multiplexed fashion and without the need for labeling. Cellular resolution by in situ, ambient pressure MSI methods are far from routine, however, and have inadequate spatial resolution for many biological questions of interest. We propose to develop next-generation LAESI approaches, using advanced fiber optics and transmission-based geometries, in efforts to attain dynamic bioanalysis of living systems at better than 20 µm lateral resolution. In parallel with LAESI innovations, attendant increases in sensitivity and dynamic range of the mass spectrometer system will also be necessary for detection of the limited amount of material being ionized. To respond to this need, a new, high magnetic field (21 Tesla) Fourier Transform Ion Cyclotron Resonance (FTICR) MS at the EMSL/PNNL will be coupled with the newly developed LAESI source. This mass spectrometer, currently being assembled, will be one of only two such systems in the world, and the only one in a DOE laboratory or user facility. Fundamentally, all key figures of merits of FTICR MS performance improve with increased magnetic field strength, providing the ability to achieve unparalleled molecular specificity (near unequivocal molecular constituent identification) at the highest possible mass resolving power and sensitivity. The work proposed here will greatly increase the utility of this FTICR MS instrument, providing unique capabilities to support BER-relevant science. The research plan is comprised of three tasks, two of which are directed by the academic leads (University of Missouri and George Washington University), and one of which will be performed in conjunction with the BER user facility at EMSL/PNNL. In task 1, advancements of the LAESI technology will be achieved, with oversight and leadership of Professor Akos Vertes of George Washington University. In task 2, incorporation of this ion source with EMSL’s new 21T FTICR MS system will be undertaken, supplemented by global omics measurements and calibrated against more conventional MSI platforms also available at EMSL (Drs. Pasa-Tolic, Anderton, and Koppenaal team). In the final task, the resultant innovations and advancements will be tested and validated by addressing important BER relevant science questions on model systems of interest under the direction of Professor Gary Stacey of the University of Missouri. This research follows on key recommendations of the recent BER “Research in Sustainable Bioenergy” report that, for example, stressed that “The design of sustainable biofuel systems requires knowledge about key plant-microbe-environment interactions that provide a range of ecosystem services.” This task will focus on validation of the instrumentation developed through this proposal, advertising this capability to the community through demonstration and, finally, discovering new biology relevant to the BER mission. This final objective will make use of Setaria viridis, a model C4 grass species, as well as switchgrass and sorghum, two promising biofuel crops. Specifically, we will demonstrate applicability to plant-microbe rhizosphere interactions focusing on the biological nitrogen fixation by monitoring metabolic changes in real-time with nutrient, growth condition, and other perturbations.

09 BIOMASS FUELS↗

Nantucket Island Energy Storage System Assessment

This report evaluates the economic benefits, distribution system effects, and control system requirements associated with the deployment of a combustion turbine generator and a 6 MW / 8 MWh lithium-ion Tesla battery system deployed on Nantucket Island, MA.

25 ENERGY STORAGE↗

Development of High-Q SRF Structures by Nitrogen Doping for Superconducting Electron Linacs

One of the most exciting recent developments in superconducting RF technology has been the discovery of a nitrogen-doping process which can reliably increase the superconducting quality factor of niobium resonators well above 10 10 at high frequency (>1 GHz). This process is now well demonstrated in particular for TESLA-style 9-cell cavities at 1.3 GHz. Nitrogen doping can significantly increase efficiency of the cavities as well as the cryogenic efficiency accelerators, and allowing significant capital cost reductions. This project will expand the application of nitrogen doping into the low-frequency regime and investigate and quantify effects on the quality factor in low frequency superconducting structures from the nitrogen doping process.

43 PARTICLE ACCELERATORS↗

Plasma Processing to Mitigate Field Emission in LCLS-II 1.3 GHz SRF Cavities

A collaboration between Fermilab, SLAC and ORNL is working to develop plasma processing for 1.3GHz TESLA shaped SRF cavities. Hydrocarbon (C x H y ) contaminations and adsorbates lower the cavity surface work function (Φ) increasing Field Emission (FE). Plasma processing removes C x H y allowing the cavity to operate at higher E acc .

43 PARTICLE ACCELERATORS↗

A Novel Low-Cost Method of Manufacturing Nb3Sn Superconductors with Multiple-Tin-Tube Sources (CRADA FRA-2008-0001 Final Report)

In order to successfully sustain a fusion reaction, peak magnetic fields on the order of 12-13 Tesla will be required. Magnetic fields of this magnitude can only be accomplished by advanced superconductors such as Nb3Sn. However, the economic success of a fusion machine will depend on further improvements in the cost-performance of the Nb3Sn conductor. This project will develop a novel, low-cost, multiple-tin-tube process as a new manufacturing approach for large-scale Nb3Sn-conductor production. The process will be suitable for the efficient production of larger strands (0.83 mm), consistent with ITER (International Thermonuclear Experimental Reactor) specifications. In Phase I, Cu/Nb composites were manufactured and shaped into sub-elements. These sub-elements were tin-coated by electroplating, assembled into a precise-fit restack billet tube, and drawn to 0.83 mm diameter. In Phase II, the process will be scaled-up to full production levels. The improved Nb3Sn conductor should have an immediate benefit for high-field magnet applications. A prototype fusion machine, based on a cost effective Nb3Sn conductor, would have enormous economic and social benefits. In addition, the conductor should be applicable to nuclear magnetic resonance (NMR), which has requirements for use in chemical research, biochemistry, pharmaceutical chemistry, polymer science, petroleum research, agricultural chemistry, and medicine. Leszek Motowidlo, Principal Investigator, will be responsible for the overall coordination of the effort. He and others of SupraMagnetics staff will design and fabricate protoype PIT Nb3Sn conductors for evaluation at Fermilab. Emanuela Barzi will be responsible for the Fermilab subcontract and will coordinate and supervise critical current testing Nb3Sn strands and cable fabrication and evaluation.

43 PARTICLE ACCELERATORS↗

Physical Sciences Vistas Issue 2, 2020

Dedication and collaboration accelerate mission-essential LANSCE isotope production; Rigorous operations result in newly outfitted gloveboxes; Continuous improvements deliver high-value subcrit data; 'Magnet surge’ expands capabilities for higher tesla science.

07 ISOTOPE AND RADIATION SOURCES↗

Domestic Sales Mix of Plug-In Electric Vehicles by Trim Variant and Vehicle Characteristics

As plug-in electric vehicles (PEVs) take up a larger share of the United States vehicle market, their variety increases as well. Since many electric vehicle manufacturers offer multiple PEV trim variants, the distribution of vehicle characteristics such as battery capacity, all-electric range, electricity consumption, and curb weight cannot be determined by sales data alone. Sales data and vehicle registration data were analyzed to quantify and map the trim variant distribution of PEV models from nine automakers. With this information, we quantify national sales-weighted characteristics of fourteen different models over ten years, including battery capacity, fuel economy, and vehicle weight. We find a positive correlation between share of all-wheel drive variants for Tesla vehicles and average annual snowfall, and general uniformity nationwide in other vehicle characteristics. The estimated trim variant distributions will be useful in informing decisions regarding materials recycling and EV impact on the energy grid, and this study found that the total installed battery capacity in PEV in the U.S. was 76 GWh through 2020.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The application of macroscopic flakes for Fe-6.5%Si bulk magnetics with superior magnetic properties

Silicon steel is the most popular crystalline soft magnetic material for motor and transformer applications. The material must be in thin thickness to reduce the eddy current loss. Conventional thin steel sheet manufacturing process starts with cast slab, followed by a series of hot/cold roll process. For transformer, thin sheet is wrapped to form the core; for motor, the sheet is stamped, coated, heat treated, and stacked to form stator/rotor. This process requires the steel to possess sufficient ductility. For Si steel, increasing Si content will improve its electrical and magnetic properties, but it will also lead to embrittlement with 3.5% Si as the limit for the conventional manufacturing processes. Despite poor mechanical properties, high Si steel, especially the one with 6.5% Si, is gaining more attention due to its lower iron loss, higher permeability, and near zero magnetostriction. To address the brittleness problem of the 6.5% Si steel, we developed a novel process, using rapid solidification to prepare thin flakes with high ductility, then using hot press to consolidate the flakes into near net shape bulk sample. The obtained Fe-6.5%Si sample with 0.2 mm thickness exhibits an iron loss of 7.2 W/kg at 400Hz and magnetic flux density of 1 Tesla, and a maximum permeability of 28,400. In addition, various coating materials and processes were investigated as inter-flake insulators for their effect on reducing the eddy current losses for thicker configuration.

Fe-6.5%Si Steel↗

International Linear Collider (ILC): A Technical Progress Report

In 2003, more than 2,700 scientists from around the world signed a published statement Understanding Matter, Energy, Space and Time: the Case for the Linear Collider [1-1]. The statement made clear the undisputed worldwide consensus that the next energy frontier machine after the Large Hadron Collider (LHC) should be an electron-positron linear collider with an initial centre-of-mass energy reach of 500 gigaelectronvolts (GeV), upgradable to 1 teraelectronvolt (TeV). In the same year, the International Committee for Future Accelerators (ICFA) commissioned the International Technology Review Panel (ITRP) to select from the then competing acceleration technologies a single technology that would be the basis for an international design effort towards a truly global project. The following year, 2004, the ITRP recommended to ICFA that the 1.3-gigahertz superconducting radiofrequency (SCRF) technology developed by the TESLA collaboration [1-2] should form the basis for the design of the International Linear Collider (ILC).

43 PARTICLE ACCELERATORS↗

Effect of duration of 120 oC baking on the performance on superconducting radio frequency niobium cavities

Over the last decade much attention was given in increasing the quality factor of superconducting radio frequency (SRF) cavities by impurity doping. Prior to the era of doping, the final cavity processing technique to achieve the high accelerating gradient includes the ?in situ? low temperature baking of SRF cavities at temperature ~ 120 oC for several hours. Here, we present the results of a series of measurements on 1.3 GHz TESLA shape single-cell cavities with successive low temperature baking at 120 oC up to 96 hours. The experimental data were analyzed with available theory of superconductivity to elucidate the effect of the duration of low temperature baking on the superconducting properties of cavity materials as well as the rf performance. In addition, the rf loss related to the trapping of residual magnetic field refereed as flux trapping sensitivity was measured with respect to the duration of 120 oC bake.

Khanal, B. D.↗

Status of the JLab Eta Factory (JEF) experiment

The JLab Eta Factory (JEF) experiment is an approved experiment in Hall D at Jefferson Lab that focuses on decays of ? mesons produced in the reaction ?p?p? with emphasis on the rare ???0?? channel. In addition to providing a rare window into higher-order chiral perturbation theory, this channel can be used to search for evidence of dark matter. A potential extension to the Standard Model posits a dark gauge boson B that couples predominately with quarks and can be observed in the ???B, B??0? channel\footnote{S.~Tulin, Phys.\ Rev.\ D {\bf 89}, no. 11, 114008 (2014).}. The same set of final state particles can also be used to look for a scalar dark matter mediator S in the ???0S, S??? channel\footnote{B.~Batell, A.~Freitas, A.~Ismail and D.~McKeen, arXiv:1812.05103 [hep-ph].}. In order to achieve the requisite resolution to clearly identify these rare channels, this experiment calls for an upgrade to the existing GlueX equipment, which is a fixed target apparatus based on a 2-Tesla solenoid magnet (which enables reconstruction of the momentum of the recoil proton). Neutral particles emerging after the interaction of the photon beam with a liquid hydrogen target are detected in the forward direction in the Forward Calorimeter (FCAL), an array of lead glass blocks. We plan to replace the ?80×80 cm2 region of the FCAL closest to the beam line with an array of 2×2×20 cm3 lead tungstate crystals. The current status of the JEF project will be presented.

Taylor, Simon↗

The Jefferson Lab Eta Factory (JEF) experiment

The Jefferson Lab Eta Factory (JEF) experiment is an upcoming experiment designed to run in Hall D at Jefferson Lab using an upgraded GlueX spectrometer to study various decays of the ? meson. The GlueX spectrometer consists of a ?2 Tesla solenoid magnet housing a liquid hydrogen target and drift chambers used for tracking charged particles and an array of lead glass blocks (the Forward Calorimeter (FCAL)) downstream of the magnet for detecting neutral particles. The decays of the ? meson can be used to measure the light quark mass ratio via the ???+???0 channel and allow access to higher-order terms in Chiral Perturbation Theory via the ???0?? channel. The decays can also be used to constrain new charge-conjugation violating/parity conserving (CVPC) reactions and to search for signatures of dark matter. In particular, the ???0?? channel can be used to search for lepto-phobic dark vector (B) bosons in the reaction ??B? (B??0?) or dark scalar (S) bosons in the reaction ???0S (S???). Studying the rare radiative decay channel ???0?? requires replacing the 4×4×45 cm3 lead glass blocks in the inner region of the FCAL with 2×2×20 cm3 lead tungstate crystals, which will provide twice better position and energy resolution. This talk will describe the JEF physics program and the upgrade to the FCAL.

Taylor, Simon↗

Next Generation Integrated PV Products Cost and Workflow Analysis (Final Report)

Residential photovoltaic (PV) costs have fallen consistently for over a decade (Ardani et al. 2018). DOE has subsequently developed a new residential PV cost target for 2030 of $0.05/kilowatt hour (SETO 2023). Ardani et al. (2018) conclude that integrated roofing and PV (RIPV) products may be key to achieving the residential target for both new construction and retrofit residential PV. In RIPV, the PV product is incorporated into or replaces the roofing material. RIPV systems can use conventional crystalline or thin-film technologies, may be aesthetically attractive alternatives to traditional racked and mounted PV systems, and may increase building property values (Cook et al. 2023). These products also have the potential to provide customer acquisition, labor, and equipment cost savings over traditional, racked and mounted residential rooftop PV and several companies have recently introduced integrated roofing and PV (RIPV) products (Cook et al. 2023). In 2022, Tesla was the market leader, representing 94% of RIPV capacity installed in 2022 through its Solar Roof offering, while GAF Energy and its Timberline Solar product was second capturing 3% (Feldman et al. 2023). In this project, NREL analyzed three research questions: (1) How do current RIPV products compare to racked and mounted PV in terms of costs, install times and processes? (2) How are RIPV products installed and are there opportunities for cost savings? (3) What are the key barriers to expanding market opportunities for integrating solar and roofing products? In this project, we explored residential RIPV cost reduction opportunities by analyzing installation processes. Our study documented residential RIPV installations at two reroofing sites (20.52 kilowatts) and the equivalent of nine new construction sites (71.75 kW) in California through a methodology known as time and motion study. We also conducted 15 interviews with subject-matter experts to identify barriers and solutions to maximize these products' market penetration.

14 SOLAR ENERGY↗

SERAPH: Wavelike Dark Matter Searches with SRF Cavities

Haloscopes consisting of a microwave cavity with a high quality factor (Q) connected to low-noise electronics have been deployed to detect wavelike axions and dark photons. But the dark matter mass is unknown, so haloscopes must be tunable to search through the photon coupling vs. mass parameter space. Therefore, the scan rate for haloscope experiments is a crucial figure of merit and is proportional to the cavity’s quality factor. State-of-the-art experiments like ADMX currently use copper cavities with 𝑄∼80000. However, implementing superconducting cavities with 𝑄∼1010 can increase the instantaneous scan rate by possibly a factor of 105. This presentation will report progress on the SERAPH experiment, a family of superconducting haloscopes being developed by the Superconducting Quantum Materials and Systems (SQMS) Center. In this presentation, I will first discuss the principles behind operating a haloscope whose bandwidth is much narrower than the dark matter halo energy distribution. I will then describe the first SERAPH experiments implementing a 1.3 GHz Niobium cavity with an ultra-high quality factor (Q~1010) that has achieved the best sensitivity and deepest exclusion to wavelike dark photon dark matter by almost an order of magnitude. Next, I will discuss progress on the next phase of SERAPH, which will search dark photon dark matter using a widely-tunable SRF cavity (4-7 GHz). I will finally describe plans for subsequent SERAPH experiments to search for dark photons and axions with tunable SRF cavities tolerant to multi-Tesla magnetic fields and quantum sensors that subvert the Standard Quantum Limit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Design and Prototyping of a Novel Toroid Magnet System for the MOLLER Experiment at Jefferson Lab

The Thomas Jefferson National Accelerator Facility (JLab) has designed a unique spectrometer system to measure the weak interaction between electrons. The experiment ?Measurement of Lepton-Lepton Electroweak Reaction? (MOLLER) requires leveraging the recent 12 GeV electron beam upgrade and will run in JLab for 3 years. Focusing the signal for the MOLLER experiment requires five water-cooled toroidal magnets, each with unique geometry and with 7-fold symmetry. This system of magnets provides the magnetic field required to separate the incident beam electrons scattered from the target electrons (Møller scattering) and protons (elastic e-p scattering) in a liquid hydrogen target. The conceptual design was developed by the MOLLER collaboration and was given to JLab in the form of amp turns and physical location, with additional physics requirements. This paper presents prototyping of the coils and magnet support system and discusses the lessons learned during the process along with the plans for full magnet testing and installation. The JLab Magnet Group along with the MOLLER collaboration developed the specification document that includes keep out zones to design the set of magnets. JLab contracted the design of the first toroid magnet in the magnet (TM0) to Massachusetts Institute of Technology. The other four toroid magnets (TM1 through TM4) have been designed by JLab and are in the process of fabrication and assembly. Prototype coils of TM1-TM4 have been fabricated by Everson-Tesla Incorporated, PA (USA). The manuscript presents the unique challenges of the design, alignment, high current density, operating range, high radiation dose, and vacuum environment.

Kashy, David↗