SEARCH · Engineering Papers

Results for “Strain improvement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Structure-based design of a strain transcending AMA1-RON2L malaria vaccine

Apical membrane antigen 1 (AMA1) is a key malaria vaccine candidate and target of neutralizing antibodies. AMA1 binds to a loop in rhoptry neck protein 2 (RON2L) to form the moving junction during parasite invasion of host cells, and this complex is conserved among apicomplexan parasites. AMA1-RON2L complex immunization achieves higher growth inhibitory activity than AMA1 alone and protects mice against Plasmodium yoelii challenge. Here, three single-component AMA1-RON2L immunogens were designed that retain the structure of the two-component AMA1-RON2L complex: one structure-based design (SBD1) and two insertion fusions. All immunogens elicited high antibody titers with potent growth inhibitory activity, yet these antibodies did not block RON2L binding to AMA1. The SBD1 immunogen induced significantly more potent strain-transcending neutralizing antibody responses against diverse strains of Plasmodium falciparum than AMA1 or AMA1-RON2L complex vaccination. This indicates that SBD1 directs neutralizing antibody responses to strain-transcending epitopes in AMA1 that are independent of RON2L binding. This work underscores the importance of neutralization mechanisms that are distinct from RON2 blockade. The stable single-component SBD1 immunogen elicits potent strain-transcending protection that may drive the development of next-generation vaccines for improved malaria and apicomplexan parasite control.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2022

Adaptive evolution of Methylotuvimicrobium alcaliphilum to grow in the presence of rhamnolipids improves fatty acid and rhamnolipid production from CH4

Abstract Rhamnolipids (RLs) are well-studied biosurfactants naturally produced by pathogenic strains of Pseudomonas aeruginosa. Current methods to produce RLs in native and heterologous hosts have focused on carbohydrates as production substrate; however, methane (CH4) provides an intriguing alternative as a substrate for RL production because it is low cost and may mitigate greenhouse gas emissions. Here, we demonstrate RL production from CH4 by Methylotuvimicrobium alcaliphilum DSM19304. RLs are inhibitory to M. alcaliphilum growth (<0.05 g/l). Adaptive laboratory evolution was performed by growing M. alcaliphilum in increasing concentrations of RLs, producing a strain that grew in the presence of 5 g/l of RLs. Metabolomics and proteomics of the adapted strain grown on CH4 in the absence of RLs revealed metabolic changes, increase in fatty acid production and secretion, alterations in gluconeogenesis, and increased secretion of lactate and osmolyte products compared with the parent strain. Expression of plasmid-borne RL production genes in the parent M. alcaliphilum strain resulted in cessation of growth and cell death. In contrast, the adapted strain transformed with the RL production genes showed no growth inhibition and produced up to 1 μM of RLs, a 600-fold increase compared with the parent strain, solely from CH4. This work has promise for developing technologies to produce fatty acid-derived bioproducts, including biosurfactants, from CH4.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Memory-triggered supernova neutrino detection

Here, we demonstrate that observations of the gravitational memory from core collapse supernovae at future deci-Hz interferometers enable time-triggered searches of supernova neutrinos at Mt-scale detectors. Achieving a sensitivity to characteristic strains of at least $\sim 10^{–25}$ at $f ≃ 0.3$ $\mathrm{Hz}$ —e.g., by improving the noise of DECIGO by one order of magnitude—will allow robust time triggers for supernovae at distances $D \sim 40–300$ $\mathrm{Mpc}$, resulting in a nearly background-free sample of $\sim 3–70$ neutrino events per Mt per decade of operation. This sample would bridge the sensitivity gap between rare galactic supernova bursts and the cosmological diffuse supernova neutrino background, allowing detailed studies of the neutrino emission of supernovae in the local Universe.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

ATLAS: a Snakemake workflow for assembly, annotation, and genomic binning of metagenome sequence data

Background: Metagenomics and metatranscriptomics studies provide valuable insight into the composition and function of microbial populations from diverse environments, however the data processing pipelines that rely on mapping reads to gene catalogs or genome databases for cultured strains yield results that underrepresent the genes and functional potential of uncultured microbes. Recent improvements in sequence assembly methods have eased the reliance on genome databases, thereby allowing the recovery of genomes from uncultured microbes. However, configuring these tools, linking them with advanced binning and annotation tools, and maintaining provenance of the processing continues to be challenging for researchers. Results: Here we present ATLAS, a software package for customizable data processing from raw sequence reads to functional and taxonomic annotations using state-of-the-art tools to assemble, annotate, quantify, and bin metagenome and metatranscriptome data. Genome-centric resolution and abundance estimates are provided for each sample in a dataset. ATLAS is written in Python and the workflow implemented in Snakemake; it operates in a Linux environment, and is compatible with Python 3.5+ and Anaconda 3+ versions. The source code for ATLAS is freely available, distributed under a BSD-3 license. Conclusions: ATLAS provides a user-friendly, modular and customizable Snakemake workflow for metagenome and metatranscriptome data processing; it is easily installable with conda and maintained as open-source on GitHub at https://github.com/metagenome-atlas/atlas.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Identification and Characterization of ten Escherichia coli Strains Encoding Novel Shiga Toxin 2 Subtypes, Stx2n as Well as Stx2j, Stx2m, and Stx2o, in the United States

The sharing of genome sequences in online data repositories allows for large scale analyses of specific genes or gene families. This can result in the detection of novel gene subtypes as well as the development of improved detection methods. Here, we used publicly available WGS data to detect a novel Stx subtype, Stx2n in two clinical E. coli strains isolated in the USA. During this process, additional Stx2 subtypes were detected; six Stx2j, one Stx2m strain, and one Stx2o, were all analyzed for variability from the originally described subtypes. Complete genome sequences were assembled from short- or long-read sequencing and analyzed for serotype, and ST types. The WGS data from Stx2n- and Stx2o-producing STEC strains were further analyzed for virulence genes pro-phage analysis and phage insertion sites. Nucleotide and amino acid maximum parsimony trees showed expected clustering of the previously described subtypes and a clear separation of the novel Stx2n subtype. WGS data were used to design OMNI PCR primers for the detection of all known stx1 (283 bp amplicon), stx2 (400 bp amplicon), intimin encoded by eae (221 bp amplicon), and stx2f (438 bp amplicon) subtypes. These primers were tested in three different laboratories, using standard reference strains. An analysis of the complete genome sequence showed variability in serogroup, virulence genes, and ST type, and Stx2 pro-phages showed variability in size, gene composition, and phage insertion sites. The strains with Stx2j, Stx2m, Stx2n, and Stx2o showed toxicity to Vero cells. Stx2j carrying strain, 2012C-4221, was induced when grown with sub-inhibitory concentrations of ciprofloxacin, and toxicity was detected. Taken together, these data highlight the need to reinforce genomic surveillance to identify the emergence of potential new Stx2 or Stx1 variants. The importance of this surveillance has a paramount impact on public health. Per our description in this study, we suggest that 2017C-4317 be designated as the Stx2n type-strain.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1988

Higher order turbulence closure models

Theoretical models are developed and numerical studies conducted on various types of flows including both elliptic and parabolic. The purpose of this study is to find better higher order closure models for the computations of complex flows. This report summarizes three new achievements: (1) completion of the Reynolds-stress closure by developing a new pressure-strain correlation; (2) development of a parabolic code to compute jets and wakes; and, (3) application to a flow through a 180 deg turnaround duct by adopting a boundary fitted coordinate system. In the above mentioned models near-wall models are developed for pressure-strain correlation and third-moment, and incorporated into the transport equations. This addition improved the results considerably and is recommended for future computations. A new parabolic code to solve shear flows without coordinate tranformations is developed and incorporated in this study. This code uses the structure of the finite volume method to solve the governing equations implicitly. The code was validated with the experimental results available in the literature.

Amano, Ryoichi S.↗

NASA NTRS2006

Developing Multilayer Thin Film Strain Sensors With High Thermal Stability

A multilayer thin film strain sensor for large temperature range use is under development using a reactively-sputtered process. The sensor is capable of being fabricated in fine line widths utilizing the sacrificial-layer lift-off process that is used for micro-fabricated noble-metal sensors. Tantalum nitride films were optimized using reactive sputtering with an unbalanced magnetron source. A first approximation model of multilayer resistance and temperature coefficient of resistance was used to set the film thicknesses in the multilayer film sensor. Two multifunctional sensors were fabricated using multilayered films of tantalum nitride and palladium chromium, and tested for low temperature resistivity, TCR and strain response. The low temperature coefficient of resistance of the films will result in improved stability in thin film sensors for low to high temperature use.

Wrbanek, John D.↗

NASA NTRS2012

Utilizing Photogrammetry and Strain Gage Measurement to Characterize Pressurization of an Inflatable Module

This paper documents the integration of a large hatch penetration into an inflatable module. This paper also documents the comparison of analytical load predictions with measured results utilizing strain measurement. Strain was measured by utilizing photogrammetric measurement and through measurement obtained from strain gages mounted to selected clevises that interface with the structural webbings. Bench testing showed good correlation between strain measurement obtained from an extensometer and photogrammetric measurement especially after the fabric has transitioned through the low load/high strain region of the curve. Test results for the full-scale torus showed mixed results in the lower load and thus lower strain regions. Overall strain, and thus load, measured by strain gages and photogrammetry tracked fairly well with analytical predictions. Methods and areas of improvements are discussed.

Valle, Gerard D.↗

NASA NTRS2026

Influences of Introduced Yttrium Oxide Particles on Superalloy 718

Additive manufacturing has proven useful for introducing oxide particles into superalloys, to provide oxide dispersion strengthening (ODS) at high temperatures. This study screened how such an approach can influence microstructure and failure modes for superalloy 718. The objective of this study was to compare tensile and creep failure modes for additively manufactured superalloy 718 having introduced oxide particles. Fine yttrium-oxide (yttria) particles were introduced into 718 powder using two different powder mixing methods. Additive manufacturing by laser powder bed fusion was then used to prepare specimen blanks for each case, oriented parallel and transverse to the building direction. These were subsequently given consistent stress relief, hot isostatic pressurization, and final heat treatments, then subjected to tensile and creep tests at varied temperatures. Additively manufactured 718 without ODS (“no-ODS”) had nearly equiaxed grains at 50 μm in width. Roll-mixed ODS material had a bimodal grain size distribution, with fine grains at 9 μm and coarse grains at 66 μm in average width. The fine grains were elongated about 5x in the building direction. Acoustic-mixed ODS materials had grains at 10 μm in width that were elongated about 10x in the build direction. Compared to no-ODS, roll-mixed and acoustic mixed ODS materials did not show improved tensile strengths at room temperature, 760 °C, and 1093 °C. The tensile failure strains parallel to the building direction of roll-mixed ODS material were lowest in these tests. Flattened clumps of yttria had formed transverse to the building direction in roll-mixed material, which were easily cracked. Creep rupture response at 760 °C in the building direction was highest for acoustic-mixed material test. Creep tests at 1093 °C showed varied results, with low rupture lives associated with enhanced cavitation at grain boundaries and surface oxidation. Transverse to the building direction, all three materials had low failure strains in tests at 760 °C. The elongated grain boundaries failed readily in all transverse specimens tested at 760 °C and 1093 °C.

oxide dispersion strengthening↗

DOE OSTI2023

Targeted rRNA depletion enables efficient mRNA sequencing in diverse bacterial species and complex co-cultures

Bacterial mRNA sequencing is inefficient due to the abundance of ribosomal RNA that is challenging to deplete. While commercial kits target rRNA from common bacterial species, they are frequently inefficient when applied to divergent species, including those from environmental isolates. Similarly, other methods typically employ large probe sets that tile the entire length of rRNAs; however, such approaches are infeasible when applied to many species. Therefore, we present EMBR-seq+, which requires fewer than 10 oligonucleotides per rRNA by combining rRNA blocking primers with RNase H-mediated depletion to achieve rRNA removal efficiencies of up to 99% in diverse bacterial species. Furthermore, in more complex microbial co-cultures between Fibrobacter succinogenes strain UWB7 and anaerobic fungi, EMBR-seq+ depleted both bacterial and fungal rRNA, with a fourfold improvement in bacterial rRNA depletion compared with a commercial kit, thereby demonstrating that the method can be applied to non-model microbial mixtures. Notably, for microbes with unknown rRNA sequences, EMBR-seq+ enables rapid iterations in probe design without requiring to start experiments from total RNA. Finally, efficient depletion of rRNA enabled systematic quantification of the reprogramming of the bacterial transcriptome when cultured in the presence of the anaerobic fungi Anaeromyces robustus or Caecomyces churrovis. We observed that F. succinogenes strain UWB7 downregulated several lignocellulose-degrading carbohydrate-active enzymes in the presence of anaerobic gut fungi, suggesting close interactions between two cellulolytic species that specialize in different aspects of biomass breakdown. Thus, EMBR-seq+ enables efficient, cost-effective, and rapid quantification of the transcriptome to gain insights into non-model microbial systems.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Creating multifunctional synthetic lichen platforms for sustainable biosynthesis of biofuel precursors

In this project, we were creating a sustainable platform for biofuel production, utilizing carbon-fixing autotrophs to supply oxygen and organic substrates to heterotrophic partners, which in turn produce carbon dioxide to feed the autotrophs. This symbiotic lichen community could lower the input cost, optimize metabolic exchanges and improve the generation of biofuel precursors through multi-omics driven genetic engineering. The cyanobacteria Synechococcus elongatus (S. elongatus) was used as the primary autotroph to provide oxygen and organic substrates, especially sucrose, to a co-culture system. The strain with overexpression of sucrose transporter cscB demonstrated a significant increase in sucrose production under salt stress as what we expected. We also implemented 13C metabolic flux analysis on the sucrose secreting strain S. elongatus cscB-NaCl. Next, transporters proteins like glutamate exporter mscCG from Corynebacterium glutamicum was overexpressed in S. elongatus to improve metabolite exchange.

Betenbaugh, Michael↗

DOE OSTI2024

In-Situ Blade Strain Measurements and Fatigue Analysis of a Cross-Flow Turbine Operating in a Tidal Flow

Cross-flow turbines (CFTs) are inherently unsteady devices with regards to operating principle and loading. By improving our understanding of the dynamic loading on these turbines, we hope to better inform CFT design, improve survivability, and reduce overall costs. The University of New Hampshire (UNH) and the National Renewable Energy Laboratory (NREL) collaborated on a project to instrument and test a four-bladed New Energy Corp. vertical axis cross-flow turbine in a real tidal flow. One blade from the 3.2 m diameter x 1.7 m height turbine was instrumented with eight full-bridge strain gauges along the span of the blade. The turbine was then deployed at the UNH-Atlantic Marine Energy Center (AMEC) Tidal Energy Test Site in Portsmouth, NH. Time-synchronized measurements of blade strain, inflow, thrust, rotational speed, and electrical output were obtained to characterize blade loading under various conditions. The blade strain was examined to assess the dynamic loading and conduct a fatigue analysis on the device.

blade strain↗

DOE OSTI2023

Combinatorial gene inactivation of aldehyde dehydrogenases mitigates aldehyde oxidation catalyzed by E. coli resting cells

Aldehydes are attractive chemical targets both as end products in the flavors and fragrances industry and as synthetic intermediates due to their propensity for C–C bond formation. Here, in this study, we identify and address unexpected oxidation of a model collection of aromatic aldehydes, including many that originate from biomass degradation. When diverse aldehydes are supplemented to E. coli cells grown under aerobic conditions, as expected they are either reduced by the wild-type MG1655 strain or stabilized by a strain engineered for reduced aromatic aldehyde reduction (the E. coli RARE strain). Surprisingly, when these same aldehydes are supplemented to resting cell preparations of either E. coli strain, under many conditions we observe substantial oxidation. By performing combinatorial inactivation of six candidate aldehyde dehydrogenase genes in the E. coli genome using multiplexed automatable genome engineering (MAGE), we demonstrate that this oxidation can be substantially slowed, with greater than 50% retention of 6 out of 8 aldehydes when assayed 4 h after their addition. Given that our newly engineered strain exhibits reduced oxidation and reduction of aromatic aldehydes, we dubbed it the E. coli ROAR strain. We applied the new strain to resting cell biocatalysis for two kinds of reactions – the reduction of 2-furoic acid to furfural and the condensation of 3-hydroxybenzaldehyde and glycine to form a non-standard β-hydroxy-α-amino acid. In each case, we observed substantial improvements in product titer 20 h after reaction initiation (9-fold and 10-fold, respectively). Moving forward, the use of this strain to generate resting cells should allow aldehyde product isolation, further enzymatic conversion, or chemical reactivity under cellular contexts that better accommodate aldehyde toxicity.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Development of genetic tools for the thermophilic filamentous fungus Thermoascus aurantiacus

Abstract Background Fungal enzymes are vital for industrial biotechnology, including the conversion of plant biomass to biofuels and bio-based chemicals. In recent years, there is increasing interest in using enzymes from thermophilic fungi, which often have higher reaction rates and thermal tolerance compared to currently used fungal enzymes. The thermophilic filamentous fungus Thermoascus aurantiacus produces large amounts of highly thermostable plant cell wall-degrading enzymes. However, no genetic tools have yet been developed for this fungus, which prevents strain engineering efforts. The goal of this study was to develop strain engineering tools such as a transformation system, a CRISPR/Cas9 gene editing system and a sexual crossing protocol to improve the enzyme production. Results Here, we report Agrobacterium tumefaciens -mediated transformation (ATMT) of T. aurantiacus using the hph marker gene, conferring resistance to hygromycin B. The newly developed transformation protocol was optimized and used to integrate an expression cassette of the transcriptional xylanase regulator xlnR , which led to up to 500% increased xylanase activity. Furthermore, a CRISPR/Cas9 gene editing system was established in this fungus, and two different gRNAs were tested to delete the pyrG orthologue with 10% and 35% deletion efficiency, respectively. Lastly, a sexual crossing protocol was established using a hygromycin B- and a 5-fluoroorotic acid-resistant parent strain. Crossing and isolation of progeny on selective media were completed in a week. Conclusion The genetic tools developed for T. aurantiacus can now be used individually or in combination to further improve thermostable enzyme production by this fungus.

09 BIOMASS FUELS↗

NASA NTRS1978

Behavior of a turbulent boundary layer subjected to sudden transverse strain

Data from two experiments on the development of the components of the Reynolds stress tensor after a sudden application of transverse strain are compared. Computations were based on four different turbulence models: a first-order mixing length model, a second-order two-equation eddy viscosity model, and two second-order Reynolds stress models. The second-order models do not produce dramatic improvements over the simple mixing length model. The Reynolds stress models still need development to represent the physics of shear-strained turbulence well. Finally, it is demonstrated that the assumption of a scalar eddy viscosity, often used in engineering calculations of three-dimensional boundary layers, is quite reasonable.

Higuchi, H.↗

DOE OSTI2025

Multi-objective surrogate-assisted calibration of CPFEM models using macroscopic response and in situ EBSD measurements of grain reorientation trajectories

Crystal plasticity finite element method (CPFEM) models are widely used to simulate the deformation behaviour of polycrystalline materials, but their calibration is often limited by their high computational cost and the non-convexity of the optimisation landscape. Here, this study develops a multi-objective surrogate-assisted calibration workflow that couples a multi-objective genetic algorithm (MOGA) with an adaptively trained deep neural network (DNN) surrogate model to efficiently identify CPFEM parameters from experimental data. The workflow is demonstrated on three crystal plasticity (CP) formulations of increasing complexity — Voce hardening (VH), two-coefficient latent hardening (LH2), and six-coefficient latent hardening (LH6) — using in situ electron backscatter diffraction (EBSD) measurements of Alloy 617 under uniaxial tensile loading. The CPFEM models are calibrated against the experimentally observed stress–strain response and reorientation trajectories of eight grains, then validated against eight additional trajectories and overall texture evolution. Across the CP formulations, the macroscopic response was reproduced reliably, while differences emerged in the robustness and accuracy of the grain-scale predictions. Including grain reorientation trajectories in the multi-objective calibration improved texture evolution predictions and filtered out physically inconsistent parameter sets that can arise from calibrating against only the stress–strain data. The workflow also demonstrates good transferability of calibrated parameters from a low- to a high-fidelity microstructural model. These results provide practical guidance for integrating in situ microstructural data into CPFEM through efficient, repeatable, and physically meaningful multi-objective calibration.

Crystal plasticity finite element method↗

DOE OSTI2026

High-quality Acinetobacter genomes recovered from combat wounds via metagenomic sequencing resemble cultured isolate genomes

The ability to accurately characterize wound pathogens is critical to informing clinical decisions for wound infections with complex treatment requirements. Acinetobacter baumannii is an impactful nosocomial pathogen in combat wounds and civilian hospital-acquired infections. An informed understanding of the phylogenetics and epidemiology of A. baumannii infections in military and civilian environments could guide approaches that improve antibiotic treatment regimens for both military and civilian patients. Whole-genome data for bacterial strains can be difficult to obtain due to challenges in culturing isolates from preserved military specimens. Metagenomic sequencing and assembly create opportunities for genomic analysis of pathogens directly from clinical specimens. The ability to perform comparative analyses between metagenome-derived genomes and culture-derived genomes would support a range of comparative bacterial genomic studies. Wound tissue biopsy and effluent samples from combat injuries were subjected to metagenomic sequencing and assembly. In total, 42 microbial metagenome-assembled genomes (MAGs) were obtained directly from metagenomic sequence data, 36 of which were designated “high” quality. Thirty of these genomes corresponded to Acinetobacter, with 29 mapping specifically to A. baumannii. Other observed genera included Bordetella, Citrobacter, Escherichia, and Pseudomonas. Single-copy and multi-copy orthologs were identified across Acinetobacter MAGs and publicly available isolate genomes derived from military and civilian sources. Both MAG and military isolate genomes were annotated with antimicrobial resistance data, and MAG genomes were statistically comparable to genomes obtained from isolates. Our results highlight the potential of de novo metagenome assembly for enabling high-resolution characterization directly from clinical specimens, thereby improving diagnostic precision, guiding antimicrobial stewardship, and enhancing understanding of pathogen evolution across diverse healthcare and battlefield environments.

Acinetobacter baumannii↗

DOE OSTI2021

Chemomechanical effect of reduced graphene oxide encapsulation on hydrogen storage performance of Pd nanoparticles

Primary chemomechanical impacts of confinement on hydrogen storage performance are studied using a nanolaminate structure where reduced graphene oxide (rGO) encapsulates palladium (Pd) nanoparticles. Three contributing factors are identified that can alter the reaction enthalpy: nanosizing, chemical interaction with the encapsulant, and mechanical stress induced strain from a combination of clamping force and lateral pulling force exerted on the Pd nanoparticles. The mechanical contributions are quantified by combining transmission electron microscopy, ab initio computation, and continuum elasticity theory, from which the encapsulation is found to exert an additional strain of 4.96% and 2.99% before and after hydrogen absorption, respectively, increasing the Pd and Pd hydride (PdH x ) reaction enthalpy by 1.3–2.8 kJ (mol H 2 ) -1 . The effect of the chemical interaction with rGO also raises the reaction enthalpy by up to 1.6 kJ (mol H 2 ) -1 , while the nanosizing effect decreases the reaction enthalpy. The three contributing factors to the reaction enthalpy are found to be similar in magnitude, where the net effect is in agreement with the measured enthalpy increase of 3.7 kJ (mol H 2 ) -1 from the bulk value. Hydrogen absorption kinetics and capacity also improved, which is attributed to facile nucleation of the hydrogen-rich phase enabled by the inhomogeneous strain distribution over the encapsulated PdHx nanoparticles. These results demonstrate that the chemomechanical effect can be controlled in the nanolaminate structure, providing an ideal template for tuning hydrogen storage performance.

08 HYDROGEN↗