SEARCH · Engineering Papers

Results for “Stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Pulsational stabilities of a star in thermal imbalance - Comparison between the methods

The stability coefficients for quasi-adiabatic pulsations for a model in thermal imbalance are evaluated using the dynamical energy (DE) approach, the total (kinetic plus potential) energy (TE) approach, and the small amplitude (SA) approaches. From a comparison among the methods, it is found that there can exist two distinct stability coefficients under conditions of thermal imbalance as pointed out by Demaret. It is shown that both the TE approaches lead to one stability coefficient, while both the SA approaches lead to another coefficient. The coefficient obtained through the energy approaches is identified as the one which determines the stability of the velocity amplitudes. For a prenova model with a thin hydrogen-burning shell in thermal imbalance, several radial modes are found to be unstable both for radial displacements and for velocity amplitudes. However, a new kind of pulsational instability also appears, viz., while the radial displacements are unstable, the velocity amplitudes may be stabilized through the thermal imbalance terms.

Vemury, S. K.↗

NASA NTRS1979

Boundary lubrication, thermal and oxidative stability of a fluorinated polyether and a perfluoropolyether triazine

Boundary lubricating characteristics, thermal stability, and oxidation-corrosion stability were determined for a fluorinated polyether and a perfluoropolyether triazine. A ball-on-disk apparatus, a tensimeter, and oxidation-corrosion apparatus were used. Results were compared to data for a polyphenyl ether and a C-ether. The polyether and triazine yielded better boundary lubricating characteristics than either the polyphenyl ether or C-ether. The polyphenyl ether had the greatest thermal stability (443 C) while the other fluids had stabilities in the range 389 to 397 C. Oxidation-corrosion results indicated the following order of stabilities: perfluoropolyether trizine greater than polyphenyl ether greater than C-ether greater than fluorinated polyether.

Jones, W. R., Jr.↗

NASA NTRS1980

Turbojet-exhaust-nozzle secondary-airflow pumping as an exit control of an inlet-stability bypass system for a Mach 2.5 axisymmetric mixed-compression inlet

The throat of a Mach 2.5 inlet that was attached to a turbojet engine was fitted with large, porous bleed areas to provide a stability bypass system that would allow a large, stable airflow range. Exhaust-nozzle, secondary-airflow pumping was used as the exit control for the stability bypass airflow. Propulsion system response and stability bypass performance were obtained for several transient airflow disturbances, both internal and external. Internal airflow disturbances included reductions in overboard bypass airflow, power lever angle, and primary-nozzle area, as well as compressor stall. Nozzle secondary pumping as a stability bypass exit control can provide the inlet with a large stability margin with no adverse effects on propulsion system performance.

Sanders, B. W.↗

NASA NTRS1980

Laboratory evaluation of the pointing stability of the ASPS Vernier System

The annular suspension and pointing system (ASPS) is an end-mount experiment pointing system designed for use in the space shuttle. The results of the ASPS Vernier System (AVS) pointing stability tests conducted in a laboratory environment are documented. A simulated zero-G suspension was used to support the test payload in the laboratory. The AVS and the suspension were modelled and incorporated into a simulation of the laboratory test. Error sources were identified and pointing stability sensitivities were determined via simulation. Statistical predictions of laboratory test performance were derived and compared to actual laboratory test results. The predicted mean pointing stability during simulated shuttle disturbances was 1.22 arc seconds; the actual mean laboratory test pointing stability was 1.36 arc seconds. The successful prediction of laboratory test results provides increased confidence in the analytical understanding of the AVS magnetic bearing technology and allows confident prediction of in-flight performance. Computer simulations of ASPS, operating in the shuttle disturbance environment, predict in-flight pointing stability errors less than 0.01 arc seconds.

Source record↗

NASA NTRS1979

Boundary lubrication, thermal and oxidative stability of a fluorinated polyether and a perfluoropolyether triazine

Boundary lubricating characteristics, thermal stability and oxidation-corrosion stability were determined for a fluorinated polyether and a perfluoropolyether triazine. A ball-on-disk apparatus, a tensimeter and oxidation-corrosion apparatus were used. Results were compared to data for a polyphenyl ether and a C-ether. The polyether and triazine yielded better boundary lubricating characteristics than either the polyphenyl ether or C-ether. The polyphenyl ether had the greatest thermal stability (443 C) while the other fluids had stabilities in the range 389 to 397 C. Oxidation-corrosion results indicated the following order of stabilities: perfluoropolyether triazine greater than polyphenylether greater than C-ether greater than fluorinated polyether.

Jones, W. R., Jr.↗

NASA NTRS1979

Aeroelastic stability and response of horizontal axis wind turbine blades

Coupled flap-lag-torsion equations of motion of an isolated horizontal axis wind turbine (HAWT) blade have been formulated. The analysis neglects blade-tower coupling. The final nonlinear equations have periodic coefficients. A new and convenient method of generating an appropriate time-dependent equilibrium position, required for the stability analysis, has been implemented and found to be computationally efficient. Steady-state response and stability boundaries for an existing (typical) HAWT blade are presented. Such stability boundaries have never been published in the literature. The results show that the isolated blade under study is basically stable. The tower shadow (wake) has a considerable effect on the out-of-plane response but leaves blade stability unchanged. Nonlinear terms can significantly affect linearized stability boundaries; however, they have a negligible effect on response, thus implying that a time-dependent equilibrium position (or steady-state response), based completely on the linear system, is appropriate for the type of HAWT blades under study.

Kottapalli, S. B. R.↗

NASA NTRS1980

The shape and stability of rotating liquid drops

Equilibrium shapes and stability of rotating drops held together by surface tension are found by computer-aided analysis that uses expansions in finite-element basis functions. Shapes are calculated as extrema of appropriate energies. Stability and relative stability are determined from curvatures of the energy surface in the neighborhood of the extremum. Families of axisymmetric, two-, three-, and four-lobed drop shapes are traced systematically. Bifurcation and turning points are located and the principle of exchange of stabilities is tested. The axisymmetric shapes are stable at low rotation rates but lose stability at the bifurcation to two-lobed shapes. Two-lobed drops isolated with constant angular momentum are stable. The results bear on experiments designed to further those of Plateau (1863).

Brown, R. A.↗

NASA NTRS1980

Effect of wing location and strakes on stability and control characteristics of a monoplanar circular missile with low-profile tail fins at supersonic speeds

A wind tunnel test was conducted at Mach numbers from 1.70 to 2.86 to extend the aerodynamic data base for wing tail effect on stability and control characteristics of monoplanar missiles. The results are summarized to show the effects of tail fin dihedral angle, wing location, and nose body strakes. The results indicate that an increase in tail fin dihedral angle produces positive increments in directional stability that allow greater trimmed lift coefficient values (maneuver potential) to be obtained. An increase in wing tail gap for the Mach number range reduces the aerodynamic center travel and produces reductions in directional stability at the lower angles of attack. A change in wing height (vertical location) strongly influences the angle of attack at which pitch up and the most directional stability occur. The addition of strakes to the baseline configuration increases directional stability, which allows a significant increase in stable trimmed maneuver capability. The tail fins of the baseline configuration are effective in producing roll and yaw control that are accompanied by favorable yaw and roll, respectively.

Blair, A. B., Jr.↗

NASA NTRS1981

Coherent reference generator phase stability

Approximate phase stability estimates for the coherent reference generator (CRG) unit in the DSN's Frequency and Timing Subsystem (FTS) are calculated. The method used involves estimating the phase noise introduced by CRG components based upon measurements made in the past on similar components in other parts of the FTS and obtaining the CRG phase noise from the component phase noises. Three estimates of phase stability are calculated: the fractional frequency change for a 5 C step in temperature, the phase noise spectral density, and the Allan standard deviation. It is found from these estimates that the CRG phase stability is better than that of the H-maser physics unit + receiver. Thus, the first step in improving FTS phase stability would be to make improvements in the H-maser physics unit + receiver. These results are corroborated by indirect clock stability estimates calculated from Doppler data.

Korwar, V. N.↗

NASA NTRS1980

On the stabilization of three-dimensional boundary layers by suction and cooling

A significant reduction in the drag of transonic aircraft can be achieved by using an active method of boundary-layer control to maintain laminar flow on the aerodynamic surfaces. The stabilizing influence of suction for both favorable and adverse pressure gradients is demonstrated by means of the self-similar incompressible three-dimensional boundary layers on yawed wedges. Profile instability is measured by the maximum amplification rate of fixed-frequency disturbances computed according to linearized, locally parallel, spatial stability theory. Suction is found to be more effective in controlling Tollmien-Schlichting instability than stationary cross-flow disturbances. The effectiveness of surface cooling as a method of stabilization is compared with suction for the boundary layers on a transonic 35 deg swept wing of infinite span. It is found from compressible stability theory that when the surface is cooled to a uniform temperature such that the maximum cross-flow velocity is reduced by the same amount as with a uniform suction distribution, the stabilizing effect of cooling on cross-flow disturbances is less than with suction.

Mack, L. M.↗

NASA NTRS1980

A piloted simulator investigation of static stability and stability/control augmentation effects on helicopter handling qualities for instrument approach

A ground simulator experiment was conducted on the Flight Simulator for Advanced Aircraft at Ames Research Center to investigate the influence of several static stability and stability/control augmentation design parameters on helicopter flying qualities during terminal area operations in instrument conditions. Effects of light turbulence were included. Two levels of static stability in each rotational axis (pitch, roll, yaw) were examined for a hingeless rotor configuration. The variations in pitch and roll were: (1) stable and (2) neutral static stability; in yaw there were two stable levels. Four types of stability/control augmentation were also examined for the lower level of static stability in each axis. This latter investigation covered three helicopter rotor types: hingeless, articulated, and teetering. Four pilots performed a total of 105 evaluations of these parameters for a representative VOR instrument approach task. Pilot rating results indicate the acceptability of neutral static stability longitudinally and laterally and the need for pitch-roll attitude augmentation to achieve a satisfactory system.

Lebacqz, J. V.↗

NASA NTRS1982

A general method to determine the stability of compressible flows

Several problems were studied using two completely different approaches. The initial method was to use the standard linearized perturbation theory by finding the value of the individual small disturbance quantities based on the equations of motion. These were serially eliminated from the equations of motion to derive a single equation that governs the stability of fluid dynamic system. These equations could not be reduced unless the steady state variable depends only on one coordinate. The stability equation based on one dependent variable was found and was examined to determine the stability of a compressible swirling jet. The second method applied a Lagrangian approach to the problem. Since the equations developed were based on different assumptions, the condition of stability was compared only for the Rayleigh problem of a swirling flow, both examples reduce to the Rayleigh criterion. This technique allows including the viscous shear terms which is not possible in the first method. The same problem was then examined to see what effect shear has on stability.

Guenther, R. A.↗

NASA NTRS1982

Simultaneous stabilization and simultaneous pole placement by nonswitching dynamic compensation

The 'simultaneous stabilization problem' is defined and theorems are proposed for its solution. The problem consists in answering the question: given an r-tuple G sub 1(s), G sub r(s) of p x m proper transfer functions, does there exist a compensator K(s) such that the closed loop systems G sub 1(s) (I+K(s)G sub 1(s)) (-1), G sub r(s) (I+K(s) G sub r(s)) (-1) are (internally) stable. This question arises in reliability theory, where G sub 2(s), G sub r(s) represents a plant G sub 1(s) operating in various modes of failure and K(s) is a nonswitching stabilizing compensator. It is important in the stability analysis and design of a plant which can be switched into various operating modes. The simultaneous stabilization problem can also apply to the stabilization of a nonlinear system which is linearized at several equilibria. Conditions are defined for pole placement and the generalized Sylvestor matrix is discussed.

Ghosh, B. K.↗

NASA NTRS1982

The effects on the MHD stability of field line tying to the end faces of a cylindrical magnetic loop

The ideal MHD energy equation is used to derive a stability equation for a specific class of perturbations, in an examination of magnetic loop MHD stability which takes field line tying at its root points into account. It is found that the field line tying effect is negligible to the m=1 kink mode, but important to the localized modes, in the case of a loop of aspect ratio greater than 10. The stability criterion for high-m value localized modes is derived, and compared with the Suydam criterion, to show that there are two field line tying effects for the perturbation of the class studied: (1) a field line bending effect, which is always stabilizing, and (2) a shear effect which is stabilizing or destabilizing depending on the sign of the gradient of the potential magnetic field. The net effect of field line tying is determined by the sum of these two effects.

An, C. Y.↗

NASA NTRS1983

Radioactive nuclear waste stabilization - Aspects of solid-state molecular engineering and applied geochemistry

Stabilization techniques for the storage of radioactive wastes are surveyed, with emphasis on immobilization in a primary barrier of synthetic rock. The composition, half-life, and thermal-emission characteristics of the wastes are shown to require thermally stable immobilization enduring at least 100,000 years. Glass materials are determined to be incapable of withstanding the expected conditions, average temperatures of 100-500 C for the first 100 years. The geological-time stability of crystalline materials, ceramics or synthetic rocks, is examined in detail by comparing their components with similar naturally occurring minerals, especially those containing the same radioactive elements. The high-temperature environment over the first 100 years is seen as stabilizing, since it can recrystallize radiation-induced metamicts. The synthetic-rock stabilization technique is found to be essentially feasible, and improvements are suggested, including the substitution of nepheline with freudenbergite and priderite for alkaline-waste stabilization, the maintenance of low oxygen fugacity, and the dilution of the synthetic-rock pellets into an inert medium.

Haggerty, S. E.↗

NASA NTRS1983

Simultaneous stabilization and simultaneous pole-placement by nonswitching dynamic compensation

Ghosh, B. K.↗

NASA NTRS1984

Transonic calculation of airfoil stability and response with active controls

Transonic aeroelastic stability and response analyses are performed for the MBB A-3 supercritical airfoil. Three degrees of freedom are considered: plunge, pitch, and aileron pitch. The control of airfoil stability and response in transonic flow are studied. Stability analyses are performed using a Pade aeroelastic model based on the use of LTRAN2-NLR transonic small disturbance finite difference computer code. Response analyses are performed by coupling the structural equations of motion to the unsteady aerodynamic forces of LTRAN2-NLR. The focus is on transonic time marching transient response solutions using modal identification to determine stability. Frequency and damping of these modes are directly compared in the complex s-plane with Pade model eigenvalues. Transonic stability and response characteristics of 2-D airfoils are discussed and comparisons are made. Application of the Pade aeroelastic model and time marching analyses to flutter suppression using active controls is demonstrated.

Batina, J. T.↗

NASA NTRS1983

Stability and capture of asteroids

The problem of stability of asteroids is treated from the point of view of Hill's stability-concept and using Lyapunov's Characteristic Numbers. The quantitative measure of stability (S) introduced earlier is evaluated for over 300 asteroids and a surprisingly simple relation is established between the semi-major axes of some of the asteroids' orbits and S. A detailed analysis is presented of the Lyapunov Characteristic Numbers for two minor planets and the time-variation of these numbers is discussed. The technology of capture of asteroids is vitally dependent on their orbital stability, therefore, these two problems, i.e., capture and stability, are closely related. In fact, some predictable instabilities may be properly utilized to capture and/or change asteroidal orbits to accomplish collisions with the Earth.

Szebehely, V.↗