Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Single crystal model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Ab Initio Modeling of fcc Fe-Co-Cr-Ni High Entropy Alloys with Full Composition Range

The Fe-Co-Cr-Ni quaternary system has been studied extensively in the past decade, not only because of the superior properties achieved like high tensile ductility and fracture toughness, but also it is the foundation for the development of FeCrCoNi-based HEAs. However, most of the investigations are mainly focusing on the equiatomic and semi-equiatomic compositions. The physical properties of non-equiatomic compositions are barely explored. In the current work, the ab initio approach is adopted to predict the lattice parameter, structure stabilities, elastic properties, and enthalpy of formations of fcc Fe-Cr-Co-Ni HEA single crystals with the special quasirandom structure (SQS) method. To expand the design of Fe-Co-Cr-Ni HEAs into a full composition range, the current simulations cover all the binaries, ternaries, and the whole quaternary system. The 2-D composition-property contour diagrams are created to show the physical properties in the ternary and quaternary systems. Furthermore, our investigation shows that the fcc alloys' lattice parameter increases with the addition of Fe and Cr and decreases with Ni and Co. In addition to the enthalpy of formation at o K, the shape distortion rate is proposed to be another essential parameter to evaluate crystal stability. The results show the addition of Cr would destabilize the fcc lattice and cause symmetry breaking. Finally, the result of Pugh’s ratio shows that most of the fcc alloys show ductile behavior (P > 1.75), especially for the alloys around Fe 3 Ni, FeCo, and Fe 2 NiCo (P > 2.5). The brittle behavior (P < 1.75) is located around Fe 3 Cr and Fe 2 CoCr. Meanwhile, Cr 2 NiCo and Cr 2 FeNiCo are considered promising compositions to be tried and verified experimentally because of the higher bulk modulus and moderate shear modulus.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Frustrated magnetic cycloidal structure and emergent Potts nematicity in CaMn 2 P 2

We report neutron-diffraction results on single-crystal CaMn 2 P 2 containing corrugated Mn honeycomb layers, and we determine its ground-state magnetic structure. The diffraction patterns consist of prominent (1/6,1/6, L ) reciprocal-lattice unit (r.l.u.; L = integer) magnetic Bragg reflections, whose temperature-dependent intensities are consistent with a first-order antiferromagnetic phase transition at the Néel temperature T N = 70 (1) K. Our analysis of the diffraction patterns reveals an in-plane 6 × 6 magnetic unit cell with ordered spins that in the principal-axis directions rotate by 60°steps between nearest neighbors on each sublattice that forms the honeycomb structure, consistent with the P A c magnetic space group. We find that a few other magnetic subgroup symmetries (P A 2 /c, P C 2/m, P S 1, P C 2, P C m, P S 1) of the paramagnetic $P\bar{3}m11'$ crystal symmetry are consistent with the observed diffraction pattern. We relate our findings to frustrated J 1 -J 2 -J 3 Heisenberg honeycomb antiferromagnets with single-ion anisotropy and the emergence of Potts nematicity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Enhanced low-energy magnetic excitations evidencing the Cu-induced localization in the Fe-based superconductor Fe 0.98 Te 0.5 Se 0.5

Here, we have performed inelastic neutron scattering measurements on optimally doped Fe 0.98 Te 0.5 Se 0.5 and 10% Cu-doped Fe 0.88 Cu 0.1 Te 0.5 Se 0.5 to investigate the substitution effects on the spin excitations in the whole energy range up to 300 meV. It is found that substitution of Cu for Fe enhances the low-energy spin excitations (≤100 meV), especially around the (0.5, 0.5) point, and leaves the high-energy magnetic excitations intact. In contrast to the expectation that Cu with spin 1/2 will dilute the magnetic moments contributed by Fe with a larger spin, we find that the 10% Cu doping enlarges the effective fluctuating moment from 2.85 to 3.13 μB/Fe, although there is no long- or short-range magnetic order around (0.5, 0.5) and (0.5, 0). The presence of enhanced magnetic excitations in the 10% Cu doped sample which is in the insulating state indicates that the magnetic excitations must have some contributions from the local moments, reflecting the dual nature of the magnetism in iron-based superconductors. We attribute the substitution effects to the localization of the itinerant electrons induced by Cu dopants. Furthermore, these results indicate that the Cu doping does not act as electron donor as in a rigid-band shift model, but more as scattering centers that localize the system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Single-crystalline epitaxial TiO film: A metal and superconductor, similar to Ti metal

Titanium monoxide (TiO), an important member of the rock salt 3d transition-metal monoxides, has not been studied in the stoichiometric single-crystal form. It has been challenging to prepare stoichiometric TiO due to the highly reactive Ti 2+ . We adapt a closely lattice-matched MgO(001) substrate and report the successful growth of single-crystalline TiO(001) film using molecular beam epitaxy. This enables a first-time study of stoichiometric TiO thin films, showing that TiO is metal but in proximity to Mott insulating state. We observe a transition to the superconducting phase below 0.5 K close to that of Ti metal. Density functional theory (DFT) and a DFT-based tight-binding model demonstrate the extreme importance of direct Ti–Ti bonding in TiO, suggesting that similar superconductivity exists in TiO and Ti metal. Our work introduces the new concept that TiO behaves more similar to its metal counterpart, distinguishing it from other 3d transition-metal monoxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

On the Ordering Mechanism of Cu + in 2D van der Waals Multiferroic CuCrP 2 S 6

CuCrP 2 S 6 is a van der Waals multiferroic where the tunable Cu + sublattice underpins its exceptional ferroelectric and electronic switching properties. Yet, the microscopic mechanism governing Cu + ordering has remained elusive. Here, we combine single-crystal X-ray and neutron diffraction with pair distribution function analysis to uncover a temperature-driven evolution of Cu + ordering, giving rise to an incommensurate quasi-antipolar phase between the paraelectric and antiferroelectric states. The modulation originates from correlated Cu + occupancy redistribution coupled to breathing distortion of surrounding S 3 triangles, establishing a symmetry-adapted lattice distortion mode. Diffuse scattering persisting over 35 K above the transition confirms that the structural instability follows an order-disorder mechanism. The spontaneous off-centering of Cu + positions CuCrP 2 S 6 as a model platform for correlated order-disorder phenomena in 2D layered ferroics, and provides design principles for next-generation memory and logic devices.

ferroelectrics↗
DOE OSTI2022

Observation of Anomalously High Seebeck Coefficients in the Family of Zintl Phase Semiconductors Ca 10 RE CdSb 9 ( RE = Rare-Earth Metal)

This work reports the synthesis, structure and thermoelectric transport properties of the hole-dominated semiconductors with a general formula Ca 10 RECdSb 9 (RE = Y, Ce, Nd, Sm, and Lu). These materials feature unexpectedly high Seebeck coeffi-cients, up to 650 µV/K at 600 K, and electrical resistivities on the order of 1–1000 mΩ·cm, which is an indication of a degen-erate semiconducting state. For example, the Seebeck coeffi-cient observed in Ca 10 NdCdSb 9 (309 µV/K at 600 K) is accom-panied by low and metallic-like electrical resistivity (6 mΩ·cm) and a carrier concentration n = 4.68×10 20 cm –3 . The calculated power factor PF in Ca 10 NdCdSb 9 is 0.88 µW/cm·K 2 at 300 K, and calculations based on the single parabolic band model indi-cate that an optimum PF opt of 1.68 μW/cm·K 2 can be achieved at that temperature for a carrier concentration n opt = 6.62 × 10 19 cm –3 . Here, the estimated thermoelectric figure of merit zT in this material, when properly tuned is expected to surpass zT = 1 at 600 K.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structure of ice VII with Hirshfeld atom refinement

In the refinement of the crystal structures of ice, the best results obtained so far have been with neutron diffraction because the most troublemaking aspects are the hydrogen atoms. In nine out of twenty ice structures, the hydrogen atoms are disordered, which makes proper refinement more difficult. In our previous paper describing the structure of ice VI we proved that, using Hirshfeld atom refinement (HAR) based on synchrotron X-ray data, it is possible to obtain results comparable with those from neutron experiments. In this work, we investigate another structure of high-pressure disordered ice, cubo-ice (ice VII). Single crystals of cubo-ice were grown under pressure in diamond anvil cells. X-ray diffraction measurements were conducted at a synchrotron source facility (APS, University of Chicago, USA) as well as on our regular in-house laboratory diffractometer with Ag radiation. The data collected were further refined with HAR. Comparison of the structural parameters obtained with those derived from neutron diffraction showed very good agreement in terms of bond lengths and fairly good agreement in terms of hydrogen atom ADPs. We were also able to perform unconstrained refinements with various split-atom models.

Chemistry↗
DOE OSTI2022

Direct Observation of Solvent–Reaction Intermediate Interactions in Heterogeneously Catalyzed Alcohol Coupling

The relative stability of reactive intermediates and reactants on a surface, which dictates the rate and selectivity of catalytic reactions in both gas and liquid phases, is dependent on numerous factors. One well-established example is secondary interactions, such as van der Waals interactions between the catalyst surface and the pendant group of the intermediate, which can govern reaction selectivity for coupling reactions. In this work, we directly show that interactions between adsorbed reaction intermediates and reactant molecules increase the binding energy and affects the geometrical arrangement of coadsorbed reactant/solvent molecules. Evidence for this effect is demonstrated for the oxidative coupling reaction of methanol on a single crystal gold (Au(110)) surface. The rate-limiting reaction intermediate for methanol selfcoupling, methoxy, stabilizes excess adsorbed methanol, which desorbs as a result of beta-hydride decomposition of the adsorbed methoxy. Direct molecular-scale imaging by scanning tunneling microscopy, supplemented by density functional theory, revealed interactive structures formed by methoxy and coadsorbed methanol. Interactions between the methoxy intermediate and coadsorbed methanol stabilizes a hydrogen-bonded network comprising methoxy and methanol by a minimum of 0.13 eV per methanol molecule. Inclusion of such interactions between reaction intermediates and coadsorbed reactants and solvents in kinetic models is important for microkinetic analysis of the rates and selectivities of catalytic reactions in both the gas and liquid phases whenever appreciable coverages of species from the ambient phase exist.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structural, electronic, and magnetic properties of nearly ideal J eff = 1/2 iridium halides

Heavy transition metal magnets with J e f f = 1 2 electronic ground states have attracted recent interest due to their penchant for hosting new classes of quantum spin liquids and superconductors. Unfortunately, model systems with ideal J e f f = 1 2 states are scarce due to the importance of noncubic local distortions in most candidate materials. In this work, we identify a family of iridium halide systems [i.e., K 2 Ir Cl 6 , K 2 Ir Br 6 , ( NH 4 ) 2 Ir Cl 6 , and Na 2 Ir Cl 6 · 6 ( H 2 O ) ] with Ir 4 + electronic ground states exhibiting extremely small deviations from the ideal J e f f = 1 2 limit. We also find ordered magnetic ground states for the three anhydrous systems, with single-crystal neutron diffraction on K 2 Ir Br 6 revealing type-I antiferromagnetism. This spin configuration is consistent with expectations for significant Kitaev exchange in a face-centered-cubic magnet. This work establishes that incorporating isolated Ir X 6 octahedra in materials, where X is a halogen ion with a low electronegativity, is an effective design principle for realizing unprecedented proximity to the pure J e f f = 1 2 state. However, at the same time, we highlight undeniable deviations from this ideal state, even in clean materials with ideal Ir X 6 octahedra as inferred from the global cubic crystal structures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Spin-valley locking and bulk quantum Hall effect in a noncentrosymmetric Dirac semimetal BaMnSb 2

Spin-valley locking in monolayer transition metal dichalcogenides has attracted enormous interest, since it offers potential for valleytronic and optoelectronic applications. Such an exotic electronic state has sparsely been seen in bulk materials. Here, we report spin-valley locking in a Dirac semimetal BaMnSb 2 . This is revealed by comprehensive studies using first principles calculations, tight-binding and effective model analyses, angle-resolved photoemission spectroscopy measurements. Moreover, this material also exhibits a stacked quantum Hall effect (QHE). The spin-valley degeneracy extracted from the QHE is close to 2. This result, together with the Landau level spin splitting, further confirms the spin-valley locking picture. In the extreme quantum limit, we also observed a plateau in the z-axis resistance, suggestive of a two-dimensional chiral surface state present in the quantum Hall state. These findings establish BaMnSb 2 as a rare platform for exploring coupled spin and valley physics in bulk single crystals and accessing 3D interacting topological states.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Magnetic and superconducting anisotropy in Ni-doped RbEuFe 4 As 4 single crystals

We investigate the effect of Ni doping on the Fe site in single crystals of the magnetic superconductor RbEuFe 4 As 4 for doping concentrations of up to 4%. A clear suppression in the superconducting transition temperature is observed in specific-heat, resistivity, and magnetization measurements. Upon Ni doping, the resistivity curves shift up in a parallel fashion, indicating a strong increase of the residual resistivity due to scattering by charged dopant atoms while the shape of the curve and thus the electronic structure appear largely unchanged. The observed step Delta C/T c at the superconducting transition decreases strongly for increasing Ni doping in agreement with expectations based on a model of multiband superconductivity and strong interband pairing. The upper critical field slopes are reduced upon Ni doping for in-plane as well as out-of-plane fields, leading to a small reduction in the superconducting anisotropy. The specific-heat measurements of the magnetic transition reveal the same Berezinskii-Kosterlitz-Thouless behavior close to the transition temperature T m for all doping levels. The transition temperature is essentially unchanged upon doping. The in-plane to out-of-plane anisotropy of Eu magnetism observed at small magnetic fields is unaltered as compared to the undoped compound. In conclusion, all of these observations indicate a decoupling of the Eu magnetism from superconductivity and essentially no influence of Ni doping on the Eu magnetism in this compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Quenching of the octupole rotational band in 71 Ge

The main goal of this study was to enhance the knowledge of the properties of the known octupole rotational band in 71 Ge, including transition rates, and to investigate whether the band persists to higher spin. An experiment at Florida State University using the 62 Ni ( 14 C, 𝛼⁢𝑛) reaction at 50 MeV was used to produce 71 Ge at high spin. An array of ten Compton-suppressed Ge detectors, consisting of three Clover detectors and seven single-crystal detectors, was used to measure the 𝛾 decays in coincidence. An analysis of the resulting coincidence spectra resulted in the placement of 13 additional transitions in the 71 Ge level scheme, one of which (1092 keV) extends the octupole band to a (35/2 − ) state at 8206 keV. However, calculations of the kinematic moment of inertia show that the 1092-keV transition disrupts the rigid rotational pattern and is likely associated with a band crossing, potentially quenching the octupole deformation. Transition strengths inferred from lifetime measurements in the octupole band are not well reproduced by either shell-model calculations using the JUN45 interaction or a semimicroscopic cluster model, while those for the 𝜈⁢𝑔 9/2 band are in good agreement with the corresponding shell-model predictions. Comparisons between the octupole band in 71 Ge and negative-parity bands based on 3 − octupole states in some neighboring even-even nuclei show both similarities and differences. Systematic trends within the 𝜈⁢𝑔 9/2 bands among odd-𝐴 Ge isotopes point to increased collectivity near 𝑁 = 40.

59 ≤ A ≤ 89↗
DOE OSTI2020

Precise measurement of $2νββ$ decay of $^{100}$Mo with the CUPID-Mo detection technology

We report the measurement of the two-neutrino double-beta ($2\nu\beta\beta$) decay of $^{100}$Mo to the ground state of $^{100}$Ru using lithium molybdate (\crystal) scintillating bolometers. The detectors were developed for the CUPID-Mo program and operated at the EDELWEISS-III low background facility in the Modane underground laboratory. From a total exposure of $42.235$ kg$\times$d, the half-life of $^{100}$Mo is determined to be $T_{1/2}^{2\nu}=[7.12^{+0.18}_{-0.14}\,\mathrm{(stat.)}\pm0.10\,\mathrm{(syst.)}]\times10^{18}$ years. This is the most accurate determination of the $2\nu\beta\beta$ half-life of $^{100}$Mo to date. We also confirm, with the statistical significance of $>3\sigma$, that the single-state dominance model of the $2\nu\beta\beta$ decay of $^{100}$Mo is favored over the high-state dominance model.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

New experimental approach to understanding the chemical reactivity of oxide surfaces

Metal oxides have been an attractive option for a range of applications, including hydrogen sensors, microelectronics, and catalysis, due to their reactivity and tunability. The properties of metal oxides can vary greatly on their precise surface structure; however, few surface science techniques can achieve atomistic-level determinations of surface structure, and fewer yet can do so for insulator surfaces. Low energy ion beam analysis offers a potential insulator-compatible solution to characterizing the surface structure of metal oxides. As a feasibility study, we apply low energy ion beam analysis to investigate the surface structure of a magnetite single crystal, Fe 3 O 4 (100). We obtain multi-angle maps using both forward-scattering low energy ion scattering (LEIS) and backscattering impact-collision ion scattering spectroscopy (ICISS). Both sets of experimental maps have intensity patterns that reflect the symmetries of the Fe 3 O 4 (100) surface structure. However, analytical interpretation of these intensity patterns to extract details of the surface structure is significantly more complex than previous LEIS and ICISS structural studies of one-component metal crystals, which had far more symmetries to exploit. To gain further insight into the surface structure, we model our experimental measurements with ion-trajectory tracing simulations using molecular dynamics. Our simulations provide a qualitative indication that our experimental measurements agree better with a subsurface cation vacancy model than a distorted bulk model.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Implementation of a self-consistent slab model of bilayer structure in the SasView suite

Slab models are simple and useful structural descriptions which have long been used to describe lyotropic lamellar phases, such as lipid bilayers. Typically, slab models assume a midline symmetry and break a bilayer structure into three pieces, a central solvent-free core and two symmetric outer layers composed of the soluble portion of the amphiphile and associated solvent. This breakdown matches reasonably well to the distribution of neutron scattering length density and therefore is a convenient and common approach for the treatment of small-angle scattering data. Here, an implementation of this model within the SasView software suite is reported. The implementation is intended to provide physical consistency through the area per amphiphile molecule and number of solvent molecules included within the solvent-exposed outer layer. The proper use of this model requires knowledge of (or good estimates for) the amphiphile and solvent molecule volume and atomic composition, ultimately providing a self-consistent data treatment with only two free parameters: the lateral area per amphiphile molecule and the number of solvent molecules included in the outer region per amphiphile molecule. Here, the use of this code is demonstrated in the fitting of standard lipid bilayer data sets, obtaining structural parameters consistent with prior literature and illustrating the typical and ideal cases of fitting for neutron scattering data obtained using single or multiple contrast conditions. While demonstrated here for lipid bilayers, this model is intended for general application to block copolymers, surfactants, and other lyotropic lamellar phase structures for which a slab model is able to reasonably estimate the neutron scattering length density/electron-density profile of inner and outer layers of the lamellae.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Competition of magnetocrystalline anisotropy of uranium layers and zigzag chains in UNi 0.34 Ge 2 single crystals

Structural and thermodynamic properties of single-crystalline UNi 1-x Ge 2 with x = 0.66 have been investigated by measuring magnetization, specific heat, and thermal expansion over a wide range of temperatures and magnetic fields. The measurements revealed the emergence of a long-range antiferromagnetic ordering of uranium magnetic moments below the Néel temperature T N = 45.5 (1) K and the existence of two easy axes in the studied compound, namely b and c, which correspond to the planes of the uranium zig-zag chains. A magnetic field applied along these two crystallographic directions induces in the system a first-order metamagnetic phase transition (from antiferromagnetic to field-polarized paramagnetism), and the width of the magnetic hysteresis associated with that transition reaches as much as 40 kOe at the lowest temperatures. A magnetic phase diagram developed from the experimental data showed that the metastable region associated with that magnetic hysteresis forms a funnel that narrows toward the N´eel point in a zero magnetic field. The four-layer Ising model has successfully predicted the colinear antiferromagnetic structure in UNi 0.34 Ge 2 (known from earlier reports), its magnetic phase diagram, and temperature and field variations of its magnetization. Moreover, it suggests that the first-order phase transition extends down to zero magnetic field, although it is barely detectable in the experiments performed in low magnetic fields. According to this model, the second-order phase transition occurs in the compound only in zero field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Structure and Reactivity of a High-Spin, Nonheme Iron(III)- Superoxo Complex Supported by Phosphinimide Ligands

Nonheme iron oxygenases utilize dioxygen to accomplish challenging chemical oxidations. Additionally, a further understanding of the Fe-O 2 intermediates implicated in these processes is challenged by their highly transient nature. To that end, we have developed a ligand platform featuring phosphinimide donors intended to stabilize oxidized, high-spin iron complexes. O 2 exposure of single crystals of a three-coordinate Fe(II) complex of this framework allowed for in crystallo trapping of a terminally bound Fe-O 2 complex suitable for XRD characterization. Spectroscopic and computational studies of this species support a high-spin Fe(III) center antiferromagnetically coupled to a superoxide ligand, similar to that proposed for numerous nonheme iron oxygenases. In addition to the apparent stability of this synthetic Fe-O 2 complex, its ability to engage in a range of stoichiometric and catalytic oxidation processes demonstrates that this iron-phosphinimide system is primed for development in modeling oxidizing bioinorganic intermediates and green oxidation chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mechanistic insights into a heterobifunctional degrader-induced PTPN2/N1 complex

PTPN2 (protein tyrosine phosphatase non-receptor type 2, or TC-PTP) and PTPN1 are attractive immuno-oncology targets, with the deletion of Ptpn1 and Ptpn2 improving response to immunotherapy in disease models. Targeted protein degradation has emerged as a promising approach to drug challenging targets including phosphatases. We developed potent PTPN2/N1 dual heterobifunctional degraders (Cmpd-1 and Cmpd-2) which facilitate efficient complex assembly with E3 ubiquitin ligase CRL4 CRBN , and mediate potent PTPN2/N1 degradation in cells and mice. To provide mechanistic insights into the cooperative complex formation introduced by degraders, we employed a combination of structural approaches. Our crystal structure reveals how PTPN2 is recognized by the tri-substituted thiophene moiety of the degrader. We further determined a high-resolution structure of DDB1-CRBN/Cmpd-1/PTPN2 using single-particle cryo-electron microscopy (cryo-EM). This structure reveals that the degrader induces proximity between CRBN and PTPN2, albeit the large conformational heterogeneity of this ternary complex. The molecular dynamic (MD)-simulations constructed based on the cryo-EM structure exhibited a large rigid body movement of PTPN2 and illustrated the dynamic interactions between PTPN2 and CRBN. Together, our study demonstrates the development of PTPN2/N1 heterobifunctional degraders with potential applications in cancer immunotherapy. Furthermore, the developed structural workflow could help to understand the dynamic nature of degrader-induced cooperative ternary complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗