Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Single Crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Bithermal low-cycle fatigue behavior of a NiCoCrAlY-coated single crystal superalloy

Specimens of a single crystal superalloy, PWA 1480, both bare and coated with a NiCoCrAlY alloy, PWA 276, were tested in low-cycle fatigue at 650 and 1050 C, and in bithermal thermomechanical fatigue tests. In the two bithermal test types, tensile strain was imposed at one of the two temperatures and reversed in compression at the other. In the high-strain regime, lives for both bithermal test types approached that for the 650 C isothermal test on an inelastic strain basis, all being controlled by the low ductility of the superalloy at 650 C. In the low-strain regime, coating cracking reduced life in the 650 C isothermal test. The bithermal test imposing tension at 650 C, termed out-of-phase, also produced rapid surface cracking, but in both coated and bare specimens. Increased crack growth rates also occurred for the out-of-phase test. Increased lives in vacuum suggested that there is a large environmental contribution to damage in the out-of-phase test due to the 1050 C exposure followed by tensile straining at the low temperature.

Gayda, J.↗

Secondary arm coarsening and microsegregation in superalloy PWA-1480 single crystals: Effect of low gravity

Single crystal specimens of nickel base superalloy PWA-1480 were directionally solidified on ground and during low gravity (20 sec) and high gravity (90 sec) parabolic maneuver of KC-135 aircraft. Thermal profiles were measured during solidification by two in-situ thermocouples positioned along the sample length. The samples were quenched during either high or low gravity cycles so as to freeze the structures of the mushy zone developing under different gravity levels. Microsegregation was measured by examining the solutal profiles on several transverse cross-sections across primary dendrites along their length in the quenched mushy zone. Effect of gravity level on secondary arm coarsening kinetics and microsegregation have been investigated. The results indicate that there is no appreciable difference in the microsegregation and coarsening kinetics behavior in the specimens grown under high or low gravity. This suggests that short duration changes in gravity/levels (0.02 to 1.7 g) do not influence convection in the interdendritic region. Examination of the role of natural convection, in the melt near the primary dendrite tips, on secondary arm spacings requires low gravity periods longer than presently available on KC-135. Secondary arm coarsening kinetics show a reasonable fit with the predictions from a simple analytical model proposed by Kirkwood for a binary alloy.

Vijayakumar, M.↗

Divalent-ion-doped single crystal alkali halide scintillators

A single crystal composition includes an alkali halide crystal doped with a divalent element in the amount of 0.5 to 5 weight percent, the doped crystal having an optical transmission of at least 45% at at least one wavelength. An alkali halide doped with at least one of europium and ytterbium is particularly useful as a scintillator.

36 MATERIALS SCIENCE↗

Elastic response of zone axis (001)-oriented PWA 1480 single crystal: The influence of secondary orientation

The influence of secondary orientation on the elastic response of a zone axis (001)-oriented nickel-base single-crystal superalloy, PWA 1480, was investigated under mechanical loading conditions by applying finite element techniques. Elastic stress analyses were performed with a commercially available finite element code. Secondary orientation of the single-crystal superalloy was offset with respect to the global coordinate system in increments from 0 to 90 deg and stresses developed within the single crystal were determined for each loading condition. The results indicated that the stresses were strongly influenced by the angular offset between the secondary crystal orientation and the global coordinate system. The degree of influence was found to vary with the type of loading condition (mechanical, thermal, or combined) imposed on the single-crystal superalloy.

Kalluri, Sreeramesh↗

Elastic response of (001)-oriented PWA 1480 single crystal - The influence of secondary orientation

The influence of secondary orientation on the elastic response of a zone axis (001)-oriented nickel-base single-crystal superalloy, PWA 1480, was investigated under mechanical loading conditions by applying finite element techniques. Elastic stress analyses were performed with a commercially available finite element code. Secondary orientation of the single-crystal superalloy was offset with respect to the global coordinate system in increments from 0 to 90 deg and stresses developed within the single crystal were determined for each loading condition. The results indicated that the stresses were strongly influenced by the angular offset between the secondary crystal orientation and the global coordinate system. The degree of influence was found to vary with the type of loading condition (mechanical, thermal, or combined) imposed on the single-crystal superalloy.

Kalluri, Sreeramesh↗

Single-crystal micro/nanostructures and thin films of lamellar molybdenum oxide by solid-state pyrolysis of organometallic derivatives of a cyclotriphosphazene

The solid-state pyrolysis of organometallic derivatives of a cyclotriphosphazene is demonstrated to be a new, simple and versatile solid-state templating method for obtaining single-crystal micro- and nanocrystals of transition and valve metal oxides. The technique, when applied to Mo-containing organometallics N{sub 3}P{sub 3}[OC{sub 6}H{sub 4}CH{sub 2}CN.Mo(CO){sub 5}]{sub 6} and N{sub 3}P{sub 3}[OC{sub 6}H{sub 4}CH{sub 2}CN.Mo(CO){sub 4} py]{sub 6}, results in stand-alone and surface-deposited lamellar MoO{sub 3} single crystals, as determined by electron and atomic force microscopies and X-ray diffraction. The size and morphology of the resulting crystals can be tuned by the composition of the precursor. X-ray photoelectron and infrared spectroscopies indicate that the deposition of highly lamellar MoO{sub 3} directly on an oxidized (400 nm SiO{sub 2}) surface or (100) single-crystal silicon surfaces yields a layered uniphasic single-crystal film formed by cluster diffusion on the surface during pyrolysis of the metal-carbonyl derivatives. For MoO{sub 3} in its layered form, this provides a new route to an important intercalation material for high energy density battery materials. - Graphical abstract: Lamellar MoO{sub 3} micro- and nanocrystals are prepared by pyrolysis of the organometallics N{sub 3}P{sub 3}[OC{sub 6}H{sub 4}CH{sub 2}CN.Mo(CO){sub 5}]{sub 6} (I) and N{sub 3}P{sub 3}[OC{sub 6}H{sub 4}CH{sub 2}CN.Mo(CO){sub 4} py]{sub 6} (II), in air at 800 {sup o}C. The single-crystal products exhibit a high degree of turbostratic layering (see image). Deposition and subsequent pyrolysis of uniphasic MoO{sub 3} from the precursors is also possible on suitable substrates and supports.

36 MATERIALS SCIENCE↗

Formation and conversion mechanisms between single-crystal gamma-MnOOH and manganese oxides

Highlights: ► Single-crystal γ-MnOOH was obtained via hydrothermal method. ► α-MnO{sub 2} was transformed to γ-MnOOH by a dissolution-growth-recrystallization process. ► α-MnO{sub 2} preferred growth on (111{sup ¯}) crystal plane of γ-MnOOH. ► γ-MnOOH was a useful precursor to prepare manganese oxide via calcination. -- Abstract: Formation and conversion mechanisms between single-crystal gamma-MnOOH and manganese oxides had investigated systematically. Without extra surfactant or template, α-MnO{sub 2} nanorods and prismatic single crystalline γ-MnOOH rods had been synthesized under hydrothermal treatment in this study. The formation and conversion mechanisms of prismatic γ-MnOOH rod were investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). It was found that the formation process includes three evolution stages: (1) formation of α-MnO{sub 2} nanorods whiskers; (2) transformation from α-MnO{sub 2} nanorods to prismatic γ-MnOOH rods by a dissolution-growth-recrystallization process; and (3) preferred growth on (111{sup ¯}) crystal plane. In addition, β-MnO{sub 2}, Mn{sub 2}O{sub 3} or Mn{sub 3}O{sub 4} rods could be obtained by calcination of the γ-MnOOH rods at different temperatures, which indicated that γ-MnOOH is an important precursor for preparing manganese oxides. The morphology and dimension of γ-MnOOH rods remained unchanged after converted to β-MnO{sub 2}, Mn{sub 2}O{sub 3} and Mn{sub 3}O{sub 4}.

36 MATERIALS SCIENCE↗

Locking oxygen in lattice: A quantifiable comparison of gas generation in polycrystalline and single crystal Ni-rich cathodes

High-energy Ni-rich NMC (LiNi x Mn y Co 1-x-y O 2 , x ≥ 0.6) is a very promising cathode material in Li-ion batteries but the gas generation during cycling is a significant safety concern and becomes the major roadblock of the large-scale commercialization of Ni-rich NMC cathode materials. Micron-sized single crystal Ni-rich NMC has a potential to address the common issues that polycrystals have. However, it is unknown if gassing issue will be mitigated or even eliminated by using single crystals, not mentioning a quantifiable understanding of gas generation from single crystals and polycrystals. This work takes LiNi 0.76 Mn 0.14 Co 0.1 O 2 (NMC76) as a model material to study the mechanism of gas generation from single crystal and polycrystalline NMC by using both coin cells and pouch cells, which provides different conclusions on the generated gases, highlighting the importance of using relevant testing conditions for fundamental diagnostic study on battery materials. Further, the information from single crystal NMC also provides critical insights from material perspective to enhance the safety attributes of Ni-rich NMC cathodes.

25 ENERGY STORAGE↗

Hydrogen induced fracture characteristics of single crystal nickel-based superalloys

A stereoscopic method for use with x ray energy dispersive spectroscopy of rough surfaces was adapted and applied to the fracture surfaces single crystals of PWA 1480E to permit rapid orientation determinations of small cleavage planes. The method uses a mathematical treatment of stereo pair photomicrographs to measure the angle between the electron beam and the surface normal. One reference crystal orientation corresponding to the electron beam direction (crystal growth direction) is required to perform this trace analysis. The microstructure of PWA 1480E was characterized before fracture analysis was performed. The fracture behavior of single crystals of the PWA 1480E nickel-based superalloy was studied. The hydrogen-induced fracture behavior of single crystals of the PWA 1480E nickel-based superalloy was also studied. In order to understand the temperature dependence of hydrogen-induced embrittlement, notched single crystals with three different crystal growth orientations near zone axes (100), (110), and (111) were tensile tested at 871 C (1600 F) in both helium and hydrogen atmospheres at 34 MPa. Results and conclusions are given.

Chen, Po-Shou↗

The orbital effect on the anomalous magnetism and evolution in La $x$ Y 1-$x$ VO 3 (0 ≤ $x$ ≤ 0.2) single crystals

The orbital effect on the anomalous magnetism and evolution of single crystals with low La doping, La $x$ Y 1-$x$ VO 3 ($x$ = 0, 0.1, and 0.2), has been studied using single-crystal X-ray diffraction, specific heat, magnetization, and Raman-scattering techniques. It is found that substituting Y 3+ by La 3+ increases the degeneracy of the $yz/zx$ orbitals and decreases the Jahn-Teller distortion. These weakens the G-type (antiphase ordering along the c axis) orbital ordering phase. Meanwhile, the substituting decreases the magnetism entropy, indicating the shrinking of the t 2g and e g orbital hybridization, eventually destabilizing the C-type (in-phase ordering along the c axis) antiferromagnetic ordering phase. In addition, the mechanism for the shrinking of the diamagnetism with increasing $x$ is analyzed. In conclusion, it may attribute to the competition between the antisymmetric Dzyaloshinsky–Moriya interaction and the single-ion anisotropy.

36 MATERIALS SCIENCE↗

Influence of Sn on the thermoelectric properties of (Bi{sub x}Sb{sub 1-x}){sub 2}Te{sub 3} single crystals

The influence of tin on the thermoelectric properties of p-(Bi{sub x}Sb{sub 1-x}){sub 2}Te{sub 3} single crystals (x=0; 0.25; 0.5) has been investigated. The temperature dependence of the Seebeck coefficient S, the electrical conductivity {sigma}, the heat conductivity k and the thermoelectric figure of merit of p-(Bi{sub x}Sb{sub 1-x}){sub 2}Te{sub 3} single crystals were measured in the temperature range 7-300 K. By an increase the Sn content, the hole concentration increases in p-(Bi{sub x}Sb{sub 1-x}){sub 2-y}Sn{sub y}Te{sub 3}. The heat conductivity k of the p-(Bi{sub x}Sb{sub 1-x}){sub 2-y}Sn{sub y}Te{sub 3} crystals decreases due to the Sn doping, while the electrical conductivity {sigma} increases in the temperature interval about 200<T<300 K and decreases at T<200 K. The Seebeck coefficient S for all compositions is positive and decreases due to the Sn doping in the whole temperature range. The scattering on the ionized impurity increases due to Sn doping. - Graphical abstract: Influence of tin on the thermoelectric properties of p-(Bi{sub x}Sb{sub 1-x}){sub 2}Te{sub 3} single crystals (x=0; 0.25; 0.5) has been investigated. Temperature dependence of Seebeck coefficient S, electrical conductivity {sigma}, thermal conductivity k and figure of merit of p-(Bi{sub x}Sb{sub 1-x}){sub 2}Te{sub 3} single crystals were measured in the temperature range 7-300 K. Electrical conductivity increases in the temperature interval 150K<T<300 K and decreases at T<150 K with Sn-doping. Concentration of holes and electrical conductivity decreases when the value of Bi content x increases in solid solution (Bi{sub x}Sb{sub 1-x}){sub 2}Te{sub 3} as shown in figure. By increasing the Sn content, the hole concentration increases in p-(Bi{sub x}Sb{sub 1-x}){sub 2-y}Sn{sub y}Te{sub 3}. The thermal conductivity k of the p-(Bi{sub x}Sb{sub 1-x}){sub 2-y}Sn{sub y}Te{sub 3} crystals decreases due to Sn doping. The Seebeck coefficient S for all compositions is positive and decreases due to Sn doping in the whole temperature range due to increase of the hole concentration under Sn doping. Highlights: Black-Right-Pointing-Pointer thermoelectric figure of merit for p-(Bi{sub x}Sb{sub 1-x}){sub 2}Te{sub 3} investigated at 7-300 K. Black-Right-Pointing-Pointer preferential scattering is ionized impurity scattering in Sn doped samples. Black-Right-Pointing-Pointer electrical conductivity increases at 150 K<T<300 K and decreases at T<150 K. Black-Right-Pointing-Pointer the hole concentration increases in p-(Bi{sub x}Sb{sub 1-x}){sub 2-y}Sn{sub y}Te{sub 3} with Sn doping. Black-Right-Pointing-Pointer the thermal conductivity of (Bi{sub x}Sb{sub 1-x}){sub 2-y}Sn{sub y}Te{sub 3} decreases due to Sn doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-crystal and textured polycrystalline Nd2Fe14B flakes with a submicron or nanosize thickness

This paper reports on the fabrication, structure and magnetic property optimization of Nd2Fe14B single-crystal and [0 0 1] textured poly-nanocrystalline flakes prepared by surfactant-assisted high-energy ball milling (HEBM). Single-crystal Nd2Fe14B flakes first with micron and then with submicron thicknesses were formed via continuous basal cleavage along the (1 1 0) planes of the irregularly shaped single-crystal microparticles during the early stage of HEBM. With further milling, [0 0 1] textured polycrystalline submicron Nd2Fe14B flakes were formed. Finally, crystallographically anisotropic polycrystalline Nd2Fe14B nanoflakes were formed after milling for 5-6 h. Anisotropic magnetic behavior was found in all of the flake samples. Nd2Fe14B flakes prepared with either oleic acid (OA) or oleylamine (OY) as the surfactant exhibited similar morphology, structure and magnetic properties. Both the addition of some low-melting-point eutectic Nd70Cu30 alloy and an appropriate post-annealing can increase the coercivity of the Nd2Fe14B flakes. The coercivity of Nd2Fe14B nanoflakes with an addition of 16.7 wt.% Nd70Cu30 by milling for 5 h in heptane with 20 wt.% OY increased from 3.7 to 6.8 kOe after annealing at 450 degrees C for 0.5 h. The mechanism for formation and coercivity enhancement of Nd2Fe14B single-crystal and textured poly-nanocrystalline flakes with a submicron or nanosize thickness was discussed. (C) 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Cui, BZ↗

Transport in organic single-crystal microbelt for conformal electronics

We showed the advantages of flexible rubrene organic single-crystal microbelts in high-performance devices and circuits towards conformal electronics. The anisotropic transport based on the only one organic microbelt was studied by a “cross-channel” method, and the rubrene microbelt showed the highest mobility up to 26 cm{sup 2}/V s in the length direction. Based on an individual rubrene microbelt, the organic single-crystal circuit with good adherence on a pearl ball and the gain as high as 18 was realized. These results present great potential for applications of organic single-crystal belts in the next-generation conformal electronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generalized Reliability Methodology Applied to Brittle Anisotropic Single Crystals

A generalized reliability model was developed for use in the design of structural components made from brittle, homogeneous anisotropic materials such as single crystals. The model is based on the Weibull distribution and incorporates a variable strength distribution and any equivalent stress failure criteria. In addition to the reliability model, an energy based failure criterion for elastically anisotropic materials was formulated. The model is different from typical Weibull-based models in that it accounts for strength anisotropy arising from fracture toughness anisotropy and thereby allows for strength and reliability predictions of brittle, anisotropic single crystals subjected to multiaxial stresses. The model is also applicable to elastically isotropic materials exhibiting strength anisotropy due to an anisotropic distribution of flaws. In order to develop and experimentally verify the model, the uniaxial and biaxial strengths of a single crystal nickel aluminide were measured. The uniaxial strengths of the <100> and <110> crystal directions were measured in three and four-point flexure. The biaxial strength was measured by subjecting <100> plates to a uniform pressure in a test apparatus that was developed and experimentally verified. The biaxial strengths of the single crystal plates were estimated by extending and verifying the displacement solution for a circular, anisotropic plate to the case of a variable radius and thickness. The best correlation between the experimental strength data and the model predictions occurred when an anisotropic stress analysis was combined with the normal stress criterion and the strength parameters associated with the <110> crystal direction.

Salem, Jonathan A.↗

UV and IR emission intensity in ZnO films, nanorods, and bulk single crystals doped with Er and additionally introduced impurities

For ZnO films, nanorods, and bulk single crystals doped with Er{sup +} ions, it is shown that the effect of codopants introduced into the cation and ion sublattices and the observation of a high-intensity emission band at the wavelength λ{sub max} = 1535 nm are defined by the local environment of the Er{sup +} ion. Doping of the films and single crystals with Er{sup +} ions by diffusion brings about an infrared (IR) emission band with a low intensity because of an inadequate concentration of impurity ions. The emission intensity of this band can be raised by introducing additional Ag, Au, or N{sup +} impurities into the ZnO films. The UV-emission intensity of the Er-doped films and single crystals at λ{sub max} = 368–372 nm is identical to that of the undoped films. ZnO nanorods doped with Er only or together with Al or Ga codopants exhibit only one IR band (at λ{sub max} = 1535 nm), whose intensity decreases upon the introduction of codopants. Doping of the nanorods with the N{sup +} gaseous impurity during growth (930 < T < 960°C) and then with the Er{sup +} impurity by diffusion does not yield a substantial increase in the IR-emission intensity compared to the that of the corresponding band for nanorods not doped with the N{sup +} impurity. In the Er-doped nanorods, whose photoluminescence spectra exhibit a high-intensity band at λ{sub max} = 1535 nm, the UV emission band at λ{sub max} = 372 nm is practically lacking.

36 MATERIALS SCIENCE↗

Growth of high quality bulk size single crystals of inverted solubility lithium sulphate monohydrate

The paper summarizes the processes of growing large lithium sulfate monohydrate (LSMH) single crystals. We have established a procedure to grow high quality bulk size single crystals of inverted solubility LSMH by a newly developed unidirectional crystallization technique called the Sankeranarayenan - Ramasamy (SR) method. The convective flow of crystal growth processes from solution and the conditions of growing crystals of various aspects were discussed. Good quality LSMH single crystal is grown of the size 20 mmX80 mm without cracks, localized-defects and inclusions. The as-grown crystals are suitable for piezoelectric and nonlinear optical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Magnetic Fields on g-jitter Induced Convection and Solute Striation During Space Processing of Single Crystals

A 2-D finite element model is presented for the melt growth of single crystals in a microgravity environment with a superimposed DC magnetic field. The model is developed based on the deforming finite element methodology and is capable of predicting the phenomena of the steady and transient convective flows, heat transfer, solute distribution, and solid-liquid interface morphology associated with the melt growth of single crystals in microgravity with and without an applied magnetic field. Numerical simulations were carried out for a wide range of parameters including idealized microgravity conditions, the synthesized g-jitter and the real g-jitter data taken by on-board accelerometers during space flights. The results reveal that the time varying g-jitter disturbances, although small in magnitude, cause an appreciable convective flow in the liquid pool, which in turn produces detrimental effects during the space processing of single crystal growth. An applied magnetic field of appropriate strength, superimposed on microgravity, can be very effective in suppressing the deleterious effects resulting from the g-jitter disturbances.

deGroh, H. C.↗

Single Crystals of Vanadium Oxides as a Lens for Understanding Structural and Electronic Phase Transformations, Ion Transport, Chemo-Mechanical Coupling, and Electrothermal Neuronal Emulation

Vanadium oxides cystallize in a diverse array of structures and compositions arising from the redox versatility of vanadium, variable covalency of V−O bonds, and myriad coordination geometries. Their open frameworks present abundant interstitial sites that enable insertion of guest-ions. In such compounds, V3d electron and spin localization and disorder couple strongly to structural preferences. The rich structural diversity manifests as a “rugged” free energy landscape with multiple interconvertible polymorphs. Such a landscape sets up structural, electronic, and magnetic transitions that underpin the promise of these materials as ion-insertion battery electrodes; compact primitives for brain-inspired computing, and heterogeneous catalysts. Here, we examine the structural and compositional diversity, electronic instabilities, defect dynamics, structure transformations, mechanical properties, and surface structure of vanadium oxides using single crystals as a distinctive lens. Single crystals enable the measurement of structure−function correlations without the ensemble and orientational averaging inevitable in polycrystalline materials. Their well-defined surfaces further enable examination of facet-dependent reactivity toward molecular adsorbates, ion fluxes, and lattice (mis)matched solids. We provide a comprehensive account of vanadium-oxide single-crystal studies, from delineation of common structural motifs to single-crystal growth techniques, topochemical modification strategies, mechanisms underpinning electronic instabilities, and implementation as electrothermal neurons and battery electrode materials.

Ponis, John [Texas A&M University, College Station↗