Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shock dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Time-resolved unsteady shock motion and spectral analysis of a hypersonic shock-wave/boundary-layer interaction over a double-cone

Direct experimental measurements of double-cone shock-wave/boundary-layer interaction dynamics at Mach 7.2 were collected using a schlieren-based shock-detection algorithm at the University of Texas at San Antonio. The points of flow separation and reattachment were spatially and spectrally evaluated at 300 kHz for time-resolved characterization of the unsteadiness of this flow field. The separation bubble was found to rapidly expand and contract about a large mean length. Spectral analysis of the velocity fluctuations of this motion revealed this behavior to be a turbulent phenomenon, with spectral energy trends consistent with the Kolmogorov theory for the turbulent energy cascade.

Glasby, Ryan [ORNL]↗

Validation of 266 nm UV Raman thermometry using the alpha-to-beta quartz transition

Ultraviolet Raman scattering is a promising diagnostic for temperature measurements relevant to dynamic compression experiments, where improved signal strength and reduced background are critical. In this work, we experimentally validate Raman thermometry at 266 nm using crystalline quartz heated through the α to β phase transition in a tube furnace. Quartz provides a useful benchmark because of its well-characterized transition temperature near 846 K at ambient pressure. Temperatures inferred from the Stokes to anti-Stokes intensity ratio are compared with thermocouple measurements and with the observed phase transition. Single-shot Raman temperatures track the thermocouple closely, with an empirical single-shot scatter of approximately ±15 K under the present conditions. Temporal averaging reduces shot-to-shot scatter and improves agreement between the Raman temperatures and thermocouple readings to within approximately 8 K, while the transition is identified within 5 K of the accepted value. Measurements are performed using the fourth harmonic of a nanosecond pulsed Nd:YAG laser at 266 nm. The shorter excitation wavelength provides enhanced Raman scattering efficiency and reduced visible background relative to conventional visible excitation. Comparison with 532 nm Raman measurements acquired in the same experimental geometry demonstrates substantially improved signal-to-noise ratio for the UV configuration. These results establish 266 nm Raman thermometry as a reliable and accurate temperature diagnostic under controlled heating conditions and provide a quantitative benchmark for future application in dynamic compression and shock physics experiments.

Chemistry - Chemical explosives↗

RADIATIVE COOLING IN RELATIVISTIC COLLISIONLESS SHOCKS: CAN SIMULATIONS AND EXPERIMENTS PROBE RELEVANT GAMMA-RAY BURST PHYSICS?

We address the question of whether numerical particle-in-cell (PIC) simulations and laboratory laser-plasma experiments can (or will be able to, in the near future) model realistic gamma-ray burst (GRB) shocks. For this, we compare the radiative cooling time, t{sub cool}, of relativistic electrons in the shock magnetic fields to the microscopic dynamical time of collisionless relativistic shocks-the inverse plasma frequency of protons, {omega}{sup -1}{sub pp}. We obtain that for t{sub cool}{omega}{sup -1} {sub pp}{approx}< few hundred, the electrons cool efficiently at or near the shock jump and are capable of emitting away a large fraction of the shock energy. Such shocks are well resolved in existing PIC simulations; therefore, the microscopic structure can be studied in detail. Since most of the emission in such shocks would be coming from the vicinity of the shock, the spectral power of the emitted radiation can be directly obtained from finite-length simulations and compared with observational data. Such shocks have very high radiative efficiency and correspond to the internal baryon-dominated GRB shocks for the conventional range of ejecta parameters. Fermi acceleration of electrons in such shocks is limited by electron cooling, hence the emitted spectrum should be lacking a nonthermal tail, whereas its peak likely falls in the multi-MeV range. For lower radiative efficiency shocks, these constraints are relaxed: the peak energy is smaller and the nonthermal tail can be expected to form. Incidentally, the conditions in internal shocks are almost identical to those in laser-produced plasmas; thus, such GRB-like plasmas can be created and studied in laboratory experiments using the presently available Petawatt-scale laser facilities. An analysis of the external shocks shows that only the highly relativistic shocks, corresponding to the extremely early afterglow phase, can have efficient electron cooling in the shock transition. We emphasize the importance of radiative PIC simulations for further studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temporal and angular variations of 3D core-collapse supernova emissions and their physical correlations

Abstract We provide the time series and angular distributions of the neutrino and gravitational wave emissions of 11 state-of-the-art 3D non-rotating core-collapse supernova models and explore correlations between these signatures and the real-time dynamics of the shock and the proto-neutron star (PNS) core. The neutrino emissions are roughly isotropic on average, with instantaneous excursions about the mean inferred luminosity of as much as ±20 per cent. The deviation from isotropy is least for the ‘νμ’-type neutrinos and the lowest mass progenitors. Instantaneous temporal luminosity variations along a given direction for exploding models average ∼2–4 per cent, but can be as high as ∼10 per cent. For non-exploding models, they can achieve ∼25 per cent. The temporal variations in the neutrino emissions correlate with the temporal and angular variations in the mass accretion rate. We witness the lepton-number emission self-sustained asymmetry (LESA) phenomenon in all our models and find that the vector direction of the LESA dipole and that of the inner Ye distribution are highly correlated. For our entire set of 3D models, we find strong connections between the cumulative neutrino energy losses, the radius of the proto-neutron star, and the f-mode frequency of the gravitational wave emissions. When physically normalized, the progenitor-to-progenitor variation in any of these quantities is no more than ∼10 per cent. Moreover, the reduced f-mode frequency is independent of time after bounce to better than ∼10 per cent. Therefore, simultaneous measurement of gravitational waves and neutrinos from a given supernova event can be used synergistically to extract real physical quantities of the supernova core.

79 ASTRONOMY AND ASTROPHYSICS↗

Adaptive Stiffness Power Take-Off System for a Hydraulic Hose-Pump Point Absorber Wave Energy Converter

Two crucial challenges faced in the design of ocean wave energy converters (WECs) are maintaining high capacity factors and remaining robust in everchanging, harsh ocean environments. This study introduces a novel mechanism for achieving reactive WEC control with a soft hydraulic power take-off, thereby addressing both challenges. The device of interest involves a hydraulic pump, constructed from a fluidic flexible matrix composite (F2MC), which is cyclically stretched by driving waves and pressurizes working fluid through a turbine-generator. This class of fiber-reinforced stretch hoses is established for ocean use as robust moorings and shock absorbers. The dynamic properties of the F2MC pump depend on internal pressure, which can be controlled by a continuously variable transmission between the turbine and generator, allowing the system to be adapted for better performance over a wide range of wave conditions. This work presents a dynamic model for operation and adaptive behavior of this power take-off system, experimentally validates components of the model, and performs dynamic simulations of the system that show increases in power production and capacity factor compared to non-adaptive operation for a variety of driving wave conditions. This work develops the basis for future large-scale experimental testing and controller design of this system.

Wave energy conversion, fluidic flexible matrix co↗

Influence of Grain Boundary Properties and Orientation on Void Nucleation

For ductile metals, dynamic fracture during shock loading is thought to occur through void nucleation, growth, and then coalescence that leads to material failure. Particularly for high purity metals, it has been observed by numerous investigators that, under incipient spall conditions, voids appear to heterogeneously nucleate at some grain boundaries, but not others. Several factors can affect the void nucleation stress at a grain boundary, such as grain boundary structure, orientation with respect to the loading direction, energy and excess volume, in addition to its interactions with dislocations. In this work, we focus on the influence of loading direction with respect to the grain boundary plane and grain boundary properties such as energy and excess volume on the stress required for void nucleation of a grain boundary, in copper from moleculardynamics simulations. Flyer plate simulations were carried out for four boundary types with different energies and excess volumes. These boundaries were chosen as model systems to represent various boundaries observed in “real” materials. Simulations indicate that there is no direct correlation between the void nucleation stress at a boundary and either its energy and excess volume. This result suggests that average properties of grain boundaries alone are not sufficient indicators of the spall strength of a boundary and perhaps local boundary properties need to be taken into account in order to predict its susceptibility to void nucleation for broad ranges of materials. We also present both experimental and simulation results corresponding to the affect of orientation on void nucleation.

36 MATERIALS SCIENCE↗

FICH: Feature instability cavitation history [Slides]

We seek to improve our ability to predict and understand the Richtmyer-Meshkov (RM) unstable dynamics of explosively shocked isolated features interfaced with vacuum or gases, and an HE products cavity. Explosively shocked features form as 2D or 3D RM phenomena. Liquid cavitation cause cavitation bubbles when shockwaves collide, and cavitation waves from wave interactions with isolated features form that source mass into the RM unstable sheets or spikes, and the cavitation waves may slice through bulk material into the HE products cavity.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Four Channel Time Multiplexed Photonic Doppler Velocimetry using an Optical Switch

Photonic Doppler Velocimetry (PDV) is a diagnostic commonly used in shock physics and dynamic compression experiments to reliably get velocity information from experiments. In PDV systems, a common method of reducing experimental cost is to use time and frequency multiplexing to increase the number of PDV probes. With time multiplexing, interference between probes is a frequent problem. In this report, we look at using a high-speed optical switch to reduce this interference, including measuring the amount of interference generated to determine if it has the potential to affect experiments and integrating a time multiplexing system into an experiment. We find that, when applied to PDV systems, there is approximately (-23.4 ± 0.9) dB of interference measured in the short time Fourier transform between switch inputs. When an optical switch based time multiplexing system was integrated into a dynamic compression experiment, the system was able to successfully combine the signals from four different PDV probes onto a single optical cable without unacceptable levels of interference in the spectrogram. An optical switch based time multiplexing system appears to be a promising method for reducing the cost of fielding larger numbers of PDV probes in an experiment.

47 OTHER INSTRUMENTATION↗

Merger-induced shocks in the nearby LIRG VV 114 through methanol observations with ALMA

We report the detection of two CH{sub 3}OH lines (J{sub K} = 2{sub K}–1{sub K} and 3{sub K}–2{sub K}) between the progenitor’s disks (“Overlap”) of the mid-stage merging galaxy VV 114 obtained using the Atacama Large Millimeter/submillimeter Array (ALMA) Band 3 and Band 4. The detected CH{sub 3}OH emission shows an extended filamentary structure (∼3 kpc) across the progenitor’s disks with relatively large velocity width (FWZI ∼ 150 km s{sup −1}). The emission is only significant in the “overlap” and not detected in the two merging nuclei. Assuming optically thin emission and local thermodynamic equilibrium, we found the CH{sub 3}OH column density relative to H{sub 2} (X{sub CH{sub 3OH}}) peaks at the “Overlap” (∼8 × 10{sup −9}), which is almost an order of magnitude larger than that at the eastern nucleus. We suggest that kpc-scale shocks driven by galaxy–galaxy collision may play an important role to enhance the CH{sub 3}OH abundance at the “Overlap.” This scenario is consistent with shock-induced large velocity dispersion components of ionized gas that have been detected in optical wavelength at the same region. Conversely, low X{sub CH{sub 3OH}} at the nuclear regions might be attributed to the strong photodissociation by nuclear starbursts and/or a putative active galactic nucleus, or inefficient production of CH{sub 3}OH on dust grains due to initial high-temperature conditions (i.e., desorption of the precursor molecule, CO, into gas phase before forming CH{sub 3}OH on dust grains). These ALMA observations demonstrate that CH{sub 3}OH is a unique tool to address kpc-scale shock-induced gas dynamics and star formation in merging galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulations of Precessing Jets and the Formation of X-shaped Radio Galaxies

Abstract Jet precession is sometimes invoked to explain asymmetries in radio galaxy (RG) jets and “X/S/Z-shaped” RGs, caused by the presence of a binary black hole companion to the source active galactic nucleus or by accretion instabilities. We present a series of simulations of RG jet precession to examine how these sources would evolve over time, including a passive distribution of cosmic-ray electrons so we can model radio synchrotron emissions and create synthetic radio maps of the sources. We find that a single source viewed from different angles can result in differing RG morphological classifications, confusing physical implications of these classifications. Additionally, the jet trajectories can become unstable due to their own self-interactions and lead to “reorientation events” that may look like the effects of external dynamics such as shocks, winds, or cold fronts in the medium. Finally, something akin to an “Odd Radio Circle” may be observed in the case of viewing the radio remnant of such a precessing source from a line of sight near the precession axis.

79 ASTRONOMY AND ASTROPHYSICS↗

Quick-Change Holder for Aeronautical-Research Microphones

Mounting holds microphone flush with aircraft surface and maintains pressure seal. Microphones, which measure dynamic pressure and shock waves as they pass over aircraft fuselage or other experimental body, mounted through fuselage flush with outside surface. Besides being faster and easier to use than older mounts, new mount prevents damage to microphone on removal because no sealant to be cut and scraped away.

Cohn, R.↗

Hybrid simulations of intermediate shocks - Coplanar and noncoplanar solutions

A hybrid code is used to investigate the kinetic structure and stability of subfast intermediate shocks (IS) formed dynamically by the interaction between a flowing plasma and a stationary piston. Results of the kinetic simulation of noncoplanar ISs are compared with predictions of the MHD theory. The relevance of the results of the study to observations of the magnetopause is discussed.

Karimabadi, H.↗

Modeling the Extended Neutral Atmosphere and Plasma Environment near Saturn

In the three years of this study we have published five papers in refereed journals. We have first examined satellite sources and their contribution to the observed neutral cloud. Based on the total calculated satellite sources and the spatial distribution of sputtered H20, we concluded that they cannot produce observed OH cloud. The E-ring contribution has been also studied in detail.In order to produce observed OH cloud we suggested that the E-ring might be the dominant source in inner Saturnian magnetosphere. We proposed a possible resupply mechanism which is needed to keep both E-ring and OH cloud in the present state: collisions between E-ring grains and remains of a disrupted satellite near Enceladus Lagrangian points. In this scenario a large amount of material, ranging from a few micrometers to hundred of meters, which is optically invisible at present, is likely to exist there. The fourth paper compares the magnetosheaths of the outer planets. A surprising result is that the hot proton component comprises about 40% of the total density, much larger than predicted by shock theory. Gas dynamic models of the boundaries show that the magnetospheres of Jupiter and Saturn are flattened at the poles. The last paper was published in GRL and is the first based of the model of neutrals developed as a main goal of this grant and which is now operational.This Monte Carlo collision code self- consistently determines the neutral distribution. from the rings and satellites until they are lost by ionization, by collisions with rings, moons, or Saturn, or by escape from Saturn. Our model is unique in that it includes the effects of plasma chemistry and both plasma-neutral and neutral neutral collisions to determine the dynamical evolution of the water group neutrals in Saturn's magnetosphere. The lifetimes of the neutrals against loss to photoionization, charge exchange, electron dissociation and electron impact dissociation are based on the model given by (Richardson et al. 1998) and vary with position in the magnetosphere. The dominant neutral dissociation channels H20->OH+H, H20-> O+H2, and OH->O+H2 are considered.

Richardson, John D.↗