Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SYNGAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Fuel properties and steam reactivity of solid waste streams from contingency bases

Highlights: • Composite waste fuels were prepared for characterizing fuel property and reactivity. • Characterization of the composite fuels can be predicted by individual components. • A simple methodology for characterizing multi-component solid wastes was validated. • Plastic components increase carbon content and HHV of solid waste fuels. • Effects of fuel composition on syngas production and composition were explored. - Abstract: The solid waste generated from military contingency bases (CBs) is a potential fuel for appropriately-scaled, waste to energy (WTE) systems. To inform WTE system design, fuel properties of seventeen components of synthetic contingency-base waste recipes from the literature were characterized for ultimate analysis, heating values, proximate analysis and reactivity in a steam atmosphere at three temperature typical of gasification conditions. A simple mathematical approach was applied to predict the properties and reactive behavior of composite mixtures using the weighted sum of the corresponding components, assuming negligible interaction between components. The method was validated using prepared composite mixture samples. In addition, chemical equilibrium calculations for steam gasification of the composite samples were conducted to explore the effects of waste composition variability on syngas production and composition.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Influence of Pelletization and Moisture Content of Oil Palm Empty Fruit Bunches (EFBs) on Dynamic Gasification Performance

Wet-ground empty fruit bunches (EFBs), dry-ground EFB, and pelletized EFB were gasified in a laboratory-scale updraft fixed-bed reactor at differing temperatures and equivalent ratios (ERs) between 0.19 and 0.78 to evaluate the performance and quality of the syngas under autothermal operating conditions. In addition, the theoretical estimation of the key performance indicator of the ashes on the performance of the gasification process was obtained. The results show that for ERs > 0.4 the autothermal operating condition was achieved for pretreatments with pelletized and dry-ground EFBs, with reactor operating temperatures T > 700 °C. With wet EFB, this condition is achieved at any ER value. The average composition of the syngas from pelletized EFB presented the best average concentrations of the combustible species CO, H2, and CH4 when the ER values were between 0.25 and 0.40. The highest hot and cold thermal efficiency values were obtained for the gasification of EFB pellets with ER values between 0.25 and 0.40. For ground EFB, increases in the ER value led to improvements in hot thermal efficiency. Finally, during the EFB pellet gasification tests, no agglomeration and sintering problems were evidenced in comparison with wet-ground and dry-ground EFBs that showed slag formation, especially at ER < 0.46.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Interaction of Methane with Calcium Ferrite in the Chemical Looping Partial Oxidation Application: Experimental and DFT Study

In this study, experimental studies using mass spectroscopy, thermogravimetric analysis, in situ X-ray diffraction (XRD), and theoretical density functional theory calculations were carried out to investigate the mechanism of methane partial oxidation over a CaFe 2 O 4 oxygen carrier. The XRD analysis revealed the formation of the calcium ferrite phases during methane reduction occurred in the sequence CaFe 2 O 4 →CaFe 3 O 5 + Ca 2 Fe 2 O 5 →FeO + Fe + CaO→Fe + CaO. Each of these phases was modeled using periodic density functional theory to study the activity of these phases for the reactivity with CH 4 , CO, and H 2 along with the adsorbed surface species to help elucidate the effect that phase changes during reduction have on the chemical looping products CO and H 2 . Mass spectroscopic analysis revealed the formation of H 2 O and CO 2 occurred prior to the formation of CO and H 2 , and these products may be due to the removal of lattice oxygen bound in the discrete primary phase, which contributes to a small portion (~16%) of the total transferable oxygen in the solid. The density functional theory (DFT) results suggest that the gaseous CO and H 2 are not thermodynamically favorable to react with the Ca 2 Fe 2 O 5 where the release of CO and H 2 led to an increase in selectivity for these products. The DFT results suggest that some of the adsorbed atomic hydrogen combined to form adsorbed H 2 and then gaseous H 2 on the CaFe 2 O 4 surface, while the carbon deposition and some adsorbed atomic hydrogen react to form the CaFe 3 O 5 and Ca 2 Fe 2 O 5 phases simultaneously. DFT simulations suggest that both the gaseous H 2 and adsorbed atomic H are less thermodynamically favorable to drive the deep reduction of Ca 2 Fe 2 O 5 to CaO and Fe0. The deep reduction of the calcium ferrite therefore favors the generation of syngas products (CO and H 2 ) through mechanisms of methane dehydrogenation and selective oxidation of carbon to CO. The significant difference in mechanisms for partial oxidation of methane to syngas with the CaFe 2 O 4 carrier can be correlated to the differences in the oxide phases present during the reduction process, concentration of oxygen species, and bonding in the lattice structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unraveling Adsorbate-Induced Structural Evolution of Iron Carbide Nanoparticles

Iron carbide (Fe x C y ) nanoparticles (NPs) are promising candidates for replacing platinum group metals in industrial applications, such as high-temperature Fischer–Tropsch synthesis. However, due to their amorphous nature, characterization of the active sites has been challenging experimentally and computationally. Here, using a combined density functional theory (DFT), neural network interatomic potential-assisted global optimization, and ensemble learning study, we evaluate dynamic surface changes associated with syngas (H and CO) interactions. For this purpose, we have developed a general procedure that we use to model an experimentally relevant 270-atom Fe 182 C 88 NP using the neural network-assisted stochastic surface walk global optimization algorithm (SSW-NN). Once generated, the Fe 182 C 88 NP active sites and particle morphology are thoroughly characterized before the effects of syngas adsorbate interactions are explored by using DFT and molecular dynamics simulations. Lastly, we explore correlations between geometric and electronic features of the active sites and the adsorption of H (H ads ), using a regularized random forest machine learning algorithm. In doing so, we identified the Fe–C coordination number and p orbital occupancy as the most important descriptors affecting H ads . Furthermore, using a combined ML and quantum chemistry approach, our work demonstrates a general and efficient procedure for generating and probing complex surface phenomena on binary nanoparticles.

Adsorption↗

Steam-Coal Gasification Using CaO and KOH for in Situ Carbon and Sulfur Capture

We present experimental results of coal gasification with and without the addition of calcium oxide and potassium hydroxide as dual-functioning catalyst-capture agents. Using two different coal types and temperatures between 700 and 900 °C, we studied the effect of these catalyst-capture agents on (1) the syngas composition, (2) CO 2 and H 2 S capture, and (3) the steam-coal gasification kinetic rate. The syngas composition from the gasifier was roughly 20% methane, 70% hydrogen, and 10% other species when a CaO/C molar ratio of 0.5 was added. We demonstrated significantly enhanced steam–coal gasification kinetic rates when adding small amounts of potassium hydroxide to coal when operating a CaO-CaCO 3 chemical looping gasification reactor. For example, the steam–coal gasification kinetic rate increased 250% when dry mixing calcium oxide at a Ca/C molar ratio of 0.5 with a sub-bituminous coal, and the kinetic rate increased 1000% when aqueously mixing calcium oxide at a Ca/C molar ratio of 0.5 along with potassium hydroxide at a K/C molar ratio of 0.06. In addition, we conducted multi-cycle studies in which CaCO 3 was calcined by heating to 900 °C to regenerate the CaO, which was then reused in repeated CaO-CaCO 3 cycles. The increased steam-coal gasification kinetics rates for both CaO and CaO + KOH persisted even when the material was reused in six cycles of gasification and calcination. The ability of CaO to capture carbon dioxide decreased roughly 2-4% per CaO-CaCO 3 cycle. We also discuss an important application of this combined gasifier-calciner to electricity generation and selling the purge stream as a precalcined feedstock to a cement kiln. In this scenario, the amount of purge stream required is fixed not by the degradation in the capture ability but rather by the requirements at the cement kiln on the amount of CaSO 4 and ash in the precalcined feedstock.

01 COAL, LIGNITE, AND PEAT↗

Development of an entrained flow gasifier model for process optimization study

Coal gasification is a versatile process to convert a solid fuel in syngas, which can be further converted and separated in hydrogen, which is a valuable and environmentally acceptable energy carrier. Different technologies (fixed beds, fluidized beds, entrained flow reactors) are used, operating under different conditions of temperature, pressure, and residence time. Process studies should be performed for defining the best plant configurations and operating conditions. Although 'gasification models' can be found in the literature simulating equilibrium reactors, a more detailed approach is required for process analysis and optimization procedures. In this work, a gasifier model is developed by using AspenPlus as a tool to be implemented in a comprehensive process model for the production of hydrogen via coal gasification. It is developed as a multizonal model by interconnecting each step of gasification (preheating, devolatilization, combustion, gasification, quench) according to the reactor configuration, that is in entrained flow reactor. The model removes the hypothesis of equilibrium by introducing the kinetics of all steps and solves the heat balance by relating the gasification temperature to the operating conditions. The model allows to predict the syngas composition as well as quantity the heat recovery (for calculating the plant efficiency), 'byproducts', and residual char. Finally, in view of future works, the development of a 'gasifier model' instead of a 'gasification model' will allow different reactor configurations to be compared.

01 COAL, LIGNITE, AND PEAT↗

Reacting CO 2 with Light Alkanes to Value-Added Products

Catalytic conversion of anthropogenic carbon dioxide (CO 2 ) into value-added products is a promising strategy to mitigate global carbon emissions. Concurrently, the shale gas revolution has provided an abundant supply of light alkanes (methane, ethane, propane, and butane), presenting a unique opportunity to employ these underutilized hydrocarbons as an effective, low-cost hydrogen source for CO 2 reduction. In this Perspective, we summarize past efforts, current state, and future opportunities for reacting CO 2 with light alkanes to generate a diverse range of value-added products. Compared with direct alkane conversion, the introduction of CO 2 fundamentally alters reaction thermodynamics and kinetics, enabling selective C–H and C–C bond activation while suppressing catalyst deactivation from coke formation. Building on decades of research in dry reforming and CO 2 -assisted dehydrogenation, recent advances in catalyst design have enabled CO 2 -assisted dehydrogenation processes that approach chemical equilibrium for the selective production of olefins and syngas. Importantly, advances in catalyst design and reactor engineering have further expanded the product scope beyond gas-phase (syngas and olefins) to include liquid-phase (oxygenates and aromatics), and solid-phase products (carbon nanomaterials). We highlight key catalyst design principles for controlling reaction pathways and discuss major challenges and opportunities in developing selective and versatile platforms for the simultaneous upgrading of CO 2 and light alkanes.

CO2↗

Tuning the activity and selectivity of electroreduction of CO 2 to synthesis gas using bimetallic catalysts

The electrochemical carbon dioxide reduction reaction to syngas with controlled CO/H 2 ratios has been studied on Pd-based bimetallic hydrides using a combination of in situ characterization and density functional theory calculations. When compared with pure Pd hydride, the bimetallic Pd hydride formation occurs at more negative potentials for Pd-Ag, Pd-Cu, and Pd-Ni. Theoretical calculations show that the choice of the second metal has a more significant effect on the adsorption strength of *H than *HOCO, with the free energies between these two key intermediates (i.e., ΔG(*H)–ΔG(*HOCO)) correlating well with the carbon dioxide reduction reaction activity and selectivity observed in the experiments, and thus can be used as a descriptor to search for other bimetallic catalysts. The results also demonstrate the possibility of alloying Pd with non-precious transition metals to promote the electrochemical conversion of CO 2 to syngas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interconnected nanoconfining pore networks enhance catalyst CO 2 interaction in electrified reactive capture

Systems that sequentially capture and upgrade CO 2 from air to fuels/fuel-intermediates, such as syngas and ethylene, rely on an energy-intensive CO 2 release process. Electrified reactive capture systems transform CO 2 obtained directly from carbonate capture liquid into products. Previous reactive capture systems show a decline in Faradaic efficiencies (FE) at current densities above 200 mA/cm 2 . Here we show the chemical origins of this problem, finding that prior electrocatalyst designs failed to arrest, activate, and reduce in situ-generated CO 2 (i-CO 2 ) before it traversed the catalyst layer and entered the tailgas stream. We develop a templated synthesis to define pore structures and the sites of Ni single atoms, and find that carbon-nitrogen-based nanopores are effective in accumulating i-CO 2 via short-range, non-electrostatic interactions between CO 2 molecules and the nanochannel walls. These interactions confine and enrich i-CO 2 within the pores, enhancing its binding and activation. We report as a result carbonate electrolysis at 300 mA/cm 2 with FE to CO of 50% ± 3%, and with <1% CO 2 in the tailgas outlet stream. This corresponds to a projected energy efficiency (EE) to 2:1 syngas of 46% at 300 mA/cm 2 when H 2 is added using a water electrolyzer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of Reduction Process of SnO 2 by CH 4 for Efficient Sn Recovery

We design a novel method for the CH 4 reduction of SnO 2 for the efficient recovery of Sn from SnO 2 through a study combining theory and experiment. The atomic-level process of CH 4 -SnO 2 interaction and temperature-dependent reduction behavior of SnO 2 were studied with a combination of a multi-scale computational method of thermodynamic simulations and density functional theory (DFT) calculations. We found that CH 4 was a highly efficient and a versatile reducing agent, as the total reducing power of CH 4 originates from the carbon and hydrogen of CH 4 , which sequentially reduce SnO 2 . Moreover, as a result of the CH 4 reduction of SnO 2 , a mixture of CO and H 2 was produced as a gas-phase product (syngas). The relative molar ratio of the produced gas-phase product was controllable by the reduction temperature and the amount of supplied CH 4 . The laboratory-scale experimental study confirmed that CH 4 actively reduces SnO 2 , producing 99.34% high-purity Sn and H 2 and CO. Our results present a novel method for an efficient, green, and economical recycling strategy for Sn with economic value added that is held by the co-produced clean energy source (syngas).

Science & Technology - Other Topics↗

CO 2 fixation into carbon nanofibres using electrochemical–thermochemical tandem catalysis

Carbon dioxide (CO 2 ) fixation into value-added solid carbon such as carbon nanofibres (CNF) for longer-term storage represents a promising avenue for achieving net-negative carbon emissions. However, directly converting CO 2 to CNF via thermocatalytic approaches faces thermodynamic constraints, while electrocatalytic methods typically lead to amorphous carbon with limited yields or require energy-intensive conditions (>720 °C). Here, we present an electrocatalytic-thermocatalytic tandem strategy for CNF production, which circumvents the aforementioned thermodynamic limitations by integrating the co-electrolysis of CO 2 and water into syngas (CO and H 2 ) with a subsequent thermochemical process at relatively mild conditions (370-450 °C, 1 atm), yielding CNF at a high production rate (average 2.5 g carbon g metals -1 h -1 ). Further, the optimal coordinated actions of FeCo alloy and extra metallic Co were ascertained to enhance the dissociative activation of syngas and favour the carbon-carbon bond formation to produce CNF. This tandem strategy opens a door to leverage renewable energy for decarbonizing CO 2 into valuable solid carbon products while producing renewable H 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Biogas sequestration to carbon nanofibers via tandem catalytic strategies

Upgrading decentralized biogas represents a sustainable route to produce valuable products while mitigating two potent greenhouse gases, namely, methane (CH 4 ) and carbon dioxide (CO 2 ). Conventional dry reforming of CH 4 with CO 2 yields syngas with low H 2 /CO ratios (≤1) and requires high temperatures (>800 °C) to overcome equilibrium constraints and abate coke deposition, which limits commercial implementation. Here we demonstrate the conversion of biogas into value-added carbon nanofibers via reaction integration in tandem reactors, while reducing the reaction temperature, shifting equilibrium limits and yielding H 2 -enriched syngas (H 2 /CO = 2–3) as a byproduct. Experimental and theoretical insights reveal that potassium (K) modification enhances carbon nanofiber formation due to synergistic effects via a balanced interplay between KO x -induced cobalt facets and cobalt carbide species. In conclusion, the energy cost and CO 2 footprint analyses highlight the potential advantages of tandem processes for the sustainable upgrading of biogas into valuable solid carbon products.

09 BIOMASS FUELS↗

Mechanistic study of dry reforming of ethane by CO 2 on a bimetallic PtNi(111) model surface

Here, we report that ethane (CH 3 CH 3 ), one of the primary components of shale gas, is an attractive candidate for the production of syngas (CO + H 2 ) and ethylene (CH 2 CH 2 ) via the selective C–C and C–H bond cleavage, respectively. Understanding the origin of the selective conversion is essential to the design of a good catalyst for CH 3 CH 3 activation. Herein, we combined density functional theory (DFT) calculations with kinetic Monte Carlo (KMC) simulations to shed light on the mechanism of the oxidative C–H and C–C bond cleavage of CH 3 CH 3 on a PtNi(111) model catalyst using CO 2 as an oxidant, where the estimated selectivity is in good agreement with the experimental results on PtNi nanoparticles supported on CeO 2 . Our calculations show that PtNi is selective to CO via direct CO 2 dissociation and the oxidative C–C bond scission of CH 3 CH 3 via the oxygenated (*C 2 H y O) intermediates. By comparison the CH 2 CH 2 selectivity via the selective C–H bond scission of *CH 3 CH 3 is much lower. Lastly, the kinetic analysis suggests that the selectivity of PtNi toward syngas can be enhanced by facilitating the formation of key *C 2 H y O intermediates, while the selectivity toward CH 2 CH 2 is promoted mainly by accelerating the C–H bond scission of *CH 3 CH 2 to produce *CH 2 CH 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conversion of landfill gas to liquid fuels through a TriFTS (tri-reforming and Fischer–Tropsch synthesis) process: a feasibility study

Biogas produced in landfills contains large amounts of methane (a potent greenhouse gas) and hence requires collection and treatment according to EPA regulations. Tri-reforming of such biogas (CH 4 + CO 2 ) is a combination of dry reforming, steam reforming, and partial oxidation to produce syngas (CO + H 2 ). This syngas can be converted to liquid hydrocarbons using Fischer–Tropsch Synthesis (FTS). A novel technology of combining tri-reforming and FTS (TriFTS) is proposed and utilized here to convert landfill gas (LFG) to high value added liquid hydrocarbon fuels such as gasoline, diesel, and jet fuel. This article explores the feasibility of TriFTS from an experimental and process economics point of view. Landfill gas collected from a local landfill was used in this study. After removing contaminant gases such as H 2 S and NH 3 via condensation and adsorption, NiMg/Ce 0.6 Zr 0.4 O 2 pellets were used in a tri-reforming reactor to produce H 2 and CO in a ratio suitable for FTS. The conversions of CH 4 and CO 2 were 99% and 60%, respectively. The H 2 /CO molar ratio was 1.7. In the FTS section, a Co/SiO 2 eggshell catalyst was used to synthesize liquid hydrocarbon with high selectivity for middle distillate cuts. The CO conversion in FTS was 71% and the liquid hydrocarbon product was similar to that of low sulfur diesel. The experimental results were used to conduct a preliminary economic analysis of a commercial scale TriFTS process. The results indicate that 45% of the energy contained in the LFG can be recovered in the liquid fuel generated, with the rest going to meet the energy demands of the conversion process including heat losses. The breakeven cost of diesel fuel produced was estimated as $3.24 per gal but reduces to 2.71 per gal if the LFG is assumed to be free of cost as would be the case for landfill operators. Additional renewable fuel credits will make the process even more economically attractive. This study suggests that conversion of LFG to liquid fuels is a promising new technology ripe for commercialization.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Biomass gasification for liquid fuel production

In our old fix-bed autothermal gasifier we tested wood chips and wood pellets. We make experiments for Czech company producing agro pellets - pellets made from agricultural waste and fastrenewable natural resources. We tested pellets from wheat and rice straw and hay. These materials can be very perspective, because they dońt compete with food production, they were formed in sufficient quantity and in the place of their treatment. New installation is composed of allothermal biomass fixed bed gasifier with conditioning and using produced syngas for Fischer - Tropsch synthesis. As a gasifying agent will be used steam. Gas purification will have two parts - separation of dust particles using a hot filter and dolomite reactor for decomposition of tars. In next steps, gas will be cooled, compressed and removed of sulphur and chlorine compounds and carbon dioxide. This syngas will be used for liquid fuel synthesis.

09 BIOMASS FUELS↗

Development of a microwave-assisted downdraft moving-bed gasifier for continuous processing of lignite and biomass chars

This research illustrates a microwave-assisted downdraft moving-bed gasifier for the first time. Such design enables continuous solid gasification process. An adjustable auger was applied to control the solid removal rate and the gas-solid interaction time. Both lignite and biomass chars were investigated to determine the capability of the current system for low-tar feedstocks with different densities. Here, the presented reactor design was able to operate continuously for 3 hours and 20 minutes under 700 ℃ and atmospheric pressure, with air as the gasifying agent. For yellow pine char, the processing rate could reach 34.1 grams per hour with decent syngas production. The downdraft moving-bed design shows better cold gas and syngas production efficiencies compared to the common fixed-bed design, due to controllable residence time and more homogeneous microwave heating. The limitations of the current design and the direction of novel microwave-assisted chemical reactor design were discussed. This novel reactor design provides a way to improve the efficiency of microwave-assisted gasification process and shows its potential to be incorporated into other established chemical reaction processes as a modular add-on.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a 300 MWe Utility Scale Oxy-Fuel sCO2 Turbine

A 300 MWe direct-fired supercritical carbon dioxide (sCO2) oxy-fuel turbine is being developed that will burn natural gas-fired, coal syngas and even hydrogen mixtures capable of 1,150ºC turbine inlet temperature at 300 bar. This design will significantly improve the state-of-the-art for thermal efficiency and results in a high-pressure stream of CO2 with 98%+ carbon capture, making the power plant near emission-free and more efficient than Natural Gas Combined Cycle (NGCC) plants with carbon capture. This power plant will be capable of burning coal through gasification and cleanup of the synthesis gas (syngas). sCO2 power cycles are a transformational technology for the energy industry, providing higher efficiency heat source energy conversion for conventional and alternative energy sources. This novel cycle significantly reduces capital costs because of smaller equipment footprints, design modularity, and allows for rapid cyclic load and source following to balance solar and wind energy power swings. Oxy-fuel sCO2 cycles take these advantages even further, utilizing higher firing temperatures, improved efficiency, and simpler carbon capture strategies. This turbine will require cooled turbine nozzles and blades as well as advanced thermal management systems to accommodate these high temperatures. The cooled blade heat transfer correlations required new test programs at higher Reynolds number than air-breathing gas turbines for impingement, serpentine, and pin-fin regions. Novel blade optimization was performed to maximize aerodynamic efficiency, while minimizing cooling flows. A turbine layout was generated utilizing individual combustor cans with cooled liners feeding into a 6-stage axial flow turbine with cooled stator nozzles and turbine blades. The case design and thermal management preliminary design will be described.

Moore, Jeffrey↗

Investigating realistic anode off-gas combustion in SOFC/ICE hybrid systems: mini review and experimental evaluation

Solid oxide fuel cells (SOFCs) have been deployed in hybrid decentralized energy systems, in which they are directly coupled to internal combustion engines (ICEs). Prior research indicated that the anode tailgas exiting the SOFC stack should be additionally exploited due to its high energy value, with typical ICE operation favoring hybridization due to matching thermodynamic conditions during operation. Consequently, extensive research has been performed, in which engines are positioned downstream the SOFC subsystem, operating in several modes of combustion, with the most prevalent being homogeneous compression ignition (HCCI) and spark ignition (SI). Experiments were performed in a 3-cylinder ICE operating in the latter modus operandi, where the anode tailgas was assimilated by mixing syngas (H 2 : 33.9%, CO: 15.6%, CO 2 : 50.5%) with three different water vapor flowrates in the engine’s intake. While increased vapor content significantly undermined engine performance, brake thermal efficiency (BTE) surpassed 34% in the best case scenario, which outperformed the majority of engines operating under similar operating conditions, as determined from the conducted literature review. Nevertheless, the best performing application was identified operating under HCCI, in which diesel reformates assimilating SOFC anode tailgas, fueled a heavy duty ICE (17:1), and gross indicated thermal efficiency ([Formula: see text]) of 48.8% was achieved, with the same engine exhibiting identical performance when operating in reactivity-controlled compression ignition (RCCI). Overall, emissions in terms of NO x and CO were minimal, especially in SI engines, while unburned hydrocarbons (UHC) were non-existent due to the absence of hydrocarbons in the assessed reformates.

Engineering↗