Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SULFURIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Orbiter cloud photopolarimeter investigation

Polarization measurements by the orbiter cloud photopolarimeter indicate the presence of a planet-wide layer of submicrometer aerosols of substantial visible optical thickness, of the order of 0.05 to 0.01, in the lower stratosphere well above the main visible sulfuric acid cloud layer. Cloud pattern characteristics found by Mariner 10 and by Pioneer are compared. Planetary scale markings, polar region clouds, and cellular features are considered.

Travis, L. D.↗
NASA NTRS1979

Venus lower atmospheric composition - Analysis by gas chromatography

The first gas chromatographic analysis of the lower atmosphere of Venus is reported. Three atmospheric samples were analyzed. The third of these samples showed carbon dioxide (96.4 percent), molecular nitrogen (3.41 percent), water vapor (0.135 percent), molecular oxygen (69.3 ppm), argon (18.6 ppm), neon (4.31 ppm), and sulfur dioxide (186 ppm). The amounts of water vapor and sulfur dioxide detected are roughly compatible with the requirements of greenhouse models of the high surface temperature of Venus. The large positive gradient of sulfur dioxide, molecular oxygen, and water vapor from the cloud tops to their bottoms, as implied by Earth-based observations and these results, gives added support for the presence of major quantities of aqueous sulfuric acid in the clouds. A comparison of the inventory of inert gases found in the atmospheres of Venus, Earth, and Mars suggests that these components are due to outgassing from the planetary interiors.

Oyama, V. I.↗
NASA NTRS1979

COS in the stratosphere

Carbonyl sulfide (COS) has been detected in the stratosphere, and mixing ratio measurements are reported for altitudes of 15.2 to 31.2 km. A large volume, cryogenic sampling system mounted on board a U-2 aircraft has been used for lower stratosphere measurements and a balloon platform for measurement at 31.2 km. These observations and measurements strongly support the concept that stratospheric COS is an important precursor in the formation of sulfuric acid aerosols.

Inn, E. C. Y.↗
NASA NTRS1979

The 12- to 20-micron spectrum of Venus - Implications for temperature and cloud structure

The spectrum of Venus was measured between approximately 500 and 800 kaysers (12 to 20 microns) at a resolution of 3.12 kaysers from the NASA C141 G. P. Kuiper Airborne Observatory on 22 and 24 February 1977. The spectrum clearly shows the detailed structure of CO2 absorption in the vicinity of the nu-2 fundamental band at 667 kaysers. In addition, details of model fitting demonstrate the possibility for a cold and thin haze of sulfuric acid droplets along with an optically opaque cloud top near 250 K. Such clouds represent major differences from other H2SO4 main cloud deck models in the recent literature and may be indicative of changes in the vertical distribution of aerosols on a global scale. The temperatures retrieved for pressures at or below 10 mbar are largely independent of the cloud model assumed and they are some 16 to 20 K warmer than the 1972 NASA model. All retrieved temperatures lie within the range of Mariner 5 and Mariner 10 radio occultation inversion results.

Aumann, H. H.↗
NASA NTRS1979

Wavelength dependence of polarization. XXXIV - Observations of Venus

Polarimetric observations of linear polarization on Venus are presented. The observations, which cover nine small disk areas as well as the whole disk, were made with seven filters between 0.3 and 1 micron and also with three filters in the range from 1.2 to 2.2 microns. A polarization wavelength dependence is determined which appears to confirm Landau's (1975) discovery of a steep rise in polarization near 3 microns. The dark UV markings on Venus are shown to be regions of more positive UV polarization and are interpreted as a general feature of a gaseous atmosphere in which sulfuric acid droplets are suspended.

Gehrels, T.↗
NASA NTRS1979

The ultraviolet markings on Venus - An analysis of the Venera 9 data

The results of Venera 9 measurements of the emergent intensity from the cloud tops of Venus are surveyed. It is reported that these radiance distributions at 3500 A contain information on the vertical and horizontal structure of the clouds and show the effects of the small and large scale ultra violet markings. Attention is given to model calculations with a Mie phase function for 1.05 micron sulfuric acid aerosols which indicate that the clouds have a layered structure. It is stressed that large-scale horizontal inhomogeneities (in excess of 1000 km) must be considered to supplement any analysis based on a horizontally homogeneous model. It is shown that the shape of the observed radiance distributions is affected by the ultraviolet 'Y' feature and the equatorial band.

Lestrade, J. P.↗
NASA NTRS1978

The chemistry of Venus' atmosphere

A model for the Venus atmosphere involving photochemistry of oxygen, hydrogen, chlorine and sulfur species is presented. Sulfur reaction schemes and hydrogen and chlorine reaction schemes were included. The impact of sulfur on the oxygen budget and the subsequent production of H2SO4 molecules for the Venus cloud deck were explored. A major new reaction scheme for production of H2SO4 molecules involving sulfur and oxygen chemistry was established shown to dominate over the odd hydrogen scheme proposed earlier. The efficiency of the scheme in formation of H2SO4 is only about 50%, with the remaining sulfur residing in SO2 molecules. The calculated downward flux of H2SO4 may be sufficient to maintain a steady state sulfuric acid cloud if the resident time of H2SO4 droplets in the cloud is as long as a few years. If however, the resident time is half a year or shorter, additional chemistry capable of more efficient conversion of SO2 to SO3 is required.

Sze, N. D.↗
NASA NTRS1979

Imaging and polarimetry with the Pioneer Venus Orbiter Cloud Photopolarimeter

The objective of the Orbiter Cloud Photopolarimeter (OCPP) on board the Pioneer Venus Orbiter spacecraft is twofold: (1) to determine the physical properties, vertical and horizontal distribution and the temporal variability of the haze and cloud aerosols on Venus; and (2) to record in images made in the near ultraviolet the varying cloud morphology and the short- and long-term character of the apparent cloud motions. Early images exhibit numerous cloud features and apparent circulation patterns similar to those observed by Mariner 10 in 1974. Features of the polar regions are identified. Polarimetry measurements indicate that the main visible cloud layer of 1-micron-radius sulfuric acid droplets is covered at least in the morning terminator region with a thin haze layer consisting of submicron-size particles. The OCPP performance appears to be excellent.

Travis, L. D.↗
NASA NTRS1980

Improved ceramic heat exchanger materials

The development and evaluation of materials for potential application as heat exchanger structures in automotive gas turbine engines is discussed. Test specimens in the form of small monolithic bars were evaluated for thermal expansion and dimensional stability before and after exposure to sea salt and sulfuric acid, followed by short and long term cycling at temperatures up to 1200 C. The material finally selected, GE-7808, consists of the oxides, ZrO2-MgO-Al2O3-S1O2, and is described generically as ZrMAS. The original version was based on a commercially available cordierite (MAS) frit. However, a clay/talc mixture was demonstrated to be a satisfactory very low cost source of the cordierite (MAS) phase. Several full size honeycomb regenerator cores, about 10.2 cm thick and 55 cm diameter were fabricated from both the frit and mineral versions of GE-7808. The honeycomb cells in these cores had rectangular dimensions of about 0.5 mm x 2.5 mm and a wall thickness of approximately 0.2 mm. The test data show that GE-7808 is significantly more stable at 1100 C in the presence of sodium than the aluminosilicate reference materials. In addition, thermal exposure up to 1100 C, with and without sodium present, results in essentially no change in thermal expansion of GE-7808.

Rauch, H. W.↗
NASA NTRS1980

Anti-reflection coatings on large area glass sheets

Antireflective coatings which may be suitable for use on the covers of photovoltaic solar modules can be easily produced by a dipping process. The coatings are applied to glass by drawing sheets of glass vertically out of dilute aqueous sodium silicate solutions at a constant speed, allowing the adherent liquid film to dry, then exposing the dried film to concentrated sulfuric acid, followed by a water rinse and dry. The process produces coatings of good optical performance (96.7 percent peak transmission at 0.540 mu M wavelength) combined with excellent stain and soil resistance, and good resistance to abrasion. The process is reproduceable and easily controlled.

Pastirik, E.↗
NASA NTRS1981

Design, fabrication, and bench testing of a solar chemical receiver

Solar thermal energy can be effectively collected, transported, stored, and utilized by means of a chemical storage and transport system employing the reversible SO2 oxidation reaction. A solar chemical receiver for SO3 thermal decomposition to SO2 and oxygen was analyzed. Bench tests of a ten foot section of a receiver module were conducted with dissociated sulfuric acid (SO3 and H2O) in an electrical furnace. Measured percent conversion of SO3 was 85% of the equilibrium value. Methods were developed to fabricate and assemble a complete receiver module. These methods included applying an aluminide coating to certain exposed surfaces, assembling concentric tubes with a wire spacer, applying a platinum catalyst to the tubing wall, and coiling the entire assembly into the desired configuration.

Summers, W. A.↗
NASA NTRS1976

Lidar measurements of the post-fuego stratospheric aerosol

Fifteen lidar observations of the stratospheric aerosol were made between February and November 1975. All observations revealed the greatly increased particulate backscattering that followed the eruption of the volcano Fuego in October 1974. Vertical structure consisted initially of multiple layers, which later merged to form a single, broader peak. Essentially all of the increased scattering was confined to altitudes below 20 km. Hence, aerosol layer centroids in 1975 were typically several km below their altitude prior to the eruption. Radiative and thermal consequences of the measured post-Fuego layer were computed using several recently published models. The models predict a temperature increase of several K at the altitude of the layer, caused by the infrared absorption bands of the sulfuric acid particles. The surface temperature decrease predicted by the models is considerably smaller than 1 K, partly because of the small optical thickness of the volcanic layer, and partly because of its short residence time relative to the earth-ocean thermal response time.

Russell, P. B.↗
NASA NTRS1981

Implications of stratospheric aerosol measurements for models of aerosol formation and evolution

Calculations of the distribution of stratospheric sulfur gases and of stratospheric aerosols are compared with measurements obtained in Alaska during July 1979. Generally, the measurements are reasonably consistent with the model results. COS is the major sulfur-bearing gas in the stratosphere while CS2 plays a lesser role in the formation of sulfate aerosols. Ammonia, which earlier measurements suggested was a major aerosol constituent, is found to be a contaminant, so models without ammonia chemistry may be justified. The model and the measurements suggest that stratospheric sulfuric acid aerosols nucleate just above the tropopause, but they are older and have grown to larger sizes at higher altitudes.

Toon, O. B.↗
NASA NTRS1980

The structure of the clouds of Venus - Results of the Pioneer Venus nephelometer experiment

The nephelometer measurements by the four Pioneer Venus probes reveal an upper haze area in the vertical cloud structure with several less clearly delineated layers in the main cloud bank. Concentrated sulfuric acid is the main component of the majority of the particulate matter in the clouds; the near UV radiation is absorbed by the clouds. The particles ejected from the planet surface are in the 10 to 100 micron range.

Ragent, B.↗
NASA NTRS1981

The formation and growth of sulfate aerosols in the stratosphere

The critical compositions, critical radii, and nucleation rates of sulfuric acid droplets formed through homogeneous heteromolecular nucleation process in the stratosphere under a variety of ambient conditions are calculated. Results are plotted as a function of H2SO4 concentration and H2O concentration so that characteristics of sulfate aerosols can be quickly estimated whenever environmental conditions are known. The effect of the uncertainty in the saturated vapor pressure of H2SO4 on the estimated properties of sulfate aerosols is elucidated. Plottings are presented that illustrate the relative importance of new particle formation by homogeneous nucleation vs growth by heteromolecular condensation on pre-existing nuclei in the stratosphere. The effects of ambient conditions, such as the concentrations of H2SO4 and H2O, the average stratospheric particle radius, and the number concentration of pre-existing nuclei on the relative importance of these two competing processes are discussed.

Yue, G. K.↗
NASA NTRS1981

The microwave absorption of SO2 in the Venus atmosphere

Sulfur dioxide has a strong and complex rotational spectrum in the microwave and far infrared regions. The microwave absorption due to SO2 in a CO2 mixture is calculated for conditions applicable to the Venus atmosphere. It is shown that at the concentrations detected by Pioneer-Venus in situ measurements, SO2 may be expected to contribute significantly to the microwave opacity of the Venus atmosphere. In particular, SO2 might provide the major source of opacity in the atmospheric region immediately below the main sulfuric acid cloud deck. The spectrum is largely nonresonant at the pressures where SO2 is expected to occur, however.

Janssen, M. A.↗
NASA NTRS1980

Analysis and interpretation of lidar observations of the stratospheric aerosol

Data obtained with a 48 in. telescope lidar system are compared with results obtained using a one-dimensional stratospheric aerosol model to analyze various microphysical processes influencing the formation of this aerosol. Special attention is given to the following problems: (1) how lidar data can help determine the composition of the aerosol particles and (2) how the layer corresponds to temperature profile variations. The lidar record during the period 1974 to 1979 shows a considerable decrease of the peak value of the backscatter ratio. Seasonal variations in the aerosol layer and a gradual decrease in stratospheric loading are observed. The aerosol model simulates a background stratospheric aerosol layer, and it predicts stratospheric aerosol concentrations and compositions. Numerical experiments are carried out by using the model and by comparing the theoretical results with the experimentally obtained lidar record. Comparisons show that the backscatter profile is consistent with the composition when the particles are sulfuric acid and water; it is not consistent with an ammonium sulfate composition. It is shown that the backscatter ratio is not sensitive to the composition or stratospheric loading of condensation nuclei such as meteoritic debris.

Hamill, P.↗
NASA NTRS1981

Synthesis of polyformals

Formals of CH2OH(CHOH) sub n CH2OH polyols (n = 2 to 4) are prepared in less than 15 minutes by heating to about 125 C, a mixture of e.g. sorbitol and paraformaldehyde in slight excess (5 to 10%), in the presence of e.g. sulfuric acid in catalytic quantities. Elution with methanol and filtration yield the pure solid cyclic triformal. The process can be carried in stages, using almost stoichiometric quantities of paraformaldehyde, but without any change in overall heating time.

Poshkus, A. C.↗