Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRENGTH CALCULATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

The structure of the heliospheric current sheet - 1978-1982

Continuing the study near solar minimum in 1976-1977 (Hoeksema et al., 1982), the configuration of the heliospheric magnetic field for the period 1976-1982 is calculated using a potential field model. Particular attention is given to the structure during the rising phase, maximum, and early decline of sunspot cycle 21, from 1978 to 1982. Four warps in the current sheet (the boundary between interplanetary magnetic field toward and away from the sun) are seen early in this interval; these give rise to a four-sector structure in the interplanetary magnetic field observed at earth. It is noted that the location of the current sheet changes slowly and extends to a heliographic latitude of approximately 50 deg. The strength of the polar field correction throughout this period is determined and included in the model calculations. The lower latitude magnetic fields become much stronger as the polar fields weaken and reverse polarity near maximum, decreasing the effect of the polar field correction.

Hoeksema, J. T.↗

Photoionization Calculations of the Radiation Force Due To Spectral Lines in AGNs

One of the main mechanisms that could drive mass outflows in active galactic nuclei (AGNs) is radiation pressure due to spectral lines. Although straightforward to understand, the actual magnitude of the radiation force is challenging to compute because the force depends on the physical conditions in the gas, as well as the strength, spectral energy distribution (SED), and geometry of the radiation field. We present results from our photoionization and radiation transfer calculations of the force multiplier, M(ξ, t), using the same radiation field to compute the gas photoionization and thermal balance. We assume low gas density (n = 104 per cu.cm) and column density (N ≤ 1017 per sq.cm), a Boltzmann distribution for the level populations, and the Sobolev approximation. Here, we describe results for two SEDs corresponding to an unobscured and obscured AGN in NGC 5548. Our main results are the following: (1) although M(ξ, t) starts to decrease with ξ for ξ gsim 1 as shown by others, this decrease in our calculations is relatively gradual and could be nonmonotonic as M(ξ, t) can increase by a factor of a few for ξ ≈ 10–1000; (2) at these same ξ for which the multiplier is higher than in previous calculations, the gas is thermally unstable by the isobaric criterion; (3) non-local thermodynamic equilibrium effects reduce M(t, ξ) by over two orders of magnitude for ξ gsim 100. The dynamical consequence of result (1) is that line driving can be important for ξ as high as 1000 when the LTE approximation holds, while result (2) provides a natural cloud formation mechanism that may account for the existence of narrow line regions. Result (3) suggests that line driving may not be important for ξ gsim 100 in tenuous plasma.

Dannen, Randall C.↗

Synchrotron radiation with radiation reaction

A rigorous discussion is presented of the classical motion of a relativistic electron in a magnetic field and the resulting electromagnetic radiation when radiation reaction is important. In particular, for an electron injected with initial energy gamma(0), a systematic perturbative solution to the Lorentz-Dirac equation of motion is developed for field strengths satisfying gamma(0) B much less than 6 x 10 to the 15th G. A particularly accurate solution to the electron orbital motion in this regime is found and it is demonstrated how lowest-order corrections can be calculated. It is shown that the total energy-loss rate corresponds to what would be found using the exact Larmor power formula without including radiation reaction. Provided that the particle energy and field strength satisfy the same contraint, it is explicitly demonstrated that the intuitive prescription for calculating the time-integrated radiation spectrum described above is correct.

Nelson, Robert W.↗

Monolithic ceramic analysis using the SCARE program

The Structural Ceramics Analysis and Reliability Evaluation (SCARE) computer program calculates the fast fracture reliability of monolithic ceramic components. The code is a post-processor to the MSC/NASTRAN general purpose finite element program. The SCARE program automatically accepts the MSC/NASTRAN output necessary to compute reliability. This includes element stresses, temperatures, volumes, and areas. The SCARE program computes two-parameter Weibull strength distributions from input fracture data for both volume and surface flaws. The distributions can then be used to calculate the reliability of geometrically complex components subjected to multiaxial stress states. Several fracture criteria and flaw types are available for selection by the user, including out-of-plane crack extension theories. The theoretical basis for the reliability calculations was proposed by Batdorf. These models combine linear elastic fracture mechanics (LEFM) with Weibull statistics to provide a mechanistic failure criterion. Other fracture theories included in SCARE are the normal stress averaging technique and the principle of independent action. The objective of this presentation is to summarize these theories, including their limitations and advantages, and to provide a general description of the SCARE program, along with example problems.

Manderscheid, Jane M.↗

Planetary gamma-ray spectroscopy

The measured intensities of certain gamma rays of specific energies escaping from a planetary surface can be used to determine the abundances of a number of elements. The fluxes of the more intense gamma-ray lines emitted from 32 elements were calculated using current nuclear data and existing models for the source processes. The source strengths for neutron-capture reactions were modified from those previously used. The fluxes emitted form a surface of average lunar composition are reported for 292 gamma-ray lines. These theoretical fluxes were used elsewhere to convert the data from the Apollo gamma-ray spectrometers to elemental abundances and can be used with measurements from future missions to map the concentrations of a number of elements over a planet's surface. Detection sensitivities for these elements are examined and applications of gamma-ray spectroscopy for future orbiters to Mars and other solar-system objects are discussed.

Reedy, R. C.↗

Electron impact excitation of highly charged sodium-like ions

Optical transition probabilities and electron collision strengths for Ca X, Fe XVI, Zn XX, Kr XXVI and Mo XXXII are calculated for transitions between n equal to 3 and n equal to 4 levels. The calculations neglect relativistic effects on the radial functions. A semi-empirical approach provides wave functions of the excited states; a distorted wave function without exchange is employed to obtain the excitation cross sections. The density dependence of the relative intensities of certain emission lines in the sodium isoelectronic sequence is also discussed.

Blaha, M.↗

Effect of thermal cycling on ZrO2-Y2O3 thermal barrier coatings

A study was made of the comparative life of plasma sprayed ZrO2-Y2O3 thermal barrier coatings on NiCrAlY bond coats on Rene 41 in short (4 min) and long (57 min) thermal cycles to 1040 C in a 0.3 Mach flame. Short cycles greatly reduced the life of the ceramic coating in terms of time at temperature as compared to longer cycles. Appearance of the failed coating indicated compressive failure. Failure occurred at the bond coat-ceramic coat junction. At heating rates greater than 550 kw/sq m, the calculated coating detachment stress was in the range of literature values of coating adhesive/cohesive strength. Methods are discussed for decreasing the effect of high heating rate by avoiding compressive stress.

Mcdonald, G.↗

Predicting the Strengths of Angle-Plied Laminates

Simplified convenient procedure has been developed that can be used to determine elastic and strength properties of angle-plied laminates. Method is suitable for use with pocket calculator. Consists of simple equations and graphs of ply combinations from most frequently used composites. Procedure makes use of well-known transformation equations, ply stress influence coefficients, and ply uniaxial composites including interply and intraply hybrids.

Chamis, C. C.↗

Relativistic thermal plasmas - Effects of magnetic fields

Processes and equilibria in finite, relativistic, thermal plasmas are investigated, taking into account electron-positron creation and annihilation, photon production by internal processes, and photon production by a magnetic field. Inclusion of the latter extends previous work on such plasmas. The basic relations for thermal, Comptonized synchrotron emission are analyzed, including emission and absorption without Comptonization, Comptonized thermal synchrotron emission, and the Comptonized synchrotron and bremsstrahlung luminosities. Pair equilibria are calculated, including approximations and dimensionless parameters, the pair balance equation, maximum temperatures and field strengths, and individual models and cooling curves.

Araki, S.↗

Evaluation of turbulence induced noise in coherent anti-Stokes Raman scattering

The effect of turbulence in a transonic wind tunnel on coherent anti-Stokes Raman scattering is considered. The driving pump and Stokes waves are taken to be coaxially propagating Gaussian beam waves which are focused on the Raman active medium through the turbulent boundary layer of the flow tube. The random index of refraction variations in the layer are modeled as phase perturbations of the driving waves which cause a reduction of the mean on-axis field and an increase in the mean diameter of the beams. Effective Gaussian beam parameters are developed and the radiated anti-Stokes power calculated as a function of the phase screen parameters. A significant reduction in signal strength occurs for realistic estimates of the phase screen parameter appropriate to a confined transonic flow. A method for estimating the signal degradation which could be applied to other experimental situations is presented.

Elliott, R. A.↗

Improved calculations for the C III 1907,1909 and Si III 1883,1892 electron density sensitive emission-line ratios, and a comparison with IUE observations

Atomic data are used in conjunction with the statistical equilibrium code of Dufton (1977) to calculate relative C III and Si III level populations, and hence emission-line strengths for a range of electron temperatures and densities. It is assumed that photoexcitation and deexcitaton rates are negligible in comparison with the corresponding collisional rates, that ionization to and recombination from other ionic levels are slow compared with bound-bound rates, and that all transitions are optically thin. The observed values of R1 and R2 for several planetary nebulae and a symbiotic star, measured from high-resolution spectra obtained with the IUE satellite, lead to electron densities that are compatible, and are also in good agreement with those deduced from line ratios in other species.

Keenan, F. P.↗

Research on Spectroscopy, Opacity, and Atmospheres

A web site has been set up to make the calculations accessible; (i.e., cfakus.harvard.edu) This data can also be accessed by FTP. It has all of the atomic and diatomic molecular data, tables of distribution function opacities, grids of model atmospheres, colors, fluxes, etc, programs that are ready for distribution, and most of recent papers developed during this grant. Atlases and computed spectra will be added as they are completed. New atomic and molecular calculations will be added as they are completed. The atomic programs that had been running on a Cray at the San Diego Supercomputer Center can now run on the Vaxes and Alpha. The work started with Ni and Co because there were new laboratory analyses that included isotopic and hyperfine splitting. Those calculations are described in the appended abstract for the 6th Atomic Spectroscopy and oscillator Strengths meeting in Victoria last summer. A surprising finding is that quadrupole transitions have been grossly in error because mixing with higher levels has not been included. All levels up through n=9 for Fe I and II, the spectra for which the most information is available, are now included. After Fe I and Fe II, all other spectra are "easy". ATLAS12, the opacity sampling program for computing models with arbitrary abundances, has been put on the web server. A new distribution function opacity program for workstations that replaces the one used on the Cray at the San Diego Supercomputer Center has been written. Each set of abundances would take 100 Cray hours costing $100,000.

Kurucz, Robert L.↗

Multilayer Pressure Vessel Materials Testing and Analysis

To provide NASA a comprehensive suite of materials strength, fracture toughness and crack growth rate test results for use in remaining life calculations for aging multilayer pressure vessels, Southwest Research Institute (R) (SwRI) was contracted in two phases to obtain relevant material property data from a representative vessel. This report describes Phase 1 of this effort which includes a preliminary material property assessment as well as a fractographic, fracture mechanics and fatigue crack growth analyses of an induced flaw in the outer shell of a representative multilayer vessel that was subjected to cyclic pressure test. SwRI performed this Phase 1 effort under contract to the Digital Wave Corporation in support of their contract to Jacobs ATOM for the NASA Ames Research Center.

Cardinal, Joseph W.↗

Propynal, an Interstellar Molecule with an Exceptionally Strong C ≡ C Infrared Band – Laboratory Infrared Data and Applications

Isomers with the formula C3H2O have intrigued and puzzled astronomers and astrochemists for many years, with propynal and cyclopropenone, but not propadienone, known to be interstellar. However, there is a severe lack of laboratory spectra of the solid phases of these compounds with which to investigate their interstellar chemistry. Here we present the first infrared spectra of amorphous and crystalline forms of propynal, HCC—C(O)H, at multiple temperatures. Band positions are tabulated and band strengths are derived in terms of absorption coefficients and integrated intensities. Optical constants are calculated for amorphous propynal, refractive indices are measured, and densities are estimated. Three laboratory astrochemistry applications are described, including a new spectral identification in an earlier paper. It is shown that propynal's C≡C infrared absorbance is about 30 000 per cent stronger than the corresponding feature in acetylene. This band's intensity and spectral position make it an attractive candidate for astronomical searches involving interstellar ices.

astrochemistry – ISM: molecules↗

Propynal, an Interstellar Molecule with an Exceptionally Strong C≡C Infrared Band - Laboratory Infrared Data and Applications

Isomers with the formula C3H2O have intrigued and puzzled astronomers and astrochemists for many years, with propynal and cyclopropenone, but not propadienone, known to be interstellar. However, there is a severe lack of laboratory spectra of the solid phases of these compounds with which to investigate their interstellar chemistry. Here we present the first infrared spectra of amorphous and crystalline forms of propynal, HCC-C(O)H, at multiple temperatures. Band positions are tabulated and band strengths are derived in terms of absorption coefficients and integrated intensities. Optical constants are calculated for amorphous propynal, refractive indices are measured, and densities are estimated. Three laboratory astrochemistry applications are described, including a new spectral identification in an earlier paper. It is shown that propynal's C≡C infrared absorbance is about 30,000% stronger than the corresponding feature in acetylene. This band's intensity and spectral position make it an attractive candidate for astronomical searches involving interstellar ices.

astrochemistry – ISM: molecules↗

Propynal, an Interstellar Molecule with an Exceptionally Strong C≡C Infrared Band - Laboratory Infrared Data and Applications

Isomers with the formulaC3H2Ohave intrigued and puzzled astronomers and astrochemists for many years, with propynal and cyclopropenone, but not propadienone, known to be interstellar. However, there is a severe lack of laboratory spectra of the solid phases of these compounds with which to investigate their interstellar chemistry. Here we present the first infrared spectra of amorphous and crystalline forms of propynal, HCC C(O)H, at multiple temperatures. Band positions are tabulated and band strengths are derived in terms of absorption coefficients and integrated intensities. Optical constants are calculated for amorphous propynal, refractive indices aremeasured, and densities are estimated. Three laboratory astrochemistry applications are described, including a new spectral identification in an earlier paper. It is shown that propynal’s C C infrared absorbance is about 30 000 per cent stronger than the corresponding feature in acetylene. This band’s intensity and spectral position make it an attractive candidate for astronomical searches involving interstellar ices.

astrochemistry – ISM: molecules↗

Structural analysis and sizing of stiffened, metal matrix composite panels for hypersonic vehicles

The present method for strength and stability analyses of stiffened, fiber-reinforced composite panels to be used in hypersonic vehicle structures is of great generality, and can be linked with planar finite-element analysis (FEA). Nonlinear temperature and load-dependent material data for each laminate are used to 'build-up' the stiffened panel's membrane, bending, and membrane-bending coupling stiffness terms, as well as thermal coefficients. The resulting, FEA-solved thermomechanical forces and moments are used to calculate strain at any location in the panel; this allows an effective ply-by-ply orthotropic strength analysis to be conducted, together with orthotropic instability checks for each laminated segment of the cross-section.

Collier, Craig S.↗

Method for calculating effects of a propfan on aircraft aerodynamics at subsonic speeds

A subsonic-flow panel code has been modified to handle the effects of a propeller wake. The effects of the propeller were modelled by a system of ring vortices of constant strength. Principles based on the blade element theory and the momentum theory were used to evaluate the swirl velocity and the pressure increase, across the propeller. Theoretical calculations are compared to experimental results at a Mach number of 0.50. The discrepancies between the theory and the experimental results are analysed. Suggestions for improvements to enhance the accuracy of the theoretical prediction are indicated.

Chandrasekaran, B.↗