Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STELLAR SYSTEMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Derivation Of the Occurrence Of Multiple Planets In Transit

All methods for extra-solar planet detection have their advantages and drawbacks. In photometry, for a planet to be detectable, it must pass in front of its star along the line of sight to the star. This may seem at first to be an unusual event, when in fact it has been shown to be equal to d*/D, or about 1% for planetary systems like our own (d* is the stellar diameter and D is the orbital diameter). Planetary scientists are interested in the complexities of an entire system rather than just a single planet. At first it might seem extremely unlikely that multiple planets would be detectable. But imagine having detected a planet in transit and that the relative inclinations, phi, of all the orbits is smaller than d*/D. Then, if you detect one planet, you should detect nearly all of them. However, for the solar system phi greater than d*/D, but still small. The exact derivation will be presented for the occurrence of multiple plane's in transit. A good approximation to the result is found to be given by (4/pi(phi)(d*/D(sub 2)), where D(sub 2) is the orbit of the second planet. For example if phi is 2 deg, then the probability for finding a second planet if it has an inclination less than phi will be equal to 36 d*/D(sub 2). For inner planets around solar-like stars, this turns out to be on the order of 20% of the systems detected. Extending this to three planets, such as for Venus, Earth and Mars, the probability would be 4%.

Koch, D.↗
NASA NTRS2018

The Nature of Interstellar Organics and Their Relationship to the Solar System

Carbonaceous materials are a primary compo-nent of interstellar dust, forming in the outflow of carbon stars and the diffuse interstellar me-dium (DISM). Over time, the low density DISM is swept into dense molecular clouds, the principal formation sites and repositories of most interstellar molecules. Organic com-pounds created in these clouds are the first step towards the complex materials that help to make planets habitable. Ground- and space-based telescopic observations trace interstellar organics from the diffuse to dense interstellar clouds, revealing that organic material in the diffuse ISM is predominantly hydrocarbon in nature, possessing little N or O, with the C distributed between the aromatic and aliphatic forms. A remarkable similarity between the hydrocarbons in dust in our Galaxy to that of distant galaxies, indicates that this organic component of the DISM is widespread and may be an important universal reservoir of prebiotic organic carbon. Spectroscopy of background stars seen through quiescent dust in clouds with no star formation activity re-veals that chemistry occurs early-on. Mean-while, observations of certain asteroids, com-ets, interplanetary dust particles, planets and planetary satellites present an intricate inter-weaving of preserved interstellar components and those that have been subsequently altered. The composition ofinterstellar dust grains and the evolution of dust between dense clouds (where stars and planetary systems form) and the diffuse inter-stellar medium (where stardust components are ejected), will be presented in this workshop on Carbon in the Solar System.

Intersteller Organics↗
NASA NTRS2018

HOMES: Holographic Method for Exoplanet Spectroscopy

The search for habitable exoplanets in the "neighborhood," that is within 10 parsecs (pc),invites new observational techniques, because telescopes available today have significant limitations. For example, gravitational micro-lensing is a deep field method that has little or no utility within 10 pc. Photometry of transits reduces the availability of exoplanets to a probability of approximately a 1%, and fewer than 1 out of 100 earth twins would ever be seen. For the 1% of exoplanets seen in transit, spectra of albedos cannot be taken.Even more limiting, Doppler shift studies are indirect and cannot characterize exoplanets other than by their orbits and masses through stellar radial velocity (RV). Moreover, RV by Doppler shift cannot detect planets in orbits on a plane perpendicular to our line of sight. Astrometry can be used to measure stellar orbital wobble for those exoplanetary systems in the plane perpendicular to our line of sight, as was contemplated for the cancelled NASA SIM mission 1 and rests now with ESA's GAIA2. In either case, the exoplanets detected by stellar RV or astrometry would not be directly observed, so the assumption that the three phases of water could exist does not answer a key question of habitability. Is there water on the exoplanet? Moreover, the discovery of water on an exoplanet in the habitable zone, exciting though it would be, is insufficient to determine just how habitable the exoplanet might possibly be. Like Goldilocks' porridge - there are many other ingredients beyond water alone in a life-sustaining soup.We propose a new species of optical telescope that has as one of its capabilities the high resolution spectrographic characterization of exoplanets on stars within 10 pc of the observatory. To achieve this performance specification, we propose to break with convention by taking advantage of an optical technology unknown until relatively recent times: the hologram. In this Report we show how holograms used in primary and secondary can extract spectrograms from exoplanets at distances reaching 33 light years from our solar system. We describe a notional space telescope using these novel optics that could make its observations in a space deployment scenario.

Ditto, Thomas↗
DOE OSTI2023

How the dynamical properties of globular clusters impact their $γ$-ray and X-ray emission

The X-ray and $γ$-ray emission of globular clusters (GCs) is attributed to their large fraction of compact binary systems, especially those with millisecond pulsars (MSPs). We analyse a population of 124 Galactic GCs to investigate how their dynamical properties affect the formation and evolution of compact binary systems and how this can be translated into the clusters’ observed X-ray and γ-ray emission. We use mainly Chandra X-ray Observatory and Fermi Large Area Telescope observations to achieve our goals and start by detecting 39 GCs in γ rays, seven of which are not listed in previous Fermi -LAT catalogs. Additionally, we find that the total number of X-ray sources within a GC and its γ-ray luminosity are linearly correlated with the stellar encounter rate, indicating that compact binary systems are mainly formed via close stellar encounters. We also find an unexpected rise in the number of X-ray sources for GCs with low rates of stellar encounters, suggesting that there is a dynamical threshold where the formation of X-ray sources is dominated by stellar encounters. Furthermore, we use the Heggie-Hills law to find that subsequent stellar encounters in these compact binaries will, on average, make the binaries even harder, with basically no possibility of binary ionization. Finally, we find that all GCs are point-like sources in γ rays, indicating that the MSPs are concentrated in the clusters’ cores, likely due to dynamical friction.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1973

Design and analysis of a star image motion compensator

The feasibility of designing and fabricating a small optical system to compensate for motions of a stellar field image on the focal plane of a large orbiting telescope is examined for a single-axis system. An all-reflecting two-mirror star image motion compensator maintains both a flat focal plane and image focus for one or more star images. Both theoretical and experimental evaluations show that only one adjustment is needed to aline the system since the change in focus is linearly related to the misalinements of all critical components. Results of an error analysis show that the focus error resulting from fabrication tolerances is very small compared to the adjustment capability of the system.

Romanczyk, K. C.↗
NASA NTRS2020

The Resilience of Habitable Climates Around Circumbinary Stars

Here we use a 3‐D climate system model to study the habitability of Earth‐like planets orbiting in circumbinary systems. In the most extreme cases, Earth‐like planets in circumbinary systems could experience variations in the incident stellar flux of up to ~50% on ~100‐day timescales. However, we find that Earth‐like planets, having abundant surface liquid water, are generally effective at buffering against these time‐dependent changes in the stellar irradiation due to the high thermal inertia of oceans compared with the relatively short periods of circumbinary‐driven variations in the received stellar flux. Ocean surface temperatures exhibit little to no variation in time; however, land surfaces can experience modest changes in temperature, thus exhibiting an additional mode of climate variability driven by the circumbinary variations. Still, meaningful oscillations in surface temperatures are only found for circumbinary system architectures featuring the largest physically possible amplitudes in the stellar flux variation. In the most extreme cases, an Earth‐like planet could experience circumbinary‐driven variations in the global mean land surface temperature of up to ~5 K, and variations of local daytime maximum temperatures of up to ~12 K on seasonal timescales, while the global mean ocean temperatures vary by less than ~2 K. Such seasonal temperature swings over land areas could potentially pose adaptability challenges for extant life. Still, habitable planets in circumbinary systems appear to be remarkably resilient against circumbinary‐driven climate variations and can avoid any true climate catastrophes.

Eric T Wolf↗
NASA NTRS1988

IPS guidestar selection for stellar mode (ASTRO)

This report describes how guide stars are selected for the Optical Sensor Package (OSP) for the Instrument Pointing System (IPS) when it is operating in the stellar mode on the ASTRO missions. It also describes how the objective loads are written and how the various roll angles are related; i.e., the celestial roll or position angle, the objective load roll angles, and the IPS gimbal angles. There is a brief description of how the IPS operates and its various modes of operation; i.e., IDOP, IDIN, and OSPCAL.

Mullins, Larry↗
NASA NTRS1971

Engineering aspects of the Uvicon/Celescope system.

Summary of experience with the Uvicon/Celescope system, a space-borne astronomical observatory, which has successfully obtained more than 8000 frames of television pictures in the stellar ultraviolet. Important requirements for a better system are simple operation, immunity to change in the external magnetic field, predictable temperature characteristics, longevity, a fatigue-resistant cathode, and deterioration monitoring.

Nozawa, Y.↗
NASA NTRS2003

The Kepler Mission: A Search for Terrestrial Planets - Development Status

We have embarked on a mission to detect terrestrial planets. The space mission has been optimized to search for earth-size planets (0.5 to 10 earth masses) in the habitable zone (HZ) of solar-like stars. Given this design, the mission will necessarily be capable of not only detecting Earth analogs, but a wide range of planetary types and characteristics ranging from Mercury-size objects with orbital periods of days to gas-giants in decade long orbits that have undeniable signatures even with only one transit detected. The mission is designed to survey the full range of spectral-type dwarf stars. The approach is to detect the periodic signal of transiting planets. Three or more transits of a star exceeding a combined threshold of eight sigma with a statistically consistent period, brightness change and duration provide a rigorous method of detection. From the relative brightness change the planet size can be calculated. From the period the orbital size can be calculated and its location relative to the HZ determined. Presented here are: the mission goals, the top level system design requirements derived from these goals that drive the flight system design, a number of the trades that have lead to the mission concept, expected photometric performance dependence on stellar brightness and spectral type based on the system 'noise tree' analysis. Updated estimates are presented of the numbers of detectable planets versus size, orbit, stellar spectral type and distances based on a planet frequency hypothesis. The current project schedule and organization are given.

Koch, David↗
NASA NTRS1981

On stellar wind accretion in widely separated X-ray binaries, and the nature of 4U0115+63

Widely separated, eccentric pulsating X-ray binaries are shown to be appropriate systems for studying the basic properties of stellar wind accretion. They are free from the complications encountered in closed binaries, where the optical star nearly fills its critical lobe (Avni, 1977). A framework of four observational tests was set up to study the characteristics of wind accretion, and to distinguish between different models of wind acceleration. The tests are applied to the source 4U0115+63, and the accretion process is discussed in both its quiescent states, and during its transient high luminosity outbursts. For the quiescent steady state, two wind profiles, determined from observational data, are compared (Barlow-Lohen, 1977; Castor et al., 1975). The difficulties encountered during the transient high states with respect to the possibility of stellar wind accretion are discussed.

Avni, Y.↗
DOE OSTI2026

Commissioning and operation of a real-time multi-point Thomson scattering evaluation system at Wendelstein 7-X

A real-time multi-point Thomson scattering (rtMPTS) evaluation system has recently been installed and commissioned at the Wendelstein 7-X (W7-X) stellarator during the 2024 -2025 operational phases. This system has demonstrated successful evaluation of Thomson scattered spectra on millisecond timescales. We discuss initial results from this system, consisting of a comparison of different evaluation techniques, assessment of system evaluation times, and proof-of-principle control experiments carried out with the W7-X poloidal correlation reflectometer (PCR) system. This diagnostic represents the first step towards the development of a density profile controller at W7-X, which can be leveraged to support steady-state operation.

Mohammed, Ameer [Princeton Plasma Physics Laborato↗
NASA NTRS2017

Kelt-16b: A Highly Irradiated, Ultra-Short Period Hot Jupiter Nearing Tidal Disruption

We announce the discovery of KELT-16b, a highly irradiated, ultra-short period hot Jupiter transiting the relatively bright (visual magnitude equals 11.7) star TYC 2688-1839-1/KELT-16. A global analysis of the system shows KELT-16 to be an F7V star with effective temperature equal to 6236 plus or minus 54 degrees Kelvin, log g (sub asterisk) equal to 4.253 from plus 0.031 to minus 0.036, [Fe/H] equal to minus 0.002 from plus 0.086 to minus 0.085, mass (sub asterisk) equal to 1.211 from plus 0.043 to minus 0.046 times the solar mass, and radius (sub asterisk) equal to 1.360 from plus 0.064 o minus 0.053 times the solar radius. The planet is a relatively high-mass inflated gas giant with planetary mass equal to 2.75 from plus 0.016 to minus 0.15 times Jupiter's mass, planetary radius equal to 1.415 from plus 0.084 to minus 0.067 times Jupiter's radius, density planetary rho equal to 1.20 plus or minus 0.18 grams per cubic centimeter, surface gravity, log planetary gravity equal to 3.530 from plus 0.042 to minus 0.049, and equatorial temperature equal to 2453 from plus 55 to minus 47 degrees Kelvin. The best-fitting linear ephemeris is T(sub C) equal to 22457247.24791 plus or minus 0.00019 BJD (sub TDB) and P equal to 0.9689951 plus or minus 0.0000024 day. KELT-16b joins WASP-18b, -19b, -43b, -103b, and HATS-18b as the only giant transiting planets with periodicity P less than 1 day. Its ultra-short period and high irradiation make it a benchmark target for atmospheric studies by the Hubble Space Telescope, Spitzer, and eventually the James Webb Space Telescope. For example, as a hotter, higher-mass analog of WASP-43b, KELT-16b may feature an atmospheric temperature-pressure inversion and day-to-night temperature swing extreme enough for TiO to rain out at the terminator. KELT-16b could also join WASP-43b in extending tests of the observed mass-metallicity relation of the solar system gas giants to higher masses. KELT-16b currently orbits at a mere approximately 1.7 Roche radii from its host star, and could be tidally disrupted in as little as a few times 10 (sup 5) years (for a stellar tidal quality factor of Q (sup prime) (sub asterisk) equal to 10 (sup 5). Finally, the likely existence of a widely separated bound stellar companion in the KELT-16 system makes it possible that Kozai-Lidov (KL) oscillations played a role in driving KELT-16b inward to its current precarious orbit.

Oberst, Thomas E.↗
NASA NTRS2004

MSTAR: an absolute metrology system with submicrometer accuracy

Laser metrology systems are a key component of stellar interferometers, used to monitor path lengths and dimensions internal to the instrument. Most interferometers use ‘relative’ metrology, in which the integer number of wavelengths along the path is unknown, and the measurement of length is ambiguous. Changes in the path length can be measured relative to an initial calibration point, but interruption of the metrology beam at any time requires a re- calibration of the system. iThe MSTAR sensor (Modulation Sideband Technology for Absolute Ranging) is a new system for measuring absolute distance, capable of resolving the integer cycle ambiguity of standard interferometers, and making it possible to measure distance with sub-nanometer accuracy. We describe the design of the system, show results for target distances up to 1 meter, and demonstrate how the system can be scaled to kilometer-scale distances. In recent experiments, we have used white light interferometry to augment the ‘truth’ measurements and validate the zero-point of the system. MSTAR is a general-purpose tool for conveniently measuring length with much greater accuracy than was previously possible, and has a wide range of possible applications.

Lay, Oliver↗
NASA NTRS2004

MSTAR: an absolute metrology system with submicrometer accuracy

Laser metrology systems are a key component of stellar interferometers, used to monitor path lengths and dimensions internal to the instrument. Most interferometers use ‘relative’ metrology, in which the integer number of wavelengths along the path is unknown, and the measurement of length is ambiguous. Changes in the path length can be measured relative to an initial calibration point, but interruption of the metrology beam at any time requires a re-calibration of the system. The MSTAR sensor (Modulation Sideband Technology for Absolute Ranging) is a new system for measuring absolute distance, capable of resolving the integer cycle ambiguity of standard interferometers, and making it possible to measure distance with sub-nanometer accuracy. We describe the design of the system, show results for target distances up to 1 meter, and demonstrate how the system can be scaled to kilometer-scale distances. In recent experiments, we have used white light interferometry to augment the ‘truth’ measurements and validate the zero-point of the system. MSTAR is a general-purpose tool for conveniently measuring length with much greater accuracy than was previously possible, and has a wide range of possible applications

Fetterman, Harrold R.↗
NASA NTRS2002

Optical metrology for Starlight Separated Spacecraft Stellar Interferometry Mission

We describe a high-precision inter-spacecraft metrology system designed for NASA 's StarLight mission, a space-based separated-spacecraft stellar interferometer. It consists of dual-target linear metrology, based on a heterodyne interferometer with carrier phase modulation, and angular metrology designed to sense the pointing of the laser beam and provides bearing information. The dual-target operation enables one metrology beam to sense displacement of two targets independently. We present the current design, breadboard implementation of the Metrology Subsystem in a stellar interferometer testbed and the present state of development of flight qualifiable subsystem components.

metrology stellar interferometry formation flying↗
DOE OSTI2025

The hierarchical growth of bright central galaxies and intracluster light as traced by the magnitude gap

Using a sample of 2800 galaxy clusters identified in the Dark Energy Survey across the redshift range 0.20 < z < 0.60, we characterize the hierarchical assembly of bright central galaxies (BCGs) and the surrounding intracluster light (ICL). To quantify hierarchical formation we use the stellar mass–halo mass (SMHM) relation, comparing the halo mass, estimated via the mass–richness relation, to the stellar mass within the BCG + ICL system. Moreover, we incorporate the magnitude gap (M14), the difference in brightness between the BCG (measured within 30 kpc) and fourth brightest cluster member galaxy within 0.5 $R_{200,c}$, as a third parameter in this linear relation. The inclusion of M14, which traces BCG hierarchical growth, increases the slope and decreases the intrinsic scatter, highlighting that it is a latent variable within the BCG + ICL SMHM relation. Moreover, the correlation with M14 decreases at large radii. However, the stellar light within the BCG + ICL transition region (30 –80 kpc) most strongly correlates with halo mass and has a statistically significant correlation with M14. Since the transition region and M14 are independent measurements, the transition region may grow due to the BCG’s hierarchical formation. Additionally, as M14 and ICL result from hierarchical growth, we use a stacked sample and find that clusters with large M14 values are characterized by larger ICL and BCG + ICL fractions, which illustrates that the merger processes that build the BCG stellar mass also grow the ICL. Furthermore, this may suggest that M14 combined with the ICL fraction can identify dynamically relaxed clusters.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1991

A simulation of the instrument pointing system for the Astro-1 mission

NASA has recently completed a shuttle-borne stellar ultraviolet astronomy mission known as Astro-1. A three axis instrument pointing system (IPS) was employed to accurately point the science instruments. In order to analyze the pointing control system and verify pointing performance, a simulation of the IPS was developed using the multibody dynamics software TREETOPS. The TREETOPS IPS simulation is capable of accurately modeling the multibody IPS system undergoing large angle, nonlinear motion. The simulation is documented and example cases are presented demonstrating disturbance rejection, fine pointing operations, and multiple target pointing and slewing of the IPS.

Whorton, M.↗