Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Laser ranging ground station development

The employment of ground to conduct radar range measurements of the lunar distance is discussed. The advantages of additional ground stations for this purpose are analyzed. The goals which are desirable for any new type of ranging station are: (1) full time availability of the station for laser ranging, (2) optimization for signal strength, (3) automation to the greatest extent possible, (4) the capability for blind pointing, (5) reasonable initial and modest operational costs, and (6) transportability to enhance the value of the station for geophysical purposes.

Faller, J. E.↗
NASA NTRS1975

Simultaneous acquisition of tracking data from two stations

A method and apparatus is described for obtaining simultaneous tracking data from two ground stations relative to a spacecraft, and in particular for obtaining two-way range and Doppler measurements with respect to the spacecraft using only one transponder on the spacecraft. The technique employs simultaneous transmission from two stations to produce a return signal with upper and lower sidebands resulting from the interference of the two transmissions. A transponder transmits the upper and lower sidebands centered about a carrier received by both stations. One station tracks the carrier and the other tracks a sideband aided by the carrier.

Wood, G. E.↗
NASA NTRS1974

Earth's gravity field to the eighteenth degree and geocentric coordinates for 104 stations from satellite and terrestrial data

Geodetic parameters describing the earth's gravity field and the positions of satellite-tracking stations in a geocentric reference frame have been computed. These parameters were estimated by means of a combination of five different types of data: routine and simultaneous satellite observations, observations of deep space probes, measurements of terrestrial gravity, and surface triangulation data. The combination gives better parameters than does any subset of data types. The dynamic solution used precision-reduced Baker-Nunn observations and laser range data of 25 satellites. Data from the 49-station National Oceanic and Atmospheric Administration BC-4 network, the 19-station Smithsonian Astrophysical Observatory Baker-Nunn network, and independent camera stations were employed in the geometrical solution.

Gaposchkin, E. M.↗
NASA NTRS1976

Small space station electrical power system design concepts

A small manned facility, i.e., a small space station, placed in earth orbit by the Shuttle transportation system would be a viable, cost effective addition to the basic Shuttle system to provide many opportunities for R&D programs, particularly in the area of earth applications. The small space station would have many similarities with Skylab. This paper presents design concepts for an electrical power system (EPS) for the small space station based on Skylab experience, in-house work at Marshall Space Flight Center, SEPS (Solar Electric Propulsion Stage) solar array development studies, and other studies sponsored by MSFC. The proposed EPS would be a solar array/secondary battery system. Design concepts expressed are based on maximizing system efficiency and five year operational reliability. Cost, weight, volume, and complexity considerations are inherent in the concepts presented. A small space station EPS based on these concepts would be highly efficient, reliable, and relatively inexpensive.

Jones, G. M.↗
NASA NTRS1976

An estimate of the geodetic accuracy attainable with a transportable lunar laser station

A transportable lunar laser ranging station can be expected to measure the range to the lunar corner retroreflectors from a site on the earth's surface with an uncertainty of about 3 cm. The accuracy with which that station can infer its geocentric position is influenced by many factors including the uncertainties in the pole position and rotation rate of the earth and the data loss due to weather. The results of a simplified modeling study intended to include these factors are presented in cartographic form. The modeling indicates that, assuming the successful operation of three or more widely separated fixed laser stations, the transportable station will be able to determine its relative geocentric position in all three coordinates with an accuracy comparable to the original range uncertainty.

Silverberg, E. C.↗
NASA NTRS1978

Station position results using concentrated C-band tracking of GEOS-3

Station positions for the GEOS 3 C Band tracking network were estimated using C Band and laser data taken during a two-week concentrated tracking period. The C Band stations are located primarily in the continental United States and on Western Atlantic islands. The network, however, included stations in Hawaii, in West Germany, and on Kwajalein atoll. Estimated accuracies for the recovered positions are 2 m for the continental U. S. and Atlantic sites, 5 m for Hawaii, and 10 m for Kwajalein. The dominant contributor to these uncertainties is geopotential model error. Thus, the C Band/laser data set could be used for more accurate center-of-mass positioning of a continental network of stations.

Krabill, W. B.↗
NASA NTRS1979

LS47: A DSN station location set compatible with JPL development ephemeris DE108

An updated Deep Space Network station location set, LS47, is presented which is compatible with JPL Development Ephemeris DE108. Analytic procedures for linearly correcting station spin axis and longitude estimates for an ephemeris update based on Brouwer-Clemence Set III parameters are briefly discussed. The validity of this technique is demonstrated by a comparison of a linearly corrected solution with one explicitly determined by reprocessing the data. A mission data base, including Viking 1 and 2 encounter data, is first used to obtain an updated DE96 compatible station location solution, LS46, which in turn is adjusted to form the DE108 solution, LS47. Improved station Z-heights are estimated by using available very long baseline interferometry data. Spin axis differences between LS46 and LS47 are relatively insignificant; however, the ephemeris change introduces a -0.8 x 10 to the -5 power degree rotation in the DE96 longitude ephemeris.

Ellis, J.↗
NASA NTRS1979

Orbiting Deep Space Relay Station (ODSRS). Volume 1: Requirement determination

The deep space communications requirements of the post-1985 time frame are described and the orbiting deep space relay station (ODSRS) is presented as an option for meeting these requirements. Under current conditions, the ODSRS is not yet cost competitive with Earth based stations to increase DSN telemetry performance, but has significant advantages over a ground station, and these are sufficient to maintain it as a future option. These advantages include: the ability to track a spacecraft 24 hours per day with ground stations located only in the USA; the ability to operate at higher frequencies that would be attenuated by Earth's atmosphere; and the potential for building very large structures without the constraints of Earth's gravity.

Hunter, J. A.↗
NASA NTRS1979

Interim radio spectrum surveillance station

Radio frequency interference at NASA's deep space stations has become a serious problem. A radio spectrum surveillance capability at these stations is needed to determine the sources of interference so that preventative measures can be taken. The first phase of a program to develop this capability was the development of a low-cost surveillance station now in operation at the Goldstone Space Communication Complex near Barstow, California. This interim surveillance station is described and findings from the use of this equipment are presented.

Hersey, D. R.↗
NASA NTRS1980

Deep Space Station (DSS-13) automation demonstration

The data base collected during a six month demonstration of an automated Deep Space Station (DSS 13) run unattended and remotely controlled is summarized. During this period, DSS 13 received spacecraft telemetry data from Voyager, Pioneers 10 and 11, and Helios projects. Corrective and preventive maintenance are reported by subsystem including the traditional subsystems and those subsystems added for the automation demonstration. Operations and maintenance data for a comparable manned Deep Space Station (DSS 11) are also presented for comparison. The data suggests that unattended operations may reduce maintenance manhours in addition to reducing operator manhours. Corrective maintenance for the unmanned station was about one third of the manned station, and preventive maintenance was about one half.

Remer, D. S.↗
NASA NTRS1979

Radio spectrum surveillance station

The paper presents a general and functional description of a low-cost surveillance station designed as the first phase of NASA's program to develop a radio spectrum surveillance capability for deep space stations for identifying radio frequency interference sources. The station described has identified several particular interferences and is yielding spectral signature data which, after cataloging, will serve as a library for rapid identification of frequently observed interference. Findings from the use of the station are discussed.

Hersey, D. R.↗
NASA NTRS1983

Space station needs, attributes and architectural options study. Volume 5: Cost benefits and programmatic analyses

The science, applications, commercial, U.S. national security and space operations missions that would require or be materially benefited by the availability of a permanent manned space station in low Earth orbit are considered. Space station attributes and capabilities which will be necessary to satisfy these mission requirements are identified. Emphasis is placed on the identification and validation of potential users, their requirements, and the benefits accruing to them from the existence of a space station, and the programmatic and cost implications of a space station program.

Source record↗
NASA NTRS1983

Application of a space station to communications satellites

The economic benefits of a space station relative to communications satellites are discussed in terms of technology experiments, spacecraft checkout, repair, servicing, and refurbishment (RSR), and mating an OTV with satellites for boost to GEO. The zero gravity, vacuum conditions, and atmosphere free long ranges are environmental features that can be used for testing large, flexible antennas and laser communications devices. Some resistance might be encountered to checkout in LEO due to the substantial success of launches to GEO without LEO checkout. However, new generations of larger, more complex satellites may warrant the presence of a space station to verify performance of new spacecraft. One RSR positive aspect for a space station is as a storage site for propellant, as well as for reusable OTV booster engines. Also, the space station can serve as a base for manned or unmanned repair spacecraft which will travel to GEO to fix malfunctions in geostationary satellites.

Ramler, J. R.↗
NASA NTRS1983

Autonomy issues for an operational space station

Within the last decade, both the U.S. and the Soviet space programs have taken significant preliminary steps in developing technology and systems which are appropriate for the establishment of space stations. The degree of autonomy which will be provided for the station and the role of the crew represents one of the most critical considerations. The present investigation is concerned with a review of the major autonomy issues associated with a permanent, low earth orbit, operational space station. It is shown that both operational effectiveness and crew safety issues require a relatively high degree of space station autonomy. The autonomy level should, for instance, be higher than that of the present space shuttle. Attention is given to various levels of spacecraft autonomy, system integrity, attitude determination and control, navigation and orbit maintenance, system maintenance and resupply, mission support, and implementation of autonomy.

Daly, K. C.↗
NASA NTRS1983

On-board estimation technology for space station - Current status and future developments.

Design considerations and projected solutions to on-board automated estimation techniques for advanced technology controls on a space station are described, with emphasis on the state estimator. The space station is modelled as a collection of rigid and flexible bodies connected at a finite number of hinges. The systems dynamics are characterized by angular velocities of the base body, gimbal angles, and deflections of the flexible appendages. The state estimator evolution is projected to occur in four generations, with the first being control logic in the Viking and Voyager spacecraft, the second in the Shuttle and Galileo probe, the third being large antennas and the prototype space station, the last, around the year 2000, for the actual space station. Considerations for attitude, ephemeris, shape determination, and position estimation through each generation are discussed.

Rodriguez, G.↗
NASA NTRS1983

The US space station: Potential base for a spaceborne microwave facility

Concepts for a U.S. space station were studied to achieve the full potential of the Space Shuttle and to provide a more permanent presence in space. The space station study is summarized in the following questions: Given a space station in orbit in the 1990's, how should it best be used to achieve science and applications objectives important at that time? To achieve those objectives, of what elements should the station be comprised and how should the elements be configured and equipped. These questions are addressed.

Mcconnell, D.↗
NASA NTRS1983

Space station needs, attributes and architectural options study. Volume 4: Architectural options, subsystems, technology and programmatics

Space station architectural options, habitability considerations and subsystem analyses, technology, and programmatics are reviewed. The methodology employed for conceiving and defining space station concepts is presented. As a result of this approach, architectures were conceived and along with their supporting rationale are described within this portion of the report. Habitability consideration and subsystem analyses describe the human factors associated with space station operations and includes subsections covering (1) data management, (2) communications and tracking, (3) environmental control and life support, (4) manipulator systems, (5) resupply, (6) pointing, (7) thermal management and (8) interface standardization. A consolidated matrix of subsystems technology issues as related to meeting the mission needs for a 1990's era space station is presented. Within the programmatics portion, a brief description of costing and program strategies is outlined.

Source record↗
NASA NTRS1983

Space Station needs, attributes and architectural options. Volume 2, book 2, part 2, Task 2: Information management system

Missions to be performed, station operations and functions to be carried out, and technologies anticipated during the time frame of the space station were examined in order to determine the scope of the overall information management system for the space station. This system comprises: (1) the data management system which includes onboard computer related hardware and software required to assume and exercise control of all activities performed on the station; (2) the communication system for both internal and external communications; and (3) the ground segment. Techniques used to examine the information system from a functional and performance point of view are described as well as the analyses performed to derive the architecture of both the onboard data management system and the system for internal and external communications. These architectures are then used to generate a conceptual design of the onboard elements in order to determine the physical parameters (size/weight/power) of the hardware and software. The ground segment elements are summarized.

Source record↗