Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “S-BAND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Single-screen triband FSS with double-square-loop elements

A single-screen double-square-loop (DSL) frequency selective surface (FSS) has been developed to multiplex the three frequency (S, X, and Ku) bands for NASA's CRAF/CASSINI mission. This triband DSL FSS reflects the X-band (7.2 and 8.4 GHz) waves and transmits the S-band (2.3 GHz) and the Ku-band (13.8 GHz) waves. A good agreement between predicted and measured transmission performance is found on a 0.001-in.-thick Kapton with/without a flat Kevlar honeycomb sandwich panel. It is found that the single-screen DSL FSS with/without the Kevlar honeycomb has a resonant frequency of 8.4 GHz for incident angle steered from normal to 45 deg and for both TE and TM polarizations.

Wu, T. K.↗

Evolution of the large Deep Space Network antennas

The evolution of the largest antenna of the US NASA Deep Space Network (DSN) is described. The design, performance analysis, and measurement techniques, beginning with its initial 64-m operation at S-band (2295 MHz) in 1966 and continuing through the present ka-band (32-GHz) operation at 70 m, is described. Although their diameters and mountings differ, these parabolic antennas all employ a Cassegrainian feed system, and each antenna dish surface is constructed of precision-shaped perforated-aluminum panels that are secured to an open steel framework

Imbriale, William A.↗

Space Network Interoperability Panel (SNIP) study

The Space Network Interoperability Panel (SNIP) is described in terms of the panel's composition, purpose, history, and ongoing activities. SNIP is a consortium comprising NASA, ESA, and NASDA that is dedicated to the study of interoperability of the data-relay satellite (DRS) systems of the three groups. S-band and Ka-band interoperability are addressed by the SNIP study program by means of defining operations concepts, technical subjects, and other matters relevant to international DRS system compatibility. The potential users of the interoperability scheme are listed, cross-support techniques are described, and the load situations of the three agencies are characterized. A common 'interoperability frequency framework' is proposed, and both left-and right-hand circular polarization are incorporated to enhance flexibility and minimize interference. An operations concept is outlined based on these and other recommendations as developed by the international SNIP study.

Ryan, Thomas↗

Galileo orbit determination for the Venus and Earth-1 flybys

This paper presents the orbit determination strategy and results in navigating the Galileo spacecraft from launch through its Venus and first earth flybys. Many nongravitational effects were estimated, including solar radiation pressure, small velocity impulses from attitude changes and eight trajectory correction maneuvers. Tracking data consisted of S-Band Doppler and range. The fitting of Doppler was difficult since one of the cpacecraft's two antennas was offset from the spin axis, thus producing the sinusoidal velocity fluctuation seen in the data. Finally, Delta Differential One-way Range data was used during the last three months of the earth approach to help deliver the spacecraft to within desired accuracy.

Kallemeyn, P. H.↗

Galileo radio science investigations

Galileo radio-propagation experiments are based on measurements of absolute and differential propagation time delay, differential phase delay, Doppler shift, signal strength, and polarization. These measurements can be used to study: the atmospheric and ionospheric structure, constituents, and dynamics of Jupiter; the magnetic field of Jupiter; the diameter of Io, its ionospheric structure, and the distribution of plasma in the Io torus; the diameters of the other Galilean satellites, certain properties of their surfaces, and possibly their atmospheres and ionospheres; and the plasma dynamics and magnetic field of the solar corona. The spacecraft system provides linear rather than circular polarization on the S-band downlink signal, the capability to receive X-band uplink signals, and a differential downlink ranging mode. A highly-stable, dual-frequency, spacecraft radio system is developed that is suitable for simultaneous measurements of all the parameters normally attributed to radio waves.

Howard, H. T.↗

An improved Venus gravity field from Doppler tracking of the Pioneer Venus Orbiter and Magellan spacecraft

A total of 365,000 Pioneer Venus Orbiter (PVO) S-band Doppler data points were fit in arcs ranging from one to four revolutions in length by estimating the spacecraft position and velocity, atmospheric density, and a solar pressure parameter at each arc epoch. The resultant converged PVO orbits were used to produce 194 information arrays for the Venus spherical harmonic coefficients complete to degree and order 21. A similar procedure was used to produce a second set of 72 information arrays for a 21 x 21 gravitational field from a limited, but global, sampling of Magellan S- and X-band data from cycles 1 and 2. The PVO and Magellan information arrays were combined and solved to obtain the 21 x 21 spherical harmonic expansion designated JPL-Venus Gravity Model 6A (VGM6A). The VGM6A harmonic field field produced significant improvements in the Doppler residual statistics obtained from field validation fits to both PVO and Magellan tracking data in comparison with alternative representations of Venus gravity.

Mcnamee, J. B.↗

Radio frequency interference effect on PN code sequence lock detector

The authors find the probabilities of detection and false alarm of the pseudonoise (PN) sequence code lock detector when strong radio frequency interference (RFI) hits the communications link. Both a linear model and a soft-limiter nonlinear model for a transponder receiver are considered. In addition, both continuous wave (CW) RFI and pulse RFI are analyzed, and a discussion is included of how strong CW RFI can knock out the PN code lock detector in a linear or a soft-limiter transponder. As an example, the Space Station Freedom forward S-band PN system is evaluated. It is shown that a soft-limiter transponder can protect the PN code lock detector against a typical pulse RFI, but it can degrade the PN code lock detector performance more than a linear transponder if CW RFI hits the link.

Kwon, Hyuck M.↗

Mars radar scattering - Arecibo/Goldstone results at 12.6- and 3.5-cm wavelengths

A wide variety of aspects of Mars radar scattering are examined. The spatial variations and wavelength dependence of the echo were investigated from dual-polarization continuous-wave radar observations of Mars from the 1988 and 1990 oppositions. The Arecibo S-band and Goldstone X-band radars were used to make the observations.

Harmon, J. K.↗

Pressurized Lunar Rover

The pressurized lunar rover (PLR) consists of a 7 m long, 3 m diameter cylindrical main vehicle and a trailer which houses the power and heat rejection systems. The main vehicle carries the astronauts, life support systems, navigation and communication systems, directional lighting, cameras, and equipment for exploratory experiments. The PLR shell is constructed of a layered carbon-fiber/foam composite. The rover has six 1.5 m diameter wheels on the main body and two 1.5 m diameter wheels on the trailer. The wheels are constructed of composites and flex to increase traction and shock absorption. The wheels are each attached to a double A-arm aluminum suspension, which allows each wheel 1 m of vertical motion. In conjunction with a 0.75 m ground clearance, the suspension aids the rover in negotiating the uneven lunar terrain. The 15 N-m torque brushless electric motors are mounted with harmonic drive units inside each of the wheels. The rover is steered by electrically varying the speeds of the wheels on either side of the rover. The PLR trailer contains a radiosotope thermoelectric generator providing 6.7 kW. A secondary back-up energy storage system for short-term high-power needs is provided by a bank of batteries. The trailer can be detached to facilitate docking of the main body with the lunar base via an airlock located in the rear of the PLR. The airlock is also used for EVA operation during missions. Life support is a partly regenerative system with air and hygiene water being recycled. A layer of water inside the composite shell surrounds the command center. The water absorbs any damaging radiation, allowing the command center to be used as a safe haven during solar flares. Guidance, navigation, and control are supplied by a strapdown inertial measurement unit that works with the on-board computer. Star mappers provide periodic error correction. The PLR is capable of voice, video, and data transmission. It is equipped with two 5 W X-band transponder, allowing simultaneous transmission and reception. An S-band transponder is used to communicate with the crew during EVA. The PLR has a total mass of 6197 kg. It has a nominal speed of 10 km/hr and a top speed of 18 km/hr. The rover is capable of towing 3 metric tons (in addition to the RTG trailer).

Creel, Kenneth↗

Study of narrow-band dichroic plates with circular, rectangular, or Pyleguide apertures

The dichroic plate considered in this article is a metal plate perforated with arrays of apertures such that electromagnetic waves of certain frequencies pass through the plate and other frequencies are reflected. The shape of the apertures is an important contributor to the performance of the dichroic plate. An S/X dichroic plate, which passes X-band (8.4-8.45 GHz) and reflects S-band (2.0-2.32 GHz), is chosen for a case study. A comparison of the performance of dichroic plates of the same thickness and array pattern is presented for three different aperture shapes: circular, Pyleguide, and rectangular.

Chen, J. C.↗

A method for modeling discontinuities in a microwave coaxial transmission line

A method for modeling discontinuities in a coaxial transmission line is presented. The methodology involves the use of a nonlinear least-squares fit program to optimize the fit between theoretical data (from the model) and experimental data. When this method was applied to modeling discontinuities in a slightly damaged Galileo spacecraft S-band (2.295-GHz) antenna cable, excellent agreement between theory and experiment was obtained over a frequency range of 1.70-2.85 GHz. The same technique can be applied for diagnostics and locating unknown discontinuities in other types of microwave transmission lines, such as rectangular, circular, and beam waveguides.

Otoshi, T. Y.↗

Differenced Doppler tracking in interplanetary navigation - The Magellan cruise reconstruction

The Magellan mission was the first in which Doppler and differenced Doppler tracking data were acquired at X-band uplink/downlink frequencies from the Deep Space Network (DSN). This paper describes a reconstruction of the Venus approach-phase navigation investigating the capabilities of these data types, which are up to an order of magnitude more precise than similar data acquired at S-band frequencies in previous missions. Comparisons of orbit solutions obtained with Doppler, Doppler plus differenced Doppler, and Doppler plus delta-differential one-way Range (DeltaDOR) data indicate that both differenced Doppler and DeltaDOR yield improvements of factors of 3 to 5 over the accuracy of the Doppler-only solutions obtained during Venus approach operations, in which the Doppler data were deweighted from their inherent accuracy due to mismodeling problems.

Ryne, Mark S.↗

Dual passband dichroic plate for X-band

A need arose in the NASA Deep Space Network, a worldwide tracking system, for a dichroic plate that would be transparent at two desired frequency bands in the X-band region and be totally reflective at S-band. The dual-passband dichroic plate that was developed to meet the technical requirements is a thick metallic plate having an array of periodic round holes filled with Teflon plugs. Test results on an experimental prototype plate indicate that it is technically possible to design a dielectrically filled dichroic plate that meets all of these technical requirements.

Otoshi, T. Y.↗

A multiparameter radar examination of a mesoscale convective system

Differences in the rainrates of various cells embedded within a mesoscale convective system on July 13, 1986 during the Cooperative Huntsville Meteorological experiment are examined. The NCAR CP2 S-band polarimetric radar deployed near Huntsville, Alabama, is used to characterize the rainfall field. Rainfall estimates are compared and contrasted using the single-parameter Marshall and Palmer (1948) method with the Illingworth and Caylor (1989) dual-polarization technique (ILC). The primary differences in the rainrate estimates are shown to be associated with the differences in the drop size distributions, derived from the ILC technique, that occur within the various storms.

Wright, P. D.↗

An improved model of the Earth's gravity field - GEM-T3

An improved model of the Earth's gravitational field is developed from a combination of conventional satellite tracking, satellite altimeter measurements, and surface gravimetric data (GEM-T3). This model gives improved performance for the computation of satellite orbital effects as well as a superior representation of the geoid from that achieved in any previous Goddard Earth Model. The GEM-T3 model uses altimeter data directly to define the orbits, geoid, and dynamic height fields. Altimeter data acquired during the GEOS-3 (1975-1976), SEASAT (1978), and GEOSAT (1986-1987) missions were used to compute GEM-T3. In order to accommodate the non-gravitational signal mapped by these altimeters, spherical harmonic models of the dynamic height of the ocean surface were recovered for each mission simultaneously with the gravitational field. The tracking data utilized in the solution includes more than 1300 arcs of data encompassing 31 different satellites. The observational data base is highly dependent on SLR, but also includes TRANET Doppler, optical, S-Band average range-rate and satellite-to-satellite tracking acquired between ATS-6 and GEOS-3. The GEM-T3 model has undergone extensive error calibration.

Nerem, R. S.↗

TDRS and the TDRS System

An overview of the Tracking and Data Relay Satellite (TDRS) system is given, including a brief history, the purpose of the TDRS, and who controls the satellite. The S-band and KU-band antennae are described. Footage of the TDRS-E (the fifth TDRS) deployment and images of various spacecraft from space are shown, along with computer simulations of the TDRS's operation.

Source record↗

Magellan Post Launch Mission Operation Report

Magellan was successfully launched by the Space Shuttle Atlantis from the Kennedy Space Center at 2:47 p.m. EDT on May 4, 1989. The Inertial Upper Stage (IUS) booster and attached Magellan Spacecraft were successfully deployed from Atlantis on Rev. 5 as planned, at 06:14 hrs Mission Elapsed Time (MET). The two IUS propulsion burns which began at 07:14 hrs MET and were completed at 07:22 hrs MET, placed the Magellan Spacecraft almost perfectly on its preplanned trajectory to Venus. The IUS was jettisoned at 07:40 hrs MET and Magellan telemetry was immediately acquired by the Deep Space Network (DSN). A spacecraft trajectory correction maneuver was performed on May 21 and the spacecraft is in the planned standard cruise configuration with all systems operating nominally. An initial attempt was made to launch Atlantis on April 28, 1989, but the launch was scrubbed at T-31 sec due to a failure of the liquid hydrogen recirculation pump on Space Shuttle Main Engine #1. The countdown had proceeded smoothly until T-20 min when the Magellan radio receiver "locked-on" the MIL 71 Unified S-Band (USB) transmission as the transmitter power was increased fro 2 kw to 10 kw in support of the orbiter launch. During the planned hold at T-9 min, the USB was confirmed as the source of the receiver "lock" and Magellan's launch readiness was reaffirmed. In addition a five-minute extension of the T-9 hold occurred when a range safety computer went off-line, creating a loss of redundancy in the range safety computer network. Following resumption of the countdown, both the orbiter and Magellan flows proceeded smoothly until the launch was scrubbed at T-31 sec.

Source record↗