Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Control of the spontaneous emission from a single quantum dash using a slow-light mode in a two-dimensional photonic crystal on a Bragg reflector

We demonstrate the coupling of a single InAs/InP quantum, emitting around 1.55 {mu}m, to a slow-light mode in a two-dimensional photonic crystal on Bragg reflector. These surface addressable 2.5D photonic crystal band-edge modes present the advantages of a vertical emission and the mode area and localization may be controlled, leading to a less critical spatial alignment with the emitter. An increase in the spontaneous emission rate by a factor of 1.5-2 is measured at low temperature and is compared to the Purcell factor predicted by three-dimensional time-domain electromagnetic simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Polyhedral Specular Reflector: A Spectrum-Splitting Multijunction Design to Achieve Ultrahigh ( >50%) Solar Module Efficiencies

The most feasible pathway to record 50% efficiency photovoltaic devices is by utilizing many (>4) junctions to minimize thermalization and nonabsorption losses. Here we propose a spectrum-splitting design, the polyhedral specular reflector (PSR), that employs an optical architecture to divide and concentrate incident sunlight, allowing the incorporation of more junctions compared with traditional monolithic architectures. This paper describes the PSR design and indicates the requirements to achieve a 50% efficiency module by coupling robust cell, optical, and electrical simulations. We predict that a module comprised of the seven subcells with an average external radiative efficiency of at least 3%, an optical architecture capable of a splitting efficiency of at least 88% and 300× concentration, small (≤1 μm) metallic fingers for subcell contact, and a state-of-the-art power conditioning system (>98% efficiency) can achieve a module efficiency of 50%, a record for both multijunction cells and modules. We also discuss the flexibility of the design and explore how adjusting the size and type of concentrators can still yield record module efficiencies (>40%).

solar (photovoltaic), solid state lighting, phonon↗

Application of Sol-Gel Method as a Protective Layer on a Specular Reflective Surface for Secondary Reflector in a Solar Receiver

Highly-specular reflective surfaces that can withstand elevated-temperatures are desirable for many applications including reflective heat shielding in solar receivers and secondary reflectors, which can be used between primary concentrators and heat collectors. A high-efficiency, high-temperature solar receiver design based on arrays of cavities needs a highly-specular reflective surface on its front section to help sunlight penetrate into the absorber tubes for effective flux spreading. Since this application is for high-temperature solar receivers, this surface needs to be durable and to maintain its optical properties through the usable life. Degradation mechanisms associated with elevated temperatures and thermal cycling, which include cracking, delamination, corrosion/oxidation, and environmental effects, could cause the optical properties of surfaces to degrade rapidly in these conditions. Protected mirror surfaces for these applications have been tested by depositing a thin layer of SiO2 on top of electrodeposited silver by means of the sol-gel method. To obtain an effective thin film structure, this sol-gel procedure has been investigated extensively by varying process parameters that affect film porosity and thickness. Endurance tests have been performed in a furnace at 150 degrees C for thousands of hours. This paper presents the sol-gel process for intermediate-temperature specular reflective coatings and provides the long-term reliability test results of sol-gel protected silver-coated surfaces.

14 SOLAR ENERGY↗

Effect of the photon lifetime on the characteristics of 850-nm vertical-cavity surface-emitting lasers with fully doped distributed Bragg reflectors and an oxide current aperture

The effect of the photon lifetime in an optical microcavity on the characteristics of 850-nm vertical-cavity surface-emitting lasers (VCSELs) with fully doped distributed Bragg reflectors (DBRs) and an oxide current aperture is studied. The photon lifetime in the microcavity is controlled by varying the upper DBR reflectance. It is found that the speed of VCSELs with a current-aperture diameter of 10 μm is mainly limited by the self-heating effect, despite an increase in the relaxation-oscillation damping coefficient with increasing photon lifetime in the microcavity. At the same time, the higher level of internal optical loss in lasers with a current-aperture diameter of 1.5 μm leads to dominance of the effect of relaxation-oscillation damping independently of the radiation output loss. In the case of devices with a current-aperture diameter of 5.5 μm, both mechanisms limiting the speed operate, which allow an increase in the VCSEL effective modulation frequency from 21 to 24 GHz as the photon lifetime decreases from 3.7 to 0.8 ps.

36 MATERIALS SCIENCE↗

Metamorphic distributed Bragg reflectors for the 1440–1600 nm spectral range: Epitaxy, formation, and regrowth of mesa structures

It is shown that metamorphic In{sub 0.3}Ga{sub 0.7}As/In{sub 0.3}Al{sub 0.7}As distributed Bragg reflectors (DBRs) with a reflection band at 1440–1600 nm and a reflectance of no less than 0.999 can be fabricated by molecular beam epitaxy (MBE) on a GaAs substrate. It is demonstrated that mesa structures formed from metamorphic DBRs on a GaAs substrate can be regrown by MBE and microcavities can be locally formed in two separate epitaxial processes. The results obtained can find wide application in the fabrication of vertical-cavity surface-emitting lasers (VCSELs) with a buried tunnel junction.

36 MATERIALS SCIENCE↗

Spherical Distributed Bragg Reflector with an Omnidirectional Stop Band in the Near-IR Spectral Range

Spherical distributed Bragg reflectors (SDBR) for near-IR (infrared) applications are fabricated by plasma-enhanced chemical-vapor deposition. The SDBRs consist of alternating quarter-wave layers of amorphous hydrogenated silicon (a-Si:H) and amorphous silicon oxide (a-SiO{sub 2}), deposited onto a glass or quartz microsphere that has a diameter of 500 μm and is doped with erbium ions. The reflection and transmission spectra of a SDBR are measured at different points on its surface. A wide band with high reflectance and low transmittance, i.e., a stop band, is detected. It is demonstrated that, for different radial directions from the center of the microspheres, the stop bands overlap to form an omnidirectional stop band. The influence exerted by the omnidirectional stop band on the spontaneous emission of erbium ions (1.53 μm) from the quartz microsphere is studied. It is shown that the omnidirectional stop band suppresses the intensity of spontaneous emission by more than an order of magnitude.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A spherical distributed Bragg reflector based on a-Si{sub 1–x}C{sub x}: H and a-SiO{sub 2} layers

A spherical distributed Bragg reflector (SDBR) for near-infrared applications is elaborated via plasma-enhanced chemical-vapor deposition. It consists of the alternating quarter-wave layers of amorphous hydrogenized silicon carbide (a-Si{sub 1–x}C{sub x}: H) and amorphous silicon oxide (a-SiO{sub 2}) deposited onto a glass microsphere. The reflection spectra of the SDBR are measured at different points of its surface. In all cases, the Bragg-reflection bands, as well as the wavelength range of their overlap, are detected, evidencing the presence of a complete photonic band gap in the SDBR obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser damage study of nodules in electron-beam-evaporated HfO{sub 2}/SiO{sub 2} high reflectors

A reactive electron beam evaporation process was used to fabricate 1.064 {mu}mHfO{sub 2}/SiO{sub 2} high reflectors. The deposition process was optimized to reduce the nodular density. Cross-sectioning of nodular defects by a focused ion-beam milling instrument showed that the nodule seeds were the residual particles on the substrate and the particulates from the silica source ''splitting.'' After optimizing the substrate preparation procedure and the evaporation process, a low nodular density of 2.7/mm{sup 2} was achieved. The laser damage test revealed that the ejection fluences and damage growth behaviors of nodules created from deep or shallow seeds were totally different. A mechanism based on directional plasma scald was proposed to interpret observed damage growth phenomenon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design of a broadband, high-power, off-axis spiral polarization reflector

Spirally polarized beams are known to produce a strong longitudinal field under high numerical aperture focusing. Here, we report on the design of a reflective optical element with an off-axis geometry that is capable of transforming a uniformly polarized beam into a predominantly spirally polarized beam. By utilizing the retardance present in Fresnel reflection, our device can operate over a broad range of wavelengths. The output polarization and intensity structure of a beam passing through the reflector are calculated using polarization and scalar ray tracing. Vector diffraction is used to calculate the polarization and intensity structure under $f/0.656$ focusing. The off-axis reflective design is well-suited for high-power laser applications and could enable current and future laser-based particle accelerators to achieve strong longitudinal fields at focus.

Black, A. Nicholas [Univ. of Rochester, NY (United↗

BIG TEN: A Large, Mixed-Uranium-Metal Cylindrical Core with 10% Average 235 U Enrichment, surrounded by a Thick 238 U Reflector

The idea for the Big Ten assembly was initially conceived in 1966. The assembly attained initial criticality at the Los Alamos Critical Experiment Facility (LACEF) in 1971. Big Ten is a cylindrical assembly with a core composed entirely of fissionable material in metal form, like most of the earlier critical assemblies at the LACEF. However, it is very large and massive; the name "Big Ten" reflects both its total mass of uranium (10 metric tons) and the average 235 U enrichment of its core (10%). The primary objective for Big Ten (References 1, 2, 3) was to measure effective cross sections in a neutron spectrum that, although still energetic, was appreciably softer than those in the earlier, smaller Los Alamos metal assemblies. Such a spectrum would resemble that of a liquid-metal fast breeder reactor (LMFBR). The desired flux spectrum could be produced by a critical assembly with fuel of considerably lower average enrichment. Therefore, the design demanded a much larger, reflected configuration. The metal core was surrounded by a 6-in.-thick depleted-uranium reflector.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Beam Spoiling a Reflector Antenna with Conducting Shim

A horn-fed dish reflector antenna has characteristics including beam pattern that are a function of its mechanical form. The beam pattern can be altered by changing the mechanical configuration of the antenna. One way to do this is with a reflecting insert or shim added to the face of the original dish.

Doerry, Armin Walter↗

Simulation of and Antenna Design for a Reflector-based Broadband Axion Search

The axion is a theoretical particle that presents a solution to the Strong CP problem in the Standard Model and is a strong candidate for dark matter. Axions convert to photons in the presence of a strong magnetic field. Searches for the axion capitalize on this property, but the unknown mass of the axion means the frequency of oscillation of the photons is also unknown. This work explores a broadband reflector-based experiment with a conical horn antenna and circular waveguide as a new potential search method for this particle.

43 PARTICLE ACCELERATORS↗

First Results from BREAD: Broadband Reflector Experiment for Axion Detection

We report R&D progress, as well as first dark photon search results with BREAD - a novel dish antenna for broadband ~$\mu$eV-eV wave-dark matter detection, which allows to utilize state-of-the-art high-field solenoidal magnets. Axions are converted non-resonantly to photons on a cylindrical metallic wall parallel to an external magnetic field. These photons are then focused using a novel reflector geometry onto a state-of-the-art high-sensitive photon detector. We recently demonstrated [PRL 128 (2022) 131801] that this concept using a $\sim 10\,{\rm m}^2$ conversion area in a $\sim 10\,{\rm T}$ solenoidal magnet has the potential to discover QCD axions spanning multiple decades in mass range. In this talk we discuss progress of our first stage pilot experiments - GigaBREAD and InfraBREAD - covering different mass ranges. We show first results of a room-temperature GigaBREAD prototype and discuss upscaling to larger, cryogenic and magnetized versions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

InfraBREAD: Characterization of Optically Smooth Reflector Parts

Optical laser characterization was performed on reflectors for the GigaBREAD and InfraBREAD experiments to compare to the designs and confirm they were machined properly. These slides go over a background of ultralight dark matter, as well as the optical setup to perform the measurements and the results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Assessing the Impact of Large Removable Beryllium Reflector Experiments on HFIR Performance and Safety Metrics

This study investigated the effect of various removable beryllium (RB) experiment configurations on High Flux Isotope Reactor (HFIR) metrics to address increasing interest in these facilities for materials and fuels irradiation research. The RB reflector contains eight large and four small irradiation experiment facilities that offer excellent neutron flux conditions to perform fission and fusion reactor materials and fuels irradiation research. This work aims to outline acceptable RB configurations based on safety, performance, and programmatic metrics. This study assessed experiment effects on reactivity, cycle length, fission rate density distributions, and neutron flux distributions using the Shift, HFIRCON, and SCALE ORIGEN codes. Initial evaluations focused on generic experiment materials including aluminum plugs, stainless steel plugs, molybdenum plugs, and aluminum plugs with gadolinium shields. Subsequent analyses of MiniFuel experiments were performed to evaluate a heterogenous experiment, consisting of a more complex geometry and bearing several materials, and to test the correlations developed with the generic materials on a real experiment. Furthermore, the effects of neutron poison concentrations in the standard beryllium plugs were evaluated. When assuming a reference RB configuration with eight large fresh beryllium plugs, perturbed configurations with three aluminum plugs, one stainless steel plug, one molybdenum plug, one gadolinium-shielded aluminum plug, and one MiniFuel experiment resulted in a cycle length reduction of less than 1.3 days, the current threshold before requiring additional approvals. Configurations with five aluminum plugs, one stainless steel plug, one molybdenum plug, one gadolinium-shielded aluminum plug, and two MiniFuel experiments meet the 1.3 day limit if irradiated beryllium plugs are considered. Fuel element fission rate density distributions remained within safety limits, with maximum local increases under 9%. Neutron flux calculations revealed large thermal flux depressions inside and around the perturbed RB facilities, while epithermal and fast neutron fluxes increased because of reduced neutron moderation by the perturbed materials. These findings provide valuable guidance for optimizing RB configurations to balance safety and performance at HFIR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Analyses of Dose Rates for Second Inner Reflector Plug Replacement at Spallation Neutron Source

The Inner Reflector Plug (IRP) is a central component of the Spallation Neutron Source (SNS) target monolith, which houses the liquid mercury target and four liter-sized neutron moderator units. It is exposed to high-level radiation fields during routine operation and builds up significant activity. The IRP needs to be replaced due to moderator neutron poison and decoupler burn-out, which is used for shaping neutron pulses. The first IRP exchange took place in March 2018 and next one, which is IRP2, is planned to be replaced during the facility maintenance period in the end of December 2025, beginning of January 2026 calendar year. The replacement of IRP is a complex task due to its location in the area receiving high irradiation, being under significant amount of shielding, and size, which requires removal in segments. For planning the replacement workflow to help to reduce radiation exposure to workers dose rates for each stage of extraction/replacement operation are predicted.

42 ENGINEERING↗

HEU Metal Delayed Critical Experiments with 10 to 19 Inch Thick Graphite Reflectors

Approximately 100 graphite-reflected highly enriched uranium (HEU, 93.14 wt % 235 U) metal annular and cylindrical critical experiments were performed in the early 1960s at the Oak Ridge Critical Experiments Facility (ORCEF). This report presents details from experiment logbooks, experimental data sheets and the author's memory for 44 HEU metal (93.14 wt % 235 U) critical assemblies with graphite reflectors varying from 10 to 19 in. thick, outside diameters varying from 7 to 15 in., inside diameters varying from 7 to 13 in. and critical HEU metal masses varying from 20.4 to 69.0 kg. The data from the 44 experiments described in this report are acceptable for use as criticality safety benchmark experiments for the International Criticality Safety Evaluation Program (ICSBEP) once the uncertainty analysis on the measured k eff is completed. Based on previous ICSBEP benchmarks with this HEU metal at ORCEF, the uncertainties in the measured k eff are expected to be as low as ±0.0004. Preparation of this report is part of an effort at Oak Ridge National Laboratory (ORNL) to document more than 15 undocumented series of critical and subcritical experiments enumerated in Critical and Subcritical NEA Benchmark Possibilities for Measurements at ORCEF and Other US DOE Facilities (Mihalzo, ORNL/TM-2019/1188, 2019) and performed by ORNL at ORCEF and other US Department of Energy critical experiments facilities. More than 500 operational days of critical facility time were used, not including setup and dismantlement time. This documentation for a part of one series of graphite reflected highly enriched uranium metal critical experiments, that used 50 operational days of ORCEF time, was performed using funding received from the DOE Office of Nuclear Energy’s Nuclear Energy University Programs at the University of Tennessee Nuclear Engineering Department. This documentation was also supported by the Nuclear Criticality, Radiation Transport, and Safety programs at ORNL.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Imaging with Spherically Bent Crystals or Reflectors

This paper consists of two parts: Part I describes the working principle of a recently developed x-ray imaging crystal spectrometer, where the astigmatism of spherically bent crystals is being used with advantage to record spatially resolved spectra of highly charged ions for Doppler measurements of the ion-temperature and toroidal plasmarotation- velocity profiles in tokamak plasmas. This type of spectrometer was thoroughly tested on NSTX and Alcator C-Mod, and its concept was recently adopted for the design of the ITER crystal spectrometers. Part II describes imaging schemes, where the astigmatism has been eliminated by the use of matched pairs of spherically bent crystals or reflectors. These imaging schemes are applicable over a wide range of the electromagnetic radiation, which includes microwaves, visible light, EUV radiation, and x-rays. Potential applications with EUV radiation and x-rays are the diagnosis of laserproduced plasmas, imaging of biological samples with synchrotron radiation, and lithography.

43 PARTICLE ACCELERATORS↗