Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quantum confinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

First principles study of electronic properties of gallium nitride nanowires grown along different crystal directions

The electronic properties of hydrogen-saturated GaN nanowires with different orientations and sizes are investigated using first-principles calculations, and three types of nanowires oriented along the [001], [110] and [1-10] crystal directions are considered. The electronic properties show little dependence on orientation. The hydrogen-saturated GaN nanowires show semiconducting behavior with a direct band gap larger than that of bulk wurtzite GaN. Quantum confinement leads to a decrease in the band gap of the nanowires with increasing nanowire size. The [001]-oriented nanowires with hexagonal cross sections are energetically more favorable than the [100]- and [1-10]-oriented nanowires with triangular cross-sections.

36 MATERIALS SCIENCE↗

A quantum energy transport model for semiconductor device simulation

This paper describes numerical methods for a quantum energy transport (QET) model in semiconductors, which is derived by using a diffusion scaling in the quantum hydrodynamic (QHD) model. We newly drive a four-moments QET model similar with a classical ET model. Space discretization is performed by a new set of unknown variables. Numerical stability and convergence are obtained by developing numerical schemes and an iterative solution method with a relaxation method. Numerical simulations of electron transport in a scaled MOSFET device are discussed. The QET model allows simulations of quantum confinement transport, and nonlocal and hot-carrier effects in scaled MOSFETs.

97 MATHEMATICS AND COMPUTING↗

Facile synthesis of nanocrystalline wurtzite Cu-In-S by amine-assisted decomposition of precursors

Phase-pure ternary wurtzite Cu-In-S nanocrystals have been synthesized by a simple amine-assisted decomposition of mixed precursor complexes derived from S-methyl dithiocarbazate (SMDTC) at a relatively low temperature without using any external surfactant. The crystal phase, morphology, crystal lattice, and chemical composition of the as-prepared products were analyzed by using X-ray diffraction, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and energy-dispersive X-ray spectroscopy (EDX). The optical properties show the pronounced quantum confinement effect in nanocrystals. A possible growth mechanism has been suggested for the formation of anisotropic wurtzite Cu-In-S It is believed that a combined effect of the chelating amine and precursors containing CH{sub 3}S unit plays a key role in the formation of the metastable phase of wurtzite Cu-In-S. - Graphical abstract: Phase-pure ternary wurtzite Cu-In-S nanocrystals have been synthesized by a simple amine-assisted decomposition of mixed precursor complexes derived from S-methyl dithiocarbazate (SMDTC) at a relatively low temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Chemical synthesis of mesoporous CuO from a single precursor: Structural, optical and electrical properties

We report a simple method for growing photoluminescent mesoporous CuO nanoparticles by a chemical route, using the single precursor technique. The final products were characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), N{sub 2} adsorption-desorption isotherm, UV-vis absorption spectroscopy, photoluminescence (PL) spectroscopy, Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy and Hall measurements. Structural analysis reveals that the average pore diameter of the as-prepared CuO is about 38.8 A and it comes with an average surface area of 66.63 m{sup 2}/g. N{sub 2}-sorption analysis shows that the resulting isotherm as type IV; which is the characteristic of mesoporous materials. The average crystal diameter, as derived from the XRD data analysis is found to be about 20 nm. FESEM measurement reveals that the material is composed of cubic nanoparticles. The UV-vis spectrum of the material shows significant amount of blue-shift in the band gap energy (E{sub g}), due to the quantum confinement effect exerted by the nanocrystals. The Raman study of the CuO nanostructures also indicates the high crystalline nature of the material. From the positive sign of Hall coefficient, the p-type conduction nature of the deposited film is established. The film was found to show high magnetoresistance, which is in the order of 10{sup 5} {Omega}. - Graphical abstract: FESEM image of the mesoporous CuO prepared from Cu(OOCPh){sub 2}Lut{sub 2} complex.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of CuO nanofibers, and investigation for its suitability as blocking layer in ZnO NPs based dye sensitized solar cell and as photocatalyst in organic dye degradation

Electrospun copper based composite nanofibers were synthesized using the copper acetate/polyvinyl alcohol/water solution as starting material. Synthesized composite nanofibers were sintered at 500 Degree-Sign C to obtain CuO nanofibers. XRD, FTIR and XPS techniques were used to confirm the presence of pure CuO nanostructures. The effect of annealing cycle on the crystalline structure of the CuO nanofibers was analyzed and observed that the decrease in crystallite size with an increase in the dwelling time improved the orientation of the CuO crystallite. The blue-shift in the band-gap energies of CuO nanofibers was observed as a result of quantum confinement from bulk CuO (1.2 eV) to one dimensional (1D) nanostructures ({approx}1.746 eV). The catalytic activity of the CuO fibers for the degradation of methyl orange was carried out and as a blocking layer in ZnO based DSSC was fabricated and observed a {approx}25% increase in the current density. - Graphical abstract: The study on the suitability of highly crystalline CuO nanofibers as the blocking layer in ZnO based DSSC was demonstrated and fabricated with possible energy applications. Highlights: Black-Right-Pointing-Pointer CuO nanofibers were successfully synthesized by using electrospinning technique. Black-Right-Pointing-Pointer The effect of the dwelling time of the annealing cycle for the formation of the crystallite CuO nanofibers was analyzed. Black-Right-Pointing-Pointer A 25% increase in the current density was observed with the application of CuO as blocking layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-aqueous metathesis as a general approach to prepare nanodispersed materials: Case study of scheelites

A general approach to the preparation of inorganic nanoparticles is proposed, using metathesis of precursor salts in non-aqueous liquids. Nanoparticles of scheelites AMO{sub 4} (A=Ba, Sr, Ca; M=Mo, W), were obtained with a quantitative yield. Precipitations in formamide, N-methylformamide, propylene carbonate, DMSO and polyols often provide narrow particle size distributions. Advantageous morphology was explained by strong ionic association in non-aqueous solvents, leading to slow nucleation and negligible Ostwald ripening. Mean particle size below 10 nm and high specific surface areas were obtained for several Ca(Sr)Mo(W)O{sub 4} materials, making them promising for applications as adsorbents or catalysts. Zeta-potential of scheelites in aqueous suspensions showed negative values in a wide range of pH. Systematic study of optical properties demonstrated variation of optical gap in the sequences W>Mo and Ba>Sr>Ca. The observed trends were reproduced by DFT calculations. No quantum confinement effect was observed for small particles, though the surface states induce low-energy features in the optical spectra. - Graphical abstract: Scheelites AMO{sub 4} (A=Ca, Sr, Ba; M=Mo, W) were prepared in various non-aqueous liquids with high specific surface areas and narrow size distributions. The optical gap of scheelites changes in the series Ca<Sr<Ba and Mo<W. - Highlights: • Scheelites AMO{sub 4} (A=Ca, Sr, Ba; M=Mo, W) were prepared in various non-aqueous liquids. • Narrow size distributions explained by ionic association in non-aqueous media. • Nanoparticles of less than 10 nm size and highest ever specific surface areas were obtained. • Optical gap of scheelites changes in the series Ca<Sr<Ba and Mo <W.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aqueous-based route toward Fe:ZnSe semiconductor nanocrystals: Synthesis and characterization

Nearly monodisperse and luminescent Fe-doped ZnSe semiconductor nanocrystals were synthesized by an aqueous-based route. The obtained nanocrystals were characterized by X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, photoluminescence and ultraviolet-visible absorption spectroscopy. The resulting nanocrystals were well retained in the zinc blende structure, and the Fe dopants were doped into the ZnSe nanocrystals, as confirmed by X-ray photoelectron spectroscopy. From combination of transmission electron microscopy result and computing methods according to ultraviolet-visible absorption spectrum and X-ray diffraction pattern, particle size of the obtained nanocrystals was found to be about 5 nm. Thioglycolic acid as ligand was successfully capped on the surface of the resulting nanocrystals, confirmed by Fourier transform infrared and energy dispersive X-ray spectroscopy. The obtained nanocrystals exhibit an emission peak at 431 nm; and the photoluminescence band is relatively narrow and symmetric, which indicates that the nanocrystals are nearly monodisperse and homogeneous. Absorption shoulder of the resulting nanocrystals is blue-shifted compared with that of corresponding bulk ZnSe, indicating the quantum confinement effect. The possible reaction mechanism of formation of Fe-doped ZnSe nanocrystals in the aqueous solution was also discussed. Our results demonstrate that the aqueous-based route could be successfully adopted for producing high-quality doped semiconductor nanocrystals. - Research Highlights: {yields} An aqueous-based route is demonstrated for synthesizing Fe:ZnSe nanocrystals. {yields} Structure, composition and optical properties of the nanocrystals were investigated. {yields} The synthetic route could be adopted for producing high-quality doped nanocrystals.

36 MATERIALS SCIENCE↗

Optical properties of tin oxide nanoparticles prepared by laser ablation in water: Influence of laser ablation time duration and laser fluence

Colloidal tin oxide nanoparticles are prepared by laser (having a wavelength of 1064 nm) ablation of tin metallic target immersed in pure deionized water. The influences of laser ablation time and laser fluence on the size and optical properties of the synthesized nanoparticles are studied. Prepared tin oxide nanoparticles are characterized by transmission electron microscope, selected area electron diffraction and UV-Visible absorption spectroscopy. The morphology of prepared tin oxide nanoparticles is found to be mostly spherical and with sizes in the nanometric range (mean radius of 3.2 to 7.3 nm). The measured UV-Visible absorption spectra show the presence of absorption peaks in the ultraviolet region. The band gap energy of samples prepared with different laser ablation time duration is calculated and is found to be increased with decrease in size (radius) of the prepared nanoparticles. Photoluminescence emission measurements at room temperature show that all the samples exhibit photoluminescence in the visible region. The peak photoluminescence emission intensity in the sample prepared with 50 min of laser ablation time is 3.5 times larger than that obtained in the sample prepared with 10 min of laser ablation time. - Highlights: Black-Right-Pointing-Pointer SnO{sub 2} nanoparticles (6.4-14.6 nm) are prepared by laser ablation in liquid technique. Black-Right-Pointing-Pointer The influences of laser ablation time and laser fluence are studied. Black-Right-Pointing-Pointer Samples are characterized by TEM and UV-Visible absorption spectroscopy. Black-Right-Pointing-Pointer UV-Visible absorption spectra exhibit quantum confinement effect. Black-Right-Pointing-Pointer Samples exhibit enhanced photoluminescence emissions in the visible region.

36 MATERIALS SCIENCE↗

Effects of size reduction on microstructural, optical, vibrational, magnetic and photocatalytic properties of ZnO nanocrystals

Highlights: • ZnO nanocrystals of different sizes 4–19 nm, thus different S/V ratios synthesized. • Lattice strain and lattice volume increase with size reduction. • Raman spectra show enhanced surface effects with phonon mode disappearance. • ESR shows exchange interaction; VSM shows surface originated ferromagnetism. • Photocatalysis is less affected with size reduction and surface enhancement. - Abstract: ZnO nanocrystals were synthesized in the size range 4 nm–19 nm by chemical co-precipitation method and extensively characterized by various techniques. Size control was achieved by changing the concentration of ME that acted as the capping agent. Lattice strain and lattice volume were found to increase with the decrease in crystallite size that could be attributed to an enhanced influence of surface atoms. Raman spectroscopy provided evidence of enhancement of surface influence and reduction of crystallinity with the observation of decrease in E{sub 2}{sup high} phonon mode intensity with a decrease in crystallite size. Electron spin resonance spectra revealed the presence of exchange interaction as well as presence of lattice disorder. Vibrating sample magnetometry results showed that M-H curves exhibit hysteresis loops which confirmed the ferromagnetic nature of the nanocrystals and it could be attributed to the interaction between localized electron spins resulting from oxygen vacancies at the surface. Blue shift of the UV–Visible absorption spectra was observed with decrease in crystallite size, which could be attributed to quantum confinement effect. Room temperature photoluminescence spectra were recorded under UV light excitation, which showed emission of different colours (light violet, violet, blue and green) in the visible region, attributable to the presence of various types of defects such as zinc interstitial, zinc vacancy and oxygen vacancy in the ZnO nanocrystals. Photodegradation of aqueous methylene blue by the ZnO nanocrystals was performed under simulated sunlight irradiation. There was a very small increase in efficiency of photodegradation with size reduction, which showed that there was no significant change in surface defects with size reduction in the nanocrystals despite the surface enhancement. A mechanism for photocatalysis involving defect states has been proposed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of bismuth doped barium sulphide nanoparticles

We have synthesized BaS:Bi nanocrystalline powder of average grain size 35 nm by solid-state diffusion method using sodium thiosulphate as a flux. During this work we have optimized the nature and amount of flux, amount of the dopant and temperature of firing for maximum yield of photoluminescence. The samples were characterized by X-ray powder diffraction (XRD) method, transmission electron microscopy (TEM), photoluminescence (PL) and UV-visible techniques. On excitation by 425 nm, these nanophosphors give one emission peak at 575 nm which corresponds to green color. In the excitation spectra of these particles there are two peaks at 350 nm and 425 nm. The effect of dopant concentration on the photoluminescence of BaS:Bi nanocrystallites has been studied which is in agreement with the principle of concentration quenching. The energy band gap of bismuth doped BaS nanopowder has been calculated to be 4.25 eV and is blue shifted in comparison to their bulk counterparts. The blue shift may be due to the quantum confinement in the particles.

36 MATERIALS SCIENCE↗

Application of nanostructured Ca doped CeO{sub 2} for ultraviolet filtration

Calcium doped CeO{sub 2} nanoparticles with doping concentrations between 0 and 50 mol% were synthesized by a co-precipitation method for ultraviolet filtration application. Below 20 mol% doping concentration, the samples were single-phase. From 30 mol%, CaCO{sub 3} appears as a secondary phase. The calculated CeO{sub 2} mean crystallite size was 9.3 nm for the pure and 5.7 nm for the 50 mol% Ca-doped sample. Between 250 and 330 nm, the absorbance increased for the 10, 30, and 40 mol% Ca-doped samples compared to the pure one. The band-gap was found to be 3.20 eV for the undoped, and between 3.36 and 3.51 eV for the doped samples. The blue shifts are attributed to the quantum confinement effect. X-ray photoelectron spectroscopy showed that the Ce{sup 3+} atomic concentration in the pure sample was higher than that of the 20 mol% Ca-doped sample.

36 MATERIALS SCIENCE↗

A study on the structural and mechanical properties of nanocrystalline CuS thin films grown by chemical bath deposition technique

We report a chemical route for the deposition of nanocrystalline thin films of CuS, using aqueous solutions of Cu(CH{sub 3}COO){sub 2}, SC(NH{sub 2}){sub 2} and N(CH{sub 2}CH{sub 2}OH){sub 3} [triethanolamine, i.e. TEA] in proper concentrations and ratios. The films were structurally characterized using X-ray diffraction technique (XRD), field emission scanning electron microscopy (FESEM) and optical analysis [both photo luminescence (PL) and ultraviolet-visible (UV-vis)]. Optical studies showed a large blue shift in the band gap energy of the films due to quantum confinement effect exerted by the nanocrystals. From both XRD and FESEM analyses, formation of CuS nanocrystals with sizes within 10-15 nm was evident. A study on the mechanical properties was carried out using nanoindentation and nanoscratch techniques, which showed good mechanical stability and high adherence of the films with the bottom substrate. Such study on the mechanical properties of the CuS thin films is being reported here for the first time. Current-voltage (I-V) measurements were also carried out for the films, which showed p-type conductivity.

36 MATERIALS SCIENCE↗

Structure and optical properties of Al{sub x}Zn{sub 1-x}O alloys by sol-gel technique

Research highlights: {yields} We propose wide gap semiconductor alloy - Al{sub x}Zn{sub 1-x}O (x = 0-0.5) thin films. {yields} Wurtzite structure of ZnO disappeared as the Al content exceeded 20 at.% and particles of thin films were getting smaller with the increase of Al content, being a formation of compound nanostructure. {yields} Al{sub x}Zn{sub 1-x}O thin films have high transmittance and blue-shift of the absorption edge. {yields} It was found that maximum value of binding energy of Zn3d, ZnLMM, Al2p, O1s was obtained when the Al content was 30 at.%. -- Abstract: Al{sub x}Zn{sub 1-x}O (x = 0-0.5) thin films were prepared on quartz glass substrates by sol-gel technique. X-ray diffraction (XRD), scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS) were employed for microstructure characterization of these thin films. In films with up to 20 at.% Al incorporation, compound nano-crystal phase was observed while wurtzite structure disappeared. Zn3d electron binding energy and Zn LMM's chemical shift were both increased by more than 0.4 eV. Transmittance spectra revealed that these films possessed high transmittance in the visible region, and the end of UV absorption edge shifted to less than 300 nm when Al content exceeds 20 at.% due to quantum confinement effect.

36 MATERIALS SCIENCE↗

Microstructural, electrical and optical properties of indium tin oxide (ITO) nanoparticles synthesized by co-precipitation method

Highlights: Black-Right-Pointing-Pointer The grain size of the ITO is decreased from 28.7 to 9.0 nm by increasing Sn dopant. Black-Right-Pointing-Pointer The strain values increased with the incorporation of Sn in In{sub 2}O{sub 3} host lattice. Black-Right-Pointing-Pointer The lower resistivity of 4.9 {Omega} cm is obtained for 10 at.% Sn doped ITO. Black-Right-Pointing-Pointer The band gap varies from 3.62 to 3.89 eV with dopant concentration of Sn. -- Abstract: In the present study, the synthesis of Tin doped indium oxide (ITO) nanopowder at different compositions (In/Sn = 0, 5, 10, 15 at %) was carried out by co-precipitation method. The decomposition of precipitated indium tin acetylacetonate precursor to form In{sub 2}O{sub 3}-SnO{sub 2} (Sn{sub 1-x}In{sub x}O{sub 2}) at 400 Degree-Sign C was confirmed by the thermal and FTIR studies. The changes in strain and grain size of the synthesized particle with respect to dopant concentration were determined from the X-ray diffraction (XRD) analysis. Transmission electron microscopy (TEM) images support to confirm the grain size. The optical properties on ITO nanoparticles were analyzed with UV-visible spectroscopy, and band gap was found to vary from 3.62 to 3.89 eV with Sn dopant concentration. This variation was ascribed to the quantum confinement effect.

36 MATERIALS SCIENCE↗

Effect of temperature on the optical and structural properties of hexadecylamine capped ZnS nanoparticles using Zinc(II) N-ethyl-N-phenyldithiocarbamate as single source precursor

Graphical abstract: Display Omitted Highlights: ► HDA-capped ZnS nanoparticles were synthesized via thermolysis of a single source precursor. ► Zinc(II) N-ethyl-N-phenyldithiocarbamate was used as the single source precursor. ► The growth temperature was varied to study the optical properties of the nanocrystals. ► Change in growth temperature affects the structural properties of the ZnS nanoparticles. ► Hexagonal wurtzite phase was obtained at lower temperatures while cubic sphalerite phase was obtained at higher growth temperatures. -- Abstract: Reported in this work is the synthesis of HDA (hexadecylamine)-capped ZnS nanoparticles by a single source route using Zinc(II) N-ethyl-N-phenyldithiocarbamate as a precursor. By varying the growth temperature, the temporal evolution of the optical properties and morphology of the nanocrystals were investigated. The as-synthesized nanoparticles were characterized using UV–vis absorption and photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). All the particles exhibited quantum confinement in their optical properties with band edge emission at the early stage of the reaction. The XRD showed transition from hexagonal wurtzite phase to cubic sphalerite phase as the growth temperature increases. The TEM image showed that the particles are small and spherical in shape while the HRTEM image confirmed the crystalline nature of the material.

36 MATERIALS SCIENCE↗

Morphological, luminescence and structural properties of nanocrystalline silicon thin films

Highlights: ► The PL spectra showed two stronger peaks and one weaker peak. ► The PL peak energies and optical band-gap values were found higher than 1.12 eV. ► The structural change from an amorphous to nanocrystalline with increasing [SiH{sub 4}]. - Abstract: Nanocrystalline silicon (nc-Si) thin films deposited by plasma-enhanced chemical vapor deposition at various silane flow rates ([SiH{sub 4}]) are studied. The characterization of these films by high-resolution transmission electron microscopy, Raman spectroscopy and X-ray diffraction reveals that no film and very thin film is deposited at [SiH{sub 4}] = 0.0 and 0.1 sccm, respectively. In addition, the structural change from an amorphous to a nanocrystalline phase occurs at around [SiH{sub 4}] = 0.2 sccm. In this study, the importance of arriving species at surfaces and precursors is clearly demonstrated by the effect of a small addition of SiH{sub 4} on the frequency and width of a Raman peak and the structure of the grown film. The infrared spectroscopic analysis shows no hydrogen incorporation in the nc-Si film deposited at the low value of [SiH{sub 4}]. However, the intensity of the peak around 2100 cm{sup −1} due to SiH decreases with increasing [SiH{sub 4}]. All fabricated films give photoluminescence in the range between 1.7 and 2.4 eV at room temperature, indicating enlargement of the band-gap energy. The presence of very small crystallites leads to the appearance of quantum confinement effects. The variations of the photoluminescence energy and spectral width are well correlated with the structural properties of the films such as crystallite size, crystalline volume fraction, and the density of Si-H bonds.

36 MATERIALS SCIENCE↗

Influence of temperature and precursor concentration on the synthesis of HDA-capped Ag{sub 2}Se nanoparticles

Graphical abstract: The temperature effect on the growth and size of silver selenide nanoparticles with the size distribution and XRD patterns. Highlights: ► The HDA-capped Ag{sub 2}Se nanoparticles were synthesized via the colloidal route. ► Temperature and monomer concentration of the reaction were varied. ► The concentration as a factor influenced particles with a decrease observed as the amount of Ag{sup +} ion source is increased. ► Temperature has expected influence on the growth of particles resulting in increase as the temperature is increased. ► TEM images shows spherical particles and their orthorhombic phase from structural analysis by XRD. - Abstract: The size dependent of temperature and precursor concentration on the synthesis of hexadecylamine capped Ag{sub 2}Se nanoparticles via the colloidal route were studied using the combination of optical and structural analysis. The as-prepared Ag{sub 2}Se nanoparticles showed the quantum confinement with all the obtained absorption band edges blue-shifted from the bulk and their corresponding emission maxima displaying a red-shift from band edges characterised by UV–vis absorption and photoluminescence spectroscopy. The particle sizes were obtained from transmission electron microscopy analysis. The increase in precursor concentration resulted in a decrease in nanoparticle sizes. The increase in reaction temperature showed an increase in the nanoparticle sizes, when the critical temperature at 160 °C was reached, the nanoparticle sizes decreased.

36 MATERIALS SCIENCE↗

Diffusion mediated agglomeration of CdS nanoparticles via Langmuir–Blodgett technique

Graphical abstract: - Highlights: • Diffusion mediated agglomeration of CdS nanoparticles are discussed. • Formation of CdS nanoparticles are confirmed by the change of chain length in XRD. • AFM shows the agglomeration of particles with a film swelling of about 5 Å. • UV–vis absorbance suggests that the grown particles show quantum confinement. • Hexagonal form of particle was confirmed by UV–vis reflectivity. - Abstract: We have reported a diffusion mediated agglomeration of cadmium sulphide (CdS) nanoparticles within cadmium arachidate (CdA{sub 2}) film matrix. The structural morphology and formation of CdS nanoparticles are characterized by X-ray diffraction (XRD), X-ray reflectivity (XRR), atomic force microscopy (AFM) and ultraviolet-visible spectroscopy techniques. X-ray diffraction (XRD) results show a change in bilayer difference from 53.04 Å to 43 Å after the sulphidation. An epitaxial growth of the films by ∼5 Å after sulphidation is confirmed from atomic force microscopy studies. The particle size calculated form UV–vis absorption edges are found to be varying from 2.6 nm to 3.3 nm for the different layers. A lateral dimension of 72–80 nm from AFM measurements and a size of 2.6–3.3 nm have confirmed one side flat pseudo two-dimensional disk-like nanoparticles. UV–vis reflectivity peak at E{sub 1} (A) confirms the formation of hexagonal CdS nanoparticles along the c-axis.

36 MATERIALS SCIENCE↗