SEARCH · Engineering Papers

Results for “Pressure Core”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS1984

High-temperature gaseous oxygen/hydrogen thrusters for space station

Efforts to determine the critical technologies necessary for the development of a high-temperature GO2/GH2 thruster are reviewed, for space station applications. Two types of thrust chambers are evaluated: one operable at high temperature and the other incorporating regenerative cooling. The high temperature chamber made of rhenium requires minimum cooling of the chamber wall, however, an oxidation barrier should be incorporated to prevent the rhenium thruster from readily oxidizing. The use of rhenium brought about a lower cost, lower weight, and simplicity of fabrication. The igniter-injector, the chamber, the test facility, and the test program are discussed. It is found that an obtained flow split of 58/42 increased the thruster performance from 3893 N-s/Kg to 4030 N-s/Kg for the same chamber pressure and overall mixture ratio. An increase in performance is also observed when the core mixture ratio is lowered. The thruster was tested for 1.9 hrs with no well degradation.

Dowdy, M. W.↗

NASA NTRS1991

Nuclear Thermal Propulsion: A Joint NASA/DOE/DOD Workshop

Papers presented at the joint NASA/DOE/DOD workshop on nuclear thermal propulsion are compiled. The following subject areas are covered: nuclear thermal propulsion programs; Rover/NERVA and NERVA systems; Low Pressure Nuclear Thermal Rocket (LPNTR); particle bed reactor nuclear rocket; hybrid propulsion systems; wire core reactor; pellet bed reactor; foil reactor; Droplet Core Nuclear Rocket (DCNR); open cycle gas core nuclear rockets; vapor core propulsion reactors; nuclear light bulb; Nuclear rocket using Indigenous Martian Fuel (NIMF); mission analysis; propulsion and reactor technology; development plans; and safety issues.

Clark, John S.↗

NASA NTRS1994

Vortex distortion during vortex-surface interaction in a Mach 3 stream

An experimental study has been conducted in Mach 3 wind tunnel to investigate the behavior of supersonic vortices as they interact with a wedge surface placed in their passage. The experimental setup was arranged so that interactions resulted in a close encounter of the vortex core and the wedge leading edge. Spark shadow photographs of the flowfield along the pressure measurements on the wedge surface were used to study the interaction problem. In their most organized form, distortion of streamwise vortices upon interacting with the wedge was found to result in formation of symmetric detached shock fronts far upstream of the wedge leading edge followed by an apparent slip surface separating a subsonic region from a supersonic zone. Interaction experiments leading to substantial changes in the structure of vortices revealed that the supersonic vortex distortion has strong resemblances to the incompressible 'B-breakdown' reported in the literature. Experimental results also indicate that the interaction strongly depends on the vortex strength and vortex proximity to the wedge leading edge, and the generated flowfield was found to be highly unsteady. Interaction of concentrated streamwise vortices with the oblique shock formed over the wedge surface resulted in formation of a locally three-dimensional shock wave with a limited subsonic region downstream of the shock.

Kalkhoran, Iraj M.↗

NASA NTRS2005

Numerical Prediction of Chevron Nozzle Noise Reduction using Wind-MGBK Methodology

Numerical predictions for single-stream chevron nozzle flow performance and farfield noise production are presented. Reynolds Averaged Navier Stokes (RANS) solutions, produced via the WIND flow solver, are provided as input to the MGBK code for prediction of farfield noise distributions. This methodology is applied to a set of sensitivity cases involving varying degrees of chevron inward bend angle relative to the core flow, for both cold and hot exhaust conditions. The sensitivity study results illustrate the effect of increased chevron bend angle and exhaust temperature on enhancement of fine-scale mixing, initiation of core breakdown, nozzle performance, and noise reduction. Direct comparisons with experimental data, including stagnation pressure and temperature rake data, PIV turbulent kinetic energy fields, and 90 degree observer farfield microphone data are provided. Although some deficiencies in the numerical predictions are evident, the correct farfield noise spectra trends are captured by the WIND-MGBK method, including the noise reduction benefit of chevrons. Implications of these results to future chevron design efforts are addressed.

Engblom, W.A.↗

NASA NTRS2009

Resilient Flexible Pressure-Activated Seal

A resilient, flexible, pressure-activated, high-temperature seal is adapted to be interposed between high and low pressure regions to provide sealing between opposing surfaces of adjacent relatively movable structures. The seal comprises at least one C-shaped sheet element. The C-shaped element design enables the seal to be pressure-activated to provide a radially outward biasing force, responsive to a seal-activating pressure differential acting across the seal thereby increasing resiliency. A centrally-located, resilient core structure provides load bearing and insulating properties. In an exemplary embodiment where at least two seal elements are used, each layer has a cutout slot pattern and the remaining strip material pattern. The slots provide flexibility to the seal, enabling the seal to be manually contoured to seal around corners and curves. The strip material of each layer covers the slots in each adjacent layer to minimize leakage through the slots. Attached barrier strips can block interface leakage between the seal and the opposing surfaces.

Steinetz, Bruce M.↗

NASA NTRS2017

Mixture-Fraction Measurements with Femtosecond-Laser Electronic-Excitation Tagging

Tracer-free mixture-fraction measurements were demonstrated in a jet using femtosecond-laser electronic-excitation tagging. Measurements were conducted across a turbulent jet at several downstream locations both in a pure-nitrogen jet exiting into an air-nitrogen mixture and in a jet containing an air-nitrogen mixture exiting into pure nitrogen. The signal was calibrated with known concentrations of oxygen in nitrogen. The spatial resolution of the measurement was approx.180 microns. The measurement uncertainty ranged from 5% to 15%, depending on the mixture fraction and location within the beam, under constant temperature and pressure conditions. The measurements agree with a mixture fraction of unity within the potential core of the jet and transition to the self-similar region.

Halls, Benjamin R.↗

NASA NTRS2023

The Digital Astronaut Simulation

The Digital Astronaut Simulation provides a human biomechanics modeling, simulation, and analysis capability that is enabling spaceflight hardware design to incorporate the human dynamic input early in development cycles as well as characterize performance after prototypes are built. The enhanced toolset includes a modified multibody model, updated motion capture marker sets, and refined methods for scaling and inverse kinematics. These provide increased accuracy for applications in exercise and extravehicular tasks in reduced gravity, especially where upper extremity motion is involved. A core capability highlighted is the calculation of ground reaction forces, moments, and center of pressure based on motion capture. Verification and validation efforts include comparison with force platform measurements.

Human Spaceflight↗

NASA NTRS2010

Fifty Years of Fluidic Injection for Jet Noise Reduction

The paper reviews 50 years of research investigating jet noise reduction through fluidic injection. Both aqueous and gaseous injection concepts for supersonic and subsonic jet exhausts are discussed. Aqueous injection reduces jet noise by reducing main jet temperature through evaporation and main jet velocity through momentum transfer between water droplets and the main jet. In the launch vehicle environment where large quantities of fluid do not have to be carried with the vehicle, water injection is very effective at reducing excess overpressures. For in-flight use, aqueous injection is problematic as most studies show that either large quantities of water or high injection pressures are required to achieve noise reduction. The most effective noise reduction injection systems require water pressures above 2000 kPa (290 psi) and water-to-mainjet mass flow rates above 10% to achieve overall sound pressure level reductions of roughly 6 dB in the peak jet noise direction. Injection at lower pressure (roughly 1034 kPa or 150 psi) has resulted in a 1.6 EPNdb reduction in effective perceived noise level. Gaseous injection reduces noise through jet plume modifications resulting from the introduction of streamwise vorticity in the main jet. In subsonic single-stream jets, air injection usually produces the largest overall sound pressure level reductions (roughly 2 dB) in the peak jet noise direction. In dual-stream jets, properly designed injection systems can reduce overall sound pressure levels and effective perceived noise levels but care must be taken to choose injector designs that limit sound pressure level increases at high frequencies. A reduction of 1.0 EPNdB has been achieved with injection into the fan and core streams. However, air injection into dual-stream subsonic jets has received little attention and the potential for noise reduction is uncertain at this time. For dual-stream supersonic jets, additional research needs to be conducted to determine if reductions can be achieved with injection pressures available from current aircraft engines. 1.

Henderson, Brenda↗

NASA NTRSDate not supplied

Coherence Analysis of the Space Launch System using Unsteady Pressure Sensitive Paint

Transonic buffet forces are a major source of unsteady loading on launch vehicles, thus requiring accurate estimation for efficient vehicle design. The state of the art in modeling these unsteady loads utilizes wind-tunnel tests where the fluctuating pressures are measured by pressure transducers (PTs) at discrete locations on a rigid buffet model. These pressures are then integrated over the surface of the vehicle to yield a series of orthogonal centerline loads called buffet forcing functions (BFFs). Typically, the PT layout aims at resolving the pressure correlation along the longitudinal axis of the vehicle. As a result, the distribution of azimuthal correlation and its impact on the estimated BFFs are not well known. To fill these gaps, extremely high-spatial-resolution uPSP data were collected for three different configurations of the Space Launch System in the NASA Ames Research Center 11-Foot Transonic Unitary Plan Wind Tunnel. The spatio-temporal behavior of the pressure correlation on these vehicles is analyzed and flow features of interest are investigated. It is shown that terminal shocks interacting with turbulence are a source of increased azimuthal coherence, especially when the shock develops at a junction. Vortex shedding off the forward attachment hardware that connects the core stage to the solid rocket boosters (SRBs) is the most severe buffet environment on the vehicle. The associated fluctuating pressures are shown to be highly coherent as far as the vehicle tail and up to 40 degrees away from the boosters. For selected areas of the vehicle, factoring the azimuthal coherence into the attenuation of discrete-measurements-based BFFs results in under prediction relative to the BFFs obtained from full integration of the uPSP data.

buffet↗

NASA NTRS2011

Underexpanded Supersonic Plume Surface Interactions: Applications for Spacecraft Landings on Planetary Bodies

Numerical and experimental investigations of both far-field and near-field supersonic steady jet interactions with a flat surface at various atmospheric pressures are presented in this paper. These studies were done in assessing the landing hazards of both the NASA Mars Science Laboratory and Phoenix Mars spacecrafts. Temporal and spatial ground pressure measurements in conjunction with numerical solutions at altitudes of approx.35 nozzle exit diameters and jet expansion ratios (e) between 0.02 and 100 are used. Data from steady nitrogen jets are compared to both pulsed jets and rocket exhaust plumes at Mach approx.5. Due to engine cycling, overpressures and the plate shock dynamics are different between pulsed and steady supersonic impinging jets. In contrast to highly over-expanded (e <1) and underexpanded exhaust plumes, results show that there is a relative ground pressure load maximum for moderately underexpanded (e approx.2-5) jets which demonstrate a long collimated plume shock structure. For plumes with e much >5 (lunar atmospheric regime), the ground pressure is minimal due to the development of a highly expansive shock structure. We show this is dependent on the stability of the plate shock, the length of the supersonic core and plume decay due to shear layer instability which are all a function of the jet expansion ratio. Asymmetry and large gradients in the spatial ground pressure profile and large transient overpressures are predominantly linked to the dynamics of the plate shock. More importantly, this study shows that thruster plumes exhausting into martian environments possess the largest surface pressure loads and can occur at high spacecraft altitudes in contrast to the jet interactions at terrestrial and lunar atmospheres. Theoretical and analytical results also show that subscale supersonic cold gas jets adequately simulate the flow field and loads due to rocket plume impingement provided important scaling parameters are in agreement. These studies indicate the critical importance of testing and modeling plume-surface interactions for descent and ascent of spacecraft and launch vehicles.

Mehta, M.↗

NASA NTRS1991

The metal abundance and specific energy of intracluster gas

The hot gas in the cores of rich galaxy clusters is metal-rich with nearly solar abundances of metals. It is not clear whether the metals were shed from galaxies via protogalactic winds or via ram-pressure stripping. It has been suggested that if metals were injected via centrally concentrated stripping, the overall abundances could be much less than those observed in cluster cores, diminishing the degree of stellar processing required. The observed energetics of intracluster gas can be used to deduce the metal injection mechanism, which in turn may allow the global metal abundance uncertainty to be resolved in the absence of spatially resolved X-ray spectra. Existing X-ray spectral and surface brightness data for galaxy clusters indicate that the gas in cool clusters has substantially greater specific energy than could have been gained through cluster collapse. Supernovae-driven protogalactic winds can provide this extra energy, while ram-pressure stripping cannot. Such protogalactic winds will distribute metals fairly homogeneously. Much processing of gas through stars is then required, with protogalaxies losing perhaps one-half of their initial luminous mass in metal-rich winds. Furthermore, the oxygen-to-iron ratio observed in two clusters indicates that the bulk of the iron in cluster gas was produced by Type II supernovae, not Type I supernovae, as is usually supposed.

White, Raymond E., III↗

NASA NTRS1974

Cruise performance of an isolated 1.15 pressure ratio turbofan propulsion system simulator at Mach numbers from 0.6 to 0.85

An isolated 1.15 pressure ratio turbofan engine simulator was tested at Mach numbers from 0.6 to 0.85. At Mach 0.75 the net propulsive force of the fan and nacelle (excluding core thrust) was 73 percent of the ideal fan net thrust. Internal losses amounted to 7 percent, and external drag amounted to 20 percent of the ideal fan net thrust. External pressure and friction drag were about equal. The propulsive efficiency with a 90 percent efficient fan would have been 63 percent. For the aerodynamic characteristics of the nacelle that was tested, increasing the fan pressure ratio to approximately 1.35 would have resulted in a maximum propulsive efficiency of 67 percent.

Steffen, F. W.↗

NASA NTRS1971

Proposed techniques for launching instrumented balloons into tornadoes

A method is proposed to introduce instrumented balloons into tornadoes by means of the radial pressure gradient, which supplies a buoyancy force driving to the center. Presented are analytical expressions, verified by computer calculations, which show the possibility of introducing instrumented balloons into tornadoes at or below the cloud base. The times required to reach the center are small enough that a large fraction of tornadoes are suitable for the technique. An experimental procedure is outlined in which a research airplane puts an instrumented, self-inflating balloon on the track ahead of the tornado. The uninflated balloon waits until the tornado closes to, typically, 750 meters; then it quickly inflates and spirals up and into the core, taking roughly 3 minutes. Since the drive to the center is automatically produced by the radial pressure gradient, a proper launch radius is the only guidance requirement.

Grant, F. C.↗

NASA NTRS2018

Effects of Cavity Diameter on Acoustic Impedance in a Complex Acoustic Environment

This paper investigates the effects of cavity diameter on the acoustic performance of conventional perforate-over-honeycomb liners. This investigation is a follow up to a previous study where it was demonstrated that the cavity diameter has a relatively small effect on the acoustic impedance for core cavity diameters up to 2.0 inches. In the current study, liner concepts are exposed to a complex acoustic environment, where higher-order modes are present. Four liner configurations are explored in this investigation, which include two cavity cores of different cavity diameters combined with two facesheets. These configurations are tested in the Grazing Flow Impedance Tube (GFIT) at Mach 0.0, 0.3, and 0.5 at a source sound pressure level of 150 dB. A comparison of the acoustic performance of these samples suggests that the cavity diameter has a relatively small effect on the acoustic impedance for core cavity diameters up to 2.0 inches at these conditions. These configurations are exposed to a more complex acoustic environment (e.g., higher-order modes) in the Curved Duct Test Rig (CDTR) at Mach 0.0 and 0.3.

Brown, M. C.↗

NASA NTRS1972

The Induced Magnetic Field of the Moon: Conductivity Profiles and Inferred Temperature

Electromagnetic induction in the moon driven by fluctuations of the interplanetary magnetic field is used to determine the lunar bulk electrical conductivity. The present data clearly show the north-south and east-west transfer function difference as well as high frequency rollover. The difference is shown to be compatible over the mid-frequency range with a noise source associated with the compression of the local remanent field by solar wind dynamic pressure fluctuations. Models for two, three, and four layer; current layer, double current layer, and core plus current layer moons are generated by inversion of the data using a theory which incorporates higher order multipoles. Core radii conductivities generally are in the range 1200 to 1300 km and 0.001 to 0.003 mhos/m; and for the conducting shell 1500 to 1700 km with 0.0001 to 0.0007 mhos/m with an outer layer taken as nonconducting. Core temperature based on available olivine data is 700 to 1000 C.

Sonett, C. P.↗

NASA NTRS1975

Structural response of fiber composite fan blades

A fiber composite airfoil, typical for high-tip speed compressor applications, is subjected to load conditions anticipated to be encountered in such applications, and its structural response is theoretically investigated. The analysis method used consists of composite mechanics embedded in pre- and post-processors and coupled with NASTRAN. The load conditions examined include thermal due to aerodynamic heating, pressure due to aerodynamic forces, centrifugal, and combinations of these. The various responses investigated include root reactions due to various load conditions, average composite and ply stresses, ply delaminations, and the fundamental modes and the corresponding reactions. The results show that the thermal and pressure stresses are negligible compared to those caused by the centrifugal forces. Also, the core-shell concept for composite blades is an inefficient design (core plies not highly stressed) and appears to be sensitive to interply delaminations. The results are presented in graphical and tabular forms to illustrate the types and amount of data required for such an analysis, and to provide quantitative data of the various responses which can be helpful in designing such composite blades.

Chamis, C. C.↗

NASA NTRS1975

A preliminary systems-engineering study of an advanced nuclear-electrolytic hydrogen-production facility

An advanced nuclear-electrolytic hydrogen-production facility concept was synthesized at a conceptual level with the objective of minimizing estimated hydrogen-production costs. The concept is a closely-integrated, fully-dedicated (only hydrogen energy is produced) system whose components and subsystems are predicted on ''1985 technology.'' The principal components are: (1) a high-temperature gas-cooled reactor (HTGR) operating a helium-Brayton/ammonia-Rankine binary cycle with a helium reactor-core exit temperature of 980 C, (2) acyclic d-c generators, (3) high-pressure, high-current-density electrolyzers based on solid-polymer electrolyte technology. Based on an assumed 3,000 MWt HTGR the facility is capable of producing 8.7 million std cu m/day of hydrogen at pipeline conditions, 6,900 kPa. Coproduct oxygen is also available at pipeline conditions at one-half this volume. It has further been shown that the incorporation of advanced technology provides an overall efficiency of about 43 percent, as compared with 25 percent for a contemporary nuclear-electric plant powering close-coupled contemporary industrial electrolyzers.

Escher, W. J. D.↗

NASA NTRS1982

Generation of a strong core centering force in a submillimeter compound droplet system

By amplitude-modulating the driving voltage of an acoustic levitating apparatus, a strong core centering force was generated in a submillimeter compound droplet system suspended by the radiation pressure in a gaseous medium. Depending on the acoustic characteristics of the droplet system, it was found that the technique can be utilized advantageously in the multiple-layer coating of an inertial confinement fusion pellet.

Lee, M. C.↗