SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This is an opensource library for benchmarking the system's GPU mixed precision capabilities. The software calculates solution of the system of linear equation in 64bit accuracy using mixed precision techniques and iterative refinement. Original benchmark designed is done by ICL, and it is name HPL-MxP (HPL-AI)
The change in length of an optical fiber-based Fabry-Pérot cavity (FPC) can be precisely measured using phase tracking, but the displacement range is limited by phase ambiguity. Period tracking techniques determine the absolute FPC length, but with larger uncertainties from tracking the spacing between multiple peaks. A hybrid method is demonstrated that identifies appropriate peaks for phase tracking using a coarse estimate obtained from the free spectral range to effectively maintain the high precision (∼1 nm) of phase tracking techniques to measure ∼24 µ m displacements, well beyond the range limitations (typically <1 µ m) of phase tracking methods.
We have demonstrated that the ion current resulting from collisions between metastable krypton atoms in a magneto-optical trap can be used to precisely measure the trap loading rate. We measured both the ion current of the abundant isotope Kr-83 (isotopic abundance = 11%) and the single-atom counting rate of the rare isotope Kr-85 (isotopic abundance similar to 1 x 10(-11)), and found the two quantities to be proportional at a precision level of 0.9%. This work results in a significant improvement in using the magneto-optical trap as an analytical tool for noble-gas isotope ratio measurements, and will benefit both atomic physics studies and applications in the earth sciences. (C) 2014 Optical Society of America
Extreme ultraviolet (EUV) lithography enables unprecedented resolution in semiconductor patterning but faces critical challenges in developing resist materials that achieve high-precision at economically viable throughput. Directed self-assembly (DSA) of block copolymers (BCPs) offers a promising solution for pattern rectification by leveraging thermodynamically determined domain structures to decouple BCP pattern quality from the imperfect original lithographic pattern. This prospective presents an overview of recent progress on the EUV + DSA strategy, covering advances in BCP material design, processing, metrology, and pattern transfer. We highlight recent advances in high-χ BCPs with perpendicular orientation and domain spacings compatible with EUV dimensions, leveraging A-b-(B-r-C) architectures. We also discuss progress in chemical pre-pattern fabrication using both positive- and negative tone resists, along with processing strategies to minimize defects and roughness based on BCP thermodynamics and assembly kinetics. We further examine metrology platforms for characterizing the thermodynamics of BCP materials and quantifying the size and shape of BCP domains. Lastly, we review pattern transfer strategies for generating functional inorganic masks suitable for semiconductor manufacturing. Together, these advances highlight the potential of DSA to complement EUV lithography, offering a pathway to address critical challenges in achieving high-precision patterning for the semiconductor industry.
The earthquake swarm accompanying the January 2022 Hunga Tonga-Hunga Ha'apai (HTHH) volcanic eruption includes a large number of posteruptive moderate-magnitude seismic events and presents a unique opportunity to use remote monitoring methods to characterize and compare seismic activity with other historical caldera-forming eruptions. We compute improved epicentroid locations, magnitudes, and regional moment tensors of seismic events from this earthquake swarm using regional to teleseismic surface-wave cross correlation and waveform modeling. Precise relative locations of 91 seismic events derived from 59,047 intermediate-period Rayleigh- and Love-wave cross-correlation measurements collapse into a small area surrounding the volcano and exhibit a southeastern time-dependent migration. Regional moment tensors and observed waveforms indicate that these events have a similar mechanism and exhibit a strong positive compensated linear vector dipole component. Precise relative magnitudes agree with regional moment tensor moment magnitude ($M_w$) estimates while also showing that event sizes and frequency increase during the days after the eruption followed by a period of several weeks of less frequent seismicity of a similar size. The combined information from visual observation and early geologic models indicate that the observed seismicity may be the result of a complex series of events that occurred after the explosive eruption on 15 January, possibly involving rapid resupply of the magma chamber shortly after the eruption and additional faulting and instability in the following weeks. In addition, we identify and characterize an $M_w$ 4.5 event five days before the paroxysmal explosion on 15 January, indicating that additional seismic events preceding the main eruption could have been identified with improved local monitoring. As a result, our analysis of the HTHH eruption sequence demonstrates the value of potentially utilizing teleseismic surface-wave cross correlation and waveform modeling methods to assist in the detailed analysis of remote volcanic eruption sequences.
This precision gas system (PGS) makes high-accuracy, high-precision measurements of CO2 mixing ratio (ppmv dry air) in air sampled at 2, 4, 25, and 60 m above the ground.
A series of precision shock timing experiments have been performed on NIF. These experiments continue to adjust the laser pulse shape and employ the adjusted cone fraction (CF) in the picket (1st 2 ns of the laser pulse) as determined from the re-emit experiment series. The NIF ignition laser pulse is precisely shaped and consists of a series of four impulses, which drive a corresponding series of shock waves of increasing strength to accelerate and compress the capsule ablator and fuel layer. To optimize the implosion, they tune not only the strength (or power) but also, to sub-nanosecond accuracy, the timing of the shock waves. In a well-tuned implosion, the shock waves work together to compress and heat the fuel. For the shock timing experiments, a re-entrant cone is inserted through both the hohlraum wall and the capsule ablator allowing a direct optical view of the propagating shocks in the capsule interior using the VISAR (Velocity Interferometer System for Any Reflector) diagnostic from outside the hohlraum. To emulate the DT ice of an ignition capsule, the inside of the cone and the capsule are filled with liquid deuterium.
This note presents constraints on Standard Model parameters using published and preliminary precision electroweak results measured at the electron-positron colliders LEP and SLC. The results are compared with precise electroweak measurements from other experiments, notably CDF and D0 at the Tevatron. Constraints on the input parameters of the Standard Model are derived from the results obtained in high-Q{sup 2} interactions, and used to predict results in low-Q{sup 2} experiments, such as atomic parity violation, Moller scattering, and neutrino-nucleon scattering. The main changes with respect to the experimental results presented in 2007 are new combinations of results on the W-boson mass and width and the mass of the top quark.
The International Atomic Energy Agency (IAEA) is interested in increasing capabilities of IAEA safeguards inspectors to access information that would improve their situational awareness on the job. A mobile information platform could potentially provide access to information, analytics, and technical and logistical support to inspectors in the field, as well as providing regular updates to analysts at IAEA Headquarters in Vienna or at satellite offices. To demonstrate the potential capability of such a system, Pacific Northwest National Laboratory (PNNL) implemented a number of example capabilities within a PNNL-developed precision information environment (PIE), and using a tablet as a mobile information platform. PNNL’s safeguards proof-of-concept PIE intends to; demonstrate novel applications of mobile information platforms to international safeguards use cases; demonstrate proof-of-principle capability implementation; and provide “vision” for capabilities that could be implemented. This report documents the lessons learned from this two-year development activity for the Precision Information Environment for International Safeguards (PIE-IS), describing the developed capabilities, technical challenges, and considerations for future development, so that developers working to develop a similar system for the IAEA or other safeguards agencies might benefit from our work.
Precision measurements offer important, low-energy tests of the Standard Model. The Qweak and (proposed) MOLLER experiments at Jefferson Lab are two such measurements. Since the interpretation of the experimental results depends on the precision of the theory prediction, radiative corrections need to be properly accounted for. In this thesis we examine the γZ box correction to the the weak charge of the proton.
In the search for physics beyond the Standard Model, high precision experiments to measure fundamental properties of particles are an important frontier. One group of such measurements involves magnetic dipole moment (MDM) values as well as searching for an electric dipole moment (EDM), both of which could provide insights about how particles interact with their environment at the quantum level and if there are undiscovered new particles. For these types of high precision experiments, minimizing statistical uncertainties in the measurements plays a critical role. \\ \indent This work leverages computer simulations to quantify the effects of statistical uncertainty for experiments investigating spin dynamics. In it, analysis of beam properties and lattice design effects on the polarization of the beam is performed. As a case study, the beam lines that will provide polarized muon beams to the Fermilab Muon \emph{g}-2 experiment are analyzed to determine the effects of correlations between the phase space variables and the overall polarization of the muon beam.
This is a technical report discussing our current level of understanding of a wide and varying distribution of uncertainties in velocity results from Photonic Doppler Velocimetry in its application to gas gun experiments. Using propagation of errors methods with statistical averaging of photon number fluctuation in the detected photocurrent and subsequent addition of electronic recording noise, we learn that the velocity uncertainty in VISAR can be written in closed form. For PDV, the non-linear frequency transform and peak fitting methods employed make propagation of errors estimates notoriously more difficult to write down in closed form expect in the limit of constant velocity and low time resolution (large analysis-window width). An alternative method of error propagation in PDV is to use Monte Carlo methods with a simulation of the time domain signal based on results from the spectral domain. A key problem for Monte Carlo estimation for an experiment is a correct estimate of that portion of the time-domain noise associated with the peak-fitting region-of-interesting in the spectral domain. Using short-time Fourier transformation spectral analysis and working with the phase dependent real and imaginary parts allows removal of amplitude-noise cross terms that invariably show up when working with correlation-based methods or FFT power spectra. Estimation of the noise associated with a given spectral region of interest is then possible. At this level of progress, we learn that Monte Carlo trials with random recording noise and initial (uncontrolled) phase yields velocity uncertainties that are not as large as those observed. In a search for additional noise sources, a speckleinterference modulation contribution with off axis rays was investigated, and was found to add a velocity variation beyond that from the recording noise (due to random interference between off axis rays), but in our experiments the speckle modulation precision was not as important as the recording noise precision. But from these investigations we do appreciate that the velocity-uncertainty itself has a wide distribution of values that varies with signal-amplitude modulation (is not a single value). To provide a rough rule of thumb for the velocity uncertainty, we computed the average of the relative standard deviation distributions from 60 recorded traces (with distributions of uncertainties roughly between 0.1 % to 1 % in each trace) and found a mean of the distribution of uncertainties for our experiments is not better than 0.4 % at an analysis window width of 5 ns (although for brief intervals it can be as good as 0.1 %). Further imagination and testing may be needed to reveal other possible hydrodynamics-related sources of velocity error in PDV.
The objective of this project was to improve the safety of operation of Lithium ion batteries (LIB)and at the same time significantly reduce the manufacturing cost of LIB separators. The project was very successful in demonstrating the improved performance and reduced cost attributed to using UV curable binder and high speed printing technology to place a very thin and precisely controlled ceramic layer on the surface of base separators made of polyolefins such as Polyethylene, Polypropylene and combinations of the two as well as cellulosic base separators. The underlying need for this new technology is the recently identified potential of fire in large format Lithium ion batteries used in hybrid, plug-in hybrid and electric vehicles. The primary potential cause of battery fire is thermal runaway caused by several different electrical or mechanical mechanisms; such as, overcharge, puncture, overheating, compaction, and internal short circuit. During thermal runaway, the ideal separator prevents ion flow and continues to physically separate the anode from the cathode. If the temperature of the battery gets higher, the separator may melt and partially clog the pores and help prevent ion flows but it also can shrink which can result in physical contact of the electrodes and accelerate thermal run-away even further. Ceramic coated separators eliminate many of the problems related to the usage of traditional separators. The ceramic coating provides an electrically insulating layer that retains its physical integrity at high temperature, allows for more efficient thermal heat transfer, helps reduce thermal shrinkage, and inhibits dendrite growth that could create a potential short circuit. The use of Ultraviolet (UV) chemistry to bind fine ceramic particles on separators is a unique and innovative approach primarily because of the instant curing of the UV curable binder upon exposure to UV light. This significant reduction in drying/curing time significantly reduces the cost of a ceramic coating. Another innovation is high precision, high speed, printing techniques that can apply a unique pattern of ceramic particles on base separators. The pattern will maximize ionic conductivity and minimize ceramic coating weight and thickness, while retaining the benefits of increased puncture strength, reduced thermal shrinkage and no decomposition. This project has met all of its goals and has been successfully completed. This successful completion has enabled Miltec UV to take the final steps leading to the commercialization of an innovative technology that will result in ceramic coated separators that can be manufactured and sold from the US, with increased production capacity, reduced cost, and improved battery safety.
Many properties of the high-energy-density environments in nuclear weapons tests, advanced laser-fusion experiments, the interior of stars, and other astrophysical bodies must be inferred from the resulting long-lived radioactive nuclei that are produced. These radioactive nuclei are most easily and sensitively identified by studying the characteristic gamma rays emitted during decay. Measuring a number of decays via detection of the characteristic gamma-rays emitted during the gamma-decay (the gamma-ray branching ratio) of the long-lived fission products is one of the most straightforward and reliable ways to determine the number of fissions that occurred in a nuclear weapon test. The fission products 147 Nd, 144 Ce, 156 Eu, and certain other long-lived isotopes play a crucial role in science-based stockpile stewardship, however, the large uncertainties (about 8%) on the branching ratios measured for these isotopes are currently limiting the usefulness of the existing data [1,2]. We performed highly accurate gamma-ray branching-ratio measurements for a group of high-atomic-number rare earth isotopes to greatly improve the precision and reliability with which the fission yield and reaction products in high-energy-density environments can be determined. We have developed techniques that take advantage of new radioactive-beam facilities, such as DOE's CARIBU located at Argonne National Laboratory, to produce radioactive samples and perform decay spectroscopy measurements. The absolute gamma-ray branching ratios for 147 Nd and 144 Ce are reduced <2% precision. In addition, high-energy monoenergetic neutron beams from the FN Tandem accelerator in TUNL at Duke University was used to produce 167 Tm using the 169 Tm(n,3n) reaction. Fourtime improved branching ratio of 167 Tm is used now to measure reaction-in-flight (RIF) neutrons from a burning DT capsule at NIF [10]. This represents the first measurement of RIF neutrons in any laboratory fusion system, and the magnitude of the signal has important implications for fundamental plasma science and for weapons physics.
Separations often account for a majority of process costs. This is because all traditional separation processes have inherent weaknesses that prevent the system from achieving perfect (or even near perfect in many instances) selectivity. These weaknesses result in large recycle streams and require multiple separation units in concert in order to produce a product clean enough for use or sale. An atomically precise membrane capable of allowing passage to only certain molecules would greatly improve process economics. We have synthesized atomically precise, triangular and rectangular-shaped, pore-containing macromolecules (channel molecules) using a unique, stiff, programmable molecular scaffold developed in Prof. Christian Schafmeister’s lab at Temple University. We synthesized porous triangular and rectangular macromolecules from our unique, poly-cyclic, shape-programmable, and functional group-programmable spiroligomer scaffolds. These macromolecules display functional groups pointing outward that will covalently cross-link with other functional groups on other copies of the molecule. The pores are of programmable size and shape to selectively allow some molecules and ions to pass through the pores while resisting others. These molecules were confirmed with H-NMR and HPLC/HRMS. Self-assembled layers of these molecules were fabricated with the use of a Langmuir trough where they were compressed to a mean area that is close to their corresponding macrocycle size (~0.5-1 nm 2 ). We have also demonstrated several strategies for supporting films of these selective membranes on polysulfone.
The experimental value of $(g\hbox{--}2)_\mu$ historically has been and contemporarily remains an important probe into the Standard Model and proposed extensions. Previous measurements of $(g\hbox{--}2)_\mu$ exhibit a persistent statistical tension with calculations using the Standard Model implying that the theory may be incomplete and constraining possible extensions. The Fermilab Muon g-2 experiment, E989, endeavors to increase the precision over previous experiments by a factor of four and probe more deeply into the tension with the Standard Model. The $(g\hbox{--}2)_\mu$ experimental implementation measures two spin precession frequencies defined by the magnetic field, proton precession and muon precession. The value of $(g\hbox{--}2)_\mu$ is derived from a relationship between the two frequencies. The precision of magnetic field measurements and the overall magnetic field uniformity achieved over the muon storage volume are then two undeniably important aspects of the e xperiment in minimizing uncertainty. The current thesis details the methods employed to achieve magnetic field goals and results of the effort.
The “High Precision LVDT Gauge Amplifier Commercialization CRADA ” is a development relationship between Lion Precision, a division of Automated Quality Technologies, Inc. and the Lawrence Livermore National Laboratory (LLNL). The purpose of the CRADA is to develop a high resolution contact displacement measurement gauge that is significantly better than state-of-the-art commercial products.
As the Deep Underground Neutrino Experiment nears construction, the existing neutrino facilities at Fermilab provide opportunities to test and refine methods characterizing high precision neutrino beams. MARGARITA is a water Cherenkov stopped muon detector that features twin photomultiplier tubes and two small, slightly differing detector volumes. The two detector volumes are designed to exploit the difference between the lifetimes of positive and negative muons in matter in order to characterize a neutrino beam. MARGARITA is currently being developed in the Neutrinos at the Main Injector (NuMI) beamline. The NuMI beamline also contains an existing muon monitoring system that has been underutilized. Improved analysis via ROOT and simulation via Geant4 of past, current, and future data from the muon monitors during an array of operating conditions could provide useful insights for any experiment at Fermilab utilizing a precision neutrino beam.