SEARCH · Engineering Papers

Results for “Plating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Random vibrations of laminated plates modeled within the first order shear deformation theory

This paper deals with the dynamic response of anisotropic laminated composite plates to stationary random excitation. The theory of laminated plates used here includes shear deformation and rotary inertia effects in the same manner as Mindlin's theory for isotropic homogeneous plates. Two cases of random pressure fields are considered in this analysis. In the first case, it is modeled as a uniformly distributed load, random in time with an exponential decaying correlation function, while in the second one as a jet noise, fully correlated in one direction and homogeneous in the perpendicular one. The analysis presented herein, as well as the obtained response characteristics, expressed in terms of mean-squares and angle-dependent mean-squares, may be useful in the design of composite plates subjected to random pressure fields and in the evaluation of their reliability.

Cederbaum, G.↗

NASA NTRS1989

Experiments on structural control of sound transmitted through an elastic plate

Active control of sound transmission through an elastic plate has been experimentally studied. The control was applied directly to the plate by point force vibration inputs, and the error information and performance was measured in the radiated acoustic field by discrete microphones. Test cases were studied in which the error sensors were accelerometers mounted on the plate. A time-domain least-mean-squares adaptive algorithm was used as the basis of the control system design. The results showed an impressive increase in plate transmission loss over a wide range of frequencies with a maximum of two control shakers. The advantages of using error information derived from the radiated acoustic field rather than structural response is demonstrated. The mechanisms behind the efficiency of this control approach are discussed.

Fuller, C. R.↗

NASA NTRS1990

Making More Efficient Use Of Battery-Plate Mass

Improved active material for positive plate of lead/acid electric storage battery made with additional porosity to give electrolyte access to larger plate-surface area. 65 to 68 percent of active mass of plate used to generate electric current. Batteries with new plate material offer extremely long cycle life.

Rowlette, John J.↗

NASA NTRS1990

Innovative design of composite structures: The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes

The gains in buckling performance are explored that can be achieved by deviating from the conventional straightline fiber format and considering the situation whereby the fiber orientation in a layer, or a group of layers, can vary from point to point. The particular situation studied is a simply supported square plate with a centrally located hole loaded in compression. By using both a sensitivity analysis and a gradient-search technique, fiber orientation in a number of regions of the plate are selected so as to increase the buckling load relative to baseline straightline designs. The sensitivity analysis is used to determine which regions of the plate have the most influence on buckling load, and the gradient search is used to find the design that is believed to represent the absolute maximum buckling load for the conditions prescribed. Convergence studies and sensitivity of the final design are discussed. By examining the stress resultant contours, it is shown how the curvilinear fibers move the load away from the unsupported hole region of the plate to the supported edges, thus increasing the buckling capacity. The tensile capacity of the improved buckling design is investigated, and it is shown that both tensile capacity and buckling capacity can be improved with the curvilinear fiber concept.

Hyer, M. W.↗

NASA NTRS1990

Modeling of composite beams and plates for static and dynamic analysis

A rigorous theory and corresponding computational algorithms was developed for a variety of problems regarding the analysis of composite beams and plates. The modeling approach is intended to be applicable to both static and dynamic analysis of generally anisotropic, nonhomogeneous beams and plates. Development of a theory for analysis of the local deformation of plates was the major focus. Some work was performed on global deformation of beams. Because of the strong parallel between beams and plates, the two were treated together as thin bodies, especially in cases where it will clarify the meaning of certain terminology and the motivation behind certain mathematical operations.

Hodges, Dewey H.↗

NASA NTRS1989

Modal interaction in postbuckled plates. Theory

Plates can have more than one buckled solution for a fixed set of boundary conditions. The theory for the identification and the computation of multiple solutions in buckled plates is examined. The theory predicts modal interaction (which is also called change in buckle pattern or secondary buckling) in experiments on certain plates with multiple theoretical solutions. A set of coordinate functions is defined for Galerkin's method so that the von Karman plate equations are reduced to a coupled set of cubic equations in generalized coordinates that are uncoupled in the linear terms. An iterative procedure for solving modal interaction problems is suggested based on this cubic form.

Thurston, Gaylen A.↗

NASA NTRS1990

Postbuckling response of long thick isotropic plates loaded in compression including higher order transverse shearing effects

Buckling and postbuckling results for aluminum plates loaded in compression are presented. The buckling results were plotted to show the effects of thickness on the stress coefficient. Buckling results are given for various length-to-width ratios. Postbuckling results for plates with transverse shearing flexibility are compared to results from classical theory for various width-to-thickness ratios. The plates are considered to be long with side edges simply supported, with edges free of stress and the plates are subjected to longitudinal compressive displacement. Characteristic curves indicating the average longitudinal direct stress resultant as a function of the applied displacements are calculated based on four different theories: Classical von Karman, first-order shear deformation, higher-order shear deformation, and three-dimensional flexibility. Present results indicate that the three-dimensional flexibility theory gives the lowest and therefore, most accurate results. The higher-order shear deformation theory has fewer unknowns than the three-dimensional flexibility but is not as accurate. The figures presented show that small differences occur in the maximum stress resultants and the transverse displacements calculated when the effects of transverse shear are included.

Stein, Manuel↗

NASA NTRS1990

Nonlinear analysis of compressively loaded linked-plate structures

A method is presented for the geometrically nonlinear analysis of the equilibrium behavior of a general class of compressively loaded, prismatic, linked-plate structures. The semi-analytical method accounts for geometric shape imperfections, and allows the use of laminated composite plate properties. Buckling eigenfunctions are used as displacement shape functions, and the associated second-order displacement fields are incorporated. The nonlinear plate equilibrium equations are expressed in terms of the assumed displacement form, and the Galerkin method is used to obtain a set of algebraic equations which are nonlinear in the modal amplitudes and the load parameter. Buckling eigensolutions for the class of structures under consideration can be obtained from the VIPASA computer code; thus, subject to some additional restrictions in loading and plate anisotropy, structural configurations which can be analyzed with regard to buckling response by VIPASA can be analyzed with regard to geometrically nonlinear response using the new method.

Stoll, Frederick↗

NASA NTRS1991

High-frequency techniques for RCS prediction of plate geometries

Several different high-frequency methods for modeling the radar cross sections (RCSs) of plate geometries are examined. The Method of Equivalent Currents and a numerically derived corner diffraction coefficient are used to model the RCS of a rectangular, perfectly conducting plate in nonprincipal planes. The Uniform Theory of Diffraction is used to model the RCS of a rectangular, perfectly conducting plate in principal planes. For the soft polarization case, first-order and slope-diffraction terms are included. For the hard polarization case, up to four orders of diffraction are included. Finally, the Uniform Theory of Diffraction for impedance wedges and the Impedance Boundary Condition are used to model the RCS of a coated, rectangular plate in principal planes. In most of the cases considered, comparisons are made between theoretical and experimental results.

Balanis, Constantine A.↗

NASA NTRS1991

High-frequency techniques for RCS prediction of plate geometries

Radar cross section (RCS) prediction of several rectangular plate geometries is discussed using high-frequency techniques such as the Uniform Theory of Diffraction (UTD) for perfectly conducting and impedance wedges and the Method of Equivalent Currents (MEC). Previous reports have presented detailed solutions to the principal-plane scattering by a perfectly conducting and a coated rectangular plate and nonprincipal-plane scattering by a perfectly conducting plate. These solutions are briefly reviewed and a modified model is presented for the coated plate. Theoretical and experimental data are presented for the perfectly conducting geometries. Agreement between theory and experiment is very good near and at normal incidence. In regions near and at grazing incidence, the disagreement between the data vary according to diffraction distances and angles involved. It is these areas of disagreement which are of extreme interest as an explanation for the disagreement will yield invaluable insight into scattering mechanisms which are not yet identified as major contributors near and at grazing incidence. Areas of disagreement between theory and experiment are identified and examined in an attempt to better understand and predict near-grazing incidence, grazing incidence, and nonprincipal-plane diffractions.

Balanis, Constantine A.↗

NASA NTRS1990

Pacific-North American plate motion from very long baseline interferometry compared with motion inferred from magnetic anomalies, transform faults, and earthquake slip vectors

Geodetic VLBI measurements were used to test whether the Pacific-North American plate velocity averaged over several years of direct observation (1984-1987) equals that averaged over millions of years. It was also tested whether this velocity parallels the San Andreas fault, transform faults and earthquake slip vectors in the Gulf of California, and earthquake slip vectors along the Queen Charlotte fault, along the Alaskan peninsula, and along the Kamchatkan peninsula. The VLBI data provide an estimate of the direction of plate motion that is independent of estimates from fault azimuths and earthquake slip vectors. The Euler vector determined from VLBI was found to be nearly identical to the Euler vector of plate motion model NUVEL-1, which is based on the trends of transform faults, earthquake slip vectors, and spreading rates from marine magnetic anomalies that average motion since 3 Ma. The velocity between the Pacific and North American plates averaged over the past several years equals or nearly equals its velocity averaged over the past several million years, the difference along their boundary nowhere exceeding 4 + or - 7 mm/yr.

Argus, Donald F.↗

NASA NTRS1991

Skin friction and heat transfer correlations for high-speed low-density flow past a flat plate

The independent and dependent variables associated with drag and heat transfer to a flat plate at zero incidence in high-speed, rarefied flow are analyzed anew to reflect the importance of kinetic effects occurring near the plate surface on energy and momentum transfer, rather than following arguments normally used to describe continuum, higher density flowfields. A new parameter, the wall Knudsen number Knx,w, based on an estimate of the mean free path length of molecules having just interacted with the surface of the plate, is introduced and used to correlate published drag and heat transfer data. The new parameter is shown to provide better correlation than either the viscous interaction parameter X or the widely-used slip parameter Voo for drag and heat transfer data over a wide range of Mach numbers, Reynolds numbers, and plate-to-freestream stagnation temperature ratios.

Woronowicz, Michael S.↗

NASA NTRS1991

Wake interference behind two flat plates normal to the flow - A finite-element study

A finite-element model of the Navier-Stokes equations is used for numerical simulation of flow past two normal flat plates arranged side by side at Reynolds number 80 and 160. The results from this simulation indicate that when the gap between the plates is twice the width of a single plate, the individual wakes of the plates behave independently, with the antiphase vortex shedding being dominant. At smaller gap sizes, the in-phase vortex shedding, with strong wake interaction, is favored. The gap flow in those cases becomes biased, with one of the wakes engulfing the other. The direction of the biased flow was found to be switching at irregular intervals, with the time histories of the indicative flow parameters and their power spectra resembling those of a chaotic system.

Behr, M.↗

NASA NTRS1991

The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes

Hyer, M. W.↗

NASA NTRS1992

Stress concentrations for straight-shank and countersunk holes in plates subjected to tension, bending, and pin loading

A three dimensional stress concentration analysis was conducted on straight shank and countersunk (rivet) holes in a large plate subjected to various loading conditions. Three dimensional finite element analysis were performed with 20 node isoparametric elements. The plate material was assumed to be linear elastic and isotropic, with a Poisson ratio of 0.3. Stress concentration along the bore of the hole were computed for several ratios of hole radius to plate thickness (0.1 to 2.5) and ratios of countersink depth to plate thickness (0.25 to 1). The countersink angles were varied from 80 to 100 degrees in some typical cases, but the angle was held constant at 100 degrees for most cases. For straight shank holes, three types of loading were considered: remote tension, remote bending, and wedge loading in the hole. Results for remote tension and wedge loading were used to estimate stress concentration for simulated rivet in pin loading. For countersunk holes only remote tension and bending were considered. Based on the finite element results, stress concentration equations were developed. Whenever possible, the present results were compared with other numerical solutions and experimental results from the literature.

Shivakumar, K. N.↗

NASA NTRS1991

Exploring possible relationships between plate pore size character and cell performance

The pore size character and plate manufacturing information for selected samples of older plate material were reviewed. When compared to certain cell performance parameters, certain correlations were found between plate pore character and cell performance. This technique may be useful for screening out certain types of plate material prior to assembly into cells.

Thaller, Lawrence H.↗

NASA NTRS1990

Initial postbuckling response of an unsymmetrically laminated rectangular plate

It was shown that anisotropic plates can have unstable postbuckling behavior resulting in potential imperfection sensitivity. The degree of instability for rectangular, simply-supported, cross-ply laminated plates is quantified. The analysis is based on asymptotic Koiter-type expansion of postbuckling response. The degree of postbuckling instability is quantified in terms of the reduction in load carrying capacity in the immediate postbuckling range. For graphite-epoxy plates it is found that this measure of instability is very small. Only a low aspect ratio plate with a high degree of anisotropy can have any significant reduction in its buckling load.

Haftka, Raphael T.↗

NASA NTRS1991

Thermal buckling and postbuckling of symmetrically laminated composite plates

The thermal buckling and postbuckling response of symmetrically laminated composite plates are discussed. Using variational methods in conjunction with a Rayleigh-Ritz formulation, thermal buckling and postbuckling are investigated for two laminates, a (+/- 45/0/90) and a (+/- 45/02), under two different simple support conditions, fixed and sliding. These laminates are subjected to the condition of a uniform temperature change. The effects of the principal material axis not being aligned with the edges of the plate, referred to here as material axis skewing, are also investigated. Although differences between buckling temperatures for the two support conditions were small, support conditions can have a large influence on thermal postbuckling response. In general, plates with fixed simple supports deflect more than plates with sliding simple supports. In addition, support conditions can influence modal interaction. Skewing of the material axis decreases the buckling temperatures of both laminates and, like fixed support conditions, causes increased postbuckling deflections. Skewing also influences modal interaction.

Meyers, C. A.↗