Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase change”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Understanding Lithium Local Environments in LiMn 0.5 Ni 0.5 O 2 Cathodes: A DFT-Supported 6 Li Solid-State NMR Study

LiMn 0.5 Ni 0.5 O 2 has been plagued by the structural failure driven by the irreversible phase change upon subsequent cycling and the structural degradation caused by the seemingly unavoidable Li/Ni exchange. This begs for a better understanding of the correlation between lithium local structures, synthesis conditions, and overall electrochemical properties of materials. In this study, we use density functional theory (DFT) to assist experimental 6 Li solid-state magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy to understand the nature and change in lithium local structures with extended annealing times (168 vs 15 h) synthesized at 900 °C. To correlate the NMR peak changes after different synthesis conditions, we calculated the NMR spectra of representative low-energy model configurations of LiMn 0.5 Ni 0.5 O 2 composition–zigzag, row, and flower structures–as well as the influence of Ni/Mn ordering and Li/Ni exchange on each spectrum using a supercell that is large enough to allow us to consider the effect of different relative configurations of adjacent transition metal (TM) layers. The analysis based on a combination of the calculated NMR and the experimental spectra suggests that most configurations contributing to the experimental spectra are in fact composed of a blend of configurations higher in energy than the classical well-ordered ground-state structures. Further, the extended annealing of LiMn 0.5 Ni 0.5 O 2 slightly enhances Ni/Mn and Li/Mn orderings while reducing the Li/Ni mixing ratio. This study shows how DFT calculations are crucial in providing a better understanding of the experimental characterization data and therefore local environments and domain structures in oxide materials, such as Li-ion battery cathodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nanoscale Compositional Mapping of Commercial LiNi 0.8 Co 0.15 Al 0.05 O 2 Cathodes Using Atom Probe Tomography

Nickel-rich cathodes provide improved specific capacity that lead to higher gravimetric energy density, critical for electric vehicles. However, poor long-term capacity retention at elevated temperatures/high C-rates (the rate of charge and discharge on a battery) stem from material issues: surface phase changes, corrosive side reactions with the electrolyte, ion dissolution and propagation of cracks. Introducing dopants, developing nanoscale surface coatings and graded core-shell structures have all improved the electrochemical performance of nickel-rich cathodes. However, a material level understanding on the effect of Li composition and distribution in Ni-rich cathodes is limited, due to a lack of characterization methods available that can directly image Li at the nanoscale. Hence, it is critical to establish methods such as atom probe tomography (APT), having both nanometer scale spatial resolution and high compositional sensitivity to quantitatively analyze battery cathodes. To fully realize its potential as a method for quantitative compositional analysis of commercial Li-ion batteries, we provide a comprehensive description of the challenges in sample preparation and analyze the dependency of the analysis parameters, specifically laser pulse energy on the measured stoichiometry of elements in a high Ni content cathode material; LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA). In this work, our findings show the stoichiometry variations cannot be explained by charge state ratios or Ga implantation damage alone during FIB preparation, indicating that additional factors such as crystallographic orientation may need to be considered to achieve quantitative nanoscale compositional analysis of such battery cathodes using APT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Probing Complex Chemical Processes at the Molecular Level with Vibrational Spectroscopy and X-ray Tools

Understanding the origins of structure and bonding at the molecular level in complex chemical systems spanning magnitudes in length and time is of paramount interest in physical chemistry. Here, we have coupled vibrational spectroscopy and X-ray based techniques with a series of microreactors and aerosol beams to tease out intricate and sometimes subtle interactions, such as hydrogen bonding, proton transfer, and noncovalent interactions. This allows for unraveling the self-assembly of arginine-oleic acid complexes in an aqueous solution and growth processes in a metal–organic framework. Terahertz and infrared spectroscopy provide an intimate view of the hydrogen-bond network and associated phase changes with temperature in neopentyl glycol. The hydrogen-bond network in aqueous glycerol aerosols and levels of protonation of nicotine in aqueous aerosols are visualized. Future directions in probing the hydrogen-bond networks in deep eutectic solvents and organic frameworks are described, and we suggest how X-ray scattering coupled to X-ray spectroscopy can offer insight into the reactivity of organic aerosols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Interlayer Coupling Controlled Ordering and Phases in Polar Vortex Superlattices

The recent discovery of polar topological structures has opened the door for exciting physics and emergent properties. There is, however, little methodology to engineer stability and ordering in these systems, properties of interest for engineering emergent functionalities. Notably, when the surface area is extended to arbitrary thicknesses, the topological polar texture becomes unstable. Here we show that this instability of the phase is due to electrical coupling between successive layers. We demonstrate that this electrical coupling is indicative of an effective screening length in the dielectric, similar to the conductor–ferroelectric interface. Controlling the electrostatics of the superlattice interfaces, the system can be tuned between a pure topological vortex state and a mixed classical-topological phase. This coupling also enables engineering coherency among the vortices, not only tuning the bulk phase diagram but also enabling the emergence of a 3D lattice of polar textures.

3D ordering↗
DOE OSTI2020

Phase-Exchange-Driven Wake-Up and Fatigue in Ferroelectric Hafnium Zirconium Oxide Films

Ferroelectric hafnium zirconium oxide holds great promise for a broad spectrum of complementary metal–oxide–semiconductor (CMOS) compatible and scaled microelectronic applications, including memory, low-voltage transistors, and infrared sensors, among others. An outstanding challenge hindering the implementation of this material is polarization instability during field cycling. Herein, the nanoscale phenomena contributing to both polarization fatigue and wake-up are reported. Using synchrotron X-ray diffraction, the conversion of non-polar tetragonal and polar orthorhombic phases to a non-polar monoclinic phase while field cycling devices comprising noble metal contacts is observed. This phase exchange accompanies a diminishing ferroelectric remanent polarization and provides device-scale crystallographic evidence of phase exchange leading to ferroelectric fatigue in these structures. A reduction in the full width at half-maximum of the superimposed tetragonal (101) and orthorhombic (111) diffraction reflections is observed to accompany wake-up in structures comprising tantalum nitride and tungsten electrodes. Combined with polarization and relative permittivity measurements, the observed peak narrowing and a shift in position to lower angles is attributed, in part, to a phase exchange of the non-polar tetragonal to the polar orthorhombic phase during wake-up. These results provide insight into the role of electrodes in the performance of hafnium oxide-based ferroelectrics and mechanisms driving wake-up and fatigue, and demonstrate a non-destructive means to characterize the phase changes accompanying polarization instabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mechanistic Study of Functional Electrolyte Solvents for High-Voltage Lithium Batteries

The pervasive use of Ni-rich cathode active materials, e.g., LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811), for high-energy-density Li-ion batteries (LIBs) has been hindered by rapid battery capacity decay when cycled with high charge cutoff voltages due to electrolyte decomposition in the conventional carbonate solvent-based electrolytes, oxidative parasitic side reactions at the electrolyte/cathode interface, and irreversible phase changes in the cathode active materials leading to dissolution of transition metals into the electrolytes. Various functional electrolyte solvents have been studied to tackle the above technical challenges, yet the roles of individual solvents in the performance of LIBs remain poorly understood. Here, in this study, we systematically investigate electrochemical performance mechanisms of fluorinated and organosilicon single solvents and cosolvents, for the first time, in high-voltage Li/NMC811 batteries, using electrochemical and analytical characterizations and density functional theory modeling. We observe that some unique combinations of the functional solvents can lead to exceptionally stable high-voltage cycle performance in the Ni-rich cathode-based LIBs. Our mechanistic study reveals that the synergistic effect of solvents plays a vital role in enabling electrochemical stability at both the Ni-rich cathode and the Li metal anode. Understanding the electrochemical performance mechanisms of functional solvents can greatly help in designing and formulating advanced electrolytes that enable the development of high-voltage, high-energy-density, long-cycle-life lithium batteries.

density functional theory modeling↗
DOE OSTI2025

Cold-Sprayed NMC622 Composite as a Cathode for Lithium-Ion Batteries

The growing demand for high-energy, low-cost lithium-ion batteries (LIBs) to power electric vehicles (EVs) necessitates advances in both materials and manufacturing processes. Conventional cathode fabrication methods, such as slurry casting and drying, are energy-intensive and pose challenges for scalability and environmental compliance. In this study, we propose cold-spray (CS) deposition as a solvent-free approach for fabricating LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) composite cathodes. Powder blends of NMC622, poly(vinylidene fluoride) (PVDF), and carbon black (CB) are directly deposited onto stainless steel and Inconel substrates under varied gas temperatures, pressures (and thus velocities), and standoff distances. The effects of temperature on the deposit morphology, coating density, and volume are systematically investigated. Computational fluid dynamics simulations reveal that increasing the gas temperature enhances the particle velocity, narrows the spray angle, and reduces the mass concentration radially at the nozzle outlet. CS deposition results in a dense cathode microstructure, accompanied by fracture in polycrystalline NMC622 particles. X-ray diffraction analysis further verifies that there are no phase changes during the deposition process. The electrochemical performance of the cold-sprayed cathodes reveals an initial capacity of approximately 96 mAh g –1 for single-crystal NMC622 and 167 mAh g –1 for polycrystalline NMC622. While these values are modest compared to state-of-the-art slurry-cast cathodes, which typically exhibit 180–200 mAh g –1 under optimized conditions. The results demonstrate a competitive performance given the solvent-free nature of the CS process and compare favorably with tape-cast samples made from identical feedstock. In conclusion, he CS process enables the formation of dense, binder-integrated cathode coatings without the need for solvent processing, offering a promising pathway for scalable, energy-efficient dry electrode manufacturing of next-generation LIBs.

Batteries↗
DOE OSTI2026

Oxygen Vacancy Evolution at Li x V 2 O 5 /LiPON Solid State Electrochemical Interfaces Using Depth Resolved Cathodoluminescence Spectroscopy

The formation of oxygen vacancies at buried LiPON/ Li x V 2 O 5 interfaces has been observed on a near-nanometer scale and nondestructively using depth-resolved cathodoluminescence spectroscopy (DRCLS) and interfacial markers. Before electrochemical cycling, as-deposited LiPON/Li x V 2 O 5 exhibits a 1.6 eV defect optical emission, which density functional theory calculations identify as originating from oxygen vacancies. This defect appears first within a few nanometers of the buried LiPON/Li x V 2 O 5 interface without cycling, indicating that spontaneous O diffusion from the Li x V 2 O 5 lattice into LiPON may have caused these interface-localized oxygen vacancy defects. DRCLS measured the intensity and spatial distribution of this oxygen vacancy signal as a function of electrochemical cycling in a LiPON/Li x V 2 O 5 half-cell, showing oxygen vacancy signal increasing and moving deeper into the electrode with increased cycle number. Significant electrochemical irreversibility was also observed, with poor Coulombic efficiency and a 15% drop in capacity over 50 cycles. Theoretical simulations predict that the presence of oxygen vacancies increases the energy barrier for lithium diffusion significantly, indicating that this aggregation of oxygen vacancies could be another battery degradation mechanism accompanying lithiation induced phase changes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The Kinetic Consequences of Water on Catalytic Methane Pyrolysis

Hydrogen production from biomass and natural gas has emerged as a prominent research area in response to the growing demand for energy from alternative sources that minimize CO 2 emissions. In this study, we investigate the impact of water, which is present in and generated from biomass-derived streams, on carbon nanotube (CNT) growth and hydrogen production during methane decomposition using Ni–Mo/MgO as a catalyst. We reveal here that the role of water on CNT growth is highly complex; its effect depends on the stage of growth at which the water is incorporated. When water is introduced at the beginning of methane decomposition ( t = 0 h), methane conversion rates are negatively impacted. We hypothesize that water inhibits the significant phase changes the Ni–Mo/MgO catalyst undergoes during catalyst carburization. In contrast, the incorporation of a small percentage of water after a stabilization period ( t = 3 h) results in methane conversion rate enhancements that scale with the introduced water partial pressure as water selectively reacts with amorphous carbon deposits that lead to catalyst deactivation, thus prolonging the lifetime of some of the most active sites. Moreover, water incorporation after stabilization significantly reduces the apparent activation energy. Density Functional Theory (DFT) calculations reveal that water preferentially interacts with carbon fragments on the catalyst surface to remove carbon deposits with a barrier lower than that required for methane activation, further supporting its role in cleaning active sites on the catalyst surface. Characterization of the resulting carbon nanotubes reveals the formation of more graphitic materials produced in the presence of water, highlighting the impact of water on nanotube properties. These results provide clarity toward the many ways in which water, or cofeeding of biomass-derived materials, may impact catalytic methane pyrolysis rates.

carbon nanotubes↗
DOE OSTI2025

Distinct Gas-Particle Partitioning and Viscosity Characteristics of Secondary Organic Aerosols Derived from α-Pinene versus Ocimene

Secondary organic aerosols (SOA) have complex, multicomponent composition that controls particle viscosity and gas-particle partitioning, key factors to their atmospheric evolution. This study investigates the chemical composition, volatility and viscosity of SOA formed by ozonolysis of cyclic α-pinene (PSOA) and acyclic ocimene (OSOA) monoterpenes. Using Temperature-Programmed Desorption combined with Direct Analysis in Real-Time ionization and High-Resolution Mass Spectrometry, we determined the molecular composition and saturation mass concentration of individual SOA constituents. These data enabled gas-particle partitioning and viscosity estimates under varied atmospheric conditions. PSOA, composed of higher molecular weight and less oxidized species, shows higher condensability and viscosity under high total organic mass (tOM) loadings. Here, in contrast, OSOA, consisting of more oxidized, lower molecular weight species, exhibits greater sensitivity to tOM, with viscosity increasing significantly upon dilution. Poke-flow experiments support this trend, indicating that OSOA undergoes more dynamic compositional and phase changes during atmospheric aging. These observations reveal distinct dynamic trends in the atmospheric transformations and reactivity of SOA from cyclic and acyclic monoterpenes, with the latter showing greater compositional changes during aging that alter viscosity and diffusion. This highlights the importance of incorporating such dynamic transformations into atmospheric models to improve predictions of SOA atmospheric loadings, lifetimes, and impacts.

cyclic and acyclic monoterpenes↗
DOE OSTI2025

Prospects of Nanoscience with Nanocrystals: 2025 Edition

Abstract Nanocrystals (NCs) of various compositions have made important contributions to science and technology, with their impact recognized by the 2023 Nobel Prize in Chemistry for the discovery and synthesis of semiconductor quantum dots (QDs). Over four decades of research into NCs has led to numerous advancements in diverse fields, such as optoelectronics, catalysis, energy, medicine, and recently, quantum information and computing. The last 10 years since the predecessor perspective “Prospect of Nanoscience with Nanocrystals” was published in ACS Nano have seen NC research continuously evolve, yielding critical advances in fundamental understanding and practical applications. Mechanistic insights into NC formation have translated into precision control over NC size, shape, and composition. Emerging synthesis techniques have broadened the landscape of compounds obtainable in colloidal NC form. Sophistication in surface chemistry, jointly bolstered by theoretical models and experimental findings, has facilitated refined control over NC properties and represents a trusted gateway to enhanced NC stability and processability. The assembly of NCs into superlattices, along with two-dimensional (2D) photolithography and three-dimensional (3D) printing, has expanded their utility in creating materials with tailored properties. Applications of NCs are also flourishing, consolidating progress in fields targeted early on, such as optoelectronics and catalysis, and extending into areas ranging from quantum technology to phase-change memories. In this perspective, we review the extensive progress in research on NCs over the past decade and highlight key areas where future research may bring further breakthroughs.

Chemistry↗
DOE OSTI2021

Ultrasound-Assisted Nonthermal, Nonequilibrium Separation of Organic Molecules from Their Binary Aqueous Solutions: Effect of Solute Properties on Separation

The separation of organic molecules in downstream processes, such as distillation, plays a vital role in biobased chemical production. A comprehensive study was performed here using ultrasonic energy to separate 11 organic molecules from their binary aqueous solutions under nonthermal, nonequilibrium, and phase-change free conditions. A batch sonoseparator with a three-stage mist collection unit allowed direct analysis of ultrasound-generated mist with an HPLC/GC and differentiation and quantification of the vapor and mist. The results showed that the alcohols (1-butanol, ethanol, 1-propanol, and methanol) and acetone were enriched in the ultrasound-generated mist with enrichment ratios of 3.2–5. On the other hand, ethylene glycol, glycerol, γ-valerolactone (GVL), glucose, and sucrose were diluted with dilution ratios in the range of 2.04–15.7 in the mist and vapor generated by ultrasound (or concentrated in the bulk solution). No enrichment nor dilution of acetic acid was observed. The role of various physicochemical parameters such as dynamic viscosity, surface tension, Henry’s law of solubility constant, vapor pressure, and octanol–water partition coefficient in the enrichment was examined. Furthermore, the hydrophobicity of the organic molecules represented by the octanol–water partition coefficient was found to play a crucial role in determining the separation characteristics of the molecules in ultrasound-generated mist and vapor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Stable-Cycling Sustainable Na-Ion Batteries with Olivine Iron Phosphate Cathode in an Ether Electrolyte

Sustainable batteries using nontoxic, earth-abundant, and low-cost materials are key to decarbonization. Olivine NaFePO 4 fulfills these criteria, is attractive for Na-ion batteries, and can be derived from LiFePO 4 recycled from Li-ion battery wastes. Critical knowledge is needed for transforming LiFePO 4 to NaFePO 4 to enable such a sustainable, green engineering path toward high-performance Na-ion batteries. Herein, we report on the development of a stable-cycling, sustainable olivine iron phosphate-based Na-ion battery empowered by an improved understanding of materials transformation and electrolyte chemistry. First, we found that the conventional carbonate electrolyte with fluoroethylene carbonate additive causes an additional plateau (~2.4 V) at the end of the discharge process of the FePO 4 ||Na metal cell, leading to lower initial discharge capacity and voltage. This result shows that the voltage profile is influenced by not only intrinsic materials phase transformation during battery cycling but also the electrolyte additives and interphases formed. With the 1 M NaPF 6 diglyme electrolyte, we achieved an excellent capacity retention of 96% and 98% after 500 cycles at 1 and 5 C, respectively. Second, we chemically sodiated FePO 4 to form single-phase Na 0.9 FePO 4 . Na 0.9 FePO 4 ||hard carbon full cells demonstrated a remarkable capacity retention of ~84% at 3 and 5 C after 1000 cycles. The successful implementation of hard carbon, which can be derived from biomass waste, will further improve the sustainability of energy storage technologies. Our research demonstrates that electrolyte chemistry influences the voltage profile of phase-changing electrodes and provides effective electrolyte and full-cell design solutions for stable-cycling NaFePO 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Correlating Li-Ion Solvation Structures and Electrode Potential Temperature Coefficients

Temperature coefficients (TCs) for either electrochemical cell voltages or potentials of individual electrodes have been widely utilized to study the thermal safety and cathode/anode phase changes of lithium (Li)-ion batteries. However, the fundamental significance of single electrode potential TCs is little known. Here, we discover that the Li-ion desolvation process during Li deposition/intercalation is accompanied by considerable entropy change, which significantly contributes to the measured Li/Li + electrode potential TCs. To explore this phenomenon, we compare the Li/Li + electrode potential TCs in a series of electrolyte formulations, where the interaction between Li-ion and solvent molecules occurs at varying strength as a function of both solvent and anion species as well as salt concentrations. As a result, we establish correlations between electrode potential TCs and Li-ion solvation structures and further verify them by ab initio molecular dynamics simulations. We show that measurements of Li/Li + electrode potential TCs provide valuable knowledge regarding the Li-ion solvation environments and could serve as a screening tool when designing future electrolytes for Li-ion/Li metal batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cascade CO 2 Insertion in Carbanion Ionic Liquids Driven by Structure Rearrangement

The CO 2 chemisorption in state-of-the-art sorbents based on oxide/hydroxide/amine moieties is driven by strong chemical bonding formation in the carbonate/bicarbonate/carbamate products, which in turn leads to high energy input in sorbent regeneration. In addition, the CO 2 uptake capacity was limited by the active sites’ utilization efficiency, with each active site incorporating one CO 2 molecule or less. In this work, a new concept and generation of sorbent was developed to achieve cascade insertion of multiple CO 2 molecules by leveraging structure rearrangement as the driving force, leading to in situ generation of extra CO 2 -binding sites and significantly reduced energy input for CO 2 release. The designed ionic liquids (ILs) containing carbanions with conjugated and asymmetric structure, deprotonated (methylsulfonyl)acetonitrile ([MSA]) anion, allowed the cascade insertion of two CO 2 molecules via consecutive C–C and O–C bond formations. The proton transfer and structure rearrangement of the carboxylic acid intermediates played critical roles in stabilizing the first integrated CO 2 and generating extra electron-rich oxygen sites for the insertion of the second CO 2 . The structure variation and reaction pathway were confirmed by operando spectroscopy, magnetic resonance spectroscopy (NMR), mass spectroscopy, and computational chemistry. The energy input in sorbent regeneration could be further reduced by harnessing the phase-changing behavior of the carbanion salts in ether solutions upon reacting with CO 2 , avoiding the energy consumption in heating the solvent. In conclusion, the fundamental insights obtained herein provide a promising approach to greatly improve the CO 2 sorption performance via sophisticated molecular-scale structural engineering of the sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Pore‐Scale Modeling of Reactive Transport with Coupled Mineral Dissolution and Precipitation

Abstract We present a new pore‐scale model for multicomponent advective‐diffusive transport with coupled mineral dissolution and precipitation. Both dissolution and precipitation are captured simultaneously by introducing a phase transformation vector field representing the direction and magnitude of the overall phase change. An effective viscosity model is adopted in simulating fluid flow during mineral dissolution‐precipitation that can accurately capture the velocity field without introducing any empirical parameters. The proposed approach is validated against analytical solutions and interface tracking simulations in simplified structures. After validation, the proposed approach is employed in modeling realistic rocks where mineral dissolution and precipitation are dominant at different locations. We have identified three regimes for mineral dissolution‐precipitation coupling: (a) compact dissolution‐precipitation where dissolution is dominant near the inlet and precipitation is dominant near the outlet, (b) wormhole dissolution with clustered precipitation where dissolution generates wormholes in the main flow paths and precipitation clogs the secondary flow paths, and (c) dissolution dominant where all solid grains are gradually dissolved. In the three regimes, the proposed approach provides reliable porosity‐permeability relationships that cannot be described well by traditional macroscale models. We find that the permeability can increase while the overall porosity decreases when the main flow paths are expanded by dissolution and adjacent pore spaces are clogged by precipitation.

58 GEOSCIENCES↗
DOE OSTI2024

A Comprehensive Northern Hemisphere Particle Microphysics Data Set From the Precipitation Imaging Package

Microphysical observations of precipitating particles are critical data sources for numerical weather prediction models and remote sensing retrieval algorithms. However, obtaining coherent data sets of particle microphysics is challenging as they are often unindexed, distributed across disparate institutions, and have not undergone a uniform quality control process. This work introduces a unified, comprehensive Northern Hemisphere particle microphysical data set from the National Aeronautics and Space Administration precipitation imaging package (PIP), accessible in a standardized data format and stored in a centralized, public repository. Data is collected from 10 measurement sites spanning 34° latitude (37°N–71°N) over 10 years (2014–2023), which comprise a set of 1,070,000 precipitating minutes. The provided data set includes measurements of a suite of microphysical attributes for both rain and snow, including distributions of particle size, vertical velocity, and effective density, along with higher-order products including an approximation of volume-weighted equivalent particle densities, liquid equivalent snowfall, and rainfall rate estimates. The data underwent a rigorous standardization and quality assurance process to filter out erroneous observations to produce a self-describing, scalable, and achievable data set. Case study analyses demonstrate the capabilities of the data set in identifying physical processes like precipitation phase-changes at high temporal resolution. Bulk precipitation characteristics from a multi-site intercomparison also highlight distinct microphysical properties unique to each location. This curated PIP data set is a robust database of high-quality particle microphysical observations for constraining future precipitation retrieval algorithms, and offers new insights toward better understanding regional and seasonal differences in bulk precipitation characteristics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Protonic solid-state electrochemical synapse for physical neural networks

Physical neural networks made of analog resistive switching processors are promising platforms for analog computing. State-of-the-art resistive switches rely on either conductive filament formation or phase change. These processes suffer from poor reproducibility or high energy consumption, respectively. Herein, we demonstrate the behavior of an alternative synapse design that relies on a deterministic charge-controlled mechanism, modulated electrochemically in solid-state. The device operates by shuffling the smallest cation, the proton, in a three-terminal configuration. It has a channel of active material, WO 3 . A solid proton reservoir layer, PdH x , also serves as the gate terminal. A proton conducting solid electrolyte separates the channel and the reservoir. By protonation/deprotonation, we modulate the electronic conductivity of the channel over seven orders of magnitude, obtaining a continuum of resistance states. Proton intercalation increases the electronic conductivity of WO 3 by increasing both the carrier density and mobility. This switching mechanism offers low energy dissipation, good reversibility, and high symmetry in programming.

36 MATERIALS SCIENCE↗