Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA SHEATH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Effects of emitting surfaces and trapped ions on the sheath physics and current flow in multidimensional plasma systems

Recent one-dimensional simulations of planar sheaths with strong electron emission have shown that trapping of charge-exchange ions causes transitions from space-charge limited (SCL) to inverse sheaths. However, multidimensional emitting sheath phenomena with collisions remained unexplored, due in part to high computational cost. As such, we developed a novel continuum kinetic code to study the sheath physics, current flow and potential distributions in two-dimensional unmagnetized configurations with emitting surfaces. For small negatively biased thermionic cathodes in a plasma, the cathode sheath can exist in an equilibrium SCL state. The SCL sheath carries an immense density of trapped ions, neutralized by thermoelectrons, within the potential well of the virtual cathode. For further increases of emitted flux, the trapped ion cloud expands in space. The trapped ion space charge causes an increase of thermionic current far beyond the saturation limit predicted by conventional collisionless SCL sheath models without ion trapping. For sufficiently strong emission, the trapped ion cloud consumes the entire 2D plasma domain, forming a mode with globally confined ions and an inverse sheath at the cathode. In situations where the emitted flux is fixed and the bias is swept (e.g. emissive probe), the trapped ions cause a large thermionic current to escape for all biases below the plasma potential. Strong suppression of the thermionic emission, required for the probe to float, only occurs when the probe is above the plasma potential.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimal proton acceleration from lateral limited foil sections and different laser pulse durations at relativistic intensity

The proton acceleration from a thin foil irradiated by a laser pulse at relativistic intensities is a process highly dependent on the electron dynamic at the rear side of the foil. By reducing the lateral size of the laser irradiated foil the hot electrons are confined in a small volume leading to an enhancement of both the maximum proton energy and the conversion efficiency in the target normal sheath acceleration regime. In this paper we demonstrate that an optimal lateral size of the target can be found. While a smaller target surface leads to a better hot electron confinement and enhances the Debye sheath accelerating the protons, it also leads to an increase of preplasma formation due to limited laser contrast available experimentally and hence to a decrease of the proton acceleration. The experimentally found optimum is in good agreement with analytic theory and 2D particle in cell simulations. In addition, the maximum proton energy as a function of pulse duration has been investigated. The experimental results fit to an analytical model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical investigation of sheath expansion and implant fluence uniformity in enhanced glow discharge plasma immersion ion implantation

In enhanced glow discharge plasma immersion ion implantation that involves a small-pointed anode and large area tabular cathode, the high negative substrate bias acts as the plasma producer and supplies the implantation voltage. An electric field is created to focus the electrons and the electron-focusing field in turn enhances the glow discharge process. The sheath physics is theoretically investigated using numerical simulation based on the multiple-grid particle-in-cell code. Electron focusing is corroborated and the plasma sheath has enough expansion when t=40 {mu}s so that a uniform distribution of the incident ion fluence is attained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radial Broadening of DC potential structures in front of ICRF antennas by transverse exchange of RF currents

Measurements show that the vicinity of powered Ion Cyclotron Range of Frequency (ICRF) antennae is biased positively with respect to its environment. This is attributed to RF-sheaths. The radial penetration of DC potentials into Tokamak SOL determines the power deposition on the walls and especially on the antenna structure, which is a key point for long time clean discharges. Within independent flux tube models of RF-sheath rectification the radial penetration of DC potentials is determined by the skin depth x{sub 0} = c/{omega}{sub pe} for the slow wave. When self-consistent exchanges of transverse RF currents are allowed between neighboring flux tubes, such a structure can be broadened radially up to a characteristic transverse length L. Broadening arises as soon as L>r{sub 0}. A linear modeling gives a first evaluation of the theoretical length L{approx_equal}(L{sub parallel} {rho}{sub ci}/){sup 1/2}. Within the 'flute assumption' it scales with the length L{sub parallel} of open flux tubes and the ion Larmor radius {rho}{sub ci}. This has been confirmed by the SEM code which takes into account non-linear rectifications. Applying our model to several potential maps generated by an ITER antenna, it comes out that L ranges between 1 and 10 cm depending on local L{sub parallel} and on typical ITER plasma parameters. Langmuir probe measurements on Tore Supra suggest that the broadening is lower than predicted by the code, which supposes that currents do not occur all over the parallel magnetic lines but on a fraction of it.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Entire plasmas can be restructured when electrons are emitted from the boundaries

It is well known that electron emission can restructure the thin sheaths at plasma-facing surfaces. But conventional models assume that the plasma's structure negligibly changes (the “presheath” is still thought to be governed by ion acceleration to the Bohm speed). Here, it is shown by theory and simulation that the presheath can take a fundamentally different structure where the emitted electrons entering the quasineutral region cause numerous changes. Gradients of total plasma density, ion and electron pressures, and electric potential throughout the “inverted” presheath can carry different magnitudes, and opposite signs, from Bohm presheaths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cascaded target normal sheath acceleration

A cascaded target normal sheath acceleration (TNSA) scheme is proposed to simultaneously increase energy and improve energy spread of a laser-produced mono-energetic proton beam. An optimum condition that uses the maximum sheath field to accelerate the center of the proton beam is theoretically found and verified by two-dimensional particle-in-cell simulations. An initial 10 MeV proton beam is accelerated to 21 MeV with energy spread decreased from 5% to 2% under the optimum condition during the process of the cascaded TNSA. The scheme opens a way to scale proton energy lineally with laser energy.

43 PARTICLE ACCELERATORS↗

Traveling electric field probed by a fine particle above voltage-modulated strips in a striped electrode device

It is described that the distribution of the horizontal electric field above a striped electrode can be inferred from the trajectory of a single fine particle with known mass and diameter. The striped electrode consists of 100 segmented stainless steel strips, each electrically insulated. A traveling periodic potential profile is produced above the striped electrode by modulating the voltage signals on the strips. When the voltage modulation is on, the fine particle, which is originally levitated in the sheath region above the striped electrode, experiences a periodic oscillation along both the vertical and the horizontal directions because of the periodic electric force arising from the modulation voltages. Tracking the motion of the fine particles, the electric force is obtained from the momentum equation including the gravity and the neutral gas friction. With the particle charge estimated by the vertical oscillation method, the electric field can be derived. The horizontal electric field obtained by this method is in agreement with the result predicted by a collisional particle-in-cell simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasimonoenergetic proton bunches generation from doped foil targets irradiated by intense lasers

We propose a scheme to generate 10 MeV-level quasimonoenergetic proton bunches using proton-doped heavy-ion targets irradiated by intense lasers via target normal sheath acceleration. The heavy substrate ions provide a long-life quasi-stable sheath field to accelerate the doped protons at the target rear and consequently a quasimonoenergetic proton bunch is produced. The scheme is demonstrated by two-dimensional particle-in-cell simulations. An exemplificative simulation with parameters of targets made by ion-implant technique, a kind of modern doping process, gives a quasimonoenergetic bunch with peak energy {approx}13MeV, energy spread {approx}24%, and {approx}nC charge at the focused laser intensity 10{sup 20}W/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-energy monoenergetic protons from multistaged acceleration of thin double-layer target by circularly polarized laser

Multistaged acceleration of solid-density thin foils by ultraintense circularly polarized laser pulse is investigated. A stable radiation pressure acceleration (RPA) stage is first established. Higher dimensional effects such as transverse instabilities and enhanced electron heating then gradually make the initially opaque foil transparent to the laser light. Accordingly, the dominant acceleration mechanism changes smoothly from RPA to target normal sheath acceleration (TNSA). The transition can therefore enhance the maximum energy of the accelerated ions but broaden their energy spectrum. For a double-layer target, however, the light ions (protons) in the backlayer can be efficiently accelerated in the RPA and TNSA regimes nearly monoenergetically. Two-dimensional particle-in-cell simulations show that with this scheme a circularly polarized laser pulse of peak intensity 3.9x10{sup 22} W/cm{sup 2} can produce a collimated proton bunch that persists for many Rayleigh lengths and its peak energy can reach 4.2 GeV with FWHM of 200 MeV.

43 PARTICLE ACCELERATORS↗

Proposed hole-target for improving maximum proton energy driven by a short intense laser pulse

By using particle-in-cell simulations, a new method for energetic collimated proton generation via intense short pulse laser-thin foil interactions is presented. To enhance the electron heating efficiency, a small hole is bored at the center of a thin foil target. The small hole combines target heating mechanisms effectively, which results in a high proton maximum energy. While an ultraintense, ultrashort laser pulse propagates through a small hole (diameter<laser spot size), the laser pulse drives electrons pulled out from the hole inner wall effectively inside the hole. When these electrons leave the target, a strong sheath field is formed between the electrons and the target rear surface and this accelerates protons from the rear surface of the target. The effective combination of the laser longitudinal ponderomotive force with the transverse heating (by E field) mechanism results in highly efficient electron heating of the hole target. When the rear part of the hole is filled with a proton-electron contamination layer, energetic collimated protons are produced. The scaling of the maximum proton energy of a hole target over a wide range of laser pulse intensities is presented and compared with that of a simple planar target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Studies of sheath characteristics in a double plasma device with a negatively biased separating grid and a magnetic filter field

A double plasma device has two regions: Source region and target region. These two regions are divided by a magnetic filter field. A grid is placed coplanar to the magnetic filter. To study the sheath structure in the target region, a metallic plate is placed at the center, which can be biased with respect to the chamber (ground) potential. Plasma is created in the source region by filament discharge technique. Plasma diffusing from the source region to the target region is subjected to the magnetic filter field and also an electric field applied on the grid. Plasma thus obtained in the target region forms a sheath on the biased plate. The influence of both the magnetic filter field and the electric field, applied between the grid and the chamber wall, on the sheath structure formed on the biased plate is studied. It is found that the magnetic filter field and the electric field change the sheath structure in different ways.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement and modeling of the radio frequency sheath impedance in a large magnetized plasma

The DC and RF properties of radio frequency (RF) driven sheaths were studied in the Large Plasma Device (LAPD) at the University of California, Los Angeles. The experiments diagnosed RF sheaths on field lines connected to a grounded plate at one end and an ion cyclotron range of frequencies (ICRF) antenna at the other end. The experimental setup permitted measurement of the RF sheath impedance at the plate as a function of DC sheath voltage, with the latter controlled by varying the RF current applied to the antenna. Here, the DC current-voltage characteristics of these sheaths and the RF sheath impedance measurements were compared with modeling. Hot electrons, present in the LAPD plasma, were inferred to contribute significantly to both the DC and RF currents and hence the RF impedance. It was postulated that at very low power hot electrons could not access the region of the plasma subject to RF waves, resulting in an increased RF impedance. Within some experimental limitations and significant assumptions, an RF sheath impedance model was verified by the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear surface plasma wave induced target normal sheath acceleration of protons

The mode structure of a large amplitude surface plasma wave (SPW) over a vacuum–plasma interface, including relativistic and ponderomotive nonlinearities, is deduced. It is shown that the SPW excited by a p-polarized laser on a rippled thin foil target can have larger amplitude than the transmitted laser amplitude and cause stronger target normal sheath acceleration of protons as reported in a recent experiment. Substantial enhancement in proton number also occurs due to the larger surface area covered by the SPW.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three dimensional effects on proton acceleration by intense laser solid target interaction

Multi-dimensional effects on ion acceleration by a normally incident linearly polarized intense laser pulse interacting with a thin solid target have been investigated numerically, where the laser has the peak intensity of 1.37×10{sup 20} W/cm{sup 2}, focused spot size of 6 μm, pulse duration of 33 fs, and total pulse energy about 3 J, which are commercially available now. We have checked the effects of simulation geometries by running one, two, and three dimensional (1D, 2D, 3D) particle-in-cell simulations. 3D simulation results show that, in the case of using a relatively thick target (in the opaque regime, i.e., 2 μm) with the so-called target normal sheath field acceleration mechanism, electrons spread almost uniformly along two transverse directions. While in the case of using an ultra-thin target (in the relativistic-induced transparent regime, i.e., 100 nm) with the so-called break-out afterburner mechanism, electrons spread more quickly along the direction orthogonal to the laser polarization direction especially at the early stage. The transverse spreading of electrons strongly decreases the electron density at the rear side of the target. Such an effect causes different estimation of electron temperatures in different simulation geometries. Usually, 1D and 2D simulations overestimate the temperature; and as a result, the maximum proton energy observed in 1D and 2D simulations is, respectively, about 3 and 2 times of that observed in 3D simulation.

43 PARTICLE ACCELERATORS↗

Effect of parallel currents on drift-interchange turbulence: Comparison of simulation and experiment

Two-dimensional (2D) turbulence simulations are reported in which the balancing of the parallel and perpendicular currents is modified by changing the axial boundary condition (BC) to vary the sheath conductivity. The simulations are carried out using the 2D scrape-off-layer turbulence (SOLT) code. The results are compared with recent experiments on the controlled shear de-correlation experiment (CSDX) in which the axial BC was modified by changing the composition of the end plate. Reasonable qualitative agreement is found between the simulations and the experiment. When an insulating axial BC is used, broadband turbulence is obtained and an inverse cascade occurs down to low frequencies and long spatial scales. Robust sheared flows are obtained. By contrast, employing a conducting BC at the plate resulted in coherent (drift wave) modes rather than broadband turbulence, with weaker inverse cascade, and smaller zonal flows. The dependence of the two instability mechanisms (rotationally driven interchange mode and drift waves) on the axial BC is also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reduction of RF sheaths potentials by compensation or suppression of parallel RF currents on ICRF antennae

Radio Frequency (RF) sheaths are suspected to limit the performance of present-day Ion Cyclotron Range of Frequencies (ICRF) antennae over long pulses and should be minimized in future Fusion devices. Within the simplest models, RF sheath effects are quantified by the integral V{sub RF} {integral}E{sub ||}{center_dot}dl where the parallel RF field E{sub ||} is linked with the slow wave. On 'long open field lines' with large toroidal extension on both sides of the antenna it was shown that V{sub RF} is excited by parallel RF currents j{sub ||} flowing on the antenna structure. We thus propose two ways to reduce |V{sub RF}| by acting on j{sub ||} on the antenna front face. The first method, more adapted for protruding antennae, consists in avoiding the j{sub ||} circulation on the antenna structure, by slotting the antenna frame on its horizontal edges and by cutting partially the Faraday screen rods. The second method, well suited for recessed antennae, consists in compensating j{sub ||} of opposite signs along long flux tubes, with parallelepiped antennae aligned with tilted flux tubes. The different concepts are assessed numerically on a 2-strap Tore Supra antenna phased [0, {pi}] using near RF fields from the antenna code TOPICA. Simulations stress the need to suppress all current paths for j{sub ||} to reduce substantially |V{sub RF}| over the whole antenna height.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The impact of contaminants on laser-driven light ion acceleration

The impact of contaminants on laser-driven ion acceleration is investigated using particle-in-cell simulations. The conventional ion acceleration mechanism, target normal sheath acceleration, has been revisited for targets with proton-rich contaminants in the form of water vapor. The targets considered have a deuterated plastic layer on the rear surface of an aluminum target, and the influence of the contaminant layer on the deuteron acceleration is investigated. In the early stage of ion acceleration, the space-charge electrostatic field on the rear target surface accelerates only the outermost, proton-rich layer of ions, which inhibits the deuteron acceleration by shielding it from the field. When the proton layer is depleted, the deuterons become exposed to the space-charge field and are promptly accelerated. This scenario was tested with a two-dimensional particle-in-cell simulation model by varying the contaminant layer thickness and laser fluence (laser energy per unit area). For laser fluences F{sub laser}<1 J/{mu}m{sup 2}, the contamination layer over the surface inhibits the deuteron acceleration from the rear surface, while in the opposite case of laser fluences F{sub laser}>1 J/{mu}m{sup 2} deuterons and heavier ions can be successfully accelerated with conversion efficiency of laser energy into ions of more than 1%. Experimental data from a 6 {mu}m thick aluminum foil coated with a 1 {mu}m deuterated plastic layer on the back surface are suggestive of the detrimental role of contaminants on deuteron acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗