Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA COMPOSITION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Thick Binder-Free Electrodes for Li-Ion Battery Fabricated Using Templating Approach and Spark Plasma Sintering Reveals High Areal Capacity

The templating approach is a powerful method for preparing porous electrodes with interconnected well-controlled pore sizes and morphologies. The optimization of the pore architecture design facilitates electrolyte penetration and provides a rapid diffusion path for lithium ions, which becomes even more crucial for thick porous electrodes. In this work, NaCl microsize particles are used as a templating agent for the fabrication of 1 mm thick porous LiFePO 4 and Li 4 Ti 5 O 12 composite electrodes using spark plasma sintering technique. These sintered binder-free electrodes are self-supported and present a large porosity (40%) with relatively uniform pores. The electrochemical performances of half and full batteries reveal a remarkable specific areal capacity (20 mA h cm -2 ), which is 4 times higher than those of 100 µm thick electrodes present in conventional tape-casted Li–ion batteries (5 mA h cm -2 ). The 3D morphological study is carried out using full field transmission X-ray microscopy in microcomputed tomography mode to obtain tortuosity values and pore size distributions leading to a strong correlation with their electrochemical properties. These results also demonstrate that the coupling between the salt templating method and the spark plasma sintering technique turns out to be a promising way to fabricate thick electrodes with high energy density.

25 ENERGY STORAGE↗

Dependence of ion-cyclotron range of frequencies instabilities on species mix and fast-ion distribution: III. Novel sub-cyclotron modes

Dedicated DIII-D experiments studied instabilities above and below the ion cyclotron frequency by injecting thirteen different neutral beam populations into L-mode plasmas with different thermal compositions of H, D, and 3 He at five different values of toroidal field. Two companion papers describe the results of these experiments in detail. This paper focuses on data and analysis of two instabilities that occur at ${\sim}0.6$ of the deuterium and hydrogen cyclotron frequencies $f_\mathrm {cD}$ and $f_\mathrm {cH}$ in mixed hydrogen and deuterium plasmas. The modes below $f_\mathrm {cD}$ are often driven unstable by deuterium beams but are rarely destabilized by hydrogen beams. The modes below $f_\mathrm {CD}$ are reported here for the first time in a fusion plasma. These $\mathrm{sub-}f_\mathrm {cH}$ modes are only driven by deuterium beams but, unlike the $\mathrm{sub-}f_\mathrm {cD}$ modes, they are only unstable in plasmas with deuterium concentrations that are ${\lesssim}20\%$; they also have a smaller amplitude than the sub-deuterium modes. Addition of fully-ionized 3 He to the plasma has little effect on the sub-cyclotron deuterium modes but is stabilizing for the sub-cyclotron hydrogen modes. The modes are excited in the core and have toroidal mode numbers around 20. These trends are compared with calculations of the growth rate in a simplified model. The theory successfully predicts global Alfvén eigenmode instability with frequencies and mode numbers close to experimental values, the stronger amplitude of the sub-deuterium modes, and the species-mix dependence of the sub-hydrogen modes. Increased damping associated with the ion-ion hybrid, cutoff, and crossover frequencies plausibly accounts for the stabilization of the $\mathrm{sub-}f_\mathrm {cH}$ modes when 3 He is puffed. However, the relative stability of $\mathrm{sub-}f_\mathrm {cH}$ modes during hydrogen injection remains unexplained.

electromagnetic ion cyclotron instability↗

Plasma Diagnostics by Antenna Impedance Measurements

The impedance of an electrically short antenna immersed in a plasma provides an excellent in situ diagnostic tool for electron density and other plasma parameters. By electrically short we mean that the wavelength of the free-space electromagnetic wave that would be excited at the driving frequency is much longer than the physical size of the antenna. Probes using this impedance technique have had a long history with sounding rockets and satellites, stretching back to the early 1960s. This active technique could provide information on composition and temperature of plasmas for comet or planetary missions. Advantages of the impedance probe technique are discussed and two classes of instruments built and flown by SDL-USU for determining electron density (the capacitance and plasma frequency probes) are described.

Swenson, C. M.↗

Spark Plasma Sintering of high-density fine-grained Y2.5Nd0.5Al5O12+SiC composite ceramics

Highlights: • YAG + (10, 20) wt.% α-SiC high-density ceramics obtained by SPS. • YAG + α-SiC ceramics have a more fine-grained structure than pure garnet. • The optimal sintering temperature of YAG + SiC ceramics is lower than that of garnet. • Introduction of α-SiC particles creates internal stress fields in garnet. • Introduction of α-SiC particles results in lower sintering activation energy of garnet. - Abstract: Spark Plasma Sintering (SPS) has been used to produce samples of fine-grained composites Y{sub 2.5}Nd{sub 0.5}Al{sub 5}O{sub 12} + x wt.% α-SiC (x = 1020) with ∼98–99% density. The microstructure of the composites has been studied, as well as the impact of α-SiC particles on the mechanical properties and kinetics of composite sintering. The introduction of the α-SiC part has been demonstrated to form a more fine-grained structure and under the given SPS conditions change the sintering mechanism in ceramics. The study has also demonstrated that introduction of α-SiC particles into garnet results in formation of internal stress fields, which, in turn, leads to a decrease in the activation energy of sintering of fine-grained composites at high temperatures.

36 MATERIALS SCIENCE↗

Transition from gas-kinetic to minimal metal-type conductivity in a supercritical fluid of metal vapor

We have proposed a peculiar model of the plasma of dense metal vapors, containing atoms embedded into the electron jelly, as well as free (thermally ionized) electrons and ions. The main feature of the model is the presence of the electron jelly existing at any density of the atomic component. The number of electrons in the jelly increases under compression. The process of its formation can be called the “cold” ionization, or pressure ionization. The composition of the gas–plasma mixture, including the concentration of atoms and electrons in the jelly, as well as the concentration of free thermally ionized electrons and ions, has been calculated. The conductivity of dense vapors is determined by the sum of the conductivities of thermal electrons (which is calculated using the Frost formula) and jelly electrons (which is calculated by the Regel–Ioffe formula for the minimal metal-type conductivity). The concentration of thermal electrons decreases and the concentration of jelly electrons increases upon compression of the vapor. Accordingly, the conductivity varies from the conductivity of thermal electrons to the conductivity of jelly electrons, continuously passing through the minimum. The calculated values of the conductivity of supercritical metal vapors are in satisfactory agreement with experimental results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanical properties of Al/ω-Al-Cu-Fe composites synthesized by the SPS technique

Highlights: • For the first time, Al/ω-Al-Cu-Fe composites are produced by Spark Plasma Sintering. • Cu diffusion in Al matrix leads to precipitation of θ′-Al{sub 2}Cu. • The σ{sub 0.2%} drop at around 523 K is due to coarsening of θ′-Al{sub 2}Cu precipitates. • At high temperature, load transfer is the main strengthening mechanism. • At low temperature, SPS Al/ω composites have higher σ{sub 0.2%} than HIP Al/ω composites. - Abstract: Al/40 vol%ω-Al-Cu-Fe composites were produced from Al powder and i-Al-Cu-Fe quasi-crystalline particles using spark plasma sintering (SPS) technique. The mechanical properties of the composite were evaluated over the temperature range 293 K–823 K by performing compression tests at constant strain rate. The temperature dependence of the σ{sub 0,2%} yield stress gives evidence of two temperature regimes with a transition in the range 473 K–523 K. The decrease of σ{sub 0,2%} with increasing temperature, more pronounced in the low temperature regime, indicates that the two temperature regimes correspond to two different thermally activated deformation mechanisms. Based on microstructural analyses of the Al matrix, where plastic deformation takes place, the different strengthening contributions are discussed and the results are finally compared to those obtained for composites produced by hot isostatic pressing (HIP), for which the σ{sub 0,2%} temperature dependence is similar. In the low temperature regime, the σ{sub 0.2%} stress of the SPS composites is higher than that of the HIP composites. In this temperature regime, the stress difference is mainly ascribed to the different reinforcement phases present in the Al matrix. In the high temperature regime, the temperature dependence of σ{sub 0.2%} is comparable for the two composites whatever the processing route: load transfer is thus the main strengthening mechanism, which is similar for the two Al/ω-Al-Cu-Fe composites, the temperature dependence being ascribed to cross slip and climb processes.

36 MATERIALS SCIENCE↗

Effect of plasma parameters on characteristics of silicon nitride film deposited by single and dual frequency plasma enhanced chemical vapor deposition

This work investigates the deposition of hydrogenated amorphous silicon nitride films using various low-temperature plasmas. Utilizing radio-frequency (RF, 13.56 MHz) and ultra-high frequency (UHF, 320 MHz) powers, different plasma enhanced chemical vapor deposition processes are conducted in the mixture of reactive N{sub 2}/NH{sub 3}/SiH{sub 4} gases. The processes are extensively characterized using different plasma diagnostic tools to study their plasma and radical generation capabilities. A typical transition of the electron energy distribution function from single- to bi-Maxwellian type is achieved by combining RF and ultra-high powers. Data analysis revealed that the RF/UHF dual frequency power enhances the plasma surface heating and produces hot electron population with relatively low electron temperature and high plasma density. Using various film analysis methods, we have investigated the role of plasma parameters on the compositional, structural, and optical properties of the deposited films to optimize the process conditions. The presented results show that the dual frequency power is effective for enhancing dissociation and ionization of neutrals, which in turn helps in enabling high deposition rate and improving film properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dependence of ion-cyclotron range of frequencies instabilities on species mix and fast-ion distribution: I. Stability

Ion cyclotron emission (ICE) driven by fast ions has the potential to be a reactor relevant diagnostic of confined and escaping fast ions; moreover, controlled experiments in magnetic fusion devices can shed light on similar magnetospheric instabilities below and above the ion cyclotron frequency f ci . Dedicated DIII-D experiments studied instabilities below f ci and at cyclotron harmonics l f ci by injecting thirteen different neutral beam populations into plasmas with different thermal compositions of H, D, and 3He at five different values of toroidal field. High-frequency magnetic loops diagnose mode properties. Each beam type is individually injected for an approximate slowing-down time (~100 ms), resulting in a database of 2529 conditions that are analyzed in frequency bands corresponding to ICE harmonics and < f ci global Alfvén eigenmodes. The sub-cyclotron modes are more unstable at low field and in plasmas with large H concentration. For D injection, first harmonic ICE at f cD is more unstable in hydrogen plasmas but, for H injection, the converse is true (ICE at f cH is more unstable in D), suggesting that thermal same-species ions damp fundamental ICE. ICE stability also depends upon the pitch-angle anisotropy gradient and upon the ‘bump-on-tail’ gradient ∂f/∂v. Although the frequency of unstable ICE in these plasmas always occurs near the central cyclotron frequency, the precise value also depends on the Alfvén speed and beam direction, consistent with the idea that instability occurs for modes that simultaneously satisfy ω ≃ 2πlf ci , the magnetosonic dispersion relation, and the Doppler-shifted resonance condition.

electromagnetic ion cyclotron instabilities↗

Tribological properties of PM212: A high-temperature, self-lubricating, powder metallurgy composite

This paper describes a research program to develop and evaluate a new high temperature, self-lubricating powder metallurgy composite, PM212. PM212 has the same composition as the plasma-sprayed coating, PS212, which contains 70 wt percent metal-bonded chromium carbide, 15 wt percent silver and 15 wt percent barium fluoride/calcium fluoride eutectic. The carbide acts as a wear resistant matrix and the silver and fluorides act as low and high temperature lubricants, respectively. The material is prepared by sequential cold press, cold isostatic pressing and sintering techniques. In this study, hemispherically tipped wear pins of PM212 were prepared and slid against superalloy disks at temperatures from 25 to 850 C in air in a pin-on-disk tribometer. Friction coefficients range from 0.29 to 0.38 and the wear of both the composite pins and superalloy disks was moderate to low in the 10(exp -5) to 10(exp -6) cubic mm/N-m range. Preliminary tests indicate that the material has a compressive strength of at least 130 MPa over the entire temperature range of 25 to 900 C. This material has promise for use as seal inserts, bushings, small inside diameter parts and other applications where plasma-sprayed coatings are impractical or too costly.

Dellacorte, Christopher↗

Tribological properties of PM212 - A high temperature, self-lubricating, powder metallurgy composite

This paper describes a research program to develop and evaluate a new high temperature, self-lubricating powder metallurgy composite, PM212. PM212 has the same composition as the plasma-sprayed coating, PS212, which contains 70 wt percent metal-bonded chromium carbide, 15 wt percent silver and 15 wt percent barium fluoride/calcium fluoride eutectic. The carbide acts as a wear resistant matrix and the silver and fluorides act as low and high temperature lubricants, respectively. The material is prepared by sequential cold press, cold isostatic pressing and sintering techniques. In this study, hemispherically tipped wear pins of PM212 were prepared and slid against superalloy disks at temperatures from 25 to 850 C in air in a pin-on-disk tribometer. Friction coefficients range from 0.29 to 0.38 and the wear of both the composite pins and superalloy disks was moderate to low in the 10(exp -5) to 10(exp -6) cubic mm/N-m range. Preliminary tests indicate that the material has a compressive strength of at least 130 MPa over the entire temperature range of 25 to 900 C. This material has promise for use as seal inserts, bushings, small inside diameter parts and other applications where plasma-sprayed coatings are impractical or too costly.

Dellacorte, Christopher↗

Upgraded multipulse laser and multipoint Thomson scattering diagnostics on EAST

Recently a new Thomson scattering diagnostic system was upgraded in EAST tokamak experiment using a multipulse Nd:YAG (neodymium--yttrium aluminium garnet) laser and a multipoint observation volumes. This diagnostic uses a new optical laser alignment technique that was made to determine accurately the laser position, and a new lens collection system that enables the measurement of wider plasma's object. A composite control system made we can get the results in several seconds. Furthermore, a new data processing method was adopted for much exact results.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Validation of full-wave simulations for mode conversion of waves in the ion cyclotron range of frequencies with phase contrast imaging in Alcator C-Mod

Mode conversion of fast waves in the ion cyclotron range of frequencies (ICRF) is known to result in current drive and flow drive under optimised conditions, which may be utilized to control plasma profiles and improve fusion plasma performance. To describe these processes accurately in a realistic toroidal geometry, numerical simulations are essential. Quantitative comparison of these simulations and the actual experimental measurements is important to validate their predictions and to evaluate their limitations. The phase contrast imaging (PCI) diagnostic has been used to directly detect the ICRF waves in the Alcator C-Mod tokamak. The measurements have been compared with full-wave simulations through a synthetic diagnostic technique. Recently, the frequency response of the PCI detector array on Alcator C-Mod was recalibrated, which greatly improved the comparison between the measurements and the simulations. In this study, mode converted waves for D-{sup 3}He and D-H plasmas with various ion species compositions were re-analyzed with the new calibration. For the minority heating cases, self-consistent electric fields and a minority ion distribution function were simulated by iterating a full-wave code and a Fokker-Planck code. The simulated mode converted wave intensity was in quite reasonable agreement with the measurements close to the antenna, but discrepancies remain for comparison at larger distances.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma-neutral interaction processes in the magnetosphere of Saturn

Models of Saturnian magnetospheric processes are reviewed emphasizing the interaction of charged and neutral particles in the gaseous phase and mentioning the role of solid matter. It is found that interpretations of different Voyager datasets regarding the Saturnian magnetosphere can vary. Specific interactions examined to resolve these discrepancies include charge exchange, ion-atom interchange, isotropizing and thermalizing collisions, and interactions between magnetospheric charged particles and surface layers of the icy satellites. The latter interactions result in sputtering of the surface or atmosphere as well as neutral injections into the magnetosphere. Constraints based on known reaction rates are shown to be useful in analyzing the abundances of the water-group molecules. The composition of the magnetospheric plasma is shown to be related to the differences between the interactions of atomic and molecular plasmas with neutral matter.

Eviatar, Aharon↗

Near-Infrared InGaN Alloys Grown on High-In-Composition InGaN Buffer Layer

Near-infrared InGaN alloys were grown on a strain-relaxed high-In-composition InGaN buffer layer based on GaN/sapphire substrate by plasma assisted molecular beam epitaxy. The In compositions of the InGaN light emitting layer and buffer layer determined by X-ray diffraction analysis are 56.7 and 61.1%, respectively. Transmission electron microscopy result shows that no dislocations newly generated at the interface of the InGaN structure layer and the underlying InGaN buffer layer can be observed obviously. The cathodoluminescence spectra exhibit two strong emission peaks at the near-infrared wavelengths of 1090 and 1200 nm, which can be attributed to intrinsic transition and recombination processes of the fabricated InGaN alloys according to the calculation using the energy versus composition equation with a reasonable bowing parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spark plasma sintering of structure-tailored ultrahigh-temperature components: First step to complex net shaping

The net-shaping capability in spark plasma sintering (SPS) of ultrahigh-temperature ceramics has been explored in this study. The annular or ring-like shape is considered here as the first step to a more complex geometry compared to a solid cylinder or disk. ZrC powders have been SPS processed in specially designed graphite tooling to achieve the annular shape geometry. Experimental runs have been carried out to determine the optimal processing parameters for producing highly dense ZrC specimens in this geometry. Finite-element modeling framework has been constructed to determine the internal stress evolution, as well as densification, during the SPS of the annular-shaped ZrC. The formulated processing schemes for ZrC have been adapted to process SiC/ZrB2 composite powder with the purpose of making tooling components for SPS applications. The applicability of the obtained composite SPS tooling has been evaluated at high temperature and high pressure associated with SPS regimes.

36 MATERIALS SCIENCE↗

Plasma-catalyst modeling for materials selection: challenges and opportunities in nitrogen oxidation

Reliable kinetic models are essential to rationalize observations and to guide the selection of appropriate plasma-catalyst combinations. Kinetic models coupling plasma- and heterogeneous-catalytic-chemistries, however, are primitive. Here, we combine reduced plasma chemistries and density functional theory parameterized surface reactions to model NO formation from N2 oxidation, an alternative nitrogen fixation process. We first show plasma excited species can enhance turnover frequencies of both Pt and Au. The enhancing potential is a function of plasma species and their densities. We then compare NO production between plasma/Pt and plasma/Au with an integral reactor model and explore the dependence of NO production as a function of plasma conditions, reactor configurations and chemical compositions. Plasma/Pt generates more NO than plasma/Au under most thermal and plasma parametric conditions. Plasma/Au outperforms plasma/Pt under high plasma excitations at low temperatures. Furthermore, these results highlight that selection of plasma-catalyst combinations should consider the properties of plasmas, materials and the coupling of the two.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The influence of fusion-relevant D 2 -0.1He plasma on Be-W mixed-materials

We report compositionally homogeneous mixed-material layers of Be and W, ∼2 μm thick, and of various W contents (spanning 0–100 at.% W), are produced by thermionic vacuum arc deposition. The layers are exposed to low energy (∼50 eV), high ion flux (6–8 × 10 22 m −2 s −1 ) D 2 -0.1He (10% He) mixed species plasma at 473 K and 1073 K to simulate ITER-like first wall and divertor plasma-material interaction. Surface morphological and compositional analysis is conducted prior and subsequent to plasma exposure. The action of the plasma produces almost complete depletion of Be from the near surface, and this is found regardless of the exposure temperature or initial composition. In the exposure case of 473 K, thermal desorption spectrometry reveals decreased D retention in W rich compositions compared to similar exposure in D 2 plasma without He, but no discernable difference is noted in Be rich compositions. At 1073 K, surface enrichment in W, by depletion of the Be, results in He induced W “fuzz” structures for all Be-W compositions explored.

36 MATERIALS SCIENCE↗

Spatial profile of argon (1s 5 ) metastables in an electron beam generated plasma

Electron beams with an applied magnetic field generate a secondary cold plasma with a selective chemical composition, featuring low-energy ions and metastable species in the discharge periphery, ideal for low-damage plasma treatment of material substrates. In this work, we studied the plasma generated by an e-beam using a 4 kV voltage in a pure argon gas environment under a magnetic field of 150 G and in the pressure range of 25–90 mTorr. We measured the absolute spatial density profile of argon (1 s 5 ) metastables in an electron beam generated plasma by laser-induced fluorescence and found it to be of the order of 10 16 m −3 . The electron temperature and the electron density measured by a Langmuir probe were of the order of 10 16 m −3 and less than an eV respectively. Electron-impact quenching was identified as a significant loss mechanism for the Ar(1s 5 ) state, leading to the saturation of the metastable density at higher pressures. Outside the primary ionization region, the spatial distribution of argon metastables followed a linear diffusion profile, indicating negligible additional production in those regions.

EEDF↗