Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Unconventional transformation of spin Dirac phase across a topological quantum phase transition

The topology of a topological material can be encoded in its surface states. These surface states can only be removed by a bulk topological quantum phase transition into a trivial phase. Here we use photoemission spectroscopy to image the formation of protected surface states in a topological insulator as we chemically tune the system through a topological transition. Surprisingly, we discover an exotic spin-momentum locked, gapped surface state in the trivial phase that shares many important properties with the actual topological surface state in anticipation of the change of topology. Using a spin-resolved measurement, we show that apart from a surface bandgap these states develop spin textures similar to the topological surface states well before the transition. Our results provide a general paradigm for understanding how surface states in topological phases arise from a quantum phase transition and are suggestive for the future realization of Weyl arcs, condensed matter supersymmetry and other fascinating phenomena in the vicinity of a quantum criticality.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compact nanomechanical plasmonic phase modulators [Ultracompact nano-mechanical plasmonic phase modulators]

Highly confined optical energy in plasmonic devices is advancing miniaturization in photonics. However, for mode sizes approaching ≈10 nm, the energy increasingly shifts into the metal, raising losses and hindering active phase modulation. Here, we propose a nanoelectromechanical phase-modulation principle exploiting the extraordinarily strong dependence of the phase velocity of metal–insulator–metal gap plasmons on dynamically variable gap size. We experimentally demonstrate a 23-μm-long non-resonant modulator having a 1.5π rad range, with 1.7 dB excess loss at 780 nm. Analysis shows that by simultaneously decreasing the gap, length and width, an ultracompact-footprint π rad phase modulator can be realized. This is achieved without incurring the extra loss expected for plasmons confined in a decreasing gap, because the increasing phase-modulation strength from a narrowing gap offsets rising propagation losses. Here, such small, high-density electrically controllable components may find applications in optical switch fabrics and reconfigurable plasmonic optics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase transition induced strain in ZnO under high pressure

Under high pressure, the phase transition mechanism and mechanical property of material are supposed to be largely associated with the transformation induced elastic strain. However, the experimental evidences for such strain are scanty. The elastic and plastic properties of ZnO, a leading material for applications in chemical sensor, catalyst, and optical thin coatings, were determined using in situ high pressure synchrotron axial and radial x-ray diffraction. The abnormal elastic behaviors of selected lattice planes of ZnO during phase transition revealed the existence of internal elastic strain, which arise from the lattice misfit between wurtzite and rocksalt phase. Furthermore, the strength decrease of ZnO during phase transition under non-hydrostatic pressure was observed and could be attributed to such internal elastic strain, unveiling the relationship between pressure induced internal strain and mechanical property of material. Ultimately, these findings are of fundamental importance to understanding the mechanism of phase transition and the properties of materials under pressure.

36 MATERIALS SCIENCE↗

Structural phase transformation and Fe valence evolution in FeOxF2-x/C nanocomposite electrodes during lithiation and de-lithiation processes

In this study, the structural changes of FeOxF2-x/C during the first discharge and recharge cycles were studied by ex situ electron microscopy techniques including annular dark field scanning transmission electron microscopy (DF-STEM) imaging, selected area electron diffraction (SAED) and electron energy loss spectroscopy (EELS) as well as by in situ X-ray absorption spectroscopy (XAS). The evolution of the valence state of Fe was determined by combined EELS using the Fe-L edge and XAS using the Fe-K edge. The results of this investigation show that the conversion reaction path during 1st lithiation is very different from the re-conversion path during 1st delithiation. During lithiation, intercalation is first observed followed by conversion into a lithiated rocksalt (Li–Fe–O–F) structure, and metallic Fe and LiF phases. During delithiation, the rocksalt phase does not disappear, but co-exists with an amorphous (rutile type) phase formed initially by the reaction of LiF and Fe. However, a de-intercalation stage is still observed at the end of reconversion similar to a single phase process despite the coexistence of these two (rocksalt and amorphous) phases.

36 MATERIALS SCIENCE↗

Phase Transformations among TiO2 Polymorphs

Polymorphs widely exist in nature and synthetic systems and are well known to determine material properties. Understanding phase transformation mechanisms among polymorphs enables the design of structures and tuning of phases to tailor material properties. However, current understanding is limited due to the lack of direct observations that track the processes and the structural evolution is not known at atomic scale. Here, integrating (semi) in situ transmission electron microscopy and density functional theory, we report atomic structural evolutions of phase transformation from anatase (A) to rutile (R), brookite (B), R-phase, and TiO. Besides the consistent paths with previous reports, we discover several unreported paths, including a [001] direction and (020) plane of anatase to [100]A and (011)R of rutile, respectively, ( , ) and , . Density functional theory analysis elucidates atomic structural evolution during the processes and over 16% of Ti-O bonds break and reform during the processes with energy barriers of ~0.7-1.0 eV per TiO2 formula unit. Under electron-beam irradiation, anatase particles transform into TiO2-R phase or TiO at high or room temperature, respectively. We also reveal the anisotropic nature of electron-beam effect, which is seldom discussed: dependence of crystallographic orientation with respect to electron-beam irradiation direction. Understanding the atomic structural evolution sheds light on interpreting and controlling TiO2 polymorphs and interface structures for various applications. The revealed electron-beam effects in our work provide guidance for in situ transmission electron microscopy studies.

Song, Miao↗

Structures of two intermediate phases between the B1 and B2 phases of PbS under high pressure

The structural transitions of PbS were investigated at pressures up to 50 GPa using synchrotron powder and single crystal X-ray diffraction (XRD) methods in diamond anvil cells. We found two intermediate phases between the B1 phase under atmospheric pressure and the B2 phase at 21.1 GPa, which is different to previous reports. The structures of these two intermediate phases were indexed as B27 and B33, respectively. Their structural parameters were investigated using density functional theory (DFT) calculations. Our results provide a new insight into understanding the transition pathway between the B1 and B2 phases in PbS.

36 MATERIALS SCIENCE↗

Transition from a nanocrystalline phase to an amorphous phase in In-Si-O thin films: The correlation between the microstructure and the optical properties

We investigated the structural and optical properties of In-Si-O thin films as the phase abruptly changes from nanocrystalline (nc) to amorphous (a) with increasing Si content. In-Si-O thin films were deposited on Si substrate using a co-sputtering deposition method. The RF power of the In{sub 2}O{sub 3} target was fixed at 100 W, while the power applied to the SiO{sub 2} target was varied between 0 W and 60 W. At the Si = 2.8 at. %, i.e., at the onset of amorphous phase, the optical properties, including the dielectric functions, optical gap energies, and phonon modes, changed abruptly which were triggered by changes in the crystallinity and surface morphology. X-ray diffraction (XRD) spectra showed crystalline (c-) In{sub 2}O{sub 3}-like peaks below Si = 2.2%. Additionally, a broad peak associated with an amorphous (a-) In{sub 2}O{sub 3} phase appeared above 2.8%. However, the Raman spectra of In-Si-O showed very weak peaks associated with c-In{sub 2}O{sub 3} below 2.2%, and then showed a strong Raman peak associated with a-In-Si-O above 2.8%. X-ray photoelectron spectroscopy measurements showed that oxygen vacancy-related peak intensities increased abruptly above Si = 2.8%. The contrasting results of XRD and Raman measurements can be explained as follows: first, the large enhancement in Drude tails in the a-In-Si-O phase was caused by Si-induced amorphization and a large increase in the density of oxygen vacancies in the In-Si-O thin films. Second, the apparently drastic increase of the Raman peak intensity near 364 cm{sup −1} (for amorphous phase, i.e., above Si = 2.8%) is attributed to a disorder-activated infrared mode caused by both the amorphization and the increase in the oxygen vacancy density in In-Si-O thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure tunes electrical resistivity by four orders of magnitude in amorphous Ge[subscript 2]Sb[subscript 2]Te[subscript 5] phase-change memory alloy

Ge-Sb-Te-based phase-change memory is one of the most promising candidates to succeed the current flash memories. The application of phase-change materials for data storage and memory devices takes advantage of the fast phase transition (on the order of nanoseconds) and the large property contrasts (e.g., several orders of magnitude difference in electrical resistivity) between the amorphous and the crystalline states. Despite the importance of Ge-Sb-Te alloys and the intense research they have received, the possible phases in the temperature-pressure diagram, as well as the corresponding structure-property correlations, remain to be systematically explored. In this study, by subjecting the amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} (a-GST) to hydrostatic-like pressure (P), the thermodynamic variable alternative to temperature, we are able to tune its electrical resistivity by several orders of magnitude, similar to the resistivity contrast corresponding to the usually investigated amorphous-to-crystalline (a-GST to rock-salt GST) transition used in current phase-change memories. In particular, the electrical resistivity drops precipitously in the P = 0 to 8 GPa regime. A prominent structural signature representing the underlying evolution in atomic arrangements and bonding in this pressure regime, as revealed by the ab initio molecular dynamics simulations, is the reduction of low-electron-density regions, which contributes to the narrowing of band gap and delocalization of trapped electrons. At P > 8 GPa, we have observed major changes of the average local structures (bond angle and coordination numbers), gradually transforming the a-GST into a high-density, metallic-like state. This high-pressure glass is characterized by local motifs that bear similarities to the body-centered-cubic GST (bcc-GST) it eventually crystallizes into at 28 GPa, and hence represents a bcc-type polyamorph of a-GST.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Following O and OH in He/O 2 and He/H 2 O gas mixtures—from the gas phase through the liquid phase to modifications on a biological sample

Abstract Applied cold atmospheric plasma allows for the controlled delivery of reactive oxygen and nitrogen species tailored for specific applications. Through the manipulation of the plasma parameters, feed gases, and careful consideration of the environment surrounding the treatment target, selective chemistries that preferentially influence the target can be produced and delivered. To demonstrate this, the COST reference microscale atmospheric pressure plasma jet is used to study the generation and transport of O and ⋅ OH from the gas phase through the liquid to the biological model target cysteine. Relative and absolute species densities of ⋅ OH and O are measured in the gas phase through laser induced fluorescence (LIF) and two-photon absorption LIF respectively. The transport of these species is followed into the liquid phase by hydrogen peroxide quantification and visualized by a fluorescence assay. Modifications to the model biological sample cysteine exposed to ⋅ OH and H 2 O 2 dominated chemistry (He/H 2 O (0.25%)) and O dominated chemistry (He/O 2 (0.6%)) is measured by FTIR spectroscopy. The origin of these species that modify cysteine is considered through the use of heavy water (H 2 18 O) and mass spectrometry. It is found that the reaction pathways differ significantly for He/O 2 and He/H 2 O. Hydrogen peroxide is formed mainly in the liquid phase in the presence of a substrate for He/O 2 whereas for He/H 2 O it forms in the gas phase. The liquid chemistry resulting from the He/O 2 admixture mainly targets the sulfur moiety of cysteine for oxidation up to irreversible oxidation states, while He/H 2 O treatment leads preferentially to reversible oxidation products. The more O or OH/H 2 O 2 dominated chemistry produced by the two gas admixtures studied offers the possibility to select species for target modification.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Probabilistic inversion of circular phase spectra: application to two-station phase-velocity dispersion estimation in western Canada

SUMMARY Periodic directional and temporal measurements are common in seismology, and necessitate specific statistical analyses that are appropriate for circular quantities. In this work, we explore the use of a von Mises distribution as a representation of errors on circular seismological observations. Specifically, we automate the estimation of surface-wave phase-velocity dispersion for the teleseismic two-station method, which generally suffers from a 2π phase ambiguity. The use of Bayesian inverse techniques, which aim to rigorously quantify model parameter uncertainty, have become widespread throughout seismology over the last decade. Here, we apply Bayesian inversion to measurements of surface-wave phase spectra in order to estimate 1-D, path-averaged Earth structure between station pairs. The dispersion curve and associated uncertainties are additional results of the inversion, which can then be used as input for subsequent analyses (e.g. tomography). We demonstrate this technique through application to surface-wave recordings from long-running seismic stations throughout western Canada. Our results for over 10 000 station pairs reveal first-order tectonic features consistent with previous studies, which provides confidence in our approach as well as an initial step towards resolving a full 3-D seismic velocity model for the region. This work also presents a foundation for the inversion of surface-wave phase spectra to estimate 3-D Earth structure directly. Finally, the ideas presented in this work are not limited to the inversion of surface-wave phase spectra, but can also be considered for Bayesian geophysical inversion of any circular quantities.

Gosselin, Jeremy M. (ORCID:0000000203754102)↗

Evaluating multistation phase picking algorithm phase neural operator (PhaseNO) on local seismic networks

Reliable automatic phase picking is important for many seismic applications. With the development of machine learning approaches, many algorithms are proposed, evaluated and applied to different areas. Many of these algorithms are single station based, while recent proposed methods start to combine surrounding stations into consideration in the problem of phase picking. Among these algorithms, the phase neural operator (PhaseNO) shows promising results on regional data sets comparing to existing algorithms. But there are many use cases for the local seismic networks in our community, therefore in this paper we evaluate the performance of PhaseNO on four different local data sets and compare the results to PhaseNet and EQTransformer. We used both individual phase picking metrics as well as association metrics to illustrate the performance of PhaseNO. By manually reviewing the newly detected events, we find that the PhaseNO model outperforms the single station-based approaches in the local-scale use cases due to its consideration of coherent signals from multiple stations. We also explored PhaseNO’s behaviours when only using one station, as well as gradually increasing the number of stations in the seismic network to better understand its behaviour. Overall, using the off-the-shelf machine learning based phase pickers, PhaseNO demonstrated its good performance on local-scale seismic networks.

58 GEOSCIENCES↗

Unified band-theoretic description of structural, electronic, and magnetic properties of vanadium dioxide phases

The debate concerning whether the insulating phases of vanadium dioxide (VO 2 ) can be described by band theory or whether it requires a theory of strong electron correlations remains unresolved even after decades of research. Energy-band calculations using hybrid exchange functionals or including self-energy corrections account for the insulating or metallic nature of different phases but have not yet successfully accounted for the observed magnetic orderings. Strongly correlated theories have had limited quantitative success. Here we illustrate that by using hard pseudopotentials and an optimized hybrid exchange functional, the energy gaps and magnetic orderings of both monoclinic VO 2 phases and the metallic nature of the high-temperature rutile phase are consistent with available experimental data, obviating an explicit role for strong correlations. We also identify a potential candidate for the newly found metallic monoclinic phase.

36 MATERIALS SCIENCE↗