Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

New methods for the preparation and dielectric properties of La{sub 2−x}Sr{sub x}NiO{sub 4} (x = 1/8) ceramic

Highlights: • A new fuel in solution combustion synthesis of fine powder La{sub 15/8}Sr{sub 1/8}NiO{sub 4}. • Changes in the morphology of the ceramic La{sub 15/8}Sr{sub 1/8}NiO{sub 4} after thermobaric treatment. • Changes in structural parameters of the La{sub 15/8}Sr{sub 1/8}NiO{sub 4} after thermobaric treatment. • Increase of the dielectric constant of the thermobaric treated ceramic La{sub 15/8}Sr{sub 1/8}NiO{sub 4}. • Using of dielectric modulus and impedance formalisms, of equivalent circuits method. - Abstract: The perovskite-type oxide La{sub 2−x}Sr{sub x}NiO{sub 4} (x = 1/8) was prepared by a new precursor route. The reaction proceeds in the self-ignition mode. Single-phase powder and gas-tight ceramic samples can be produced by single annealing of decomposition products. It was shown that as a result of thermobaric treatment of La{sub 2−x}Sr{sub x}NiO{sub 4} (x = 1/8) the solid solution La{sub 2−x}Sr{sub x}NiO{sub 4} with a higher concentration of strontium and the second phase La{sub 3}Ni{sub 2}O{sub 7} are formed. Short-term (5 min) thermobaric treatment (P = 2.5 GPa) at t° = 900 °C changes the unit cell parameters, but is not accompanied by structural transitions. At the same time, morphological restructuring of the sample occurs—the agglomerates delaminate into thin plates crystals. It was established that the permittivity of the material exposed to thermobaric treatment is much higher compared to that of the sample annealed at atmospheric pressure and virtually does not depend on frequency in a wide temperature range.

36 MATERIALS SCIENCE↗

Structural, morphological and dielectric properties of BiNbO{sub 4} ceramics prepared by the sol-gel method

Highlights: • The thermal treatment at 1200 °C generates a non-stoichiometric secondary phase. • The secondary phase Bi{sub 3.54}Nb{sub 7.09}O{sub 22.7}, is responsible for the highest Q × f and density. • The samples with triclinic BiNbO{sub 4} have the highest ε′. - Abstract: BiNbO{sub 4} ceramic powders were prepared using the sol-gel method. The fine particles were pressed into cylinders and, then, they were treated at temperatures between 500 and 1150 °C. The structure was studied by X-ray diffraction and Raman spectroscopy and the morphology was observed by scanning electron microscopy. The measurements of the complex permittivity were made in a resonant cavity operating at 2.7 GHz, using the small perturbation method. The reversible phase transformation between β-BiNbO{sub 4} and α-BiNbO{sub 4} was observed. The density, dielectric constant (ε') and the dielectric loss (tg δ) of the prepared powders increase with the sintering temperature, and the sample treated at 1150 °C shows the highest ε' and the highest Q × f.

36 MATERIALS SCIENCE↗

Crystal structure and dielectric properties of a new Na2O-Nd2O3-CeO2 ceramic system at microwave frequencies

Highlights: • A large amount of Na evaporation can make τ{sub f} more negative in present ceramics. • Na-excess evaporation results in the formation of Ce{sub 1-x}Nd{sub x}O{sub 2-x/2} solid solution. • Ce{sub 1-x}Nd{sub x}O{sub 2-x/2} (x = 0.25 and 0.5) solid solutions belong to the same fluorite-type. - Abstract: Na{sub 2}O-Nd{sub 2}O{sub 3}-CeO{sub 2} ceramic systems of the form Na{sub 3x−1}Nd{sub 1−x}CeO{sub 3} (x = 0.4, 0.5, and 0.6) were prepared via a solid-state reaction method. X-ray diffraction analyses indicated that the samples with x = 0.4, 0.6 and those with x = 0.5 formed Nd{sub 0.25}Ce{sub 0.75}O{sub 1.875} and Nd{sub 0.5}Ce{sub 0.5}O{sub 1.75} solid solutions, respectively, which resulted from a large degree of Na{sup +} ion evaporation. Both the Nd{sub 0.25}Ce{sub 0.75}O{sub 1.875} and Nd{sub 0.5}Ce{sub 0.5}O{sub 1.75} phases belonged to the same cubic structure with an Fm-3m (225) space group. Additionally, the microstructures, sintering behaviors, and microwave dielectric properties were considered to be strongly related to the Na content in the Na{sub 3x−1}Nd{sub 1−x}CeO{sub 3} ceramics. A relatively large degree of Na{sup +} ion evaporation could increase the negative temperature coefficient of the resonant frequency (τ{sub f}) for these ceramic systems. Moreover, after sintering at 1380 °C for 2 h, the x = 0.6 specimen possessed a low permittivity (ε{sub r}) of approximately 9.13, a moderate quality factor (Q × f) of approximately 23,800 GHz (at 9.14 GHz) and a negative τ{sub f} value of approximately −61.7 ppm/°C. As a result, it could be a promising microwave dielectric material for achieving a near-zero τ{sub f} value by solidifying one or more microwave dielectric ceramics with a high positive τ{sub f} value.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave absorption behavior and electromagnetic properties of Ni-Zr doped La-Sr hexagonal ferrite synthesized by auto-combustion method

Highlights: • Quantitative analysis of Microwave Absorption for synthesized ferrites. • Maximum absorption was successfully predicted from quarter-wavelength method. • Minimum RL = −25.07 dB with 1.25 GHz bandwidth for composition x = 0.75. • Better gross loss tangent and Microwave Absorption in Ku-band. • Synthesized ferrites can be used as thin or thick sheet of microwave absorber. - Abstract: Strontium hexagonal ferrites with compositional formula Sr{sub 0.85}La{sub 0.15}(NiZr){sub x}Fe{sub 12-2x}O{sub 19}, where ‘x’ varies from 0.00 to 1.00 in steps of 0.25, were synthesized by auto-combustion method. Structural, magnetic, electromagnetic and microwave absorption properties of synthesized ferrites were studied. The vector network analyzer (VNA) was used to measure complex permittivity (ε′–jε′′) and complex permeability (μ′–jμ′′) in X-band (8–12.4 GHz) and Ku-band (12.4–18 GHz) frequency range. The minimum reflection loss curves were obtained using back metal plate method for analyzing absorption properties of the material. All the synthesized ferrites show maximum absorption in Ku-band for sample thickness in the range of 1.6–1.68 mm. These newly synthesized ferrites have great potential to be used as thin microwave absorber sheets with minimum reflection loss values in the range of –19.69 dB to −27.8 dB and bandwidth in the range of 680 MHz–1.25 GHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low loss polypropylene-silicon composites for millimetre wave applications

Highlights: • Developed polypropylene-silicon composite. • The composite shows a decrease in loss tangent with increasing frequency. • The composite is useful for high frequency applications such as Internet of Things and 5th Generation wireless communication. - Abstract: Polypropylene-silicon composite laminates were fabricated via hot pressing and their dielectric properties up to 35 GHz were studied. The loss tangent was found to decrease with increasing frequency whereas an increasing trend of loss tangent has previously been reported in the literature for such composites. The decreasing trend of the loss tangent with frequency is due to the decreasing conductor loss of silicon (Si) and indicates the possibility for use in high frequency applications such as the Internet Of Things and 5 t h generation wireless communication. The composite containing 25 vol% of Si had a relative permittivity of 3.5 and a loss tangent of 0.001 at 35 GHz. The coefficient of thermal expansion and the thermal conductivity of 40 vol% Si loaded composites were 51 ppm/{sup o}C and 2.23 W/mK, respectively. The thermal conductivity of the composite increased by 163% and 913% for 25 and 40 vol% Si addition, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal strain-induced dielectric anisotropy in Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} thin films grown on silicon-based substrates

Dielectric properties of Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} (BST) thin films, which were prepared on silicon-based substrates by ion beam sputtering and postdeposition annealing method, were systematically investigated in different electrode configurations of metal-insulator-metal and coplanar interdigital capacitors. It was found that a large dielectric anisotropy exists in the films with better in-plane dielectric properties (higher dielectric permittivity and tunability) than those along the out-of-plane direction. The observed anisotropic dielectric responses are explained qualitatively in terms of a thermal strain effect that is related to dissimilar film strains along the in-plane and out-of-plane directions. Another reason for the dielectric anisotropy is due to different influences of the interfacial low-dielectric layer between the BST film and the substrate (metal electrode).

36 MATERIALS SCIENCE↗

Dielectric and nonlinear electrical behaviors of La-doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics

We prepared La doped of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics by a solid-state sintering process and observed nonlinear electrical varistor and high dielectric behaviors. Phase composition analyses show that the La can substitute on the Ca sites completely, and have no influence on the phase composition. The impedance spectroscopy at room temperature indicates that the La doping can maintain the dielectric permittivity of CaCu{sub 3}Ti{sub 4}O{sub 12} (approx10{sup 4}). The relationships between electrical current density versus applied electrical field show that these ceramic samples exhibit nonlinear varistor characteristics, which should be ascribed to the existing potential barrier height at the grain boundary.

36 MATERIALS SCIENCE↗

Characterization of Lead-Free B{sub 2}O{sub 3} Doped Barium Stannate Titanate Ceramics

Lead-free barium stannate titanate ceramics doped with 2 wt% of B{sub 2}O{sub 3} were prepared via a solid state sintering. The optimum condition for the preparation was carried out. Properties of the lead free material were characterized by various methods. The high dielectric constant >14000 with low tan delta 0.040 was observed at 34 deg. C for the samples prepared at the optimum condition. Plots of dielectric permittivity as a function of temperature showed that the ceramics exhibit a diffuse ferroelectric-paraelectric phase transition. The dielectric constant was also measured as a function of electric field. The dielectric-electric field measurement indicated that this material exhibits a high tunability. In addition, mechanical property such as hardness was investigated. Relation between grain size and hardness of the ceramics was found to obey the Hall-Petch equation: H{sub v} = 0.07+12.9G{sup -(1/2)}.

36 MATERIALS SCIENCE↗

Electrical Properties and Phase Transition Behaviors of Sn Doped 0.45PZT-0.55PNN Ceramics

Dielectric properties, and phase transition behaviors of Sn doped 0.45PbZr{sub 1/2}Ti{sub 1/2}O{sub 3}--0.55PbNi{sub 1/3}Nb{sub 2/3}O{sub 3} ceramics has been investigated. The ceramics were prepared by a normal solid-state method and were characterized, using a variety of techniques. For undoped samples, high relative permittivity of >21000 (at 1 k Hz) was found at the transition temperature of 104 deg. C. With increasing Sn concentration, the degree of diffuse phase transition was enhanced and a linear reduction in the transition temperature was produced.

36 MATERIALS SCIENCE↗

Ultrashort laser pulse absorption and target heating

The problem of ultrashort laser pulse absorption at the sharp plasma-vacuum interface has been solved using a new expression for plasma permittivity. The electron response includes both collisional and collisionless dissipative effects in a plasma with arbitrary ion charge. The difference between known absorption models and our theoretical RFBR approach which accounts for localized plasma heating with nonlocal heat transport has been discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of dielectric dispersion of BaTiO{sub 3} ceramics in the gigahertz frequency region by scattering parameter measurement using a pair of surface electrodes

A measurement method is proposed for observing dielectric dispersion of ferroelectric ceramics in the gigahertz region. This method is based on scattering parameter (S{sub 11}) measurements using a pair of electrodes. Using this method, relaxation-type dielectric dispersion of BaTiO{sub 3} ceramics is observed in the range from 100 MHz to 20 GHz. The relaxation frequency shifts to lower frequencies with larger grain size. In coarse-grain BaTiO{sub 3} ceramics, two peaks of the imaginary part of permittivity are observed, depending on the amount of time after thermal treatment. The contribution of the ferroelectric domain and ionic vibration to the dielectric dispersion is discussed.

36 MATERIALS SCIENCE↗

Influence of combined external stress and electric field on electric properties of 0.5% Fe-doped lead zirconate titanate ceramics

Influence of uniaxial pressure (0-1000 bars) applied parallel to or perpendicularly to the ac or dc electric field (in one-dimensional or two-dimensional manner) on dielectric and ferroelectric properties of hard lead zirconate titanate (PZT) ceramics were investigated. The experimental results revealed that applying uniaxial pressure leads to a reduction in the peak intensity of the electric permittivity (epsilon), of the frequency dispersion as well as of the dielectric hysteresis. Moreover, with increasing pressure the peak intensity of epsilon becomes diffused and shifts to a higher temperature. It was also found that simultaneous application of uniaxial pressure and electric field (perpendicular to each other) in the poling process improves the ferroelectric properties. This indeed indicates new possibility for poling materials with a high coercive field and/or high electric conductivity. The effects of uniaxial load are weaker than that obtained for soft PZT ceramics. It was concluded that applying uniaxial pressure induces similar effects as increasing the Ti ion concentration in PZT system. The obtained results were interpreted through Cochran soft mode and domain switching processes under applying of pressure.

36 MATERIALS SCIENCE↗

Application of Block Krylov Subspace Spectral Methods to Maxwell's Equations

Ever since its introduction by Kane Yee over forty years ago, the finite-difference time-domain (FDTD) method has been a widely-used technique for solving the time-dependent Maxwell's equations. This paper presents an alternative approach to these equations in the case of spatially-varying electric permittivity and/or magnetic permeability, based on Krylov subspace spectral (KSS) methods. These methods have previously been applied to the variable-coefficient heat equation and wave equation, and have demonstrated high-order accuracy, as well as stability characteristic of implicit time-stepping schemes, even though KSS methods are explicit. KSS methods for scalar equations compute each Fourier coefficient of the solution using techniques developed by Gene Golub and Gerard Meurant for approximating elements of functions of matrices by Gaussian quadrature in the spectral, rather than physical, domain. We show how they can be generalized to coupled systems of equations, such as Maxwell's equations, by choosing appropriate basis functions that, while induced by this coupling, still allow efficient and robust computation of the Fourier coefficients of each spatial component of the electric and magnetic fields. We also discuss the implementation of appropriate boundary conditions for simulation on infinite computational domains, and how discontinuous coefficients can be handled.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microwave absorption of magnetized hydrogen plasma in carbon nanotubes

A simple model to describe the microwave absorption of magnetized hydrogen plasma embedded inside the carbon nanotubes (CNTs), which were grown by iron-catalyzed high-pressure disproportionation (HiPco), is proposed and analyzed. By using Maxwell equations in conjunction with a general expression of the complex permittivity of magnetized hydrogen plasma in HiPco CNTs, known as the Appleton-Hartree formula, the absorption coefficients of the system for right-hand circularly wave propagation along and across the static magnetic field are obtained. The effects of the continuously changing the electron density, the collision frequency, and the cyclotron frequency on the absorption of the microwave are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electromagnetic Modelling of Dielectric Loads in front of an ICRH ITER Array using TOPICA and HFSS codes for comparison

The antenna scattering (S-matrix) or impedance matrix at location where the antenna is connected to the power system is of crucial importance to assess compliance with power handling requirements and to design the tuning-and-matching system. The electrical behaviour of an Ion Cyclotron Resonance Heating (ICRH) ITER antenna in front of an infinite isotropic load was assessed numerically using the HFSSR and TOPICA codes for comparison. The calculations were performed at 45 MHz, for various thicknesses of the vacuum layer, various relative permittivities {epsilon}' for dielectric medium without losses ({epsilon}'' = 0),{epsilon}' ranging from 81 to 1000 and for various conductive losses {epsilon}'' = {sigma}/{epsilon}{sub 0}{center_dot}{omega}, for electrolyte medium ({epsilon}' = 81),{epsilon}'' ranging from 0 to 1000. The numerical results obtained with TOPICA and HFSS codes show a good overall agreement in case of vacuum, dielectric and electrolyte mediums. The best absorption of the fast magneto-sonic (Alfven) waves into the loads (i.e. the minimum of the module of antenna input reflection coefficient S11) is obtained around {epsilon}' = 400 for dielectric medium and around {epsilon}'' = 400 for electrolyte case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Oxygen migration in TiO{sub 2}-based higher-k gate stacks

We report on the stability of high-permittivity (high-k) TiO{sub 2} films incorporated in metal-oxide-silicon capacitor structures with a TiN metal gate electrode, focusing on oxygen migration. Titanium oxide films are deposited by either Ti sputtering [physical vapor deposition (PVD)] followed by radical shower oxidation or by plasma-enhanced atomic layer deposition (PEALD) from titanium isopropoxide (Ti{l_brace}OCH(CH{sub 3}){sub 2{r_brace}4}) and O{sub 2} plasma. Both PVD and PEALD films result in near-stoichiometric TiO{sub 2} prior to high-temperature annealing. We find that dopant activation anneals of TiO{sub 2}-containing gate stacks at 1000 deg. C cause 5 A or more of additional SiO{sub 2} to be formed at the gate-dielectric/Si-channel interface. Furthermore, we demonstrate for the first time that oxygen released from TiO{sub 2} diffuses through the TiN gate electrode and oxidizes the poly-Si contact. The thickness of this upper SiO{sub 2} layer continues to increase with increasing TiO{sub 2} thickness, while the thickness of the regrown SiO{sub 2} at the gate-dielectric/Si interface saturates. The upper SiO{sub 2} layer degrades gate stack capacitance, and simultaneously the oxygen-deficient TiO{sub x} becomes a poor insulator. In an attempt to mitigate O loss from the TiO{sub 2}, top and bottom Al{sub 2}O{sub 3} layers are added to the TiO{sub 2} gate dielectric as oxygen barriers. However, they are found to be ineffective, due to Al{sub 2}O{sub 3}-TiO{sub 2} interdiffusion during activation annealing. Bottom HfO{sub 2}/Si{sub 3}N{sub 4} interlayers are found to serve as more effective oxygen barriers, reducing, though not preventing, oxygen downdiffusion.

36 MATERIALS SCIENCE↗

Colossal dielectric constant and relaxation behaviors in Pr:SrTiO{sub 3} ceramics

Sr{sub 1-x}Pr{sub x}TiO{sub 3} ceramics (0.00{<=}x{<=}0.03) were prepared by a traditional solid-state reaction method. Two relaxation processes (marked as A and B) of the Sr{sub 0.09}Pr{sub 0.01}TiO{sub 3} ceramics were investigated by analyzing the E{sub a} values obtained from the Arrhenius law. Colossal dielectric constant (CDC) was first obtained in Sr{sub 0.09}Pr{sub 0.01}TiO{sub 3} ceramics, whose permittivity was up to 3000 (1 kHz, room temperature), greater than that of pure SrTiO{sub 3} ceramics and samples with more Pr addition (x=0.02 and 0.03). This CDC behavior was related to the internal barrier layer capacitance mechanism.

36 MATERIALS SCIENCE↗

High temperature lead-free relaxor ferroelectric: Intergrowth Aurivillius phase BaBi{sub 2}Nb{sub 2}O{sub 9}-Bi{sub 4}Ti{sub 3}O{sub 12} ceramics

Intergrowth BaBi{sub 2}Nb{sub 2}O{sub 9}-Bi{sub 4}Ti{sub 3}O{sub 12} (BaBi{sub 6}Ti{sub 3}Nb{sub 2}O{sub 21}) Aurivillius phase ceramic has been found to be a relaxor ferroelectric (RFE) with the highest reported temperature of the maximum of the dielectric permittivity (T{sub m}) of all of the known RFE systems. Dielectric characterization revealed that it has two dielectric anomalies. The first one is a frequency independent broad dielectric constant peak at {approx}280 deg. C, while the second anomaly shows relaxor behavior at 636 deg. C (100 kHz). There is obvious frequency dispersion of dielectric response at room temperature, which is in agreement with dielectric properties of a typical relaxor. Ferroelectric hysteresis loops and a measurable value of piezoelectric constant d{sub 33} confirmed the ferroelectric nature of BaBi{sub 6}Ti{sub 3}Nb{sub 2}O{sub 21} ceramics. The piezoelectric response remained even after annealing at temperatures above 636 deg. C.

36 MATERIALS SCIENCE↗