Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Density functional study on electronic and optical properties of C (or N)-doped cubic cerium dioxide

Density functional calculations were performed on electronic and optical properties of C (or N)-doped cubic cerium dioxide (CeO{sub 2}). When O is replaced by C (or N) in CeO{sub 2}, obvious band-gap (E{sub g}) reduction is observed. Meanwhile, it is interesting to find that the substitutional doping of C (or N) in CeO{sub 2} obviously increases the O 2p-Ce 4f transition intensity and also the refractive index. The increase in the O 2p-Ce 4f transition intensity on going from undoped, N-doped and C-doped CeO{sub 2} was related to the covalent character of the Ce-O bond. Compared with the undoped CeO{sub 2}, the C (or N)-doped CeO{sub 2}, with steep absorption peaks at lower energy, can be used for visible-light absorption applications. - Graphical abstract: By first-principles calculations, it is predicted that substitutional doping of C (or N) in c-CeO{sub 2} lowers E{sub g} and also O 2p-Ce 4f gap, and increases O 2p-Ce 4f transition intensity.

36 MATERIALS SCIENCE↗

Laboratory Studies of the Optical Properties and Condensation Processes of Cosmic Dust Particles

A laboratory facility for levitating single isolated dust particles in an electrodynamics balance has been developing at NASA/Marshall Space Flight Center for conducting a variety of experimental, of astrophysical interest. The objective of this research is to employ this innovative experimental technique for studies of the physical and optical properties of the analogs of cosmic grains of 0.2-10 micron size in a chamber with controlled pressure/temperatures simulating astrophysical environments. In particular, we will carry out three classes of experiments to investigate the microphysics of the analogs of interstellar and interplanetary dust grains. (1) Charge characteristics of micron size single dust grains to determine the photoelectric efficiencies, yields, and equilibrium potentials when exposed to UV radiation. These measurements will provide the much-needed photoelectric emission data relating to individual particles as opposed to that for the bulk materials available so far. (2) Infrared optical properties of dust particles obtained by irradiating the particles with radiation from tunable infrared diode lasers and measuring the scattered radiation. Specifically, the complex refractive indices, the extinction coefficients, the scattering phase functions, and the polarization properties of single dust grains of interest in interstellar environments, in the 1-25 micron spectral region will be determined. (3) Condensation experiments to investigate the deposition of volatile gases on colder nucleated particles in dense interstellar clouds and lower planetary atmospheres. The increase in the mass or m/q ratio due to condensation on the particle will be monitored as a function of the dust particle temperature and the partial pressure of the injected volatile gas. The measured data wild permit determination of the sticking efficiencies of volatile gases of astrophysical interest. Preliminary results based on photoelectric emission experiments on 0.2-6.6 micron size silica particles exposed to UV radiation in the 120-200 nm spectral region will be presented.

Abbas, Mian M.↗

Electronic and optical properties of mixed perovskites CsSn{sub x}Pb{sub (1−x)}I{sub 3}

The electronic structure and optical properties of the new solar cells absorber material: mixed perovskites CsSn{sub x}Pb{sub (1−x)}I{sub 3} are studied by the first-principle calculations with mBJ + SOC (modified Beak Johnson approximation plus spin-orbit coupling) method. The band gap of the serial of compounds almost quasi-linearly reduces with increasing Sn content from 0.96 eV (x = 0) to 0.16 eV (x = 1). Optical absorption coefficient revealed a progressive red shift with the increment of the Sn content, accompanying with the absorption edge broadening. The absorption coefficient and Ideal Power Absorption Coefficient (IPAC) increase greatly with the Pb atoms being partially substituted by Sn atoms. The pure CsSnI{sub 3} has the highest IPAC, but it is unstable in the air because the Sn{sup 2+} will be oxidized to Sn{sup 4+}. So our results indicate that partially substituted CsSn{sub x}Pb{sub (1−x)}I{sub 3} might be the good solar cell absorption material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermophysical and Optical Properties of Materials Considered for Use on the LDSD Test Vehicle

In June 2014, the first of multiple flights in the Low Density Supersonic Decelerator (LDSD) technology development program took place and successfully demonstrated a Supersonic Inflatable Aerodynamic Decelerator (SIAD) in Mars-like conditions. Although the primary goal of the technology program was the development of new decelerators for landing heavier payloads on Mars, the low-cost thermal design of the test vehicle was only possible through the innovative use of a combination of both commercial off the shelf (COTS) and aerospace grade materials. As a result, numerous thermophysical and optical property measurements were undertaken to characterize material candidates before the final material selection was made. This paper presents thermophysical and optical property measurements performed over the course of the LDSD test vehicle development, including those not ultimately selected for use on the vehicle. These properties are compared and contrasted with the existing measurements available in previous literature.

Redmond, Matthew↗

Prediction of tissue optical properties using the Monte Carlo modeling of photon transport in turbid media and integrating spheres

Monte Carlo methods are an established technique for simulating light transport in biological tissue. Integrating spheres make experimental measurements of the reflectance and transmittance of a sample straightforward and inexpensive. This work presents an extension to existing Monte Carlo photon transport methods to simulate integrating sphere experiments. Crosstalk between spheres in dual-sphere experiments is accounted for in the method. Analytical models, previous works on Monte Carlo photon transport, and experimental measurements of a synthetic tissue phantom validate this method. We present two approaches for using this method to back-calculate the optical properties of samples. Experimental and simulation uncertainties are propagated through both methods. Both back-calculation methods find the optical properties of a sample accurately and precisely. Our model is implemented in standard Python 3 and CUDA C++ [J. Nickolls, I. Buck, M. Garland, and K. Skadron, ACM Queue 6 , 40 ( 2008 ) ] and is publicly available in Code 1.

Cook, Patrick D. (ORCID:0000000279345428)↗

High Spectral Resolution Datasets of in Situ Aquatic Inherent and Apparent Optical Properties

Light emerging from natural water bodies and measured by remote sensing radiometers contains information about the local type and concentrations of phytoplankton, non-algal particles and colored dissolved organic matter in the underlying waters. An increase in spectral resolution in forthcoming satellite and airborne remote sensing missions is expected to lead to new or improved capabilities to characterize aquatic ecosystems. Such upcoming missions include NASA’s Plankton, Aerosol, Cloud, ocean Ecosystem PACE Mission; the NASA Surface Biology and Geology observable mission; and NASA Airborne Visible / Infrared Imaging Spectrometer (AVIRIS) - Next Generation airborne missions. In anticipation of these missions, we present a dataset of geographically diverse, quality-controlled, high spectral resolution inherent and apparent optical property (IOP/AOP) aquatic data. The data are intended to be of use to increase our understanding of aquatic optical properties, to develop aquatic remote sensing data product algorithms, and to perform calibration and validation activities for forthcoming aquatic-focused imaging spectrometry missions. The dataset is comprised of contributions from several investigators and investigating teams collected over a range of geographic areas and water types, including inland water, estuaries and oceans. Specific in situ measurements include particulate absorption, particulate attenuation, non-algal particulate or detritus absorption, colored dissolved organic matter absorption, phytoplankton absorption, total absorption, total attenuation, particulate backscattering, total backscatter, remote sensing reflectance, and irradiance reflectance. The dataset can be downloaded from PANGAEA: (https://www.pangaea.de/TBD ).

K A Casey↗

Synthesizing Diacetylenes With Nonlinear Optical Properties

Diacetylene compounds being investigated to determine whether they have nonlinear optical properties making them useful for four-wave mixing, generation of third harmonics, phase conjugation, and like. Diacetylene monomers synthesized by sequences of chemical reactions. Monomers polymerized by ultraviolet light, forming potentially useful nonlinear optical materials.

Mcmanus, Samuel P.↗

Cloud Power Spectra-Dependence on Solar Zenith Angle and Wavelength, Implications for Cloud Optical Property Retrievals

Scale breaks (spatial scales at which power-law exponent changes occur) observed in Landsat radiances have proven to be useful indicators of radiative interactions, and have aided the development of improved techniques in the remote sensing of clouds. This work extends previous theoretical studies to absorbing wavelengths by using both Landsat Thematic Mapper (TM) observations and Monte Carlo (MC) simulations to infer the systematic dependencies of power spectral shape on cloud characteristics, illumination conditions, and wavelength. We show that MC simulations operating on a simple fractal model of horizontally inhomogeneous clouds produce power spectra that qualitatively resemble observed spectra. We also show that the decrease in the spectra power-law exponent seen at intermediate scales (referred to as "roughening") as the Sun becomes more oblique is more pronounced at absorbing wavelengths. An automated procedure designed to detect the small scale break location is unable to find systematic differences between TM Band 4 and Band 7, despite the fact that MC simulations point to systematic differences in horizontal fluxes. The effect of these qualitative characteristics of the spatial spectra on the retrieval of cloud optical properties is examined by comparing power spectra of nadir radiances with power spectra of optical properties retrieved using either traditional Independent Pixel Approximation approaches or modifications based on normalized radiance indices and the inverse Non-local Independent Pixel Approximation. Assuming that the actual cloud properties follow perfect scaling behavior at all scales, we show the improvement of the proposed retrieval modifications.

Oreopoulos, Lazaros↗

Optical properties of quaternary GaN{sub x}As{sub y}P{sub 1-x-y} semiconductor alloys

The optical properties of quaternary GaN{sub x}As{sub y}P{sub 1-x-y} semiconductor alloys grown on a GaP (100) substrate surface are studied by photoluminescence spectroscopy in the temperature range 20-300 K and by photoluminescence excitation spectroscopy at liquid-nitrogen temperature. The measurements are carried out for the GaN{sub x}As{sub y}P{sub 1-x-y} alloys, for which the nitrogen and arsenic molar fractions x and y range from 0.006 to 0.012 and from 0.00 to 0.18, respectively. A comparative analysis of the data is conducted, and the dependences of the energy position of the photoluminescence peak on the composition of the quaternary alloy are established. From the studies of photoluminescence in the range 20-300 K, it is found that the temperature dependence of the position of the photoluminescence peak substantially differs from the behavior described by Varshni's expression.

36 MATERIALS SCIENCE↗

Comparison of Key Absorption and Optical Properties Between Pure and Transported Anthropogenic Dust over East and Central Asia

Asian dust particulate is one of the primary aerosol constituents in the Earth-atmosphere system that exerts profound influences on environmental quality, human health, the marine biogeochemical cycle, and Earth's climate. To date, the absorptive capacity of dust aerosol generated from the Asian desert region is still an open question. In this article, we compile columnar key absorption and optical properties of mineral dust over East and Central Asian areas by utilizing the multiyear quality-assured datasets observed at 13 sites of the Aerosol Robotic Network (AERONET). We identify two types of Asian dust according to threshold criteria from previously published literature. (1) The particles with high aerosol optical depth at 440 nm (AOD(440) > or = 0.4) and a low Angstrom wavelength exponent at 440-870 nm (alpha < 0.2) are defined as Pure Dust (PDU), which decreases disturbance of other non-dust aerosols and keeps high accuracy of pure Asian dust. (2) The particles with AOD(440) > or = 0.4 and 0.2 < alpha < 0.6 are designated as Transported Anthropogenic Dust (TDU), which is mainly dominated by dust aerosol and might mix with other anthropogenic aerosol types. Our results reveal that the primary components of high AOD days are predominantly dust over East and Central Asian regions, even if their variations rely on different sources, distance from the source, emission mechanisms, and meteorological characteristics. The overall mean and standard deviation of single-scattering albedo, asymmetry factor, real part and imaginary part of complex refractive index at 550 nm for Asian PDU are 0.935 +/- 0.014, 0.742 +/- 0.008, 1.526 +/- 0.029, and 0.00226 +/- 0.00056, respectively, while corresponding values are 0.921 +/- 0.021, 0.723 +/- 0.009, 1.521 +/- 0.025, and 0.00364 +/- 0.0014 for Asian TDU. Aerosol shortwave direct radiative effects at the top of the atmosphere (TOA), at the surface (SFC), and in the atmospheric layer (ATM) for Asian PDU (alpha < 0.2) and TDU (0.2 < alpha < 0.6) computed in this study, are a factor of 2 smaller than the results of Optical Properties of Aerosols and Clouds (OPAC) mineral-accumulated (mineral-acc.) and mineral-transported (mineral-tran.) modes. Therefore, we are convinced that our results hold promise for updating and improving accuracies of Asian dust characteristics in present-day remote sensing applications and regional or global climate models.

Bi, Jianrong↗

Optical properties and crystallinity of silver mirrors under a 35 krad cobalt-60 radiation

This study addresses the effects of thin film optical design and environmental radiation on the optical properties of silver mirrors. Different experimental thin film optical designs are selected, and the film stack is built using Macleod's approach. Mirror elements are exposed to the same dose of radiation and their properties are characterized using a spectrophotometer equipped with an integration sphere and an x-ray diffractometer. Spectrophotometric analyses of mirrors exposed to about 35 krad of {sup 60}Co radiations overall show that the B270 glass substrates coated with titanium oxide (TiO{sub 2}), silicon dioxide (SiO{sub 2}), pure chrome, and pure silver effectively reduces radiation damage. The absorption spectrum of the TiO{sub 2} film in the visible region decreases after radiation and displays drifting. As thin metal films comparison, the silver thin film exhibits higher radiation resistance than the chrome thin film. The x-ray diffraction analysis on metal film layers reveals that crystallinity slightly increases when the silver thin film is irradiated.

36 MATERIALS SCIENCE↗

Effect of structure on nonlinear optical properties in CaCu{sub 3}Ti{sub 4}O{sub 12} films

We report the third-order nonlinear optical properties of CaCu{sub 3}Ti{sub 4}O{sub 12} films with different preferred growth orientations on MgO and fused silica substrates. The films have (310)- and (220)-orientation on MgO and fused silica, respectively, due to the lattice-mismatch. Raman spectra further indicate different atom-bonding states in the films. The nonlinear optical measurements show the films possess the same self-defocusing behavior but with different values of nonlinear refraction, and changed signs of nonlinear absorption. The difference of optical nonlinearity in CaCu{sub 3}Ti{sub 4}O{sub 12} films is ascribed to different lattice parameters and intermediate levels induced by structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Influence of Thermodynamic Phase on the Retrieval of Mixed-Phase Cloud Microphysical and Optical Properties in the Visible and Near Infrared Region

Cloud microphysical and optical properties are inferred from the bidirectional reflectances simulated for a single-layered cloud consisting of an external mixture of ice particles and liquid droplets. The reflectances are calculated with a rigorous discrete ordinates radiative transfer model and are functions of the cloud effective particle size, the cloud optical thickness, and the values of the ice fraction in the cloud (i.e., the ratio of ice water content to total water content). In the present light scattering and radiative transfer simulations, the ice fraction is assumed to be vertically homogeneous; the habit (shape) percentage as a function of ice particle size is consistent with that used for the Moderate Resolution Imaging Spectroradiometer (MODIS) operational (Collection 4 and earlier) cloud products; and the surface is assumed to be Lambertian with an albedo of 0.03. Furthermore, error analyses pertaining to the inference of the effective particle sizes and optical thicknesses of mixed-phase clouds are performed. Errors are calculated with respect to the assumption of a cloud containing solely liquid or ice phase particles. The analyses suggest that the effective particle size inferred for a mixed-phase cloud can be underestimated (or overestimated) if pure liquid phase (or pure ice phase) is assumed for the cloud, whereas the corresponding cloud optical thickness can be overestimated (or underestimated).

Lee, Joonsuk↗

A comparative study on the electronic and optical properties of Sb{sub 2}Se{sub 3} thin film

The thin film of Sb{sub 2}Se{sub 3} was deposited by thermal evaporation method and the film was annealed in N{sub 2} flow in a three zone furnace at a temperature of 290°С for 30 min. The structural properties were characterized by scanning electron microscopy (SEM), transmission electron microscopy (ТЕМ), X-ray diffraction (XRD) and Raman spectroscopy, respectively. It is seen that the as-deposited film is amorphous and the annealed film is polycrystalline in nature. The surface of Sb{sub 2}Se{sub 3} film is oxidized with a thickness of 1.15 nm investigated by X-ray photolecetron spectroscopy (XPS) measurement. Spectroscopic ellipsometry (SE) and UV–vis spectroscopy measurements were carried out to study the optical properties of Sb{sub 2}Se{sub 3} film. In addition, the first principles calculations were applied to study the electronic and optical properties of Sb{sub 2}Se{sub 3}. From the theoretical calculation it is seen that Sb{sub 2}Se{sub 3} is intrinsically an indirect band gap semiconductor. Importantly, the experimental band gap is in good agreement with the theoretical band gap. Furthermore, the experimental values of n, k, ε{sub 1}, and ε{sub 2} are much closer to the theoretical results. However, the obtained large dielectric constants and refractive index values suggest that exciton binding energy in Sb{sub 2}Se{sub 3} should be relatively small and an antireflective coating is recommended to enhance the light absorption of Sb{sub 2}Se{sub 3} for thin film solar cells application.

36 MATERIALS SCIENCE↗

Optical properties of Platonic clusters of plasmonic nanoparticles

In the framework of the dipole approximation, we have developed a model of optical properties of a meta-atom consisting of spherical nanoparticles located at the vertices of Platonic solids. Based on the model, we have found and analysed the dynamics of changes in the optical spectra with a change in the length of the edge of a polyhedron. We have observed strong hybridisation and splitting of initially degenerate modes of individual nanoparticles. The obtained results can be used as the basis for the development of an optical nanosensor, which can determine the change in the chemical and biological composition of the environment. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlating Local Compositions and Structures with the Macroscopic Optical Properties of Ce 3+ -Doped CaSc 2 O 4 , an Efficient Green-Emitting Phosphor

Calcium scandate (CaSc 2 O 4 ) substituted with small amounts (<1%) of Ce 3+ is a recently discovered bright-green-emitting phosphor with favorable light absorption and emission properties and robust temperature stability that make it well-suited for solid-state white-lighting applications. Combined analyses of scattering, solid-state nuclear magnetic resonance (NMR), electron paramagnetic resonance (EPR), and photoluminescence measurements establish the compositional and structural origins of the macroscopic optical properties of this phosphor material. Simultaneous refinements of synchrotron X-ray and neutron diffraction data of Ce 3+ -doped CaSc 2 O 4 enable the average crystal structure to be determined, which is shown to correspond to an exceedingly rigid host structure, as corroborated by density functional theory (DFT) calculations. Such structural rigidity leads to high quantum efficiency, which is optimized by the substitution of as little as 0.5 mol % of Ce 3+ for Ca 2+ ions, with higher extents of Ce 3+ substitution leading to decreased photoluminescent quantum yields. Solid-state 43 Ca and 45 Sc magic-angle spinning (MAS) NMR spectra are sensitive to the effects of the paramagnetic Ce 3+ dopant ions on nearby atoms in the host structure and yield evidence for local structural distortions. EPR measurements provide direct insights on structures of the Ce 3+ ions, as a function of Ce 3+ substitution. The combined scattering and spectroscopic analyses yield detailed new understanding of the local and long-range structures of Ce 3+ -doped CaSc 2 O 4 , which account for the sensitive composition-dependent optical properties of this important phosphor material.

36 MATERIALS SCIENCE↗

Size effects on the structural, electronic, and optical properties of (5,0) finite-length carbon nanotube: An ab-initio electronic structure study

We use density functional computations to study the zero temperature structural, electronic, magnetic, and optical properties of (5,0) finite carbon nanotubes (FCNT), with length in the range of 4–44 Å. It is found that the structural and electronic properties of (5,0) FCNTs, in the ground state, converge at a length of about 30 Å, while the excited state properties exhibit long-range edge effects. We discuss that curvature effects enhance energy gap of FCNTs, in contrast to the known trend in the periodic limit. It is seen that compensation of curvature effects in two special small sizes may give rise to spontaneous magnetization. The obtained cohesive energies provide some insights into the effects of environment on the growth of FCNTs. The second-order difference of the total energies reveals an important magic size of about 15 Å. The optical and dynamical magnetic responses of the FCNTs to polarized electromagnetic pulses are studied by time dependent density functional theory. The results show that the static and dynamic magnetic properties mainly come from the edge carbon atoms. The optical absorption properties are described in terms of local field effects and characterized by Casida linear response method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗