Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nonlinear Solvers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

A full potential rotor analysis with wake influence using an inner-outer domain technique

A three-dimensional, quasi-steady, full potential flow solver was adapted to include realistic rotor wake influence for the aerodynamic analysis of helicopter rotors. The method uses an inner/outer domain technique to accommodate wake effects. Nonlinear flow is computed in the inner domain using a finite difference solution method. The wake is modeled using prescribed wake techniques to allow for the inclusion of realistic wake geometries. Portions of the wake passing inside the inner domain are treated using an embedded vortex technique. The procedure couples the wake influence with the inner domain solution in a consistent and efficient solution process. Correlation with measured lifting transonic data in hover and forward flight is shown which demonstrates the merits of the approach.

Egolf, T. A.↗

Efficiency of Mixed-Element USM3D for Benchmark Three-Dimensional Flows

The unstructured, mixed-element, cell-centered, finite-volume flow solver USM3D is enhanced with new capabilities such as line generation for general unstructured grids and optimization of the iterative solver. The efficiency of the new developments is assessed in a massively parallel environment. The assessments are conducted using a baseline method and the recent hierarchical adaptive nonlinear iteration method framework. Three benchmark turbulent flows, namely, a subsonic separated flow around a three-dimensional hemisphere cylinder configuration, a transonic flow around the ONERA M6 wing, and a supersonic flow through a square duct are considered.

Mohagna J Pandya↗

An embedded variable step IMEX scheme for the incompressible Navier–Stokes equations

This report presents a series of implicit–explicit (IMEX) variable stepsize algorithms for the incompressible Navier–Stokes equations (NSE). Here, IMEX means the nonlinear term is treated fully explicitly while the remaining terms are treated implicitly. With the advent of new computer architectures there has been growing demand for low memory solvers of this type. The addition of time adaptivity improves the accuracy and greatly enhances the efficiency of the algorithm. We prove energy stability of an embedded first–second order IMEX pair. For the first order member of the pair, we prove stability for variable stepsizes, and analyze convergence. We believe this to be the first proof of this type for a variable stepsize IMEX scheme for the incompressible NSE. We then define and test a variable stepsize, variable order IMEX scheme using these methods. Our work contributes several firsts for IMEX NSE schemes, including an energy argument and error analysis of a two-step, variable stepsize method, and embedded error estimation for an IMEX multi-step method.

42 ENGINEERING↗

Hybrid Optimization Parallel Search PACKage

HOPSPACK is open source software for solving optimization problems without derivatives. Application problems may have a fully nonlinear objective function, bound constraints, and linear and nonlinear constraints. Problem variables may be continuous, integer-valued, or a mixture of both. The software provides a framework that supports any derivative-free type of solver algorithm. Through the framework, solvers request parallel function evaluation, which may use MPI (multiple machines) or multithreading (multiple processors/cores on one machine). The framework provides a Cache and Pending Cache of saved evaluations that reduces execution time and facilitates restarts. Solvers can dynamically create other algorithms to solve subproblems, a useful technique for handling multiple start points and integer-valued variables. HOPSPACK ships with the Generating Set Search (GSS) algorithm, developed at Sandia as part of the APPSPACK open source software project.

Kolda, Tamara↗

Predicting the Dynamic Behavior of High-Speed Roller Bearings

Computer program developed for solving nonlinear differential equations of motion of high-speed, lightly loaded, cylindrical roller bearing. Program organized into three major parts: Main program, controls input and output; differential equation solver; and subroutines, used to evaluate vector function. Program has capability of performing either twodimensional or three-dimensional simulation.

Conry, T. F.↗

Predicting Transonic Flutter Using Nonlinear Computational Simulations

This paper builds on the computational aeroelastic results published previously and generated in support of the second Aeroelastic Prediction Workshop for the NASA Benchmark Supercritical Wing configuration. The computational results are obtained using FUN3D, an unstructured flow solver developed at the NASA Langley Research Center. Flutter analyses are performed using various aerodynamic models including linear doublet lattice, Euler solutions, Reynolds averaged Navier-Stokes and Delayed Detached Eddy Simulations. The analyses are performed across the transonic Mach range for a range in angle of attack from 0° to 5°, with focus on identifying the transonic dips in the flutter onset boundaries.

Heeg, Jennifer↗

Hybrid Optimization Parallel Search PACKage

HOPSPACK is open source software for solving optimization problems without derivatives. Application problems may have a fully nonlinear objective function, bound constraints, and linear and nonlinear constraints. Problem variables may be continuous, integer-valued, or a mixture of both. The software provides a framework that supports any derivative-free type of solver algorithm. Through the framework, solvers request parallel function evaluation, which may use MPI (multiple machines) or multithreading (multiple processors/cores on one machine). The framework provides a Cache and Pending Cache of saved evaluations that reduces execution time and facilitates restarts. Solvers can dynamically create other algorithms to solve subproblems, a useful technique for handling multiple start points and integer-valued variables. HOPSPACK ships with the Generating Set Search (GSS) algorithm, developed at Sandia as part of the APPSPACK open source software project.

Source record↗

Applications of the Space-Time Conservation Element and Solution Element (CE/SE) Method to Computational Aeroacoustic Benchmark Problems

The Internal Propagation problems, Fan Noise problem, and Turbomachinery Noise problems are solved using the space-time conservation element and solution element (CE/SE) method. The problems in internal propagation problems address the propagation of sound waves through a nozzle. Both the nonlinear and linear quasi 1D Euler equations are solved. Numerical solutions are presented and compared with the analytical solution. The fan noise problem concerns the effect of the sweep angle on the acoustic field generated by the interaction of a convected gust with a cascade of 3D flat plates. A parallel version of the 3D CE/SE Euler solver is developed and employed to obtain numerical solutions for a family of swept flat plates. Numerical solutions for sweep angles of 0, 5, 10, and 15 deg are presented. The turbomachinery problems describe the interaction of a 2D vortical gust with a cascade of flat-plate airfoils with/without a downstream moving grid. The 2D nonlinear Euler Equations are solved and the converged numerical solutions are presented and compared with the corresponding analytical solution. All the comparisons demonstrate that the CE/SE method is capable of solving aeroacoustic problems with/without shock waves in a simple and efficient manner. Furthermore, the simple non-reflecting boundary condition used in the CE/SE method which is not based on the characteristic theory works very well in 1D, 2D and 3D problems.

Wang, Xiao-Yen↗

Applying Time-Parallelization to Turbulent Flows

Parallelization of the temporal domain is explored for the solution of turbulent flows. Multigrid reduction-in-time (MGRIT) is used to advance the large-scale fluid dynamics in time sequentially on the coarsest space-time grid but propagate the information in time parallel on all other levels. The goal of this process is to accurately and efficiently resolve the coarse-scale turbulence structure and use that to drive the fine-scales of the turbulent flow. The extra forcing from nonlinear multigrid facilitates the coupling and interaction between fine and coarse scales, through which the multiscale nonlinear physics is properly captured. Adaptive mesh refinement is employed to finely resolve only the regions with strong gradients, which provides further computational efficiency. The underlying computational fluid dynamics solver is a fourth-order finite-volume scheme with the standard 4-stage Runge-Kutta method. An advanced approach is devised and implemented to enable MGRIT to solve highly turbulent flows successfully. Furthermore, the method is applied to solve a Taylor-Green vortex problem and a doubleshear-layer turbulent mixing flow. Results are promising, validating that MGRIT with the filtering approach has the potential to efficiently solve general turbulent flows.

Computational Fluid Dynamics↗

Parallel Solver Framework for Mixed-Integer PDE-Constrained Optimization

ROL-PEBBL is a C++, MPI-based parallel code for mixed-integer PDE-constrained optimization (MIPDECO). In these problems we wish to optimize (control, design, etc.) physical systems, which must obey the laws of physics, when some of the decision variables must take integer values. ROL-PEBBL combines a code to efficiently search over integer choices (PEBBL = Parallel Enumeration Branch-and-Bound Library) and a code for efficient nonlinear optimization, including PDE-constrained optimization (ROL = Rapid Optimization Library). In this report, we summarize the design of ROL-PEBBL and initial applications/results. For an artificial source-inversion problem, finding sources of pollution on a grid from sparse samples, ROL-PEBBLs solution for the nest grid gave the best optimization guarantee for any general solver that gives both a solution and a quality guarantee.

97 MATHEMATICS AND COMPUTING↗

Linearized Aeroelastic Solver Applied to the Flutter Prediction of Real Configurations

A fast-running unsteady aerodynamics code, LINFLUX, was previously developed for predicting turbomachinery flutter. This linearized code, based on a frequency domain method, models the effects of steady blade loading through a nonlinear steady flow field. The LINFLUX code, which is 6 to 7 times faster than the corresponding nonlinear time domain code, is suitable for use in the initial design phase. Earlier, this code was verified through application to a research fan, and it was shown that the predictions of work per cycle and flutter compared well with those from a nonlinear time-marching aeroelastic code, TURBO-AE. Now, the LINFLUX code has been applied to real configurations: fans developed under the Energy Efficient Engine (E-cubed) Program and the Quiet Aircraft Technology (QAT) project. The LINFLUX code starts with a steady nonlinear aerodynamic flow field and solves the unsteady linearized Euler equations to calculate the unsteady aerodynamic forces on the turbomachinery blades. First, a steady aerodynamic solution is computed for given operating conditions using the nonlinear unsteady aerodynamic code TURBO-AE. A blade vibration analysis is done to determine the frequencies and mode shapes of the vibrating blades, and an interface code is used to convert the steady aerodynamic solution to a form required by LINFLUX. A preprocessor is used to interpolate the mode shapes from the structural dynamics mesh onto the computational fluid dynamics mesh. Then, LINFLUX is used to calculate the unsteady aerodynamic pressure distribution for a given vibration mode, frequency, and interblade phase angle. Finally, a post-processor uses the unsteady pressures to calculate the generalized aerodynamic forces, eigenvalues, an esponse amplitudes. The eigenvalues determine the flutter frequency and damping. Results of flutter calculations from the LINFLUX code are presented for (1) the E-cubed fan developed under the E-cubed program and (2) the Quiet High Speed Fan (QHSF) developed under the Quiet Aircraft Technology project. The results are compared with those obtained from the TURBO-AE code. A graph of the work done per vibration cycle for the first vibration mode of the E-cubed fan is shown. It can be seen that the LINFLUX results show a very good comparison with TURBO-AE results over the entire range of interblade phase angle. The work done per vibration cycle for the first vibration mode of the QHSF fan is shown. Once again, the LINFLUX results compare very well with the results from the TURBOAE code.

Reddy, Tondapu S.↗

Fluid preconditioning for Newton–Krylov-based, fully implicit, electrostatic particle-in-cell simulations

A recent proof-of-principle study proposes an energy- and charge-conserving, nonlinearly implicit electrostatic particle-in-cell (PIC) algorithm in one dimension [9]. The algorithm in the reference employs an unpreconditioned Jacobian-free Newton–Krylov method, which ensures nonlinear convergence at every timestep (resolving the dynamical timescale of interest). Kinetic enslavement, which is one key component of the algorithm, not only enables fully implicit PIC as a practical approach, but also allows preconditioning the kinetic solver with a fluid approximation. This study proposes such a preconditioner, in which the linearized moment equations are closed with moments computed from particles. Effective acceleration of the linear GMRES solve is demonstrated, on both uniform and non-uniform meshes. The algorithm performance is largely insensitive to the electron–ion mass ratio. Numerical experiments are performed on a 1D multi-scale ion acoustic wave test problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Achieving High Efficiency in Reduced Order Modeling for Large Scale Polycrystal Plasticity Simulations

Reduced order models for the nonlinear response of heterogeneous microstructures typically require a construction (or training) stage to build the reduced order basis. In this manuscript, an efficient model construction strategy for the eigenstrain homogenization method (EHM) is presented. The proposed strategy relies on a parallel, element-by-element, conjugate gradient solver. Near linear scaling has been achieved with respect to the number of degrees of freedom used to resolve the microstructure. Linear scaling with respect to the number of pre-analyses required to construct the reduced order model (ROM) follows from the EHM formulation. Furthermore, a parallel implementation for fast evaluation of the constructed ROM has been developed using shared memory parallelization. It has been shown that for large microstructures with ≈ 10,000 grains, the total computational cost of evaluating the nonlinear response of a polycrystal could be reduced by approximately an order of magnitude using 32 cores with respect to serial ROM simulation. The present methodology has been verified using an additively manufactured polycrystalline microstructure of a nickel-based superalloy, Inconel 625. The capability of the developed framework to construct a ROM for such large microstructures, as well as the ability of the ROM to predict average and local quantities of interest has been demonstrated.

microscale↗

Stochastic average model methods

We consider the solution of finite-sum minimization problems, such as those appearing in nonlinear least-squares or general empirical risk minimization problems. We are motivated by problems in which the summand functions are computationally expensive and evaluating all summands on every iteration of an optimization method may be undesirable. Here we present the idea of stochastic average model (SAM) methods, inspired by stochastic average gradient methods. SAM methods sample component functions on each iteration of a trust-region method according to a discrete probability distribution on component functions; the distribution is designed to minimize an upper bound on the variance of the resulting stochastic model. We present promising numerical results concerning an implemented variant extending the derivative-free model-based trust-region solver POUNDERS, which we name SAM-POUNDERS.

97 MATHEMATICS AND COMPUTING↗

Temperature Fields in Soft Tissue during LPUS Treatment: Numerical Prediction and Experiment Results

Recent research has shown that beneficial therapeutic effects in soft tissues can be induced by the low power ultrasound (LPUS). For example, increasing of cells immunity to stress (among others thermal stress) can be obtained through the enhanced heat shock proteins (Hsp) expression induced by the low intensity ultrasound. The possibility to control the Hsp expression enhancement in soft tissues in vivo stimulated by ultrasound can be the potential new therapeutic approach to the neurodegenerative diseases which utilizes the known feature of cells to increase their immunity to stresses through the Hsp expression enhancement. The controlling of the Hsp expression enhancement by adjusting of exposure level to ultrasound energy would allow to evaluate and optimize the ultrasound-mediated treatment efficiency. Ultrasonic regimes are controlled by adjusting the pulsed ultrasound waves intensity, frequency, duration, duty cycle and exposure time. Our objective was to develop the numerical model capable of predicting in space and time temperature fields induced by a circular focused transducer generating tone bursts in multilayer nonlinear attenuating media and to compare the numerically calculated results with the experimental data in vitro. The acoustic pressure field in multilayer biological media was calculated using our original numerical solver. For prediction of temperature fields the Pennes' bio-heat transfer equation was employed. Temperature field measurements in vitro were carried out in a fresh rat liver using the 15 mm diameter, 25 mm focal length and 2 MHz central frequency transducer generating tone bursts with the spatial peak temporal average acoustic intensity varied between 0.325 and 1.95 W/cm{sup 2}, duration varied from 20 to 500 cycles at the same 20% duty cycle and the exposure time varied up to 20 minutes. The measurement data were compared with numerical simulation results obtained under experimental boundary conditions. Good agreement between the theoretical and measurement results for all cases considered has verified the validity and accuracy of our numerical model. Quantitative analysis of the obtained results enabled to find how the ultrasound-induced temperature rises in the rat liver could be controlled by adjusting the source parameters and exposure time.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

FROSch Preconditioners for Land Ice Simulations of Greenland and Antarctica

Numerical simulations of Greenland and Antarctic ice sheets involve the solution of large-scale highly nonlinear systems of equations on complex shallow geometries. This work is concerned with the construction of Schwarz preconditioners for the solution of the associated tangent problems, which are challenging for solvers mainly because of the strong anisotropy of the meshes and wildly changing boundary conditions that can lead to poorly constrained problems on large portions of the domain. In this study, two-level generalized Dryja--Smith--Widlund (GDSW)--type Schwarz preconditioners are applied to different land ice problems, i.e., a velocity problem, a temperature problem, as well as the coupling of the former two problems. We employ the message passing interface (MPI)--parallel implementation of multilevel Schwarz preconditioners provided by the package FROSch (fast and robust Schwarz) from the Trilinos library. The strength of the proposed preconditioner is that it yields out-of-the-box scalable and robust preconditioners for the single physics problems. To the best of our knowledge, this is the first time two-level Schwarz preconditioners have been applied to the ice sheet problem and a scalable preconditioner has been used for the coupled problem. The preconditioner for the coupled problem differs from previous monolithic GDSW preconditioners in the sense that decoupled extension operators are used to compute the values in the interior of the subdomains. Additionally, several approaches for improving the performance, such as reuse strategies and shared memory OpenMP parallelization, are explored. In our numerical study we target both uniform meshes of varying resolution for the Antarctic ice sheet as well as nonuniform meshes for the Greenland ice sheet. We present several weak and strong scaling studies confirming the robustness of the approach and the parallel scalability of the FROSch implementation. Among the highlights of the numerical results are a weak scaling study for up to 32,K processor cores (8,K MPI ranks and 4 OpenMP threads) and 566,M degrees of freedom for the velocity problem as well as a strong scaling study for up to 4,K processor cores (and MPI ranks) and 68,M degrees of freedom for the coupled problem.

97 MATHEMATICS AND COMPUTING↗

FROSch Preconditioners for Land Ice Simulations of Greenland and Antarctica

Numerical simulations of Greenland and Antarctic ice sheets involve the solution of large-scale highly nonlinear systems of equations on complex shallow geometries. This work is concerned with the construction of Schwarz preconditioners for the solution of the associated tangent problems, which are challenging for solvers mainly because of the strong anisotropy of the meshes and wildly changing boundary conditions that can lead to poorly constrained problems on large portions of the domain. Here, two-level GDSW (Generalized Dryja–Smith–Widlund) type Schwarz preconditioners are applied to different land ice problems, i.e., a velocity problem, a temperature problem, as well as the coupling of the former two problems. We employ the MPI-parallel implementation of multi-level Schwarz preconditioners provided by the package FROSch (Fast and Robust Schwarz)from the Trilinos library. The strength of the proposed preconditioner is that it yields out-of-the-box scalable and robust preconditioners for the single physics problems. To our knowledge, this is the first time two-level Schwarz preconditioners are applied to the ice sheet problem and a scalable preconditioner has been used for the coupled problem. The pre-conditioner for the coupled problem differs from previous monolithic GDSW preconditioners in the sense that decoupled extension operators are used to compute the values in the interior of the sub-domains. Several approaches for improving the performance, such as reuse strategies and shared memory OpenMP parallelization, are explored as well. In our numerical study we target both uniform meshes of varying resolution for the Antarctic ice sheet as well as non uniform meshes for the Greenland ice sheet are considered. We present several weak and strong scaling studies confirming the robustness of the approach and the parallel scalability of the FROSch implementation. Among the highlights of the numerical results are a weak scaling study for up to 32 K processor cores (8 K MPI-ranks and 4 OpenMP threads) and 566 M degrees of freedom for the velocity problem as well as a strong scaling study for up to 4 K processor cores (and MPI-ranks) and 68 M degrees of freedom for the coupled problem.

58 GEOSCIENCES↗

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation. Volume 1: Study results

A variety of artificial intelligence techniques which could be used with regard to NASA space applications and robotics were evaluated. The techniques studied were decision tree manipulators, problem solvers, rule based systems, logic programming languages, representation language languages, and expert systems. The overall structure of a robotic simulation tool was defined and a framework for that tool developed. Nonlinear and linearized dynamics equations were formulated for n link manipulator configurations. A framework for the robotic simulation was established which uses validated manipulator component models connected according to a user defined configuration.

Lowrie, J. W.↗