Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Next”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

The Universal Space Transponder: A Next Generation Software Defined Radio

The Universal Space Transponder (UST) is a next generation transponder developed at the Jet Propulsion Laboratory to meet a large variety of telecom, navigation, and radio science needs for future deep-space and near-Earth missions. This paper details the UST software defined radio design and describes how the combination of a modular hardware architecture and in-flight reprogrammability enables a new level of flexibility and expandability for a space transponder. The UST uses common power and digital processing assemblies that can be integrated with a variety of RF modules and is capable of simultaneous, multiband operations with data rates up to 37.5 Mbps RX and 300 Mbps TX. This allows a single radio to support all the direct-to-Earth and relay communication requirements for even complex mission scenarios, reducing the total cost, mass, and power. The discussion includes a description of the current UST engineering models that have been built and tested, as well as details about the next generation capabilities supported by UST, including advanced link coding and modulation, radiometric techniques, and in-radio protocol handling. Details are also presented on RF modules and digital processing in development for radio science and astronomy purposes, including a bistatic radar receiver and broadband planetary emissions receiver. These will demonstrate the ability to integrate low-cost science instruments into the UST architecture, further expanding the versatility of the UST.

Jedrey, Thomas↗

High Performance Space Computing with System-on-Chip Instrument Avionics for Space-based Next Generation Imaging Spectrometers (NGIS).

The emergent technology of system-on-chip (SoC) devices promises lighter, smaller, cheaper, and more capable and reliable space electronic systems that could help to unveil some of the most treasured secrets in our universe. This technology is an improvement over the technology that is currently used in space applications, which lags behind stateof-the-art commercial-off-the-shelf (COTS) equipment by several generations. SoC technology integrates all computational power required by next-generation space exploration science instruments onto a single chip. This presentation will describe a Xilinx Zynq-based data acquisition, cloud-screening and compression computing system that has been developed at the Jet Propulsion Laboratory (JPL) for JPL’s Next Generation Imaging Spectrometers (NGIS). The Xilinx Zynq-based Alpha Data hardware assembly fits into a 120mm by 190m by 40mm assembly and uses 9 watts at peak performance. The computing element is a Xilinx Zynq Z7045Q which includes a Kintex-7 FPGA (equivalent to 3 RAD Virtex5 FPGAs in terms of logic cell resources) and dual-core ARM Cortex-A9 Processors (equivalent to 10 RAD750 Power PCs in term of processing capability).

Smith, Adam↗

High Performance Space Computing with System-on-Chip Instrument Avionics for Space-based Next Generation Imaging Spectrometers (NGIS).

The emergent technology of system-on-chip (SoC) devices promises lighter, smaller, cheaper, and more capable and reliable space electronic systems that could help to unveil some of the most treasured secrets in our universe. This technology is an improvement over the technology that is currently used in space applications, which lags behind state-of-the-art commercial-off-the-shelf (COTS) equipment by several generations. SoC technology integrates all computational power required by next-generation space exploration science instruments onto a single chip. This presentation will describe a Xilinx Zynq-based data acquisition, cloud-screening and compression computing system that has been developed at the Jet Propulsion Laboratory (JPL) for JPL’s Next Generation Imaging Spectrometers (NGIS). The Xilinx Zynq-based Alpha Data hardware assembly fits into a 120mm by 190m by 40mm assembly and uses 9 watts at peak performance. The computing element is a Xilinx Zynq Z7045Q which includes a Kintex-7 FPGA (equivalent to 3 RAD Virtex5 FPGAs in terms of logic cell resources) and dual-core ARM Cortex-A9 Processors (equivalent to 10 RAD750 Power PCs in term of processing capability).

Dolinar, Sam↗

High performance space computing with system-on-chip instrument avionics for space-based Next Generation Imaging Spectrometers (NGIS)

The emergent technology of system-on-chip (SoC) devices promises lighter, smaller, cheaper, and more capable and reliable space electronic systems that could help to unveil some of the most treasured secrets in our universe. This technology is an improvement over the technology that is currently used in space applications, which lags behind state-of-the-art commercial-off-the-shelf (COTS) equipment by several generations. SoC technology integrates all computational power required by next-generation space exploration science instruments onto a single chip. This presentation will describe a Xilinx Zynq-based data acquisition, cloud-screening and compression computing system that has been developed at the Jet Propulsion Laboratory (JPL) for JPL’s Next Generation Imaging Spectrometers (NGIS). The Xilinx Zynq-based Alpha Data hardware assembly fits into a 120mm by 190m by 40mm assembly and uses 9 watts at peak performance. The computing element is a Xilinx Zynq Z7045Q which includes a Kintex-7 FPGA (equivalent to 3 RAD Virtex5 FPGAs in terms of logic cell resources) and dual-core ARM Cortex-A9 Processors (equivalent to 10 RAD750 Power PCs in term of processing capability).

Dolinar, Sam↗

Idea Evolution ... What's Next?

No research project lasts forever. Even the most wildly successful programs will eventually come to an end. The challenge in that moment, when a project ends, is how to take what was learned in that project and apply it to the next research activity you undertake. Although not always possible, information and insights from a project that is underway or coming to a close can be leveraged to identify a new research direction and advance existing tangentially related activities. In this presentation, a common thread will be followed through a series of sequential research projects where lessons learned in each activity were built into the next enabling each new research project to advance further and faster. Initial research focused on lunar dust adhesion mitigation coalesced into two major contributors to adhesion interactions; which were, not surprisingly, surface chemistry and topography. This knowledge was applied to addressing insect residue adhesion mitigation on commercial aircraft leading edge surfaces. Composite epoxy coatings formulated with controlled surface chemistry and topography were evaluated and led to identification of additional relevant considerations: dynamics and surface morphology. Collectively, these considerations were applied to address impact ice adhesion mitigation where further properties were elucidated: surface mechanical properties and durability. Seeking commonality between these research endeavors led to greater understanding of each new research objective and ultimately, identification of robust, viable pathways toward meaningful results.

Adhesion Mitigation↗

Investigation of Rectifier Diode Failures in the NEXT-C Power Processing Unit

NASA's Evolutionary Xenon Thruster-Commercial (NEXT-C) project is tasked with developing flight electric propulsion systems, including both thrusters and power processing units (PPUs). In 2018, the beam supply in a NEXT-C engineering prototype PPU experienced an output rectifier diode failure during development thermal-vacuum testing. A failure investigation led by NASA GRC identified the root cause of the failure as a thermal runaway caused by increased reverse recovery losses in the diodes when the PPU was run at its maximum operating temperature. Significant reverse recovery performance variations were identified in diodes with the same part number but manufactured by different vendors. The failure investigation was able to collect evidence of the increased reverse recovery and replicate the diode failures in a controlled laboratory environment.

George L Thomas↗

Investigation of Rectifier Diode Failures in the NEXT-C Power Processing Unit

NASA's Evolutionary Xenon Thruster-Commercial (NEXT-C) project is tasked with developing flight electric propulsion systems, including both thrusters and power processing units (PPUs). In 2018, the beam supply in a NEXT-C engineering prototype PPU experienced an output rectifier diode failure during development thermal-vacuum testing. A failure investigation led by NASA GRC identified the root cause of the failure as a thermal runaway caused by increased reverse recovery losses in the diodes when the PPU was run at its maximum operating temperature. Significant reverse recovery performance variations were identified in diodes with the same part number but manufactured by different vendors. The failure investigation was able to collect evidence of the increased reverse recovery and replicate the diode failures in a controlled laboratory environment.

George L. Thomas↗

Evaluation of SWIR Crop Residue Bands for the Landsat Next Mission

This research reports the findings of a Landsat Next expert review panel that evaluated the use of narrow shortwave infrared (SWIR) reflectance bands to measure ligno-cellulose absorption features centered near 2100 and 2300 nm, with the objective of measuring and mapping non-photosynthetic vegetation (NPV), crop residue cover, and the adoption of conservation tillage practices within agricultural landscapes. Results could also apply to detection of NPV in pasture, grazing lands, and non-agricultural settings. Currently, there are no satellite data sources that provide narrowband or hyperspectral SWIR imagery at sufficient volume to map NPV at a regional scale. The Landsat Next mission, currently under design and expected to launch in the late 2020’s, provides the opportunity for achieving increased SWIR sampling and spectral resolution with the adoption of new sensor technology. This study employed hyperspectral data collected from 916 agricultural field locations with varying fractional NPV, fractional green vegetation, and surface moisture contents. These spectra were processed to generate narrow bands with centers at 2040, 2100, 2210, 2260, and 2230 nm, at various bandwidths, that were subsequently used to derive 13 NPV spectral indices from each spectrum. For crop residues with minimal green vegetation cover, two-band indices derived from 2210 and 2260 nm bands were top performers for measuring NPV (R^(2) = 0.81, RMSE = 0.13) using bandwidths of 30 to 50 nm, and the addition of a third band at 2100 nm increased resistance to atmospheric correction residuals and improved mission continuity with Landsat 8 Operational Land Imager Band 7. For prediction of NPV over a full range of green vegetation cover, the Cellulose Absorption Index, derived from 2040, 2100, and 2210 nm bands, was top performer (R^(2) = 0.77, RMSE = 0.17), but required a narrow (≤20 nm) bandwidth at 2040 nm to avoid interference from atmospheric carbon dioxide absorption. In comparison, broadband NPV indices utilizing Landsat 8 bands centered at 1610 and 2200 nm performed poorly in measuring fractional NPV (R^(2) = 0.44), with significantly increased interference from green vegetation

Wells Dean Hively↗

The Next Generation Space Telescope: Visiting a Time When Galaxies Were Young

In the spring and summer of 1996, three independent teams studied the feasibility of a large aperture space telescope to follow the Hubble Space Telescope. The scientific goals for the new telescope had been laid out in a report by the HST & Beyond Committee, a group appointed by the Association of Universities for Research in Astronomy to consider the needs of the astronomical community after the nominal end of the HST mission in 2005. The technical capabilities and constraints on the new observatory were daunting: the telescope optics should be at least 4 meters in diameter and passively cooled to achieve optimum sensitivity in the near-infrared portion of the spectrum. Moreover, the costs should be kept within a fraction of those for the HST: approximately $500M for construction and $900M for lifetime costs, not including support for scientific data analysis. In their presentations to NASA on 19-21 August, 1996, the teams led by Lockheed Martin, TRW, and the Goddard Space Flight Center concluded that a Next Generation Space Telescope (NGST) was not only feasible and affordable, but that it could be made more powerful using recent breakthroughs in space technologies. Coming on the heels of breathtaking HST observations of distant galaxies in the process of formation, such an NGST could bridge the gap in our understanding of the earliest origins of stars, galaxies, and the elements that are the foundations of Life. This report presents the findings of the three teams and the technological roadmap which will guide us to the successful development of the NGST over the next decade. We have made liberal use of the written material, tables, and diagrams prepared by the three study teams. We have also taken advantage of the knowledge and ideas of our colleagues in government, industry and academia. In Appendix A, we list the members of the three study groups, the NGST Science Working Group and the NGST Scientific Oversight Committee. We deeply appreciate their assistance, advice, and enthusiasm. The scientific and technological goals of NGST are part of the Origins initiative in the Office of Space Science, NASA Headquarters. We are pleased to acknowledge the support and leadership of Edward Weiler, a steadfast friend of HST, Harley Thronson, a proponent of all things infrared, and Mike Kaplan, a tireless advocate of new technology. John Campbell, Project Manager for HST, initiated the NGST study at GSFC and we deeply appreciate his formative efforts and continued support. We are also grateful for the foresight of Riccardo Giacconi, Director General of the European Southern Observatory (ESO), and the efforts of his staff. We note that European Space Agency (ESA) staff at the Space Telescope Science Institute and ESO played important roles in the NGST scientific and technical studies. We look forward to future collaboration with ESA, ESO, and other international partners.

H.S. Stockman↗

Challenges and Opportunities for Next-Generation Manufacturing in Space

With commercial space travel now a reality, the idea that people might spend time on other planets in the future seems to have greater potential. To make this possible, however, there needs to be flexible means for manufacturing in space to enable tooling or resources to be created when needed to handle unexpected situations. Next-generation manufacturing paradigms offer significant potential for the kind of flexibility that might be needed; however, they can result in increases in computation time compared to traditional control methods that could make many of the computing resources already available on earth attractive for use. Furthermore, resilience is a significant focus of next-generation manufacturing strategies, and one way to enable resilience for space manufacturing would be to have backup controllers available on earth. These types of considerations raise questions about remote control and monitoring, as well as privacy of the data involved in such practices, that must be considered. This work provides a perspective on several topics tied to remote control and monitoring for manufacturing in space.

Kip Nieman↗

Ocean Carbon From Space: Current Status and Priorities for the Next Decade

The ocean plays a central role in modulating the Earth’s carbon cycle. Monitoring how the ocean carbon cycle is changing is fundamental to managing climate change. Satellite remote sensing is currently our best tool for viewing the ocean surface globally and systematically, at high spatial and temporal resolutions, and the past few decades have seen an exponential growth in studies utilising satellite data for ocean carbon research. Satellite-based observations must be combined with in-situ observations and models, to obtain a comprehensive view of ocean carbon pools and fluxes. To help prioritise future research in this area, a workshop was organised that assembled leading experts working on the topic, from around the world, including remote-sensing scientists, field scientists and modellers, with the goal to articulate a collective view of the current status of ocean carbon research, identify gaps in knowledge, and formulate a scientific roadmap for the next decade, with an emphasis on evaluating where satellite remote sensing may contribute. A total of 449 scientists and stakeholders participated (with balanced gender representation), from North and South America, Europe, Asia, Africa, and Oceania. Sessions targeted both inorganic and organic pools of carbon in the ocean, in both dissolved and particulate form, as well as major fluxes of carbon between reservoirs (e.g., primary production) and at interfaces (e.g., air-sea and land–ocean). Extreme events, blue carbon and carbon budgeting were also key topics discussed. Emerging priorities identified include: expanding the networks and quality of in-situ observations; improved satellite retrievals; improved uncertainty quantification; improved understanding of vertical distributions; integration with models; improved techniques to bridge spatial and temporal scales of the different data sources; and improved fundamental understanding of the ocean carbon cycle, and of the interactions among pools of carbon and light. We also report on priorities for the specific pools and fluxes studied, and highlight issues and concerns that arose during discussions, such as the need to consider the environmental impact of satellites or space activities; the role satellites can play in monitoring ocean carbon dioxide removal approaches; economic valuation of the satellite based information; to consider how satellites can contribute to monitoring cycles of other important climatically-relevant compounds and elements; to promote diversity and inclusivity in ocean carbon research; to bring together communities working on different aspects of planetary carbon; maximising use of international bodies; to follow an open science approach; to explore new and innovative ways to remotely monitor ocean carbon; and to harness quantum computing. Overall, this paper provides a comprehensive scientific roadmap for the next decade on how satellite remote sensing could help monitor the ocean carbon cycle, and its links to the other domains, such as terrestrial and atmosphere.

oceanography↗

Where IMERG Goes Next: Version 08 and Beyond

With the Version 07 (V07) Integrated Multi-satellitE Retrievals for GPM (IMERG) algorithm finalized and production initiated, the focus turns to enhancements for Version 08. These include innovations not included in V07 due to time constraints, plus issues revealed by the initial V07 products. One high priority is to evaluate and revise the schemes in V07 that rectify temporal artifacts caused by the time interpolation that fills the gaps between the various passive microwave (PMW) sensor overpasses. A second priority is to improve the homogeneity between the TRMM and GPM eras by characterizing differences between the two eras, determining the causes of these differences, and applying corrections as feasible, perhaps by enforcing spatial scale consistency (an overarching issue). Certainly, we must account for GPROF and the Combined Radar-Radiometer Algorithm converting to Machine Learning schemes in V08. Other priority topics include additional automated quality control for artifacts in the IR brightness temperatures and PMW precipitation fields, revisions to the specification algorithm for the probability of liquid precipitation, and accommodating new PMW sensors, which include the next generation of small-sats. We also consider the post-V08 landscape; the final GPM reprocessing will be restricted to fixing known code or algorithmic errors. Nonetheless, there are several data sources on the horizon to consider, including more small-sat PMW radiometers, AVHRR-based precipitation estimates (most useful in high latitudes), and the ISCCP-Next Generation and GEO-Ring projects that could provide easy access to multiple geosynchronous satellite channels and enable significantly improved algorithms compared to GEO-IR alone.

George J. Huffman↗

Evaluation of Planetary Boundary Layer Structure from NASA Global Modeling and Assimilation Office’s Next Retrospective Analysis Product MERRA-21C

The Planetary Boundary Layer (PBL) is a complex interface between Earth’s surface and the atmosphere with high spatiotemporal variability in its characteristics, and accurate simulation and observation of the PBL has proven to be a challenge. In this study, we evaluate PBL structures from NASA Global Modeling and Assimilation Office (GMAO)’s next retrospective analysis product: the Goddard Earth Observing System Retrospective Analysis of the early 21st Century (GEOS-R21C), with 25-km horizontal resolution. The GEOS-R21C incorporates a wide range of observing systems and various improvements over previous GMAO reanalysis. We compare the PBL thermodynamic structure as well as PBL Height (PBLH) from GEOS-R21C with various PBL observations. For PBLH, definitions are different depending on each observing system. PBLHs derived from radiosonde observations and Global Navigation Satellite System Radio Occultation (GNSS RO) are based on bulk Richardson number and refractivity gradient, respectively. The results of the evaluation of PBL structure from GMAO’s next retrospective analysis product will be presented. In addition, comparison between near-real-time (NRT) commercial and NASA commercial GNSS RO PBLH will also be discussed.

Eun-Gyeong Yang↗

Expanded Signal to Noise Ratio Estimates for Validating Next-Generation Satellite Sensors in Oceanic, Coastal, and Inland Waters

The launch of the NASA Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) and the Surface Biology and Geology (SBG) satellite sensors will provide increased spectral resolution compared to existing platforms. These new sensors will require robust calibration and validation datasets, but existing field-based instrumentation is limited in its availability and potential for geographic coverage, particularly for coastal and inland waters, where optical complexity is substantially greater than in the open ocean. The minimum signal-to-noise ratio (SNR) is an important metric for assessing the reliability of derived biogeochemical products and their subsequent use as proxies, such as for biomass, in aquatic systems. The SNR can provide insight into whether legacy sensors can be used for algorithm development as well as calibration and validation activities for next-generation platforms. We extend our previous evaluation of SNR and associated uncertainties for representative coastal and inland targets to include the imaging sensors PRISM and AVIRIS-NG, the airborne-deployed C-AIR radiometers, and the shipboard HydroRad and HyperSAS radiometers, which were not included in the original analysis. Nearly all the assessed hyperspectral sensors fail to meet proposed criteria for SNR or uncertainty in remote sensing reflectance (R rs ) for some part of the spectrum, with the most common failures (>20% uncertainty) below 400 nm, but all the sensors were below the proposed 17.5% uncertainty for derived chlorophyll-a. Instrument suites for both in-water and airborne platforms that are capable of exceeding all the proposed thresholds for SNR and R rs uncertainty are commercially available. Thus, there is a straightforward path to obtaining calibration and validation data for current and next-generation sensors, but the availability of suitable high spectral resolution sensors is limited.

signal-to-noise ratio↗

Next Generation Exercise Device (NGED): Advancing Exercise Capabilities for Future Space Missions Through Biomechanical Modeling

BACKGROUND As space exploration extends to long-duration missions on the Moon and Mars, maintaining astronaut health and fitness becomes increasingly critical. The Next Generation Exercise Device (NGED), developed and tested by the HumanWorks Lab in NASA Johnson Space Center's (JSC) Software, Robotics, and Simulation Division, aims to address this challenge through innovative approaches. This study presents the development and evaluation of an NGED system, focusing on its adaptability to various mission scenarios, including prospective use in a Lunar Pressurized Rover (LPR). Central to this project is the application of biomechanical modeling to optimize exercise efficacy and safety in microgravity and partial gravity environments. The project is a collaborative effort with the Human Health and Performance group at Johnson Space Center, ensuring a comprehensive approach to astronaut well-being that integrates biomechanical principles with practical exercise solutions. The NGED represents the next generation of exercise capabilities for missions in space, on the Moon and Mars, with a specific focus on applications such as the LPR. METHODS AND RESULTS Data collection for NGED development was conducted with two motor-driven Beyond Power Voltra I [1] systems and a custom test structure to allow placement of the cable-based devices on the ground, at shoulder height, and overhead. The collection was performed in JSC’s Prototype Immersive Technology (PIT) Lab, utilizing an OptiTrack motion capture system and AMTI force platform, to enable detailed biomechanical analysis via OpenSim [2,3]. Motion capture data were collected for three subjects representing different body types and statures. The marker set used was an enhanced version of the full-body Plug-in Gait marker set [4], with additional markers strategically placed for the primary objective of informing exercise volume requirements. Subjects performed a series of 17 exercises, carefully selected to engage various muscle groups, including novel spaceflight exercises such as skiing (ergometer style), lateral pulldowns, wood chops, triceps extensions, and flies, with load variations ranging from 10 to 90 pounds to maintain kinematic form. This comprehensive approach allowed for a thorough evaluation of the NGED's performance across a wide range of motions and loads. The biomechanical modeling and analysis were conducted using a modified OpenSim Full Body Rajagopal Model [4,5] and also scaled to the maximum and minimum anthropometry provided in NASA-STD-3001 [6]. Volumetric convex hulls were generated based on model marker trajectories and aggregated into geometric assemblies. These can be placed in models of vehicle designs to assess fit to protect for exercise as well as to adapt NGED exercise to fit available space. Preliminary findings from the collection indicate that the NGED prototype demonstrates significant adaptability across varying user anthropometrics and exercise types. The device showed consistent performance in load-bearing exercises, with subjects able to perform exercises effectively while maintaining proper biomechanical form. CONCLUSION NGED represents a forward-looking advancement in exercise capabilities for future space missions. In the future, this system can be used to capture valuable metrics (e.g., isometric mid-thigh pull for force output measurements, assessments of postural muscle strength, overall isometric strength). Its versatility in accommodating various exercises and user physiques, coupled with the ability to provide targeted biomechanical loading, makes it a promising approach for maintaining astronaut health during long-duration missions to the Moon and Mars. Future work will focus on refining the NGED based on initial biomechanical findings, leveraging the detailed insights provided by motion capture and analysis techniques. Particular emphasis will be placed on optimizing its use within the confined spaces of a LPR and other space habitats. This work contributes significantly to NASA's goals of supporting human health and performance in deep space exploration, paving the way for sustainable long-term presence beyond Low Earth Orbit through advanced, biomechanically-informed exercise solutions.

C Wang↗

Physics 101: What Our Next President Needs to Know (LBNL Science at the Theater)

Rich Muller, author of Physics for Future Presidents, argues that the next president can't afford to be ignorant about the science behind terrorism, nuclear dangers, energy, space, and global warming. Muller, a MacArthur Fellow, Berkeley Lab physicist, and one of the most popular lecturers at UC Berkeley, discusses what it takes to survive in today's increasingly dangerous world -- information essential to the next commander-in-chief. He presented his talk Oct. 13, 2008.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

NNSA's next generation safeguards initiative to define an effective state system of accounting and control

The International Nuclear Safeguards and Engagement Program (INSEP), the international outreach component of the Next Generation Safeguards Initiative (NGSI), is a collaborative program that endeavors to strengthen international safeguards at all stages of nuclear development. One of the critical ways the program achieves this objective is through working with partners to increase the effectiveness of the State System of Accountancy for and Control of Nuclear Materials (SSAC) - the essential elements of national, regulatory and facility safeguards competencies that work as a system to provide the International Atomic Energy Agency (IAEA) and the world the full assurance of the state's adherence to its safeguards agreements. INSEP provides assistance in developing a state's SSAC in a number of areas, from developing national legislation governing the possession and use of nuclear material to working with nuclear facility operators to developing good practices in waste management. INSEP has collaborated with foreign partners in peaceful nuclear applications for over two decades, but recently, it has focused its efforts on strengthening SSACs due to the growth of nuclear power worldwide, particularly in countries with limited nuclear infrastructures. This new area of focus has prompted INSEP to develop a model of SSAC competencies that will serve not only as a structure for its engagement with partner states, but also as a means to facilitate coordination with other states that provide training and assistance, and as a mechanism for evaluating the effectiveness of its work in reaching its intended objectives. While this model uses as its starting point the requirements on a State that are presented in the Comprehensive Safeguards Agreement and the Additional Protocol, it is not, in itself, a requirements document or guidance for implementing requirements. It is rather an analysis of what capabilities will be needed in a State to be able to meet requirements and to build confidence in the State System. Viewed from this perspective, the model can be thought of as a quality assurance tool that assists states in ensuring that the outputs of their State System (the tangible 'goods' that are provided to the International Atomic Energy Agency under the State's agreements) are of high quality. As such, this tool is for the internal use of a State System that wishes to assess and improve its capacity. It is not intended for comparison or outside evaluation. In addition to providing a self-assessment tool, INSEP expects this model to be useful in several other ways: it will inform the approach that INSEP uses in bilateral consultations to identify areas where INSEP outreach and training may be of value, and it will provide a structure for its training curriculum. It will help INSEP to evaluate the effectiveness of its outreach - where there are gaps in the training provided, and whether the training that is provided meets its stated objectives. Finally, it will provide a framework for coordinating with the IAEA and other member states in the 'harmonization' efforts currently underway to align the outreach efforts of states that provide safeguards training. This paper describes the process of evaluation that INSEP is developing. It looks at the expected usefulness of the metrics for conducting self-assessments and joint assessments and enabling partners to identify training needs. The paper begins with a description of various performance requirements that define what must be done at the state and facility level to implement effective and efficient international safeguards. Next, technical performance measures are discussed, that define how well a state and its facilities are fulfilling these requirements. Then a functional analysis is conducted to align the technical requirements with competencies and determine who should carry out the various activities necessary to fulfill the performance requirements. Finally, the paper concludes with a discussion about SEP's approach in applying the metrics to its outreach activities intended to help countries to implement high-functioning SSACs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Third International Meeting on Next Generation Safeguards:Safeguards-by-Design at Enrichment Facilities

The Third International Meeting on Next Generation Safeguards (NGS3) was hosted by the U.S. Department of Energy (DOE)/National Nuclear Security Administration's (NNSA) Office of Nonproliferation and International Security (NIS) in Washington, D.C. on 14-15 December 2010; this meeting focused on the Safeguards-by-Design (SBD) concept. There were approximately 100 participants from 13 countries, comprised of safeguards policy and technical experts from government and industry. Representatives also were present from the Brazilian-Argentine Agency for Accounting and Control of Nuclear Materials (ABACC), the European Atomic Energy Agency (Euratom), and the International Atomic Energy Agency (IAEA). The primary objective of this meeting was to exchange views and provide recommendations on implementation of the SBD concept for four specific nuclear fuel cycle facility types: gas centrifuge enrichment plants (GCEPs), GEN III and GEN IV reactors, aqueous reprocessing plants, and mixed oxide fuel fabrication facilities. The general and facility-specific SBD documents generated from the four working groups, which were circulated for comment among working group participants, are intended to provide a substantive contribution to the IAEA's efforts to publish SBD guidance for these specific types of nuclear facilities in the near future. The IAEA has described the SBD concept as an approach in which 'international safeguards are fully integrated into the design process of a new nuclear facility from the initial planning through design, construction, operation, and decommissioning.' As part of the Next Generation Safeguards Initiative (NGSI), the DOE is working to establish SBD as a global norm through DOE laboratory studies, international workshops, engagement with industry and the IAEA, and setting an example through its use in new nuclear facilities in the United States. This paper describes the discussion topics and final recommendations of the Enrichment Facilities Working Group. The working group participants were tasked with providing recommendations for facility operators and designers, while promoting the IAEA's objectives of: (1) avoiding costly and time-consuming redesign work or retrofits of new nuclear facilities and (2) providing for more effective and efficient implementation of international safeguards.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗