Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Navigation Errors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Onboard rendezvous navigation for the Space Shuttle

The onboard rendezvous navigation software for Shuttle flight 41-C are described. Particular attention is given to the inputs, models, and outputs of the software. The performance of the rendezvous navigation system is compared to predicted performance profiles in connection with the relative vehicle geometry, as well as the location of the navigation sensor tracking arcs. The methods used to process navigational sensor measurements in order to update the state vector are also summarized. A table listing the sources of maneuver targeting errors is provided.

Wylie, A. D.↗
NASA NTRS1990

High-accuracy Mars approach navigation with radio metric and optical data

The aerocapture of a space vehicle on hyperbolic approach to Mars results in tight navigation requirements at atmospheric entry. The purpose of this paper is to examine several different methods for approach navigation and to determine what accuracies are possible. The methods are broken into four groups as follows (1) navigation with only Deep Space Network (DSN) tracking of the approach vehicle, (2) navigation with the DSN plus ranging between the approach vehicle and spacecraft in orbit about Mars, (3) navigation with the DSN plus optical data involving the Martian moons, and (4) navigation with DSN range data and differenced range data involving the approach spacecraft and orbiters at Mars. If the current modeling errors that affect earth-based radio metric data, such as errors in tracking station locations, the Martian ephemeris, and differences in the quasar and planetary coordinate frames, are improved, then perhaps earth-based tracking could meet the entry error requirements imposed by aerocapture. If not, then the other three options of intervehicular range, optical data, or differenced range provide highly accurate entry knowledge at least twelve hours before entry.

Konopliv, Alex↗
NASA NTRS2008

Pinpoint Landing Technology Assessment

This slide presentation reviews the technology developments required to achieve pinpoint landing for a Mars landing of a future unmanned vehicle. It addresses some of the challenges to achieving accurate landing (i.e., to 2-3 kilometers) of a designated landing site. The major challenge though is to reduce the possible propellant requirement to achieve this pinpoint landing capability which requires minimizing delivery error at powered descent ignition.

Mars pinpoint landing↗
NASA NTRS2012

Fault Mitigation Schemes for Future Spaceflight Multicore Processors

Future planetary exploration missions demand significant advances in on-board computing capabilities over current avionics architectures based on a single-core processing element. The state-of-the-art multi-core processor provides much promise in meeting such challenges while introducing new fault tolerance problems when applied to space missions. Software-based schemes are being presented in this paper that can achieve system-level fault mitigation beyond that provided by radiation-hard-by-design (RHBD). For mission and time critical applications such as the Terrain Relative Navigation (TRN) for planetary or small body navigation, and landing, a range of fault tolerance methods can be adapted by the application. The software methods being investigated include Error Correction Code (ECC) for data packet routing between cores, virtual network routing, Triple Modular Redundancy (TMR), and Algorithm-Based Fault Tolerance (ABFT). A robust fault tolerance framework that provides fail-operational behavior under hard real-time constraints and graceful degradation will be demonstrated using TRN executing on a commercial Tilera(R) processor with simulated fault injections.

software based↗
NASA NTRS1988

Angular navigation capabilities of short baseline phase delay interferometry

Short baseline phase delay interferometry can provide angular navigation capabilities which are competitive with current accuracies for group delay Very Long Baseline Interferometry (VLBI) on intercontinental baselines. In addition, a number of operational considerations make short baseline interferometry attractive, including enhanced mutual visibility, ability to observe at higher elevation angles, and the possibility of processing data in realtime. To make use of the higher precision phase delay datatype, however, the cycle ambiguity associated with the observed interferometric phase must be resolved. Results are presented for two experiments, on baselines of 5.9 and 253 km, for which RF phase connection appears to have been reliably achieved for several groups of angularly close radio sources. The dependence of the resulting phase delay residuals on elevation suggests that temporal fluctuations in the line-of-sight troposphere delay are a dominant error source. The observed RMS phase delay residuals of 10 psec or less suggest that baselines of order 100 km could provide high-efficiency angular navigation with accuracies well below 50 nrad. Plans for further work at the Goldstone Deep Space Communication Complex are reviewed.

Edwards, C. D.↗
NASA NTRS1985

Superconducting techniques for gravity survey and inertial navigation

A three-axis gravity gradiometer is developed, in which the magnetic fields produced by persistent currents are modulated by motions of superconducting proof masses. The common-acceleration-induced errors are compensated for by a six-axis superconducting accelerometer with a single magnetically levitated proof mass, linear acceleration resolution of 4 x 10 to the -12th m/(s exp 2 Hz exp 1/2), and angular acceleration resolution of 3 x 10 to the -11th rad/(s exp 2 Hz exp 1/2). The testing of a prototype gradiometer revealed that the environment-induced noise limits the noise floor to 7 x 10 to the -10th/(s exp 2 Hz exp 1/2).

Chan, H. A.↗
NASA NTRS1993

Helicopter approach capability using the differential global positioning system

The results of flight tests to determine the feasibility of using the Global Positioning System (GPS) in the differential mode (DGPS) to provide high accuracy, precision navigation, and guidance for helicopter approaches to landing are presented. The airborne DGPS receiver and associated equipment is installed in a NASA UH-60 Black Hawk helicopter. The ground-based DGPS reference receiver is located at a surveyed test site and is equipped with a real-time VHF data link to transmit correction information to the airborne DGPS receiver. The corrected airborne DGPS information, together with the preset approach geometry, is used to calculate guidance commands which are sent to the aircraft's approach guidance instruments. The use of DGPS derived guidance for helicopter approaches to landing is evaluated by comparing the DGPS data with the laser tracker truth data. Both standard (3 deg) and steep (6 deg and 9 deg) glideslope straight-in approaches were flown. DGPS positioning accuracy based on a time history analysis of the entire approach was 0.2 m (mean) +/- 1.8 m (2 sigma) laterally and -2.0 m (mean) +/- 3.5 m (2 sigma) vertically for 3 deg glideslope approaches, -0.1 m (mean) +/- 1.5 m (2 sigma) laterally and -1.1 m (mean) +/- 3.5 m (2 sigma) vertically for 6 deg glideslope approaches and 0.2 m (mean) +/- 1.3 m (2 sigma) laterally and -1.0 m (mean) +/- 2.8 m (2 sigma) vertically for 9 deg glideslope approaches. DGPS positioning accuracy at the 200 ft decision height (DH) on a standard 3 deg slideslope approach was 0.3 m (mean) +/- 1.5 m (2 sigma) laterally and -2.3 m (mean) +/- 1.6 m (2 sigma) vertically. These errors indicate that the helicopter position based on DGPS guidance satisfies the International Civil Aviation Organization (ICAO) Category 1 (CAT 1) lateral and vertical navigational accuracy requirements.

Kaufmann, David N.↗
NASA NTRS1978

Orbit trim maneuver design and implementation for the 1975 Mars Viking Mission

The Viking Mission included the insertion of two unmanned spacecraft into orbit about Mars and the deployment of a soft-lander from each. A description is presented of the adaptive design and implementation of the spacecraft propulsive maneuvers as these flights progressed, taking into account also the inflight results for the orbital phase of the primary Viking mission. The design process included the selection of target parameters and the minimization of both propellant usage and the effects of execution errors, while complying with mission and operational constraints. All maneuvers performed to trim the spacecraft orbits are considered. Attention is given to navigation requirements, geometry definitions and terminology, maneuver mechanization and constraints, and maneuver capability.

Hintz, G. R.↗
NASA NTRS1982

A rubidium clock for GPS

The design objectives and approach; the more important design features; the signal parameters and error budget; and early test results in the development of a second-source rubidium frequency standard for use in the GPS navigation satellites are discussed. Tests of a breadboard version of the RFS show that the measured time-domain stability is within the goal specification. The results are uncorrected for the conribution of the reference and are probably limited by the reference stability in the medium term region. The Rb reference is bbetter in the medium term region, but the Cs reference is etter at 10,000 seconds and longer, probably because of the barometric sensitivity of the rubidium reference unit.

Riley, W. J.↗
NASA NTRS1982

Estimating planetary terrain slopes from range measurements using a two dimensional spline smoothing technique

A new scanning scheme is presented for implementation for terrain slope estimation on a Martian exploratory rover. The rover will be equipped with a laser rangefinder as a principal sensing device for distance in its navigational equipment. A scan of the horizontal terrain from 5-50 m is indicated, and calculations are devised for quantifying the range errors. A constant incremental pointing angle is ruled out and a set of three pointing angles for different sub-areas of scan are defined. A two-dimensional smoothing algorithm is described for estimating slopes. The resultant scanning scheme involves the use of the characteristic curves derived from the relationships between the incremental elevation angle and the horizontal data spacing and the slope error index. A simulation was run and wavy terrain was produced from noise corrupted range measurements.

Kim, C. S.↗
NASA NTRS2009

Navigating the Return Trip from the Moon Using Earth-Based Ground Tracking and GPS

NASA s Constellation Program is planning a human return to the Moon late in the next decade. From a navigation perspective, one of the most critical phases of a lunar mission is the series of burns performed to leave lunar orbit, insert onto a trans-Earth trajectory, and target a precise re-entry corridor in the Earth s atmosphere. A study was conducted to examine sensitivity of the navigation performance during this phase of the mission to the type and availability of tracking data from Earth-based ground stations, and the sensitivity to key error sources. This study also investigated whether GPS measurements could be used to augment Earth-based tracking data, and how far from the Earth GPS measurements would be useful. The ability to track and utilize weak GPS signals transmitted across the limb of the Earth is highly dependent on the configuration and sensitivity of the GPS receiver being used. For this study three GPS configurations were considered: a "standard" GPS receiver with zero dB antenna gain, a "weak signal" GPS receiver with zero dB antenna gain, and a "weak signal" GPS receiver with an Earth-pointing direction antenna (providing 10 dB additional gain). The analysis indicates that with proper selection and configuration of the GPS receiver on the Orion spacecraft, GPS can potentially improve navigation performance during the critical final phases of flight prior to Earth atmospheric entry interface, and may reduce reliance on two-way range tracking from Earth-based ground stations.

Berry, Kevin↗
NASA NTRS2006

Use of Very Long Baseline Array Interferometric Data for Spacecraft Navigation

The main VLBI technique that is used at JPL is known as the Delta Differential One-way Ranging ((Delta)DOR). Two DSN antennas simultaneously track a source, and alternate between sources. The signals recorded at the antennas from each source are correlated to obtain the delay in arrival to the two antennas, and the delays are differenced to remove common-source errors. An alternative technique is to use carrier phase differences between antennas. This is routinely done by the Very Large Baseline Array (VLBA) as part of source imaging. The VLBA capabilities are used for scientific research, but also have the potential to be used for navigation. Two main experiments were performed with the VLBA and JPL spacecraft. This paper describes and analyzes these experiments and discusses the possible uses of VLBA tracking for spacecraft navigation.

Very Large Baseline Array (VLBA)↗
NASA NTRS2014

Guidance, Navigation, and Control Performance for the GOES-R Spacecraft

The Geostationary Operational Environmental Satellite-R Series (GOES-R) is the first of the next generation geostationary weather satellites. The series represents a dramatic increase in Earth observation capabilities, with 4 times the resolution, 5 times the observation rate, and 3 times the number of spectral bands. GOES-R also provides unprecedented availability, with less than 120 minutes per year of lost observation time. This paper presents the Guidance Navigation & Control (GN&C) requirements necessary to realize the ambitious pointing, knowledge, and Image Navigation and Registration (INR) objectives of GOES-R. Because the suite of instruments is sensitive to disturbances over a broad spectral range, a high fidelity simulation of the vehicle has been created with modal content over 500 Hz to assess the pointing stability requirements. Simulation results are presented showing acceleration, shock response spectra (SRS), and line of sight (LOS) responses for various disturbances from 0 Hz to 512 Hz. Simulation results demonstrate excellent performance relative to the pointing and pointing stability requirements, with LOS jitter for the isolated instrument platform of approximately 1 micro-rad. Attitude and attitude rate knowledge are provided directly to the instrument with an accuracy defined by the Integrated Rate Error (IRE) requirements. The data are used internally for motion compensation. The final piece of the INR performance is orbit knowledge, which GOES-R achieves with GPS navigation. Performance results are shown demonstrating compliance with the 50 to 75 m orbit position accuracy requirements. As presented in this paper, the GN&C performance supports the challenging mission objectives of GOES-R.

Control↗
NASA NTRS1995

(abstract) Application of Non-coherent Data Types for Deep Space Navigation

Several options are being examined to reduce the costs of spacecraft and deep space missions. One such option is to fly spacecraft in a non-coherent mode, that is, the spacecraft does not carry a transponder and cannot coherently return a Doppler signal. Historically, such one-way data has not been used as the sole data type due to the instability of the onboard oscillator, the use of S-band frequencies, and the corresponding larger error sources which could not be modeled. However, with the advent of high-speed work stations and more sophisticated modeling ability, the possibility of using one-way data is being re-examined. This paper addresses the navigation performance of various one-way data types for use in interplanetary missions.

deep space navigation non-coherent data spacecraft↗
NASA NTRS2003

Aerocapture navigation at Neptune

A proposed Neptune orbiter Aerocapture mission will use solar electric propulsion to send an orbiter to Neptune. Navigation feasibility of direct-entry aerocapture for orbit insertion at Neptune is shown. The navigation strategy baselines optical imaging and (delta)VLBI measurement in order to satisfy the flight system's atmosphere entry flight path angle, which is targeted to enter Neptune with an entry flight path angle of -11.6 . Error bars on the entry flight path angle of plus/minus0.55 (3(sigma)) are proposed. This requirement can be satisfied with a data cutoff 3.2 days prior to arrival. There is some margin in the arrival template to tighten (i.e. reduce) the entry corridor either by scheduling a data cutoff closer to Neptune or alternatively, reducing uncertainties by increasing the fidelity of the optical navigation camera.

interplanetary navigation↗
NASA NTRS1984

Analysis of lidar, radar and satellite measurements on severe thunderstorms and their environments

Intercomparison of wind data from the airborne Doppler lidar, ground-based Doppler radars, the 444 m NSSL-KTVY tower, and rawinsonde were completed. The vertical profile of wind in the PBL measured by the radars compared favorably with the profiles measured by the tower and rawinsonde while the one obtained from lidar data differed from the other three by as much as 3m/sec in wind speed and 38 degrees in direction. The time dependence of differences in wind estimates from radar and lidar suggested that these discrepencies could be attributed to a Schuler resonance in the aircraft's inertial navigation system which caused an erroneous component of the aircraft's velocity vector to be subtracted from the lidar radial velocities, thus creating errors in the synthesized wind speed and direction. The vertical profile of turbulent fluctuations of the horizontal wind detected by the different systems compared well. Also, spectra from the different sensing systems compared well in both magnitude and shape, suggesting that the lidar and radar detected similar turbulent structure.

Bluestein, H.↗
NASA NTRS1992

Demonstration of orbit determination using same-beam interferometry for Magellan and Pioneer 12

Orbit determination results are presented for Magellan and Pioneer 12 utilizing same-beam interferometer (SBI) data, which is a new data type for planetary orbiter navigation. The orbit determination data employing this data type, based on orbit-to-orbit consistency, has been explained in terms of nominal error models. Results show the orbit determination accuracy for Pioneer 12 using Doppler plus SBI data to be better than the accuracy utilizing only Doppler data by 30 percent.

Folkner, W. M.↗
NASA NTRS1992

Pressurized Lunar Rover

The pressurized lunar rover (PLR) consists of a 7 m long, 3 m diameter cylindrical main vehicle and a trailer which houses the power and heat rejection systems. The main vehicle carries the astronauts, life support systems, navigation and communication systems, directional lighting, cameras, and equipment for exploratory experiments. The PLR shell is constructed of a layered carbon-fiber/foam composite. The rover has six 1.5 m diameter wheels on the main body and two 1.5 m diameter wheels on the trailer. The wheels are constructed of composites and flex to increase traction and shock absorption. The wheels are each attached to a double A-arm aluminum suspension, which allows each wheel 1 m of vertical motion. In conjunction with a 0.75 m ground clearance, the suspension aids the rover in negotiating the uneven lunar terrain. The 15 N-m torque brushless electric motors are mounted with harmonic drive units inside each of the wheels. The rover is steered by electrically varying the speeds of the wheels on either side of the rover. The PLR trailer contains a radiosotope thermoelectric generator providing 6.7 kW. A secondary back-up energy storage system for short-term high-power needs is provided by a bank of batteries. The trailer can be detached to facilitate docking of the main body with the lunar base via an airlock located in the rear of the PLR. The airlock is also used for EVA operation during missions. Life support is a partly regenerative system with air and hygiene water being recycled. A layer of water inside the composite shell surrounds the command center. The water absorbs any damaging radiation, allowing the command center to be used as a safe haven during solar flares. Guidance, navigation, and control are supplied by a strapdown inertial measurement unit that works with the on-board computer. Star mappers provide periodic error correction. The PLR is capable of voice, video, and data transmission. It is equipped with two 5 W X-band transponder, allowing simultaneous transmission and reception. An S-band transponder is used to communicate with the crew during EVA. The PLR has a total mass of 6197 kg. It has a nominal speed of 10 km/hr and a top speed of 18 km/hr. The rover is capable of towing 3 metric tons (in addition to the RTG trailer).

Creel, Kenneth↗