Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NSTX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Control of neutral fueling and helium exhaust to NSTX-U plasmas by means of three-dimensional magnetic control fields

Resonant magnetic perturbations are used to stabilize plasma edge instabilities, so-called edge localized modes (ELMs), in high-performance (H-mode) plasmas explored for fusion energy. These ELMs cause repetitive outburst of confined energy and particles and cause cyclic loading of plasma facing components (PFCs). This endangers the integrity of the PFCs and hence limits the lifetime and hence commercial viability of fusion. It was shown that these ELMs can be stabilized by application of small amplitude resonant magnetic perturbation (RMP) fields. This removes the ELMs as edge instabilities but also induces three-dimensional (3D) effects to the plasma boundary, which was formerly toroidally axisymmetric. The impact of this 3D perturbation on the plasma boundary solution needs to be understood to extrapolate the effects to ITER and towards a fusion reactor, if ELM control by RMP fields would be utilized.

3D Boundary Plasmas↗

Advancing understanding and predictive capability for fast-ion driven instabilities and associated anomalous transport in NSTX-U

This project advanced predictive capability for the spherical tokamak (ST) by (a) experimental validation of physics models in GTC for simulating fast-ion driven instabilities and their fast-ion and energy transport in the ST, and (b) verification of GTC with linear theory and validation using experimental measurements in the high frequency regime in the ST.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scaling of radial propagating structures in the scrape-off layer of the National Spherical Torus Experiment (NSTX)

The radial propagation of spatiotemporal turbulent structures in the scrape-off layer of the National Spherical Torus Experiment [M. Ono, M.G. Bell, R.E. Bell, et al. Plasma Phys. Control. Fusion 45, A335 (2003)] is investigated. Two-dimensional spatiotemporal imaging of the Dα emission intensity is used to observe the fluctuation structures in the poloidal plane perpendicular to the ambient magnetic field. Turbulent structures are extracted and the individual properties such as velocity, spatial scale and amplitude are determined. The typical poloidal scale of the structures is k θ = 0.5 cm -1 . The poloidal and radial structure velocities are < 5 km/s and 1 km/s, respectively. The radial velocities do not vary significantly with their spatial size within this set of data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling Fast Ion Transport in TAE Avalanches in NSTX

Experiments on the National Spherical Torus Experiment [M. Ono, et al., Nucl. Fusion 40 (2000) 557 ] have found strong bursts of Toroidal Alfven Eigenmode (TAE) activity correlated with abrupt drops in the neutron rate. A fairly complete data set offers the opportunity to benchmark the NOVA [C. Z. Cheng, Phys. Reports 211, 1-51 (1992)] and ORBIT [R. B. White and M. S. Chance, Phys. Fluids 27, 2455 (1984)] codes in the low aspect ratio tokamak (ST) geometry. The internal structure of TAE were modeled with NOVA and good agreement is found with measurements made with an array of five fixed-frequency reflectometers. The fast-ion transport resulting from these bursts of multiple TAE were then modeled with the ORBIT code. The simulations are reasonably consistent with the observed drop in neutron rate. While these results represent our best attempts to find agreement, we believe that further refinements in both the simulation of the TAE structure and in the modeling of the fast ion transport are needed. Benchmarking stability codes against present experiments is an important step in developing the predictive capability needed to plan future experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Secular Density Rises in NBI-heated H-mode Plasmas in NSTX

Plasma-wall interaction analysis is developed at the National Spherical Torus Experiment. At present, poloidally separated recycling and neutral pressure measurements are used to characterize recycling flux trends. The causes of monotonic density increases observed in initial phases of H-mode discharges at t <= 0.2-0.6 s appear to be the monotonically increasing source in the divertor, and particle containment time tau(p)* long in comparison with discharge duration. The ratio of the wall flux to divertor flux is low throughout the density increase phase except in the initial segment, when dN(e)/dt is highest and magnitudes of the wall and divertor fluxes are similar. (C) 2009 Elsevier B.V. All rights reserved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Secondary ELM Filaments in NSTX

Filamentary structures are observed in the scrape-off layer of the National Spherical Torus Experime05nt during ELMs. While the primary filaments correspond to a direct result of the ELM event, the 'secondary' filaments which occur generally later but still within 1 ms of the ELM onset are observed to have the same characteristics as inter-ELM filaments (or blobs): poloidal auto-correlation lengths of similar to 4 cm, broadband frequency and poloidal wave number spectra and radial velocities of 1-2 km/s. At the same time, no MHD modes are observed during the phase in which secondary filaments are present. (C) 2009 Elsevier B.V. All rights reserved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reconstruction in 3D of the fast wave fields in ITER, DIII-D, C-Mod and NSTX, including the coupling of full-wave and particle codes to resolve finite orbit effects

The rf-SciDAC collaboration is developing computer simulations to predict the damping of radio frequency (rf) waves in fusion plasmas. Here we extend self-consistent quasi-linear calculations of ion cyclotron resonant heating to include the finite drift of ions from magnetic flux surfaces and rf induced spatial transport. The all-orders spectral wave solver AORSA is iteratively coupled with a particle based update of the plasma distribution function using a quasi-linear diffusion tersor representative of the (k) over right arrow spectrum. Initial results are presented for a high power minority heating scenario on the Alcator C-Mod tokamak and a high harmonic beam heating scenario on DIII-D. Finite orbit effects are shown to give a less peaked perpendicular energy profile and rf induced transport.

43 PARTICLE ACCELERATORS↗

Measurements and 2-D Modeling of Recycling and Edge Transport in Discharges with Lithium-coated PFCs in NSTX

The application of lithium coatings on plasma facing components has been shown to profoundly affect plasma performance in the National Spherical Torus Experiment, improving energy confinement and eliminating edge-localized modes. The edge particle balance during these ELM-free discharges has been studied through 2-D plasma-neutrals modeling, constrained by measurements of the upstream plasma density and temperature profiles and the divertor heat flux and D-alpha emission. The calculations indicate that the reduction in divertor D-alpha emission with lithium coatings applied is consistent with a drop in recycling coefficient from R similar to 0.98 to R similar to 0.9. The change in recycling is not sufficient to account for the change in edge density profiles: interpretive modeling indicates similar transport coefficients within the edge transport barrier (D/chi(e) similar to 0.2/1.0 m(2)/s), but a widening of the barrier with lithium. (C) 2010 Elsevier B.V. All rights reserved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Disruptions, Disruptivity, and Safer Operating Windows in the High-β Spherical Torus NSTX

A fusion pilot plant study was initiated to clarify the development needs in moving from ITER to a first of a kind fusion power plant. The mission of the pilot plant was set to encompass component test and fusion nuclear science missions yet produce net electricity with high availability in a device designed to be prototypical of the commercial device. The objective of the study was to evaluate three different magnetic configuration options, the advanced tokamak (AT), spherical tokamak (ST) and compact stellarator (CS) in an effort to establish component characteristics, maintenance features and the general arrangement of each candidate device. With the move to look beyond ITER the fusion community is now beginning to embark on DEMO reactor studies with an emphasis on defining configuration arrangements that can meet a high availability goal. This paper reviews the AT pilot plant design, detailing the selected maintenance approach, the device arrangement and sizing of the in-vessel components. Details of interfacing auxiliary systems and services that impact the ability to achieve high availability operations will also be discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗