Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multiple processors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

The virtual library: Coming of age

With the high speed networking capabilities, multiple media options, and massive amounts of information that exist in electronic format today, the concept of a 'virtual' library or 'library without walls' is becoming viable. In virtual library environment, the information processed goes beyond the traditional definition of documents to include the results of scientific and technical research and development (reports, software, data) recorded in any format or media: electronic, audio, video, or scanned images. Network access to information must include tools to help locate information sources and navigate the networks to connect to the sources, as well as methods to extract the relevant information. Graphical User Interfaces (GUI's) that are intuitive and navigational tools such as Intelligent Gateway Processors (IGP) will provide users with seamless and transparent use of high speed networks to access, organize, and manage information. Traditional libraries will become points of electronic access to information on multiple medias. The emphasis will be towards unique collections of information at each library rather than entire collections at every library. It is no longer a question of whether there is enough information available; it is more a question of how to manage the vast volumes of information. The future equation will involve being able to organize knowledge, manage information, and provide access at the point of origin.

Hunter, Judy F.↗

Correlator computer interface and module implementation: Mark 3 processor

Two hardware aspects of the Mark 3 correlator are briefly described. The first area concerns the choice of interface to the controlling minicomputer and the second area concerns the implementation of the correlator module. Multiple computer automated measurement and control (CAMAC) modules and a single large CAMAC module were considered as possible packaging forms for the correlator. The large CAMAC module approach was chosen because of the difficulty in partitioning the correlator with minimum interconnections, the fabrication economy of a single large planar assembly, and the desire to minimize the number of modules.

Nesman, E. F.↗

Real-number codes for fault-tolerant matrix operations on processor arrays

A generalization of existing real number codes is proposed. It is proven that linearity is a necessary and sufficient condition for codes used for fault-tolerant matrix operations such as matrix addition, multiplication, transposition, and LU decomposition. It is also proven that for every linear code defined over a finite field, there exists a corresponding linear real-number code with similar error detecting capabilities. Encoding schemes are given for some of the example codes which fall under the general set of real-number codes. With the help of experiments, a rule is derived for the selection of a particular code for a given application. The performance overhead of fault tolerance schemes using the generalized encoding schemes is shown to be very low, and this is substantiated through simulation experiments.

Nair, V. S. S.↗

Communication-Avoiding and Memory-Constrained Sparse Matrix-Matrix Multiplication at Extreme Scale

Sparse matrix-matrix multiplication (SpGEMM) is a widely used kernel in various graph, scientific computing and machine learning algorithms. In this paper, we consider SpGEMMs performed on hundreds of thousands of processors generating trillions of nonzeros in the output matrix. Distributed SpGEMM at this extreme scale faces two key challenges: (1) high communication cost and (2) inadequate memory to generate the output. Furthermore, we address these challenges with an integrated communication-avoiding and memory-constrained SpGEMM algorithm that scales to 262,144 cores (more than 1 million hardware threads) and can multiply sparse matrices of any size as long as inputs and a fraction of output fit in the aggregated memory. As we go from 16,384 cores to 262,144 cores on a Cray XC40 supercomputer, the new SpGEMM algorithm runs 10x faster when multiplying large-scale protein-similarity matrices.

97 MATHEMATICS AND COMPUTING↗

Tensor Network Quantum Virtual Machine for Simulating Quantum Circuits at Exascale

The numerical simulation of quantum circuits is an indispensable tool for development, verification, and validation of hybrid quantum-classical algorithms intended for near-term quantum co-processors. The emergence of exascale high-performance computing (HPC) platforms presents new opportunities for pushing the boundaries of quantum circuit simulation. Here, we present a modernized version of the Tensor Network Quantum Virtual Machine (TNQVM) that serves as the quantum circuit simulation backend in the eXtreme-scale ACCelerator (XACC) framework. The new version is based on the scalable tensor network processing library ExaTN (Exascale Tensor Networks). It provides multiple configurable quantum circuit simulators that perform either an exact quantum circuit simulation via the full tensor network contraction or an approximate simulation via a suitably chosen tensor factorization scheme. Upon necessity, stochastic noise modeling from real quantum processors is incorporated into the simulations by modeling quantum channels with Kraus tensors. By combining the portable XACC quantum programming frontend and the scalable ExaTN numerical processing backend, we introduce an end-to-end virtual quantum development environment that can scale from laptops to future exascale platforms. We report initial benchmarks of our framework, which include a demonstration of the distributed execution, incorporation of quantum decoherence models, and simulation of the random quantum circuits used for the certification of quantum supremacy on Google’s Sycamore superconducting architecture.

Nguyen, Thien↗

Development of mathematical model and simulation tool for the high capacity production of carbon fiber

Weight reduction in the transportation is the most effective way for reducing fuel consumption. Carbon fiber composites have been increasingly used by automotive manufacturers in vehicle nonstructural and structural parts. Larger penetration of carbon fiber-based materials requires very large quantities of fiber at a low price, and of consistently high quality. The advancements in carbon fiber technology that are required to achieve this production scale-up and cost reduction, are very challenging. The most expensive production step is the conversion of textile-grade polyacrylonitrile (PAN) precursor to carbon fiber. The conversion takes place in three main stages: stabilization, low and high temperature carbonization. Most of the research to date has focused on the stabilization of the PAN precursors and oxidized PAN fibers. Comparingly little effort has been dedicated to the investigation of processing conditions during low temperature (LT) carbonization. During this stage of fiber conversion, the largest fiber mass loss occurs, and the fundamental carbon fiber structure and material properties are established. The understanding of the conversion processes in the LT furnace, and the effects of spatial and temporal variations of the LT process parameters on the carbon fiber properties are necessary to identify possible process improvements and cost savings. The objective of this research was to develop computational models for gas flow and energy transport in the gas and fiber phases of the LT furnace, and to couple them with the fiber conversion process models. The model is implemented in the three-dimensional framework that enables analysis of process condition variations in all directions. The formulation is based on modified transport equation to simulate steady state conditions and thus significantly reduce computational effort associated with transient methods. The model is implemented in open source computational fluid dynamics (CFD) code OpenFOAM. The model has been demonstrated on a prototype carbon fiber LT furnace and can be extended to other geometries and process conditions. Extensions to other physical effects, such as accounting evolution of multiple gas species, and fiber tensioning are straightforward. The model uses High Performance Computing (HPC) capabilities of OpenFOAM and can be implemented on multi-processor workstations or mid-size computer clusters common in the industrial setting.

36 MATERIALS SCIENCE↗

Registration of a synthetic aperture radar image to Thematic Mapper imagery for remote sensing applications

Multiple Thematic Mapper multitemporal acquisitions from Landsat and one synthetic-aperture radar acquisition from Seasat have been precisely registered using Johnson Space Center registration processors. The registered images have been output in the Universal Transverse Mercator projection. The procedure to accomplish such disparate data processing tasks and the registration accuracy evaluation are discussed.

Yao, S. S.↗

Efficiently modeling neural networks on massively parallel computers

Neural networks are a very useful tool for analyzing and modeling complex real world systems. Applying neural network simulations to real world problems generally involves large amounts of data and massive amounts of computation. To efficiently handle the computational requirements of large problems, we have implemented at Los Alamos a highly efficient neural network compiler for serial computers, vector computers, vector parallel computers, and fine grain SIMD computers such as the CM-2 connection machine. This paper describes the mapping used by the compiler to implement feed-forward backpropagation neural networks for a SIMD (Single Instruction Multiple Data) architecture parallel computer. Thinking Machines Corporation has benchmarked our code at 1.3 billion interconnects per second (approximately 3 gigaflops) on a 64,000 processor CM-2 connection machine (Singer 1990). This mapping is applicable to other SIMD computers and can be implemented on MIMD computers such as the CM-5 connection machine. Our mapping has virtually no communications overhead with the exception of the communications required for a global summation across the processors (which has a sub-linear runtime growth on the order of O(log(number of processors)). We can efficiently model very large neural networks which have many neurons and interconnects and our mapping can extend to arbitrarily large networks (within memory limitations) by merging the memory space of separate processors with fast adjacent processor interprocessor communications. This paper will consider the simulation of only feed forward neural network although this method is extendable to recurrent networks.

Farber, Robert M.↗

Non Radiation Hardened Microprocessors in Spaced Based Remote Sensing Systems

The CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations) mission is a comprehensive suite of active and passive sensors including a 20Hz 230mj Nd:YAG lidar, a visible wavelength Earth-looking camera and an imaging infrared radiometer. CALIPSO flies in formation with the Earth Observing System Post-Meridian (EOS PM) train, provides continuous, near-simultaneous measurements and is a planned 3 year mission. CALIPSO was launched into a 98 degree sun synchronous Earth orbit in April of 2006 to study clouds and aerosols and acquires over 5 gigabytes of data every 24 hours. The ground track of one CALIPSO orbit as well as high and low intensity South Atlantic Anomaly outlines is shown. CALIPSO passes through the SAA several times each day. Spaced based remote sensing systems that include multiple instruments and/or instruments such as lidar generate large volumes of data and require robust real-time hardware and software mechanisms and high throughput processors. Due to onboard storage restrictions and telemetry downlink limitations these systems must pre-process and reduce the data before sending it to the ground. This onboard processing and realtime requirement load may mean that newer more powerful processors are needed even though acceptable radiation-hardened versions have not yet been released. CALIPSO's single board computer payload controller processor is actually a set of four (4) voting non-radiation hardened COTS Power PC 603r's built on a single width VME card by General Dynamics Advanced Information Systems (GDAIS). Significant radiation concerns for CALIPSO and other Low Earth Orbit (LEO) satellites include the South Atlantic Anomaly (SAA), the north and south poles and strong solar events. Over much of South America and extending into the South Atlantic Ocean the Van Allen radiation belts dip to just 200-800km and spacecraft entering this area are subjected to high energy protons and experience higher than normal Single Event Upset (SEU) and Single Event Latch-up (SEL) rates. Although less significant, spacecraft flying in the area around the poles experience similar upsets. Finally, powerful solar proton events in the range of 10MeV/10pfu to 100MeV/1pfu as are forecasted and tracked by NOAA's Space Environment Center in Colorado can result in Single Event Upset (SEU), Single Event Latch-up (SEL) and permanent failures such as Single Event Gate Rupture (SEGR) in some technologies. (Galactic Cosmic Rays (GCRs) are another source, especially for gate rupture) CALIPSO mitigates common radiation concerns in its data handling through the use of redundant processors, radiation-hardened Application Specific Integrated Circuits (ASIC), hardware-based Error Detection and Correction (EDAC), processor and memory scrubbing, redundant boot code and mirrored files. After presenting a system overview this paper will expand on each of these strategies. Where applicable, related on-orbit data collected since the CALIPSO initial boot on May 4, 2006 will be noted.

Decoursey, Robert J.↗

Parallel Computation of the Jacobian Matrix for Nonlinear Equation Solvers Using MATLAB

Demonstrating speedup for parallel code on a multicore shared memory PC can be challenging in MATLAB due to underlying parallel operations that are often opaque to the user. This can limit potential for improvement of serial code even for the so-called embarrassingly parallel applications. One such application is the computation of the Jacobian matrix inherent to most nonlinear equation solvers. Computation of this matrix represents the primary bottleneck in nonlinear solver speed such that commercial finite element (FE) and multi-body-dynamic (MBD) codes attempt to minimize computations. A timing study using MATLAB's Parallel Computing Toolbox was performed for numerical computation of the Jacobian. Several approaches for implementing parallel code were investigated while only the single program multiple data (spmd) method using composite objects provided positive results. Parallel code speedup is demonstrated but the goal of linear speedup through the addition of processors was not achieved due to PC architecture.

Rose, Geoffrey K.↗

SCIP: a single-cell image processor toolbox

Abstract Summary Each cell is a phenotypically unique individual that is influenced by internal and external processes, operating in parallel. To characterize the dynamics of cellular processes one needs to observe many individual cells from multiple points of view and over time, so as to identify commonalities and variability. With this aim, we engineered a software, ‘SCIP’, to analyze multi-modal, multi-process, time-lapse microscopy morphological and functional images. SCIP is capable of automatic and/or manually corrected segmentation of cells and lineages, automatic alignment of different microscopy channels, as well as detect, count and characterize fluorescent spots (such as RNA tagged by MS2-GFP), nucleoids, Z rings, Min system, inclusion bodies, undefined structures, etc. The results can be exported into *mat files and all results can be jointly analyzed, to allow studying not only each feature and process individually, but also find potential relationships. While we exemplify its use on Escherichia coli, many of its functionalities are expected to be of use in analyzing other prokaryotes and eukaryotic cells as well. We expect SCIP to facilitate the finding of relationships between cellular processes, from small-scale (e.g. gene expression) to large-scale (e.g. cell division), in single cells and cell lineages. Availability and implementation http://www.ca3-uninova.org/project_scip Supplementary information Supplementary data are available at Bioinformatics online.

Martins, Leonardo (ORCID:0000000333512910)↗

Multiple-input land-use system concept

Image based information system would accept data in a variety of formats and convert it to registered raster-scan with single format. Images could then be manipulated by system processor to read out desired information. Existing methods of digital-image processing could be modified to develop necessary software and hardware needed to implement system.

Billingsley, F. C.↗

Computational capacity in hydrodynamic real-time hybrid simulation applied to simulate the dynamic response of floating offshore wind turbines

Real-time hybrid simulation (RTHS) mitigates similitude distortions in model-scale tests of floating offshore wind turbines (FOWTs) by coupling physical experiments with numerical models in real time. The coupling requires faster-than-real-time numerical computations to satisfy temporal similitude with the physical experiment, presenting a bottleneck for using more complex numerical models in RTHS. This paper presents a hydrodynamic-RTHS (hydro-RTHS) framework for FOWTs that simulates the hydrodynamics physically and the aerodynamics numerically with sensor feedback from the physical testing. The framework adapts the three-loop hardware architecture to leverage greater computational resources and mitigate strict temporal requirements, enabling more computationally demanding numerical analyses in hydro-RTHS. The three-loop hardware architecture integrates multiple machines, each dedicated to either numerical analysis or RTHS controls, with a rate-transition algorithm to synchronize the tasks executed across the different machine processors. Virtual and physical tests verified and validated the hydro-RTHS framework, respectively. The ”virtual” tests, which approximates the physical domain numerically, verified the RTHS framework with respect to a numerical full-scale complete FOWT model simulated in the open-source software, OpenFAST. The virtual tests were able to maintain comparable control signals while enabling greater computational resources for the numerical calculations. Real-world physical tests demonstrated that the hydro-RTHS framework computes aerodynamic forces similar to the complete OpenFAST model, validating the hydro-RTHS framework using the three-loop hardware architecture. Findings show that the hydro-RTHS framework with the three-loop hardware architecture is computationally efficient, with reserve capacity to simulate more complex problems due to the customized software, hardware, and rate-transition algorithm.

17 WIND ENERGY↗

Fast DRR generation for 2D to 3D registration on GPUs

Purpose: The generation of digitally reconstructed radiographs (DRRs) is the most time consuming step on the CPU in intensity based two-dimensional x-ray to three-dimensional (CT or 3D rotational x-ray) medical image registration, which has application in several image guided interventions. This work presents optimized DRR rendering on graphical processor units (GPUs) and compares performance achievable on four commercially available devices. Methods: A ray-cast based DRR rendering was implemented for a 512 Multiplication-Sign 512 Multiplication-Sign 72 CT volume. The block size parameter was optimized for four different GPUs for a region of interest (ROI) of 400 Multiplication-Sign 225 pixels with different sampling ratios (1.1%-9.1% and 100%). Performance was statistically evaluated and compared for the four GPUs. The method and the block size dependence were validated on the latest GPU for several parameter settings with a public gold standard dataset (512 Multiplication-Sign 512 Multiplication-Sign 825 CT) for registration purposes. Results: Depending on the GPU, the full ROI is rendered in 2.7-5.2 ms. If sampling ratio of 1.1%-9.1% is applied, execution time is in the range of 0.3-7.3 ms. On all GPUs, the mean of the execution time increased linearly with respect to the number of pixels if sampling was used. Conclusions: The presented results outperform other results from the literature. This indicates that automatic 2D to 3D registration, which typically requires a couple of hundred DRR renderings to converge, can be performed quasi on-line, in less than a second or depending on the application and hardware in less than a couple of seconds. Accordingly, a whole new field of applications is opened for image guided interventions, where the registration is continuously performed to match the real-time x-ray.

07 ISOTOPE AND RADIATION SOURCES↗

Vectorised Computation of Diverging Ensembles. In: ICPP 2018 Proceedings of the 47th International Conference on Parallel Processing, Article No. 51

Ensemble computations are used to evaluate a function for multiple inputs, for example in uncertainty quantification. Embedded ensemble computations perform several evaluations within the same program, often enabling a reduced overall runtime by exploiting vectorisation and parallelisation opportunities that are not present in individual ensemble members. This is challenging if members take different control flow paths. We present a source-to-source transformation that turns a given C program into an embedded ensemble program that computes members in a single-instruction-multiple-data fashion using OpenMP SIMD pragmas. We use techniques from whole-function vectorisation, achieving effective vectorisation for moderate amounts of branch divergence, particularly on processors with masked instructions such as recent Xeon Phi or Skylake processors with AVX-512.

Hückelheim, Jan↗

The magnetic-field investigation on ISPM

The International Solar Polar Mission (ISPM) onboard instrumentation for the magnetic field experiment to establish, on the basis of in-situ observations, the heliolatitude dependence of the interplanetary magnetic field, is described. The prime output consists of vector measurements, made by two triaxial magnetometers, of the ambient magnetic field along the orbit of the spacecraft. The onboard data processor generates two data streams to be transmitted through the spacecraft telemetry. The low speed, analog data stream consists of averaged and despun vector measurements, digitized in the spacecraft analog to digital converter (ADC). The despinning algorithm used in the analog processor is described. The high speed, digital data stream consists of vector measurements digitized in the instrument ADCs, generating up to two vector samples per sec. Multiple data-path switching is used to increase system reliability and to allow cross calibration of the ADCs. On board facilities for inflight calibration are described.

Balogh, A.↗

Hardware for a real-time multiprocessor simulator

The hardware for a real time multiprocessor simulator (RTMPS) developed at the NASA Lewis Research Center is described. The RTMPS is a multiple microprocessor system used to investigate the application of parallel processing concepts to real time simulation. It is designed to provide flexible data exchange paths between processors by using off the shelf microcomputer boards and minimal customized interfacing. A dedicated operator interface allows easy setup of the simulator and quick interpreting of simulation data. Simulations for the RTMPS are coded in a NASA designed real time multiprocessor language (RTMPL). This language is high level and geared to the multiprocessor environment. A real time multiprocessor operating system (RTMPOS) has also been developed that provides a user friendly operator interface. The RTMPS and supporting software are currently operational and are being evaluated at Lewis. The results of this evaluation will be used to specify the design of an optimized parallel processing system for real time simulation of dynamic systems.

Blech, R. A.↗

A software toolbox for robotics

A method for programming cooperating manipulators, which is guided by a geometric description of the task to be performed, is given. For this a suitable language must be used and a method for describing the workplace and the objects in it in geometric terms. A task level command language and its implementation for concurrently driven multiple robot arm is described. The language is suitable for driving a cell in which manipulators, end effectors, and sensors are controlled by their own dedicated processors. These processors can communicate with each other through a communication network. A mechanism for keeping track of the history of the commands already executed allows the command language for the manipulators to be event driven. A frame based world modeling system is utilized to describe the objects in the work environment and any relationships that hold between these objects. This system provides a versatile tool for managing information about the world model. Default actions normally needed are invoked when the data base is updated or accessed. Most of the first level error recovery is also invoked by the database by utilizing the concepts of demons. The package can be utilized to generate task level commands in a problem solver or a planner.

Sanwal, J. C.↗