Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Molten”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Corrosion mechanism of cold forged 316 stainless steel in molten FLiNaK salt

This study examined how cold forging (CF) affects the corrosion of 316 stainless steel (SS) in molten FLiNaK salt at 700 °C for 48 h. CF samples had two corrosion areas: one near the top and another displaying intergranular corrosion (IGC). Samples with lower CF (5–30 %) showed more IGC, while the 50 % CF sample had less IGC but the shallowest corrosion depth. This was due to the increased number of grain boundaries, which raised the potential corrosion initiation sites, and certain grain boundaries promoting chromium dissolution, thus enhancing IGC.

FLiNaK↗
DOE OSTI2025

Hot corrosion behavior of 304 & P91 graded composite transition joint under molten sulfate salts

A novel graded composite transition joint (GCTJ) between AISI 304 stainless steel and ASTM A335 P91 steel, has been demonstrated remarkablely superior creep performance compared to the conventional dissimilar metal weldment (DMW) under equivalent conditions. However, this advance is challenged by hot corrosion under salt deposition at elevated temperatures. Here, this study investigates the hot corrosion behavior of 304&P91 GCTJ exposed to sulfate salts at 700°C. Compared to the 304 steel, corrosion attacks initiate in the P91 triangle, where the dual-phase microstructure of ferrite and tempered martensite significantly influences pitting initiation. Anodic dissolution mainly occurs within the tempered martensite due to more vulnerable sites within the tempered martensite. With prolonged exposure, corrosion propagates across both phases, and the corrosion depth within the P91 triangle is related to the exposed surface area ratio between 304 and P91. Electrochemical analysis reveals the occurrence of galvanic corrosion between the 304 and P91, with a positive linear relationship between anodic dissolution current density (I a ) and the exposed surface area ratio between 304 and P91 in molten salts, further emphasizing the critical impact of this ratio on the corrosion severity in the P91 triangle. These findings underscore the importance of transition zone design optimization in mitigating localized corrosion.

Galvanic corrosion↗
DOE OSTI2024

Reactive Fe anode for electrolytic reduction of solid metal oxide in molten LiCl-Li 2 O

Iron metal was investigated for use as a consumable anode for electrolytic reduction of solid metal oxides in molten LiCl-Li 2 O (2.0 - 2.4 wt%). Tests were performed where the potential of Fe anodes was increased incrementally from 0.1 to 1.0 V (vs Ni/NiO). Oxide formation on the anode started at a potential of 0.4 V and was identified as FeO via X-ray diffraction. In the absence of a pre-formed oxide layer, severe attack of the anode started at a potential of 0.7 V and was accompanied by an increase in Fe concentration in the salt. When an oxide layer was allowed to form on the anode, the Fe concentration did not increase in the salt. O 2 was detected in the headspace gas at an anode potential of 1.0 V only when an oxide layer was present on the anode. Finally, the results of this study support the idea that an inexpensive sacrificial anode could be an ideal replacement for expensive Pt that is currently widely used for this process.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Preparation of a uranium monocarbide anode and electrochemical characterization in molten LiCl-KCl-UCl 3

Porous uranium carbide (UC) pellets possessing moderate electrical conductivity were synthesized by reaction of UO 2 with graphite at temperatures up to 1550°C under rough vacuum. Conversions as high as 98% were achieved at soak times of 2-4 hours. The electrochemistry of the UC pellets in molten LiCl-KCl-6.5 wt% UCl 3 was explored using a variety of techniques including DC polarization methods, cyclic voltammetry, chronopotentiometry and bulk electrolysis. Here, the electrode reaction for anodic dissolution was found to be kinetically controlled by dissociation of UC to a transition state complex that was hypothesized to consist of a uranium atom partially complexed by chloride ions. Precise measurements of current efficiencies using chronopotentiometry indicated upper limits of 90.9 ± 3.4% and 98.3 +1.7/-3.7% for anode and cathode, respectively, when operating at anodic overpotentials near +300 mV. Bulk electrolysis of a UC pellet performed by passing 98% of the theoretical charge resulted in nearly complete recovery of its uranium content as highly pure metal at the cathode.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Be₂C as a neutron moderator for molten salt reactors: A first-principles study of structural, electronic, and defect properties

Beryllium carbide (Be 2 C), valued for its high neutron moderation efficiency and low absorption cross section, is a promising high-temperature neutron moderator for molten salt reactors. Its practical adoption, however, demands significant technological maturation, requiring comprehensive theoretical and experimental studies of its response to different conditions, including high temperature and irradiation. Here, we report initial results on the fundamental properties and radiation-induced defects of Be 2 C, focusing on antisites, vacancies, interstitial atoms, and Frenkel pairs in the Be and C sublattices. Using density functional theory (DFT) and ab initio molecular dynamics (AIMD), we calculate the defects formation and binding energies, evaluating their dependence on the supercell size, charge states, and chemical environment. In general, carbon defects exhibit higher formation energies, greater sensitivity to cell size, and stronger impacts on the density of states compared to beryllium defects, with charged state the effects being more pronounced. Static DFT reveals multiple metastable interstitial configurations, while AIMD identifies ground states as C-C <100> dumbbells and octahedral Be interstitials. In conclusion, the diversity of metastable configurations and defect states complicates the diffusion mechanisms, requiring further molecular dynamics analysis to elucidate the mechanisms and rates of radiation-induced atomic transport, as well as the structural stability of Be2C.

Ab initio modeling↗
DOE OSTI2021

Characterization of the molten salt FMgNaK through ab initio molecular dynamics and experimental density measurements

The selection of a salt species for use in a molten salt reactor MSR is a key part of any MSR design. However, many salts have sparse or no thermophysical property data sets, especially those with higher melting points. One such salt is the eutectic mixture of (NaF)0.345(KF)0.59(MgF 2 )0.065, or FMgNaK, and is explored here through ab initio molecular dynamics (AIMD) simulation (1023-1273K) as well as experimental measurement of the liquid density using the Archimedean method (973-1223K). Predicted densities from AIMD are similar to experimentally-measured densities, though with more noise, suggesting that the small scale necessitated by AIMD simulations may be problematic for simulating FMgNaK in particular. Here the coefficient of thermal expansion is predicted from simulation, and salt structure is characterized. Mg-F-Mg chaining is observed in the salt network, though the low concentration of Mg inhibits chaining on the scale that is observed in (LiF) 0.67 (BeF 2 ) 0.33 , or FLiBe.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Corrosion of 316L & 316H stainless steel in molten LiF-NaF-KF (FLiNaK)

The corrosion behavior of 316L and 316H stainless steels (low and high carbon, respectively) in molten LiF-NaF-KF (FLiNaK) salt at 700 °C for 500 h has been investigated. Tests were performed in 316L stainless steel, pyrolytic boron nitride, and glassy carbon capsule materials. The capsule material had a notable effect on the corrosion behavior of the two stainless steels. Further, the modes of corrosion for the two types of stainless steel in various capsule materials were classified into three categories, namely, uniform surface recession, selective grain boundary Cr dissolution, and the dissolution of Cr in the bulk grains. By most metrics, the 316H stainless steel exhibited slightly superior corrosion resistance, while by others the two stainless steels were comparable. These differences in corrosion behavior are attributed to the differences in grain size and the degree of sensitization.

36 MATERIALS SCIENCE↗
DOE OSTI2023

An ab initio molecular dynamics study of varied compositions of the $\text{LiF-NaF-KF}$ molten salt

With increasing interest in molten salt reactors, there becomes a demand for investigations into thermophysical properties of salt systems. The LiF-NaF-KF (FLiNaK) salt system is a primary candidate for use in these reactors. However, the thermophysical properties of compositions outside the eutectic composition are still largely unknown. In this article, properties of ten unique compositions, including four ternary compositions, are investigated using ab initio molecular dynamics simulations across five temperatures between 900 K and 1300 K. The properties of interest are the density, thermal expansion, bulk modulus, compressibility, heat capacity, and enthalpy of mixing. In general, the results were found to be in good agreement with other literature and experimental results. The density and heat capacity had a tendency to be slightly underpredicted. No conclusions could be drawn about the bulk modulus and compressibility in terms of compositional dependence. The thermal expansion had a negative trend with respect to the LiF concentration and no trends were observed for the NaF or KF concentration. The enthalpy of mixing shows minima for the ternary compositions, with the near-equiatomic composition exhibiting the lowest values. Here this work shows the potential for compositional tailoring in the FLiNaK system to optimize thermophysical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Sensitivity study of parameters important to Molten Salt Reactor Safety

This paper presents a molten salt reactor (MSR) design parameter sensitivity study using a nodal dynamic modelling methodology with explicitly modified point kinetics equation and Mann’s model for heat transfer. Six parameters that can impact MSR safety are evaluated. A MATLAB-Simulink model inspired by Thorcon’s 550MW th MSR is used for parameter evaluations. A safety envelope was formed to encapsulate power, maximum and minimum temperature, and temperature-induced reactivity feedback. The parameters are perturbed by ±30%. The parameters were then ranked by their subsequent impact on the considered safety envelope, which ranks acceptable parameter uncertainty. The model is openly available on GitHub.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

A safeguards approach for molten salt reactors: Direct gamma-spectrometry of 233 U

Multidimensional gamma-spectrometry is a potential solution for safeguarding future thorium-fueled molten salt reactors (MSRs). A high-sensitivity system developed at Pacific Northwest National Laboratory (PNNL), the Advanced Radionuclide Gamma spectrOmeter (ARGO), has demonstrated direct 233 U assay in freshly irradiated fuel salt samples using a dual-detector configuration and the 97.1 keV gamma-emission. These measurements were made using 1.4 x 10 6 Bq of 233 U activity (at 1.4 x 10 8 fissions), at relatively high dead times (10.4%), and using short count durations of ~800 s. Other major emissions were also evaluated (42.5 keV, 54.7 keV, 146.4 keV), in additional to limited (1.96%) Compton suppression, but provided less consistent determination of the 233 U activity. Accurate 233 U measurement was also demonstrated using its four coincidence gamma-emissions (42.5 keV, 54.7 keV; 42.5 keV, 278.1 keV; 146.4 keV, 174.2 keV; 146.4 keV, 219 keV). Further improvements in coincidence measurements may be achievable with improvements in the detector configuration and nuclear data. Whilst this demonstration utilized the ARGO laboratory system, a similar dual-detector configuration could be utilized for online safeguards measurements.

Gamma-spectrometry↗
DOE OSTI2020

Radiative heat transfer in FLiBe molten salt participating medium in a vertical heated tube under forced and mixed convection laminar flows

The contribution of radiative heat transfer (RHT) to convective heat transfer in a heated vertical pipe with laminar flow and constant wall temperature, for FLiBe molten salt, is investigated computationally. The combined effects of conduction in the fluid, forced convection, buoyancy, temperature-dependent physical properties, and thermal radiation are investigated. The P1 approximation is employed in the discretization of the Radiative Transfer Equation (RTE). The COMSOL Multiphysics software is used to generate the numerical solutions. The theoretical analysis developed here demonstrates that only for intermediate values of the optical thickness, i.e. τ D ~ O 1 , the participating media effects are expected to be important. This analysis is confirmed computationally and a value of τ D ≈ 4 is shown to lead to the highest increase in overall heat transfer behavior. Under forced convection, the Nusselt ratio N u total / N u no - rad reaches a peak value of 1.76 at τ D = 4 and z/D = 200 , and is less than 1.1 for τ D < 0 . 1 and τ D > 60 . Under aiding-flow mixed convection, N u total / N u no - rad reaches a peak of 1.34 at τ D = 4 . 2 and is less than 1.1 for τ D < 0 . 4 and τ D > 36 . Under opposing-flow mixed convection, Nu total / Nu no - rad reaches a peak of 1.81 at τ D = 4 . 2 and is less than 1.1 for τ D < 0 . 2 and τ D > 50 . RHT effects on the overall heat transfer are most pronounced in opposing mixed convection, where N u total / N u no - rad is 2.26 observed at z/D = 50 . The sensitivity to wall emissivity is evaluated; in forced convection, the peak N u total / N u no - rad is 1.66 at ε = 0 (reflective wall) and 2.04 at ε = 1 (absorptive wall). Finally, the sensitivity to pipe diameter is also discussed. Overall, for a vertical heated tube, radiative heat transfer effects lead to enhancement of heat transfer by as high as a factor of two, and they depend on the optical thickness of the flow, mixed convection environment ( Gr / R e 2 and direction of flow relative to the gravitational force), surface emissivity, and entrance effects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Investigation of neutron noise in a micro-scale, natural circulation molten salt fission battery system

The Molten Salt Reactor (MSR) concept is a rapidly evolving Generation IV design that has recently attracted favorable attention due to the potential for reducing waste generation, realizing passive safety features, and seizing on the opportunity for cost effective economics. A specific novel micro-MSR, natural circulation, battery design concept involves placing all primary components within a single reactor vessel containment without the need of primary forced pumping. This small modular, integral design presents potential cost savings while producing safety, reliable, and transportable carbon-free power for decades. This investigation evaluates the neutron noise induced by density and flow fluctuations in a natural circulation MSR battery concept being developed at the University of Idaho. This study finds numerical solutions to the one-dimensional, one-group, coupled diffusion equations for a bare, homogeneous core, and evaluates neutron flux and delayed neutron precursor concentration noise due to core flow and fuel salt density perturbation sources. Noise analysis shows both point kinetic and space-dependent behavior is present despite the small size, low-flow, closely-coupled nature of the natural circulation MSR concept. Analysis shows that the low flow of the convective system results in noise behavior typically representative of a larger forced-circulation MSR system. Finally, noise techniques may also be useful in MSR core diagnostics as a non-invasive, low-cost radiological option to traditional monitoring schemes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Numerical analysis of dynamic load following response in a natural circulation molten salt power reactor system

The Molten Salt Reactor (MSR) concept is a rapidly evolving Generation IV design that has recently attracted favorable attention due to the potential for reducing waste generation, realizing passive safety features, and seizing on the opportunity for cost effective economics. An investigation into the power transient behavior of an autonomous load-following, closed-loop, natural circulation MSR system is important to quantifying operational and safety performance under dynamic conditions. This paper presents the results of a STAR-CCM+ and a comparatively simple asymmetric, one-dimensional, numerical model to solve the compound dynamic MSR power behavior subject to flow and temperature reactivity feedback only. Results show that reactor power is affected by fuel salt flow velocity (global) and temperatures (local bulk volume averages) in a coupled, time-delayed manner that results in a unique compound dynamic, closed-loop power feedback mechanism. The 1-D simulation approach opens the possibility of performing inexpensive computations to evaluate time-dependent reactor performance relative to thermo-physical fuel salt limitations. Results also potentially motivate a convincing conclusion that natural circulation MSRs provide a leap in safety and reliability.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Government sector activities to reduce thermal-spectrum molten salt breeder reactor investment risk

Thermal-Spectrum Molten Salt Breeder Reactors (TS-MSBRs) have long been recognized as having high potential for clean, safe, large-scale, cost-effective energy production for the foreseeable future. U.S. government support for TS-MSBR development was stopped half a century ago in the belief that they were too technically difficult. Technology progression over the past several decades as well as the pressing need for clean power on-demand provides incentives to reconsider the development program cancellation. Limited, early-stage, government sector activities have the potential to sufficiently reduce investor risk to trigger the private sector investment necessary to commercialize the reactor class. In conclusion, these activities are summarized in this article.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Disruptive thermal-spectrum molten salt breeder reactor fuel cycle technologies

Multiple, disruptive fuel salt processing technologies for thermal-spectrum molten salt breeder reactors (TS-MSBRs) have been conceived of and brought to laboratory levels of maturity since the termination of the historic U.S. government program. This paper describes these technologies and the role that they could serve in decreasing the remaining technical risks for TS-MSBR deployment. In conclusion, the focus of the paper is on describing how the technologies could integrate into a dramatically simpler, proliferation resistant fuel salt processing system as well as identifying remaining development hurdles.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Characterizing pulse reverse-pulse uranium recovery in molten LiCl-KCl with intermittent electrochemical impedance spectroscopy

In this work, EIS was applied to characterize the temporal recovery of uranium from UCl 4 onto a tungsten electrode in molten LiCl-KCl salt between sets of pulse reverse-pulse (PRP) deposition steps. Impedance measurements were fitted to an equivalent circuit (EC) model of the electrode interface using Simplex optimization to calculate the double layer capacitance, charge transfer resistance, Warburg impedance, and CPE-restricted diffusion. Diffusion of uranium towards the electrode surface dominated the surface interactions for the first 80 cycles, followed by a transition to kinetic control for the remaining 520 cycles. A decrease in the Warburg impedance showed depletion of uranium from the bulk melt, which was confirmed to be a 52.5% reduction through ICP-OES. Reduction in the phasance from CPE-restricted diffusion suggested the formation of pores in the uranium deposits, which was confirmed through SEM characterization.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Molten salt electrolysis and room temperature ionic liquid electrochemical processes for refining rare earth metals: Environmental and economic performance comparison

Circularizing end of life products such as electronic waste can open a new source for rare earth elements (REEs) that will decrease the demand pressure on conventional virgin production. The last step to produce REEs consists of a refining process to convert rare earth oxide (REO) to REE metal. One promising technology is processing REO via a room temperature ionic liquid, which is characterized by low energy requirements in contrast to existing REEs extraction processes. In this work, life cycle and techno-economic assessments are performed and compared against molten salt electrolysis. Here, the results show that both processes have advantages and disadvantages in terms of environmental performance, and that they are similarly competitive in terms of economic performance. A breakeven analysis suggests that future research should focus on coupling the production of REOs with the refining processes to attempt to lower REO cost and make them economically feasible in the U.S.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An additively-manufactured molten salt-to-supercritical carbon di-oxide primary heat exchanger for solar thermal power generation – Design and techno-economic performance

The design and techno-economic performance of a compact additively manufactured (AM) molten salt (MS)-to-supercritical carbon di-oxide (sCO2) primary heat exchanger (PHE) for solar thermal application is described. The PHE design consists of sCO2 flow through an array of microscale pin fins while the MS flows through mm-scale rectangular channels. Constraints imposed by AM using laser powder bed fusion method are considered in the design. Structural and fluid flow simulations are performed to arrive at a viable design of the core and headers. A simplified one-dimensional steady state model for the PHE is developed including the impact of surface roughness from the AM process. A process-based cost model is used to determine the tradeoff between thermofluidic design and manufacturing cost. A parametric study is performed using the thermo-fluidic and cost models to determine the set of geometrical and flow variables that result in high power density and low cost, while restricting the pressure drop on the sCO2 side to less than 2% of line pressure. Flow rates of MS and sCO2 were varied over heat capacity rate ratios ranging from 0.2 to 1. Results indicate that it is possible to design a low-pressure drop AM PHE with an effectiveness of 90% and a power density in excess of 10 MW/m3 (including headers). Fabrication of representative nickel superalloy specimens are shown to demonstrate that low-porosity parts with the requisite dimensional tolerance of PHE core can be generated.

14 SOLAR ENERGY↗