Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mixture modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Numerical and Experimental Investigations on the Ignition Behavior of OME

On the path towards climate-neutral future mobility, the usage of synthetic fuels derived from renewable power sources, so-called e-fuels, will be necessary. Oxygenated e-fuels, which contain oxygen in their chemical structure, not only have the potential to realize a climate-neutral powertrain, but also to burn more cleanly in terms of soot formation. Polyoxymethylene dimethyl ethers (PODE or OMEs) are a frequently discussed representative of such combustibles. However, to operate compression ignition engines with these fuels achieving maximum efficiency and minimum emissions, the physical-chemical behavior of OMEs needs to be understood and quantified. Especially the detailed characterization of physical and chemical properties of the spray is of utmost importance for the optimization of the injection and the mixture formation process. The presented work aimed to develop a comprehensive CFD model to specify the differences between OMEs and dodecane, which served as a reference diesel-like fuel, with regards to spray atomization, mixing and auto-ignition for single- and multi-injection patterns. The simulation results were validated against experimental data from a high-temperature and high-pressure combustion vessel. The sprays’ liquid and vapor phase penetration were measured with Mie-scattering and schlieren-imaging as well as diffuse back illumination and Rayleigh-scattering for both fuels. To characterize the ignition process and the flame propagation, measurements of the OH* chemiluminescence of the flame were carried out. Significant differences in the ignition behavior between OMEs and dodecane could be identified in both experiments and CFD simulations. Liquid penetration as well as flame lift-off length are shown to be consistently longer for OMEs. Zones of high reaction activity differ substantially for the two fuels: Along the spray center axis for OMEs and at the shear boundary layers of fuel and ambient air for dodecane. Additionally, the transient behavior of high temperature reactions for OME is predicted to be much faster.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Demystifying the Resilience of Large Language Models: An End-to-End Perspective

Deep neural networks are known to be resilient to random bit-wise faults in their parameters. However, this resilience has primarily been established through evaluations of classification models. The extent to which this claim holds for large-language models remains underexplored. In this work, we conduct an extensive measurement study on the impact of random bitwise faults in commercial-scale language models. We perform an in-depth analysis of the resulting generation outputs. We first expose that these language models are not truly resilient to random bit-flips. While aggregate metrics such as accuracy may suggest resilience, an in-depth inspection of the generated outputs shows significant degradation in text quality. Our analysis also shows that tasks requiring more complex reasoning suffer more from performance and quality degradation. Moreover, we extend our analysis to models with augmented reasoning capabilities, such as Chain-of-Thought or Mixture of Experts architectures, and characterize their failure scenarios under random bit-flips.

Sun, Yu↗
DOE OSTI2023

Modeling the co-assembly of binary nanoparticles

Abstract In this work, we present a binary assembly model that can predict the co-assembly structure and spatial frequency spectra of monodispersed nanoparticles with two different particle sizes. The approach relies on an iterative algorithm based on geometric constraints, which can simulate the assembly patterns of particles with two distinct diameters, size distributions, and at various mixture ratios on a planar surface. The two-dimensional spatial-frequency spectra of the modeled assembles can be analyzed using fast Fourier transform analysis to examine their frequency content. The simulated co-assembly structures and spectra are compared with assembled nanoparticles fabricated using transfer coating method are in qualitative agreement with the experimental results. The co-assembly model can also be used to predict the peak spatial frequency and the full-width at half-maximum bandwidth, which can lead to the design of the structure spectra by selection of different monodispersed particles. This work can find applications in fabrication of non-periodic nanostructures for functional surfaces, light extraction structures, and broadband nanophotonics.

Mohanty, Saurav (ORCID:0009000302592855)↗
DOE OSTI2021

Validation of the HyRAM+ physics models for use with propane

The Hydrogen Risk Assessment Model Plus (HyRAM+) toolkit combines quantitative risk assessment with simulations of unignited dispersion, ignited turbulent diffusion flames, and indoor accumulation with delayed ignition of fuels. HyRAM+ is differentiated from HyRAM in that it includes models and leak data for other alternate fuels. The models of the physical phenomena need to be validated for each of the fuels in the toolkit. This report shows the validation for propane which is being used as a surrogate for autogas, which is a mixture of propane and butane and used in internal combustion engines in vehicles. For flame length comparisons, five previously published experiments from peer reviewed journals were used to validate our models. The validation looked at flame lengths and flame widths with respect to different leak diameters, mass flow rates, and source pressures. Most of the sources included more than one set of experimental data, which were collected using different methods (CCD cameras, IR visualization etc.). In general, HyRAM+ overpredicts the flame lengths by around 65%. For heat and radiation models, we compared the heat flux and radiation data reported from two different sources to the values calculated by HyRAM+. For higher mass flow rates, the HyRAM+ calculated flame length results gave a better estimate of what is found in the experiments (65% error), but a higher error (85%) is observed between the HyRAM+ calculated lengths and the experimental flame lengthsfor lower mass flows. Some differences can be attributed to outdoor environmental effects (i.e. wind speed) and uncertainties in jet flame shapes. The propane flame trajectory is predicted for a high Reynolds number case with Re = 12,500 and a low Reynolds number case where Re = 2,000. The Re=12,500 case which is momentum dominated matches well with the experimental flame trajectory, but the agreement for the bouancy driven low Reynolds number case is not as good. Dispersion modeling for unignited propane was also analyzed. We compared the mole fraction, mixture fraction, mean velocity, concentration half width, and inverse mass concentration over an axial distance from different credible journals to the values calculated by HyRAM+. The results display good agreement but generally, HyRAM+ predicts a wider profile for mole fraction and mixture fraction experiments. Overall, HyRAM+’s results are reasonable for predicting the flame length, heat flux, flame trajectory, and dispersion for propane and can be used in risk analyses

08 HYDROGEN↗
DOE OSTI2020

Benchmark Solutions for Radiation Transport in Stochastic Media with Inhomogeneous Material Statistics

Accurately solving implicit Monte Carlo (IMC) thermal photon transport problems with mixed material cells is important in realistic applications. The production IMC package at LLNL treats mixed material cells arising from ALE remap and hydrodynamics using the same approximate model. The new Imp IMC thermal photon transport package currently under development has both a material interface reconstruction (MIR) algorithm and a Levermore-Pomraning (LP) stochastic medium algorithm for treating mixed material cells. Existing stochastic medium algorithms for treating mixed material cells in IMC lack a complete theoretical basis. The IMC LP algorithm implementation has been demonstrated to reproduce published deterministic LP solutions for the particular case of spatially homogeneous material statistics. Realistic simulations will include spatially inhomogeneous material statistics (material mean chord lengths). In a previous investigation, the LP-model for transport in binary stochastic media in rod geometry was generalized to accommodate spatially varying material chord lengths, i.e., the mixing statistics were allowed to be nonhomogeneous. Analytical solutions were obtained and used to produce a verifi cation suite for the Imp IMC Levermore-Pomraning implementation for different spatial variations of the chord lengths. However, the accuracy of the LP model when the mixing statistics are nonhomogeneous has not been assessed and leaves open the question of whether local accuracy is improved or further degraded when chord lengths are not uniform. This shortcoming is rectifi ed here by developing benchmark analytic solutions for transport in binary Markovian stochastic mixtures in rod geometry with nonhomogeneous mixing statistics, using spatially varying chord lengths considered in the previous investigation based on the LP model. Methods for sampling a nonhomogeneous Poisson process (NHPP) are first described and used to construct individual realizations of the binary mixtures in rod geometry. Analytic solutions are then obtained for the forward and backward directed fluxes on a given realization, now viewed as a deterministic medium with alternating layers of the two materials with known interface locations. Finally, material averaged scalar fluxes are obtained using these sampling schemes with spatially linear and quadratic chord lengths and used to assess the accuracy of the previously obtained LP-model results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Experimental and DFT Calculated IR Spectra of Guests in Zeolites: Acyclic Olefins and Host-Guest Interactions

We performed experimental and periodic density functional theory (DFT) IR spectroscopy to investigate the adsorption of acyclic olefins over both acidic and non-acidic zeolites. Two conjugated polyenes, 2,4-dimethyl-1,3-pentadiene (I) and 2,6-dimethyl-2,4,6-octatriene (II) were studied to probe organic intermediates that can form during methanol conversion, and that can lead to deactivating species known collectively as “coke.” We computed vibrational spectra using zeolite-adsorbed and gas-phase models for both neutral and protonated forms of I and II, and compared these DFT results to diffuse reflectance IR Fourier transform (DRIFT) spectra of zeolite-guest systems. Our experimental and computational results are precise enough to pinpoint that the gauche s-cis conformation of species I predominates during adsorption over de-aluminated zeolite beta. Computed zeolite-adsorbed spectra of the protonated species I and II best represent the DRIFT spectra obtained after the adsorption of the olefins on HMOR at 20 ?, with computed bands at 1543 and 1562 cm–1 for molecules I+ and II+, respectively, attributed to the allylic stretching mode, ?(C=C–C+). These computed band frequencies are within 6 cm–1 of experimental data and confirm that the interaction between neutral acyclic olefins and acidic zeolites leads to protonation of the olefin. Comparison of computed spectra of the protonated species in the gas phase to those in the zeolite indicates that the electrostatic interaction between alkenyl and alkadienyl cations and negative zeolite framework does not significantly impact the position of the allylic stretching bands. These results highlight that computed spectroscopy and thermodynamics coupled with experimental spectra can be used for elucidating complex mixtures in zeolites, and certain spectral features of adsorbed olefins can be accurately modeled by gas-phase calculations. ACKNOWLEDGMENTS BM and SMA were supported by the National Science Foundation under Award # CBET-1512442. Acknowledgment is made to the Donors of the American Chemical Society Petroleum Research Fund for support (or partial support) of this research (#589978-ND5, EDH and FCJ). MDB was supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences (BES), Division of Materials Science and Engineering. CJM was supported by the DOE, Office of Science, BES, Division of Chemical Sciences, Geosciences, and Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated by Battelle for the U.S. DOE. Computing resources were generously provided through PNNL’s institutional computing (PIC).

Manookian, Babgen↗
DOE OSTI2025

Effect of particle shape on stratification in drying films of binary colloidal mixtures

The role of particle shape in evaporation-induced auto-stratification in polydisperse colloidal suspensions is explored with molecular dynamics simulations of mixtures of spheres and aspherical particles. A unified framework based on the competition between diffusion and diffusiophoresis is proposed to understand the effects of shape and size dispersity. In general, particles diffusing more slowly (e.g., larger particles) tend to accumulate more strongly at the evaporation front. However, larger particles have larger surface areas and therefore greater diffusiophoretic mobility. Hence, they are more likely to be driven away from the evaporation front via diffusiophoresis. For a rapidly dried bidisperse suspension containing small and large spheres, the competition leads to “small-on-top” stratification. Here, we employ a computational model in which the diffusion coefficient is inversely proportional to particle mass. For a mixture of spheres and aspherical particles with similar mass, the diffusion contrast is reduced, and the spheres are always enriched at the evaporation front as they have the smallest surface area for a given mass and, therefore, the lowest diffusiophoretic mobility. Furthermore, for a mixture of solid and hollow spheres that have the same outer radius and thus the same surface area, the diffusiophoretic contrast is suppressed, and the system is dominated by diffusion. Consequently, the solid spheres, which have a larger mass and diffuse more slowly, accumulate on top of the hollow spheres. Finally, for a mixture of thin disks and long rods that differ significantly in shape but have similar mass and surface area, both diffusion and diffusiophoresis contrasts are suppressed, and the mixture does not stratify.

Classical molecular dynamic simulations↗
DOE OSTI2023

Plasma-parameter dependence of ro-vibrational temperatures for H 2 in LHD divertor

We analyzed a thousand visible spectra of Fulcher-α band measured for divertor plasmas in Large Helical Device. With a coronal model and Bayesian inference, the population distribution of hydrogen molecule in the electronic ground state was estimated. The non-thermal population distribution was recovered with a two-temperature model, which has two sets of rotational and vibrational temperatures, as well as their mixture coefficient. The lower rotational temperature significantly changes according to the plasma parameters. Its nearly linear dependence on the electron density was found, which is consistent with previous works. The lower vibrational temperature also shows a small density dependence, as reported by a previous work. On the other hand, the higher rotational and vibrational temperatures as well as the mixture coefficient only show slight changes over the broad range of plasma parameters. These population parameters show a significant correlation; with higher electron density, all the temperatures and the fraction of the higher-temperature component increase simultaneously. In conclusion, this suggests that the electron impact plays an important role to determine the population distribution.

42 ENGINEERING↗
DOE OSTI2021

Probabilistic Deep Learning Approach to Automate the Interpretation of Multi-phase Diffraction Spectra

Autonomous synthesis and characterization of inorganic materials requires the automatic and accurate analysis of X-ray diffraction spectra. For this task, we designed a probabilistic deep learning algorithm to identify complex multi-phase mixtures. At the core of this algorithm lies an ensemble convolutional neural network trained on simulated diffraction spectra, which are systematically augmented with physics-informed perturbations to account for artifacts that can arise during experimental sample preparation and synthesis. In this work, larger perturbations associated with off-stoichiometry are also captured by supplementing the training set with hypothetical solid solutions. Spectra containing mixtures of materials are analyzed with a newly developed branching algorithm that utilizes the probabilistic nature of the neural network to explore suspected mixtures and identify the set of phases that maximize confidence in the prediction. Our model is benchmarked on simulated and experimentally measured diffraction spectra, showing exceptional performance with accuracies exceeding those given by previously reported methods based on profile matching and deep learning. We envision that the algorithm presented here may be integrated in experimental workflows to facilitate the high-throughput and autonomous discovery of inorganic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Predicting Particle-Size Distributions in Fuel-Cell Inks

Prediction of the catalyst-activated carbon particle sizes of fuel-cell inks remains a critical challenge in enhancing the performance and durability of fuel cells. The performance and structural integrity of the catalyst layers in the cell depend not only on the properties of the ionomer, but also on the carbon supports that host the catalyst. To investigate how these carbon aggregate structures form, we present a model that calculates the cooperative size distributions of ionomer and carbon aggregates in various water/alcohol mixtures and compares those results to available experimental data. Aggregation of both the suspended ionomers and the carbon particles is interwoven as the carbon aggregation depends heavily on the ionic strength of its environment, namely protons dissociating from the ionomer’s sulfonic-acid-group side chains. We demonstrate that the surrounding mixed solvent as well as Nafion TM binder concentration strongly influence the degree of aggregation for carbon particles. The validated model provides a framework for exploring aggregation under a wide range of conditions for various electrochemical-technology inks.

Srivastav, Harsh [University of California, Berkel↗
DOE OSTI2022

Particle transport in Markov stochastic mixtures with spatial gradients

Markov geometries are a prototype class of stochastic media that are widely used to model complex disordered systems. In a series of recent works, we have shown that spatially homogeneous (but possibly non-isotropic) Poisson tessellations can be conveniently used in order to generate three-dimensional realizations of Markov media and thus characterize the features of particle transport e.g. in fragmented fuel elements following severe nuclear accidents or Rayleigh-Taylor turbulent mixing for inertial confinement fusion. In this paper we show that Poisson tessellations can be extended to take into account the presence of spatial gradients, which commonly occur in real-world applications due to material stratification. For this purpose, we will provide an explicit construction of spatially-non-homogeneous Poisson tessellations, fully characterize their statistical properties, and finally illustrate the behaviour of particle transport in such random media. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Probing the Effects of NO x and SO x Impurities on Oxy-Fuel Combustion in Supercritical CO 2 : Shock Tube Experiments and Chemical Kinetic Modeling

The direct-fired supercritical carbon dioxide cycles are one of the most promising power generation methods in terms of their efficiency and environmental friendliness. Two important challenges in implementing these cycles are the high pressure (300 bar) and high CO 2 dilution (>80%) in the combustor. The design and development of supercritical oxy-combustors for natural gas require accurate reaction kinetic models to predict the combustion outcomes. The presence of a small amount of impurities in natural gas and other feed streams to oxy-combustors makes these predictions even more complex. During oxy-combustion, trace amounts of nitrogen present in the oxidizer is converted to NO x and gets into the combustion chamber along with the recirculated CO 2 . Similarly, natural gas can contain a trace amount of ammonia and sulfurous impurities that get converted to NO x and SO x and get back into the combustion chamber with recirculated CO 2 . In this work, a reaction model is developed for predicting the effect of impurities such as NO x and SO x on supercritical methane combustion. The base mechanism used in this work is GRI Mech 3.0. H 2 S combustion chemistry is obtained from Bongartz et al. while NOx chemistry is from Konnov. The reaction model is then optimized for a pressure range of 30–300 bar using high-pressure shock tube data from the literature. It is then validated with data obtained from the literature for methane combustion, H 2 S oxidation, and NO x effects on ignition delay. The effect of impurities on CH 4 combustion up to 16 atm is validated using NO x -doped methane studies obtained from the literature. In order to validate the model for high-pressure conditions, experiments are conducted at the UCF shock tube facility using natural gas identical mixtures with N 2 O as an impurity at ~100 bar. Current results show that there is a significant change in ignition delay with the presence of impurities. A comparison is made with experimental data using the developed model and predictions are found to be in good agreement. The model developed was used to study the effect of impurities on CO formation from sCO 2 combustors. It was found that NO x helps in reducing CO formation while the presence of H 2 S results in the formation of more CO. The reaction mechanism developed herein can also be used as a base mechanism to develop reduced mechanisms for use in CFD simulations.

Energy & Fuels↗
DOE OSTI2022

Numerical Study of PAHs and Soot Emissions from Gasoline–Methanol, Gasoline–Ethanol, and Gasoline– n -Butanol Blend Surrogates

Soot formation is an intricate phenomenon, and soot propensity of a fuel is interwoven with the fuel composition, physical and chemical properties, and combustion environment. Here, the present study examines the hypothesis that in addition to the chemical composition of the fuel, the sooting nature of the fuel is closely coupled with its chemical property known as octane sensitivity (S). With this motivation, the present study numerically investigates the effects of gasoline surrogate composition and its property, octane sensitivity (S), on polycyclic aromatic hydrocarbons (PAHs) and soot emissions. Four-component toluene primary reference fuel (TPRF)–alcohol blends, comprising iso-octane, n-heptane, toluene, and one of the three different alcohols- methanol, ethanol, and n-butanol, are used as gasoline surrogates. A total of 320 TPRF–alcohol mixtures, with S in the range of 1–10, are examined under laminar counterflow diffusion flame conditions. A detailed chemical mechanism coupled with a comprehensive soot model, which includes reactions for soot inception, surface growth, PAH condensation, and oxidation, is adopted. The analysis indicates that the toluene content in the fuel mixture has a prominent effect, while the alcohol content and octane sensitivity of the fuel have a weak correlation with the PAHs and soot. Thus, it is not clear if any of these three variables, namely, toluene content in the fuel, alcohol content in the fuel, and S, are individually sufficient to characterize the PAHs and soot across various blends. For this reason, a new variable (X CHO ) based on the elemental composition of the fuel mixture is identified and it is shown that X CHO along with S of the fuel characterize soot emissions satisfactorily. Further, a reaction path analysis indicates that the efficacy of alcohols in reducing soot emissions follows the order: methanol > ethanol > n-butanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Challenges in Kinetic modeling of ammonia pyrolysis

Ammonia pyrolysis reactions have implications for its ignition and oxidation in engines and gas turbines. In the present work, the chemistry of ammonia pyrolysis is investigated by kinetic modeling and theory. Rate constants for key reactions are carefully evaluated based on available experimental and theoretical results. The high pressure limit k1,∞ for NH 2 + H (+M) ⇄ NH 3 (+M) (R1) is calculated to be essentially the collision frequency, indicating that dissociation of ammonia in combustion processes will be at or close to the low pressure limit even at engine and gas turbine conditions. The chemical kinetic model is validated against reported shock tube measurements of NH 3 , NH 2 , and NH in ammonia pyrolysis. Predictions are in good agreement with observations for dilute conditions (≤ 0.5% NH 3 ), but the model appears to underpredict the NH 3 consumption rate at longer times in less dilute mixtures. At short reaction times, thermal dissociation of NH3, together with the NH 3 + H reaction, controls conversion. At longer times, secondary reactions involving NH 2 and NH become important due to their impact on the radical pool. Predictions become sensitive to formation and consumption of diazene (tHNNH and cHNNH). Several of the key steps in the ammonia pyrolysis mechanism are radical-radical reactions that are difficult to measure accurately and challenging to calculate theoretically, and a more comprehensive experimental characterization is desirable to support further model development.

10 SYNTHETIC FUELS↗
DOE OSTI2020

Nuclear Criticality Safety Assessment of Criticality Control Containers without Moderation Control at the Waste Isolation Pilot Plant

The Waste Isolation Pilot Plant (WIPP) provides for safe, permanent disposal of government-owned transuranic (TRU) and TRU mixed wastes. Receipt and disposal of waste at the WIPP site began in March 1999. The Sandia report, Consideration of Nuclear Criticality When Disposing of Transuranic Waste at the Waste Isolation Pilot Plant, addressed potential nuclear criticality safety issues based on the projected inventory characteristics known at the time [1]. As designs for inventory, waste forms, and disposal packages have changed, new analyses have been performed, and updates have been made to address any potential effects to the WIPP safety basis. New analyses performed include Saylor 2017 [2] and Brickner 2019 [3], which address certain waste containers with specified loadings under post-closure conditions. Both examined several hypothetical scenarios and included analyses to bound (from a criticality potential standpoint) credible configurations that could occur at WIPP during the repository regulatory post-closure disposal time period for feature, event, and process (FEP) considerations—10,000 years. During this post-closure period at WIPP, the screening of FEPs is governed by the risk-based standards and implementing regulations of the US Environmental Protection Agency (EPA) (i.e., 40 CFR 191 and 40 CFR 194, respectively) [4,5]. An FEP screening can be based on either a low-consequence or low-probability rationale. A low-probability rationale includes either (a) a qualitative rationale that the FEP is not credible or (b) a quantitative demonstration that the probability is less than 10-4 in 104 years. In this evaluation, a qualitative lowprobability rationale of not credible is used by demonstrating that bounding configurations of the waste are not critical. The demonstration of subcriticality is through quantitative calculations, but a probability of criticality is not evaluated. Rather, the rationale for this evaluation is that bounding configurations with an effective neutron multiplication factor (keff) well below the upper subcriticality limit (USL) make criticality incredible. Reference [2] documented a nuclear criticality assessment of the WIPP repository for disposal of dilute surplus plutonium materials using the Dilute and Dispose Approach and packaging in criticality control overpacks (CCOs). The CCO is the waste disposal container recently designed to allow for up to 380 fissile gram equivalent (FGE) 239 Pu per drum, which is a higher fissile loading than typical waste containers. The CCO consists of a criticality control container (CCC) positioned by upper and lower plywood spacers within a standard 55 gal drum. The CCC is used to establish a geometry control for fissile materials during transportation and WIPP emplacement operations. The current WIPP waste acceptance criteria for CCO payloads limit beryllium to less than or equal to 1% by weight of the waste contents and require the waste form to be non-machine compacted. Reference [2] considered two scenario progressions—room closure from salt creep, hereafter referred to as the reconfigured dry scenario, and flooding with brine, hereafter referred to as the reconfigured wet scenario. The subsequent drying out of the reconfigured wet scenarios was also considered. For all scenarios, subcriticality was maintained when 50 g of B 4 C (acting as a neutron absorber) per CCC was intermixed within the plutonium disposition waste form. The analysis used a waste form description that limits the amount of moderation that could be present within the waste form (i.e., it limits the amount of water and polyethylene that could be present based on planned processing conditions). This analysis to evaluate increased limits on the amount of moderation that could be present was performed as a companion to Reference [2] to address concerns associated with verifying moisture and/or plastic contents of waste materials following packaging of dilute surplus plutonium in the CCO. To that end, this analysis used the models and methods from Reference [2] to evaluate a more generic base waste form consisting of water and polyethylene that is more similar (and nearly identical) to the generic waste forms utilized in other models/analyses supporting the TRU Package Transporter Model II (TRUPACTII) safety analysis [6] (all are without moderation controls). The waste form in this analysis uses a base mixture of 75% water and 25% polyethylene, the total amount of which is varied to determine the optimum moderation to fissile material (H/Pu) ratio. The fissile loading is maintained at up to 380 FGE 239 Pu (modeled as PuO 2 ) per CCO with an additional 545 g of beryllium (to bound the 1% by weight contents restriction) and 50 g of B 4 C intermixed per CCO. The beryllium content (1% by weight) is based on the total allowed waste weight (this does not include packaging and container weights). Figures ES-1 and ES-2 display summary results, showing that with this model including 50 g of B 4 C per CCO, the system keff remains under 0.85 for all moderator amounts and provides a significant margin against post-closure criticality under postulated bounding conditions for compaction. Figure ES-1 compares an infinite model with a room model at the initial emplacement spacing and under full radial compaction. Full radial compaction places each CCC in direct contact and does not credit any anticipated spacing associated with current post-closure geomechanical modeling of the repository [7]. The effects of variations in the H/Pu ratio were evaluated by varying the amount of the water/polyethylene component of the waste model, with fissile loading maintained at 380 239 Pu FGE. Similarly, Figure ES-2 illustrates how various amounts of B 4 C per CCO influence k eff at different radial compactions, all at the H/Pu ratio of 200 (in the room array model). Therefore, while the results from Saylor 2017 [2] modeled more realistic process limits associated with packaging of dilute surplus plutonium, this analysis demonstrates that limits on moderation (plastic and water content) are not necessary to ensure subcriticality in the WIPP repository, provided the requisite B 4 C absorber is present.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

ATOMIC Simulations and Experimental Data for Sodium and Copper Mixtures

This data consists of simulations and experimental measurements of laser-induced breakdown spectroscopy (LIBS). The simulations are produced by ATOMIC, a general purpose plasma modeling and kinetics code that has been designed to compute emission (or absorption) spectra from plasmas [1]. Our overall suite of simulations contains 12 sets of simulations: training and validation sets of simulations for each of two resolutions of each of sodium, copper, and mixtures of the two. The training data were produced using a 500-run design that varies input parameters temperature (T), electron density (Ne), proportion of sodium (pNa), and proportion of copper (pCu). The latter two variables sum to one and are unused in the single-element simulations. The validation data was produced with a 25-run design. The coarse simulations produce spectra over a range of 240nm - 880nm that roughly mimics the range collected by the ChemCam instrument on the Mars rover Curiosity. The fine resolution simulations produce spectra over a range of 550nm to 600nm and were produced to mimic the included experimental results. The experimental results cover four mixtures of sodium and copper. All data sets are kept in zip files whose names indicate the elemental composition (NaCu, Na, or Cu), resolution (coarse or fine), and purpose (training or validation) with file names numbered to indicate the line in the design files used to produce the simulation. The designs are provided as text files with names indicating their purpose. The experimental data is provided as a CSV file. See attached abstract for figures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Analysis of heat transfer and AuNPs-mediated photo-thermal inactivation of E. coli at varying laser powers using single-phase CFD modeling

In the wake of the COVID-19 pandemics, the demand for innovative and effective methods of bacterial inactivation has become a critical area of research, providing the impetus for this study. The purpose of this research is to analyze the AuNPs-mediated photothermal inactivation of E. coli. Gold nanoparticles irradiated by laser represent a promising technique for combating bacterial infection that combines high-tech and scientific progress. The intermediate aim of the work was to present the calibration of the model with respect to the gold nanorods experiment. The purpose of this work is to study the effect of initial concentration of E. coli bacteria, the design of the chamber and the laser power on heat transfer and inactivation of E. coli bacteria. Using the CFD simulation, the work combines three main concepts. 1. The conversion of laser light to heat has been described by a combination of three distinctive approximations: a- Discrete particle integration to take into account every nanoparticle within the system, b- Rayleigh-Drude approximation to determine the scattering and extinction coefficients and c- Lambert–Beer–Bourger law to describe the decrease in laser intensity across the AuNPs. 2. The contribution of the presence of E. coli bacteria to the thermal and fluid-dynamic fields in the microdevice was modeled by single-phase approach by determining the effective thermophysical properties of the water-bacteria mixture. 3. An approach based on a temperature threshold attained at which bacteria will be inactivated, has been used to predict bacterial response to temperature increases. The comparison of the thermal fields and temporal temperature changes obtained by the CFD simulation with those obtained experimentally confirms the accuracy of the light-heat conversion model derived from the aforementioned approximations. The results show a linear relationship between maximum temperature and variation in laser power over the range studied, which is in line with previous experimental results. It was also found that the temperature inside the microchamber can exceed 55 °C only when a laser power higher than 0.8 W is used, so bacterial inactivation begins. The experimental data allows to determinate the concentration of nanoparticles. This parameter is introduced into the mathematical model obtaining the same number of AuNPs. However, this assumption introduces a certain simplification, as in the mathematical model the distribution of nanoparticles is uniform. This work is directly connected to the use of gold nanoparticles for energy conversion, as well as the field of bacterial inactivation in microfluidic systems such as lab-on-a-chip. Presented mathematical and numerical models can be extended to the entire spectrum of wavelengths with particular use of white light in the inactivation of bacteria. This work represents a significant advancement in the field, as to the best of the authors’ knowledge, it is the first to employ a single-phase computational fluid dynamics (CFD) approach specifically combined with the thermal inactivation of bacteria. Moreover, this research pioneers the use of a numerical simulation to analyze the temperature threshold of photothermal inactivation of E. coli mediated by gold nanorods (AuNRs). The integration of these methodologies offers a new perspective on optimizing bacterial inactivation techniques, making this study a valuable contribution to both computational modeling and biomedical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cylindricity Sensitivity Thermal Model of the AGR-5/6/7 Experiment in the Advanced Test Reactor

The AGR-5/6/7 experiment is currently being irradiated in the Advanced Test Reactor (ATR) at the Idaho National Laboratory and is approximately 70% complete. Several fuel and material irradiation experiments have been planned for the U.S. Department of Energy Advanced Gas Reactor Fuel Development and Qualification Program, which supports the development and qualification of tristructural isotropic (TRISO) coated particle fuel for use in high-temperature gas-cooled reactors. The goals of these experiments are to provide irradiation performance data to support fuel process development, qualify fuel for normal operating conditions, support development of fuel performance models and codes, and provide irradiated fuel and materials for post-irradiation examination and safety testing. Originally planned and named as separate fuel experiments, but subsequently combined into a single test train, AGR-5/6/7 is testing low-enriched uranium oxycarbide TRISO fuel. The AGR-5/6/7 test train has 5 capsules with thermocouples and independent gas control mixtures. Unique to this paper is a sensitivity study concerning the cylindricity of the graphite holders containing the fuel compacts and their eccentricity in relation to the stainless-steel capsule walls. Each capsule has small nubs on the outside used for centering the graphite holder inside the stainless-steel capsule with a small gas gap used to control temperature. Due to machining tolerances of these nubs and vibration wearing the nubs down when the experiment is running in the reactor, the possibility exists that the holder may move around radially. Each capsule is equipped with several thermocouples placed at various radii and depths within each graphite holder. This paper will show the sensitivity of offsetting the graphite holder for various radii in 45-degree increments around the circle with the objective of minimizing the difference between the measured thermocouples and the modeled thermocouple temperatures. Separate gas mixtures of helium/neon are introduced into this gas gap between the holder and capsule wall and changed as necessary to maintain the desired thermocouple temperatures to keep the fuel compacts at constant temperature as the nuclear reactor conditions change. The goal of the sensitivity study is to find a radius and an angle to offset the holder from perfectly centered for each of the five capsules separately. The complex thermal model includes fission heating, gamma heating, radiation heat transfer, and heat transfer via conduction and radiation across the control gaps. Subroutines linked to the thermal model offer an easy method to offset the graphite holder from the capsule walls without remeshing the entire model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗