Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mineralogy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Millimeter petrology and kilometer mineralogical exploration of the moon

Coordinated petrologic and spectroscopic analyses were undertaken for a specially prepared 1-cm chip of regolith breccia 60019. The mafic minerals of each large clast were readily identified from spectral reflectance measurements of the same clasts, and mineral abundance was shown to be directly related to absorption strength. Although most clasts of 60019 are noritic in composition, the presence of abundant olivine and/or high-Ca pyroxene in several clasts is easily noted spectroscopically. The origin of an unusual absorption feature near 0.6 micron in an anorthositic clast was determined by petrographic analysis to be due to very fine-grained translucent ilmenite. The 60019 matrix is dark and glassy, and although a variety of clasts occur on all scales, particulate powders of 60019 are all very similar and have spectral properties that indicate a noritic breccia bulk composition.

Pieters, C. M.↗

Ultrafine-grained mineralogy and matrix chemistry of olivine-rich chondritic interplanetary dust particles

Olivine-rich chondritic interplanetary dust particles (IDPs) are an important subset of fluffy chondritic IDPs collected in the earth's stratosphere. Particles in this subset are characterized by a matrix of nonporous, ultrafine-grained granular units. Euhedral single crystals, crystals fragments, and platey single crystals occur dispersed in the matrix. Analytical electron microscopy of granular units reveals predominant magnesium-rich olivines and FeNi-sulfides embedded in amorphous carbonaceous matrix material. The variable ratio of ultrafine-grained minerals vs. carbonaceous matrix material in granular units support variable C/Si ratios, and some fraction of sulfur is associated with carbonaceous matrix material. The high Mg/(Mg+Fe) ratios in granular units is similar to this distribution in P/Comet Halley dust. The chondritic composition of fine-grained, polycrystalline IDPs gradually breaks down into nonchondritic, and ultimately, single mineral compositions as a function of decreased particle mass. The relationship between particle mass and composition in the matrix of olivine-rich chondritic IDPs is comparable with the relationship inferred for P/Comet Halley dust.

Rietmeijer, F. J. M.↗

Methods for the mineralogical and textural analysis of comet nucleus samples

The objectives and instrumental requirements of a petrographic analysis of porous comet nucleus material are reviewed. Assumptions about its composition and texture, and the available techniques for the microscopic analysis of comet analogue material are investigated. New techniques required for the petrographic investigation of natural and artificial comet nucleus samples are also considered.

Stoeffler, D.↗

Reflectance spectra of 'featureless' materials and the surface mineralogies of M- and E-class asteroids

In a search for diagnostic spectral parameters which can be used to distinguish different materials on the surface of asteroids and to provide information on the detection limits for mafic silicates, the 0.3- to 2.6-micron reflectance spectra of meteoritic enstatite (nearly pure MgSiO3), iron meteorite metal, magnetite, and amorphous carbon as well as various mixtures of these materials with mafic silicates were examined. Results are presented on the dependence of the spectral detectability of mafic silicates associated with metal, carbon, and magnetite on the particle sizes of the phases, their chemistries, crystal structures, and abundances. It is shown that the observational data for a representative M-class asteroid, (16) Psyche, are largely consistent with a fine-grained metal-rich surface assemblage, whereas data for the E-class asteroid (44) Nysa indicate that its surface is composed of fine-grained material similar to enstatite achondrites, with a small amount of material comparable to the chondritic inclusions found in the Cumberland Falls aubrite.

Cloutis, Edward A.↗

New mineralogical and chemical data on the Machinga (L6) chondrite, Malawi

The Machinga, southern Malawi, Africa, L6 chondrite (observed fall, January 22, 1981) contains accessory phases of metal, troilite, chromite, and native Cu (which is associated with limonite and found in zones of aqueous alteration). Rare accessory phases are apatite and pentlandite, which are uncommon in L6 chondrites. Major mineral constituents (olivine, orthopyroxene, and plagioclase) indicate shock effects at a level of about 15-20 GPa shock pressure. The meteorite is thus classified to be of L6d type. Melt pockets of widely variable composition are abundant.

Koeberl, Christian↗

Petrology and mineralogy of Type II, FeO-rich chondrules in Semarkona (LL3.0) - Origin by closed-system fractional crystallization, with evidence for supercooling

The petrology of type II porphyritic olivine chondrules in Semarkona (LL3.0) has been studied in detail. Olivines in these chondrules are euhedral, Fe-rich, and are strongly zoned from cores to rims of grains in FeO (Fa10-30), Cr2O3 (0.2-0.6 wt pct), MnO (0.2-0.7 wt pct), and CaO (0.1-0.4 wt pct). Interstitial mesostasis is rich in Si, Al, and Ca and is glassy with abundant microcrystallites. Minor minerals include troilite, Fe,Ni metal, and chromite. Some olivine grains contain euhedral, fayalite-rich cores that are probably produced during initial supercooling of the chondrule melt. Rare relict grains of forsteritic olivine have compositions very similar to olivines in type IA chondrules in Semarkona and may result from disaggregation of such chondrules. Apart from these relics, all properties of type II chondrules can be described by closed-system fractional crystallization of droplets which were essentially entirely molten. Type IA chondrules may have formed from type II chondrules by loss of Fe and volatiles. Alternatively, the two chondrule types may have formed in regions of considerable diversity in the solar nebula from precursor materials with different Fe/Mg ratios.

Jones, Rhian H.↗

Iron-sulfur mineralogy of Mars - Magmatic evolution and chemical weathering products

Models are developed for the magmatic evolution and the oxidative weathering of sulfide minerals on Mars, based on petrogenetic associations among komatiitic rock types, Viking geochemical data, SNC meteorites, and terrestrial Fi-Ni deposits. The weathering model was tested by exposing komatiitic pyrrhotites and olivines to sulfuric acid solutions, with or without dissolved ferric iron, and identifying the reaction products by Moessbauer spectroscopy. The results suggest that, on Mars, acidic groundwater has induced oxidative weathering of pyrrhotite, yielding FeS2 and then FeOOH.

Burns, Roger G.↗

Infrared spectra and crystal chemistry of scapolites - Implications for Martian mineralogy

Near-IR and mid-IR spectra of 27 scapolites with a wide range of compositions were compared to the features of the 2.35-micron band absorption system that was recently discovered in reflectance spectra of Mars. Results suggest that the 2.36-micron features are due to the presence of small amounts (about 0.5 wt pct each) of HCO3(-) and HSO4(-) in the anion sites of a scapolite. Five of the scapolites (including two meionite and three mizzonite samples) showed absorption features unique to HCO3(-) and HSO4(-). It was determined that the features of the 2.36-micron-centered system are produced by a disordered anion site occupancy and that the band intensity also depends on the HCO3(-)/HSO4(-) ratio. It was found (Clark et al., 1990) that HCO3(-) and HSO4(-) bearing minerals other than scapolites do not exhibit spectral features of the scapolite.

Swayze, Gregg A.↗

Mineralogical and chemical properties of the lunar regolith

The composition of lunar regolith and its attendant properties are discussed. Tables are provided listing lunar minerals, the abundance of plagioclase feldspar, pyroxene, olivine, and ilmenite in lunar materials, typical compositions of common lunar minerals, and cumulative grain-size distribution for a large number of lunar soils. Also provided are charts on the chemistry of breccias, the chemistry of lunar glass, and the comparative chemistry of surface soils for the Apollo sites. Lunar agglutinates, constructional particles made of lithic, mineral, and glass fragments welded together by a glassy matrix containing extremely fine-grained metallic iron and formed by micrometeoric impacts at the lunar surface, are discussed. Crystalline, igneous rock fragments, breccias, and lunar glass are examined. Volatiles implanted in lunar materials and regolith maturity are also addressed.

Mckay, David S.↗

Towards a circumstellar silicate mineralogy

This paper reviews the formation, composition, and spectroscopy of circumstellar silicate grains. It is argued that 'clean' silicates (and oxides) are formed close to the stellar photosphere, but because of their low NIR absorptivity, these grains float with the gas in the pulsating photosphere until, at large distances from the stellar surface, enough Fe(2+) is incorporated (i.e., 'dirty' silicates) for radiation pressure to drive a dusty outflow. The silicate chemical condensation sequence is reviewed with emphasis on kinetics rather than thermodynamics, and likely condensates are identified. IRAS LRS spectra of tenuous dust shells show considerable variations in the shape of the 10-micron feature and at least 5 independent spectral components are indicated. These are compared with laboratory spectra and (preliminary) identifications are proposed.

Tielens, A. G. G. M.↗

Clays on Mars: Review of chemical and mineralogical evidence

Mafic igneous bedrock is inferred for Mars, based on spectrophotometric evidence for pyroxene (principally in optically dark areas of the globe) and the pyroxenite-peridotite petrology of shergottite nakhlite chassignite (SNC) meteorites. Visible and infrared spectra of reddish-brown surface fines (which dominate Martian bright areas) indicate ferric iron and compare favorably (though not uniquely) with spectra of palagonitic soils. Laboratory studies of SNC's and Viking Lander results support a model for Martian soil based on chemical weathering of mafic rocks to produce layer structured silicates (clay minerals), salts, and iron oxides.

Banin, Amos↗

Mineralogy of the Martian surface from Mariner 6/7 infrared spectrometer data

The Mariner 6/7 Infrared Spectrometer (IRS) experiment data from the 1969 Mars flyby encounters represent a valuable source of information about the IR reflection/emission spectrum of Mars in the 1.9 and 14.4 micron region. During 1990, the wavelength calibration of the IRS data was completely redone, using information from inflight spectra of Mars taken through a polystyrene film and from the locations of Martian CO2 bands. The response functions of the two instruments were then rederived using laboratory black body spectra. Also, a particular approach was taken to study the IRS data in which the effects of uncertain wavelength and intensity calibration can be minimized. This involves doing ratios of spectra. These are of particular value when applied to study contrasts between various albedo domains on the Mars surface and between spectra with differing emission angle. The latter provide a means of assessing the contribution of the atmosphere and airborne dust to the spectra. Given here are graphs showing two near infrared radiance spectra for very different albedo regions and a ratio of two spectra obtained at very different total solar pathlength (airmass).

Martin, T. Z.↗

Iddingsite in the Nakhla meteorite: TEM study of mineralogy and texture of pre-terrestrial (Martian?) alterations

Rusty-colored veinlets and patches in the Nakhla meteorite, identified as iddingsite, are pre-terrestrial. The rusty material is iddingsite (smectites + hematite + ferrihydrite); like terrestrial iddingsites, it probably formed during low-temperature interaction of olivine and water. Fragments of rusty material with host olivine were removed from thin sections of Nakhla with a tungsten needle. Fragments were embedded in epoxy, microtomed to 100 nanometers thickness, and mounted on Cu grids. Phase identifications were by Analytical Electron Microscopy/Energy Dispersive X-ray Analysis (EM/EDX) standardless chemical analyses (for silicates), electron diffraction (hematite and ferrihydrite), and lattice fringe imaging. This iddingsite in Nakhla is nearly identical to some formed on Earth, suggesting similar conditions of formation on the Shergottites-Nakhlites-Chassigny (SNC) meteorite parent planet. A more detailed account of the results is presented.

Treiman, Allan H.↗

Charge-coupled device imaging spectroscopy of Mars. II - Results and implications for Martian ferric mineralogy

Materials similar to nanophase ferric oxides are presently seen to dominate the spectral behavior of the Martian surface in the visible-to-near-IR, in view of imaging spectroscopic observations of Mars. Attention is accordingly given to models for the formation of hematite and other ferric minerals in both current terrestrial environments and in the current and past, possibly wetter Martian climate. It is noted that imaging spectroscopy is an ideal tool for high spatial resolution spacecraft and telescopic studies of the Martian surface.

Bell, James F., III↗

Lunar ferroan anorthosites - Mineralogy, compositional variations, and petrogenesis

Results of a study of 16 samples from the anorthositic ferroan subgroup, or 'typical' ferroan anorthosites, are reported. The presence of heterogeneous, bimodal, and/or trimodal pyroxene compositions suggests that some of the anorthosites are polymict rocks; however, they are composed entirely of ferroan-anorthosite-suite lithologies. It is suggested that complex processes operated during the formation of the ferroan anorthosites. It is argued that original igneous compositional characteristics were altered during and/or after crystallization. Processes operative during anorthosite formation may have included some mixing of different melts, trapping of variable amounts of intercumulus liquid, postcrystallization redistribution of elements, or perturbations both during adcumulus growth and subsequent to crystallization by impact events.

Mcgee, J. J.↗

An evaluation of short-wave-infrared (SWIR) data from the AVIRIS and GEOSCAN instruments for mineralogical mapping at Cuprite, Nevada

An evaluation was performed on SWIR (2000-2400 nm) data from two airborne remote sensing systems for discriminating and identifying alteration minerals at Cuprite, Nevada. The data were acquired by the NASA Airborne Visible/InfraRed Imaging Spectrometer (AVIRIS) and the GEOSCAN Mk II multispectral scanner. The evaluation involved comparison of processed imagery and image-derived spectra with existing alteration maps and laboratory spectra of rock samples from Cuprite. Results indicate that both the AVIRIS and GEOSCAN data permit the discrimination of areas of alunite, buddingtonite, kaolinite, and silicification using color composite images formed from three SWIR bands processed with either the decorrelation stretch or a log residual algorithm. The laboratory spectral features alunite, kaolinite and buddingtonite could be seen clearly only in the log residual processed AVIRIS data. However, this does not preclude their identification with the GEOSCAN data.

Hook, Simon J.↗

Lunar meteorite Yamato-86032 - Mineralogical, petrological, and geochemical studies

Yamato-86032 is a shock-lithified anorthositic fragmental breccia. It consists mainly of highly feldspathic meta-breccias and meta-meltrocks and possibly contains a small contribution from mare lithologies, but there is no indication of a KREEP component. In many respects Y-86032 is similar to the previously described lunar meteorites Y-82192/3, but there are some notable differences. We have analyzed about 40 major and trace elements in bulk matrix, impact melt, and clast samples from two chips of Y-86032. The abundances of most lithophile and incompatible elements are lower in Y-86032 than in Y-82192 (which contains very low abundances compared to normal lunar highland rocks). The REE abundances are comparable to those of Y-82192. The elements Sc, Cr, Mn, Fe and Co have significantly lower abundances than in Y-82192, and the siderophile element pattern is also different. Since cosmic ray exposure data indicate pairing of Y-86032 with Y-82192/3, the source region for these meteorites on the moon must have been fairly heterogeneous.

Koeberl, Christian↗

Mineralogy of chondritic interplanetary dust particle impact residues from LDEF

A detailed structural and compositional analysis of several impactor residues was performed utilizing transmission electron microscopy, energy dispersive spectroscopy, and electron diffraction. Residues from the interior of several craters in gold surfaces were removed with a tungsten needle, mounted in EMBED-812 epoxy, and ultramicrotomed. The presence in these residues of equilibrated ferromagnesian minerals, recrystallization textures, glass, and melted metal and sulfide bodies decorating grain boundaries is indicative of varying degrees of shock metamorphism in all impact residues we have characterized.

Barrett, R. A.↗