Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MgO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Experimental determination of the spinel-garnet boundary in a Martian mantle composition

The high pressure reaction orthopyroxene + clinopyroxene + spinel to garnet + olivine is applicable to the mantle of Mars. Experimental reversals of this reaction in the system CaO-MgO-FeO-Al2O3-SiO2 have been made in the range 1000-1200 C using the bulk composition proposed by Morgan and Anders (1980). At 1000 C, 1100 C, and 1200 C the garnet-out equilibrium is bracketed at 10.8 + or - 0.5, 12.6 + or - 0.5, and 15.2 + or - 0.5 kbars, respectively. A dP/dT slope of 14.0 bar/K at 1000 C increasing to 26.0 bar/K at 1200 C has been inferred. Depending on bulk composition, the mantle of Mars is inferred to have a phase assemblage of either olivine + clinopyroxene + orthopyroxene + garnet or olivine + clinopyroxene + garnet + spinel. In the second, the partial melts will not be buffered by olivine and orthopyroxene and will have markedly lower silica activities than those of the terrestrial mantle.

Patera, E. S.↗
NASA NTRS1982

Creep of plasma-sprayed-ZrO2 thermal-barrier coatings

Specimens of plasma-sprayed-zirconia thermal-barrier coatings with three different porosities and different initial particle sizes were deformed in compression at initial loads of 6900, 13,800, and 24,100 kPa (1000, 2000, and 3500 psi) and temperatures of 1100, 1250, and 1400 C. The coatings were stabilized with lime, MgO, and two different concentrations of Y2O3. Creep began as soon as the load was applied and continued at a constantly decreasing rate until the load was removed. Temperature and stabilization had a pronounced effect on creep rate while the stress, particle size, and porosity had a lesser effect. Creep deformation was due to cracking and particle sliding.

Firestone, R. F.↗
NASA NTRS1983

Improved performance thermal barrier coatings

Thermal barrier coatings offer an attractive approach to improving the durability and efficiency of the hot section of heat engines. The coatings typically consist of an inner alloy bond coating about 0.01 cm thick resistant to oxidation and hot corrosion and an outer ceramic layer, usually a stabilized zirconia, 0.01-0.05 cm thick. Here, the materials, thermomechanical stress, and hot corrosion problems associated with thermal barrier coatings are reviewed along with the capabilities and limitations of current technology. The coatings discussed include ZrO2-Y2O3/NiCrAlY, ZrO2-Y2O3/NiCoCrAlY, ZrO2-MgO/NiCoCrAlY, CaO-SiO2/Co-Cr-Al-Y, and CaO-SiO2/NiCrAlY systems. It is emphasized that the performance of thermal barrier coatings is governed by many complex and interrelated factors, so that optimization of these coatings always involves certain tradeoffs.

Levine, S. R.↗
NASA NTRS1983

Sintering of reaction bonded silicon nitride

A process to produce sintered reaction-bonded Si3N4 (SRBSN) articles has been developed. This process consists of the addition of an appropriate sintering aid to reaction-bonded Si3N4 followed by sintering between 1780 and 2000 C, using an over pressure of nitrogen. The principal advantage of this process is the low sintering shrinkages of 5 to 10 percent. The properties and microstructure of two SRBSN systems sintered with MgO and Y2O3 additives are described and were found to be comparable to corresponding hot-pressed Si3N4 systems. Examples of applications of both systems are illustrated, demonstrating near net shape fabrication capability of the process.

Mangels, J. A.↗
NASA NTRS1983

An ancient depleted mantle source for Archean crust in Rajasthan, India

Data from an initial set of Banded Gneiss Complex (BGC) east of the city of Udaipur are given. In this region the BGC comprises typical grey gneiss with variably abundant granitic and mafic components. Efforts to date were concentrated on the mafic components which, based on chemical data, appear to be metavolcanic. All samples examined were recrystallized under amphibolite or upper amphibolite facies conditions. Pertinent chemical data for a small number of amphibolites analyzed so far are: SiO2: 49-53%; MgO: 5.7-7.3%; K2O: 0.24-0.50%; Ni: 106-140 ppm; Zr: 37-159 ppm. From Sm/Nd data, all amphibolites show small to moderate LREE enrichments.

Macdougall, J. D.↗
NASA NTRS1983

On a vibronic origin for the diffuse band spectrum

Duley (1982) has proposed that many of the diffuse interstellar bands in the wavelength interval 542-677 nm arise from vibronic transitions of Cr (3+) ions in MgO grains. No explanation has been offered for the fact that as many as 85 of the possible 108 transitions of this system have not been observed in the interstellar medium. Moreover, the relative intensities of the diffuse bands which are observed appear to be inconsistent with their assignment. It is therefore concluded that this model is not consistent with the observations.

Nuth, J. A.↗
NASA NTRS1983

Mechanical and physical properties of plasma-sprayed stabilized zirconia

Physical and mechanical properties were determined for plasma-sprayed MgO- or Y2O3-stabilized ZrO2 thermal barrier coatings. Properties were determined for the ceramic coating in both the freestanding condition and as-bonded to a metal substrate. The properties of the NiCrAlY bond coating were also investigated.

Siemers, P. A.↗
NASA NTRS1984

Ceramic powder for sintering materials

Surface activity of ceramic powders such as MgO and Al2O3, for use in sintering with sp. emphasis on their particle size, shape, particle size distribution, packing, and coexisting additives and impurities are reviewed.

Akiya, H.↗
NASA NTRS1984

The Colony meteorite and the possible existence of a new chemical subgroup of CO3 chondrites

The Colony meteorite, found in Oklahoma around 1975, has an unrecrystallized texture and contains heterogeneous olivine and low Ca pyroxene, kamacite with low Ni and Co and high Cr, amoeboid inclusions with low FeO and MnO, and numerous small chondrules with clear pink glass. These characteristics are shared by members of the least metamorphosed subgroup of CO3 chondrites. Colony contains a fine grained matrix that has higher FeO and K2O and lower MgO and Na2O than normal CO3 matrices. Allan Hills A77307 is another unmetamorphosed meteorite that has many petrologic similarities to normal CO chondrites, including matrix abundance, mineral compositions and chondrule size. However, it differs from them in its abundance of magnetite and presence of iron carbides. The olivine and low Ca pyroxene compositional distributions of Colony and A77307 are very similar. The shapes of the thermoluminescence glow curves of Colony and A77307 are very similar, but differ significantly from those of normal CO chondrites. It is suggested that Colony and A77307 represent a distinct chemical subgroup of CO3 chondrites, characterized by low Ni, Co, S, Ca, Mg, Mn and, possibly, high Cd.

Rubin, A. E.↗
NASA NTRS1985

A search for diffuse interstellar bands in the ultraviolet

The International Ultraviolet Explorer (IUE) Satellite was used to collect interstellar extinction curves for 58 moderately reddened lines of sight. Spectral types of the background stars ranged from O7 to A0. All luminosity classes are represented, but early B main-sequence stars predominate. E(B-V) reddening values ranged from 0.14 to 1.13 mag, with an average of 0.63 mag. These extinction curves, less some 10 curves judged of lower quality, were co-added in order to reduce the random and fixed-pattern noise of the instrument. The resulting averaged curve was examined for evidence of small-scale structure, with negative results. The 2-sigma limits were found to be 0.09 mag for wavelengths between 1150 A and 2000 A, and 0.16 mag for wavelengths between 2000 A and 2300 A. Because of mismatch errors in weak stellar lines, it is unlikely that much improvement in these results is possible. The implications of these negative results are discussed with particular reference to the MgO theory of interstellar grains and diffuse bands.

Seab, C. G.↗
NASA NTRS1985

Shock induced radiation from minerals

Schmitt and Ahrens (1983) have concluded that the type of optical emission produced during shock compression was dependent upon phase changes taking place during shock compression. The present study is concerned with new observations of shock-induced optical radiation from Al2O3, MgO, NaCl, KCl, x-cut and fused SiO2, and LiF at various pressures up to 75 GPa. The experimental setup used in the study is similar to that employed by Schmitt and Ahrens. An Image Converter Camera with a three-frame plug-in unit was added to take two or three exposures of the radiation field during shock wave propagation through the sample, taking into account exposure times in the range from 50 to 500 nsec. The greybody emissions observed in LiF, which undergoes no phase transition, imply that localized heating and perhaps melting occurs in this material during shock deformation.

Schmitt, D.↗
NASA NTRS1985

Thermal history of shock-compressed solids

An isotropic, heterogeneous, viscous thermoplastic model of the uniaxially shock-compressed state in transparent solids is examined with a view to determining the conditions under which this radiation may be nominally thermal or nonthermal. Regions of locally high temperatures producing thermal radiation may develop only where the local viscosity is low and the Maxwell time is short; alternatively, regions of low elastic moduli and long Maxwell time could experience sustained elastic deformation, leading to microfracture and triboluminescence. Attention is given to the cases of MgO and SiO2.

Svendsen, B.↗
NASA NTRS1985

Ultramafic parent magmas for mare basalts?

Solidification products of basaltic magmas (fine grained basalts and ultramafic glasses) at the Apollo 15 site were examined. Consideration of simple MgO-6IO2-Al2O3 systematics plus results of calculations of fractional crystallization was reviewed. Suggestions are presented to account for the lack of correlation between the ultramafic glasses and basalts.

Longhi, J.↗
NASA NTRS1985

Thermal regimes in the detachment fault environment as deduced from fluid inclusions

Extensional tectonism, which dominates middle- and late-Tertiary geology in western Arizona, southeastern California, and southern Nevada, is characterized by normal regionally extensive, low-angle detachment faults. The decollement movement of Fupper plate rocks relative to lower plate assemblages created extensive zones of dilatency, including synthetic and antithetic listric normal faults, tear faults, tectonic crush breccias, shatter breccias, and gash veins in lithologic units above and below the detachment. The tectonically enhanced permeability above and below the detachment fault permitted mass migration of large volumes of hydrothermal solutions along the fault zone during and following upper plate movement. Major quantities of MgO, CaO, K2O, FeO/Fe2O3, SiO2 and CO2 were added to rocks in and near the detachment and related structures. Also introduced were varying amounts of trace elements including Mn, Cu, S, Mo, Ba, Au, Pb, Zn, U and/or Ag. Minerals containing fluid incusions were collected from all of these loci at locations in detachment faulted terranes in western Arizona and southeastern California.

Beane, R. E.↗
NASA NTRS1985

Petrology and chemistry of Apollo 12 regolith breccias

Petrographic, mineral chemical, and bulk chemical data are reported for the three large Apollo 12 regolith breccias of the regolith breccia suite and for eight breccias handpicked from Apollo 12 coarse fines. Two samples formed from non-KREEPy anorthositic regolith not presently found at the sampling site. Eight of the samples can be considered mixtures of local basalt and KREEP components, with minor anorthositic components. Mare:KREEP ratios indicated by chemical mixing models range from 86:7 to essentially endmember KREEP. One sample is unlike the others (FeO 23.7; MgO 21.7) and may be a new lithology or alternatively a nonrepresentative sample. Of the 11 samples studied, five appear to be of local origin, three are most likely exotic to the site, and results for three others are inconclusive. The anorthositic breccias formed from Apollo 16-like regolith and may have been transported over several hundred kilometers from the non-KREEPy highlands to the east. Alternatively, they may be of local origin, formed from the material beneath the Apollo 12 basalt flows.

Simon, S. B.↗
NASA NTRS1985

Non-equilibrium phase distribution in an Al-SiC composite

The phase distribution in an Al-SiC composite has been investigated using high resolution analytical electron microscopy. Particular attention was focused on Al-SiC interfaces, matrix boundaries and impurity phases which would impede the easy glide of dislocations. Small crystallites of MgO were distributed singly and in clusters along Al-SiC interfaces in all specimens. Interfacial segregation and precipitation involving alloy species apparently affected precipitation in the matrix, where the distribution of phases was found to be very heterogeneous. Matrix phases also included unusually large constituent particles and dispersoids, a consequence of the composite processing methods. The relationship between the observed microstructure and the composite mechanical behavior reported by others is discussed. The heterogeneous distribution of matrix phases is expected to result in a wide variaiton in local yield stress and local work-hardening rate within the composite.

Nutt, S. R.↗
NASA NTRS1986

Structure and grain coarsening during the sintering of alumina

The pore surface area (Sp) and grain-boundary area (Sgb) were measured during the sintering of undoped and doped (100 ppm MgO) alumina compacts. Since the presence of the additive affects only Sgb (raising it at a given value of the density), pinning of the boundaries by solid-solution drag is the only additive function evidenced by the results. The importance of such pinning even at densities as low as 75 percent of theoretical is linked to the existence of microstructural inhomogeneities.

Shaw, N. J.↗