Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAXED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Annealing of irradiated n+p InP buried homojunctions

At the last SPRAT conference, the Naval Research Laboratory (NRL) presented results from two experiments. One studied n+p diffused junction (DJ) InP solar cells, and the other studied n+p shallow homojunction (SHJ) InP mesa diodes grown by metalorganic chemical vapor deposition (MOCVD). The former work showed that a DJ solar cell in which the maximum power P(sub max) had been degraded by nearly 80 percent under irradiation recovered completely under short circuit illumination at 450K. The recovery was accompanied by the removal of all but one of the radiation-induced defect levels. The latter work, on the other hand, showed that the radiation-induced defects in the SHJ diodes did not anneal until the temperature reached 650K. These results suggest that an irradiated DJ solar cell, under illumination, will anneal at a temperature 200K lower than an irradiated SHJ cell. This is an unexpected result considering the similarity of the devices. The goal of the present research is to explain this different behavior. This paper investigates two points which arose from the previous studies. The first point is that the DJ cells were annealed under illumination while the SHJ diodes were annealed without bias. The second point investigated here is that the emitters of the DJ and SHJ devices were significantly different.

Walters, Robert J.↗
NASA NTRS1995

Penetration rates over 30 years in the space age

Experimental data from spacecraft providing impact penetration rates and cratering for metallic targets is reviewed. Data includes NASA Explorers 16 and 23 and the Pegasus series, the second US-UK satellite Ariel 2, Space Shuttle STS-3 (MFE), recovered surfaces on Solar Max Satellite, The Long Duration Exposure Facility (LDEF) and EuReCa TiCCE. Factors concerning exposure to the environment are considered and, especially, material properties which affect the penetration resistance. Reference to a common material, Aluminum alloy 2024-T3, is effected and the data then compared to define firstly an average impact flux over the period. The data is examined, in the context of possible satellite and space debris growth rates, to determine the constancy of the flux. This also provides strong constraints on the current space debris component. It is found that the impact data are consistent with domination by natural meteoroid sources. Growth rates are not evident within the period 1980-1990 and Eureca TiCCE fluxes in 1993, for particles penetrating foils of around 10 microns thickness, supports the constancy of the flux. At larger dimensions the 1993 Eureca TiCCE fluxes show an 8-fold increase but this is considered not inconsistent with the selective exposure to meteoroid streams of a satellite stabilized in heliocentric co-ordinates for an 11 month period.

Mcdonnell, J. A. M.↗
NASA NTRS1995

Numerical thermal analyses of heat exchangers for the stirling engine application

The Regenerator, Cooler and Heater for the NASA Space Power Research Engine (SPRE) have been analyzed in detail for laminar, incompressible and oscillatory flow conditions. Each component has been analyzed independently and in detail with the regenerator being modeled as two-parallel-plates channel with a solid wall. The ends of the channel are exposed to two reservoir maintained at different temperature thus providing an axial temperature gradient along the channel. The cooler and heater components have been modeled as circular pipes with isothermal walls. Two different types of thermal boundary conditions have been investigated for the cooler and heater, namely, symmetric and asymmetric temperature inflow. In symmetric temperature inflow the flow enters the channel with the same temperature in throughout the velocity cycle whereas, in asymmetric temperature inflow the flow enters with a different temperature in each half cycle. The study was conducted over a wide range of Maximum Reynolds number (RE(max) varying from 75 to 60000, Valensi number (Va) from 2.5 to 800, and relative amplitude of fluid displacement (A(sub r) from 0.357 to 1.34. A two dimensional Finite volume method based on the SIMPLE algorithm was used to solve the governing partial differential equations. Post processing programs were developed to effectively describe the heat transfer mechanism under oscillatory flows. The computer code was validated by comparing with existing analytical solutions for oscillating flows. The thermal field have been studied with the help of temperature contour and three dimensional plots. The instantaneous friction factor, wall heat flux and heat transfer coefficient have been examined. It has been concluded that in general, the frictional factor and heat transfer coefficient are higher under oscillatory flow conditions when the Valensi number is high. Also, the thermal efficiency decreases for lower A(r) values. Further, the usual steady state definition for the heat transfer coefficient does not seem to be valid.

Kannapareddy, Mohan Raj↗
NASA NTRS1993

Low Reynolds number kappa-epsilon and empirical transition models for oscillatory pipe flow and heat transfer

Stirling engine heat exchangers are shell-and-tube type with oscillatory flow (zero-mean velocity) for the inner fluid. This heat transfer process involves laminar-transition turbulent flow motions under oscillatory flow conditions. A low Reynolds number kappa-epsilon model, (Lam-Bremhorst form), was utilized in the present study to simulate fluid flow and heat transfer in a circular tube. An empirical transition model was used to activate the low Reynolds number k-e model at the appropriate time within the cycle for a given axial location within the tube. The computational results were compared with experimental flow and heat transfer data for: (1) velocity profiles, (2) kinetic energy of turbulence, (3) skin friction factor, (4) temperature profiles, and (5) wall heat flux. The experimental data were obtained for flow in a tube (38 mm diameter and 60 diameter long), with the maximum Reynolds number based on velocity being Re(sub max) = 11840, a dimensionless frequency (Valensi number) of Va = 80.2, at three axial locations X/D = 16, 30 and 44. The agreement between the computations and the experiment is excellent in the laminar portion of the cycle and good in the turbulent portion. Moreover, the location of transition was predicted accurately. The Low Reynolds Number kappa-epsilon model, together with an empirical transition model, is proposed herein to generate the wall heat flux values at different operating parameters than the experimental conditions. Those computational data can be used for testing the much simpler and less accurate one dimensional models utilized in 1-D Stirling Engine design codes.

Bauer, Christopher↗
NASA NTRS1994

Galactic arm models of gamma-ray burst sources

Using the BATSE observations, evidence was presented recently that at least some of the gamma-ray burst sources could be in our Galactic spiral arms. Other analyses have disagreed with this conclusion, leading to an active debate as to whether this can be true. Taking a different approach, a large range of possible spiral arm spatial distributions for the gamma-ray burst sources is investigated here, and it is shown that none of these are able to simultaneously fit the current BATSE (V/V(sub max)), (cos theta), and (sin(exp 2) b) observations if all the sources are in the spiral arms. If claims continue to be made that the burst sources are in the Galactic spiral arms, it will be necessary to produce an acceptable spatial distribution for the sources.

Smith, I. A.↗
NASA NTRS1994

Integral-moment analysis of the BATSE gamma-ray burst intensity distribution

We have applied the technique of integral-moment analysis to the intensity distribution of the first 260 gamma-ray bursts observed by the Burst and Transient Source Experiment (BATSE) on the Compton Gamma Ray Observatory. This technique provides direct measurement of properties such as the mean, variance, and skewness of the convolved luminosity-number density distribution, as well as associated uncertainties. Using this method, one obtains insight into the nature of the source distributions unavailable through computation of traditional single parameters such as V/V(sub max)). If the luminosity function of the gamma-ray bursts is strongly peaked, giving bursts only a narrow range of luminosities, these results are then direct probes of the radial distribution of sources, regardless of whether the bursts are a local phenomenon, are distributed in a galactic halo, or are at cosmological distances. Accordingly, an integral-moment analysis of the intensity distribution of the gamma-ray bursts provides for the most complete analytic description of the source distribution available from the data, and offers the most comprehensive test of the compatibility of a given hypothesized distribution with observation.

Horack, John M.↗
NASA NTRS1994

Ultraviolet interstellar polarization observed with the Hubble Space Telescope

We have used the Faint Object Spectrograph of the Hubble Space Telescope to observe interstellar linear polarization from 1300 to 3300 A in two stars with well-studied interstellar polarization at visible wavelenths. The wavelength dependence of linear polarization declines smoothly with decreasing wavelength and is devoid of structure associated with the prominent 2175 A absorption bump in the interstellar extinction curve. The data for one star (HD 161056) are consistent with an extrapolation based on the Serkowski formula of a fit to the ground-based polariztion; the other star (HD 7252) shows excess (super-Serkowski) polarization relative to the extrapolation. Out of a total of 10 stars now studied by means of spectropolarimetry in the satellite ultraviolet, including eight obseved with the Wisconsin Ultraviolet Photopolarimeter, five (those of longest lambda (sub max)) show Serkowski behavior, and four others show super-Serkowski behavior; only one (HD 197770) shows evidence for polarization associated with the 2175 A bump. These results place important constraints on the nature of the bump feature.

Somerville, W. B.↗
NASA NTRS1994

Cosmic microwave background anisotropies in cold dark matter models with cosmological constant: The intermediate versus large angular scales

We obtain predictions for cosmic microwave background anisotropies at angular scales near 1 deg in the context of cold dark matter models with a nonzero cosmological constant, normalized to the Cosmic Background Explorer (COBE) Differential Microwave Radiometer (DMR) detection. The results are compared to those computed in the matter-dominated models. We show that the coherence length of the Cosmic Microwave Background (CMB) anisotropy is almost insensitive to cosmological parameters, and the rms amplitude of the anisotropy increases moderately with decreasing total matter density, while being most sensitive to the baryon abundance. We apply these results in the statistical analysis of the published data from the UCSB South Pole (SP) experiment (Gaier et al. 1992; Schuster et al. 1993). We reject most of the Cold Dark Matter (CDM)-Lambda models at the 95% confidence level when both SP scans are simulated together (although the combined data set renders less stringent limits than the Gaier et al. data alone). However, the Schuster et al. data considered alone as well as the results of some other recent experiments (MAX, MSAM, Saskatoon), suggest that typical temperature fluctuations on degree scales may be larger than is indicated by the Gaier et al. scan. If so, CDM-Lambda models may indeed provide, from a point of view of CMB anisotropies, an acceptable alternative to flat CDM models.

Stompor, Radoslaw↗
NASA NTRS1994

Probing the interstellar medium with pulsars on AU scales

We present a new technique, multiepoch observations of 21 cm absorption against high-velocity pulsars, to probe the properties of the cold neutral hydrogen gas (H I) in the interstellar medium (ISM) at AU scales. In three epochs, over a 1.7 yr interval, we find evidence for significant opacity variations toward all of the pulsars in our sample. Small-scale structure in the ISM is detected on a range of scales from 5 AU to 100 AU, over a wide range of distances (50-2600 pc), opacities (tau(sub max) = 0.1 - 2.5) and directions (anticenter, interarm, high latitude, and local ISM). It appears that small-scale structure is a general property of the ISM and is not confined to special lines of sight. A significant fraction (10%-15%) of the cold H I gas is in this form. These opacity variations do not show any strong correlations with such parameters as transverse distance or integrated opacity, and there is no obvious relation between these structures and those seen in the ionized phase of the ISM.

Frail, Dale A.↗
NASA NTRS1994

Implications of the BATSE data for a helocentric origin of gamma-ray bursts

Several possible models have been suggested to explain the observed distribution of gamma-ray bursts: heliocentric distributions such as the Oort cloud, large galactic halos, and cosmological models. We report here on an investigation into the implications of the Burst and Transient Source Experiment (BATSE) gamma-ray burst distribution (Meegan et al. 1992a) data on the possible helocentric origin of gamma-ray bursts. We find no statistically significant anisotropy in the angular distribution of the bursts in a Sun-referenced coordinate system; there is no dipole moment in the direction of the Sun, and no quardrupole moment associated with the ecliptic plane. We have employed direct analytic calculations and Monte Carlo simulations of sources in the Oort cloud to constrain possible helicentric burst distributions. These can produce distributions consistent with the observed angular isotropy, the meal value of V/V(sub max), and the observed C/C(sub min) distribution of BATSE, and provide limits to burst energy of a few times approximately 10(exp 27) ergs. However, the agreement of the heliocentric C/C(sub min) distributions with the BATSE data is attributable to the relatively limited sampling of strong, nearby bursts. These bursts are known from observation to be homogeneously distributed, yet the density of sources in the Oort cloud is not constant in this region. Integral number-intensity distributions from the Oort cloud for larger numbers of bursts cannot reproduce the known homogeneity of the strong bursts without modification to the computed cometary number density and are therefore unlikely explanations of the gamma-ray burst distribution.

Horack, J. M.↗
NASA NTRS1994

Cluster evolution and microwave source counts

We present the modeled counts for the expected Sunyaev-Zel'dovich microwave sources associated with clusters of galaxies, predicted for experiments with arcminute-scale spatial resolution, assuming self-similar cluster evolution, for different spectra of the primordial density fluctuations and values of the cosmological density parameter Omega. Our simulations show that the source counts should be a powerful test of the evolution of very high redshift clusters. Experiments with 1 - 2 min spatial resolution, with moderate sensitivity but covering a large area of the sky, would be most effective for studying the SZ source population. Recent arcminute-scale radio experiments, the Owens Valley Radio Observatory (OVRO) RING experiment and VLA deep imaging, achieved sensitivity and sky coverage close to that needed for the detection of negative sources associated with very distant clusters. From the absence of cluster detections in these experiments, we rule out, with 90% confidence, models with Omega less than 0.3 and n = +1 as predicting too many bright sources; or there is no hot gas in clusters more distant than z(sub max) = 5 in such models. If the single negative source detected in the RING experiment is a distant cluster, the Omega = 1, n = -2 model also may be ruled out as it predicts too few sources. The new generation of telescopes, including the new SUZIE and Ryle instruments, will soon be able to detect distant clusters. The cluster population in the past has been modeled by scaling the observed present-day sample of X-ray clusters back to high redshifts, an approach which makes the best use of the observed cluster gas parameters, and makes the simulations robust to the assumed evolution at very early epochs. Although the pure self-similar model may be incompatible with the variety of observed evolutionary effects, we show that reasonable modifications to the intracluster gas history in that model, proposed to reconcile the self-similar evolution of cluster mass and the observed evolution of their X-ray luminosity, do not considerably change our microwave predictions made using the pure self-similar model. That is, the results of our simulations are applicable to the wide class of evolutionary models in which the cluster gas mass times gas temperature evolves as the dark mass times cluster virial temperature.

Markevitch, M.↗
NASA NTRS1994

Day 640 infrared line and continuum measurements: Dust formation in SN 1987A

We have measured day 640-645 line and continuum spectra of (Ni II) 6.6 micrometer (Ne II) 12.8 micrometer (line emission was not detected), and (Fe II) 17.9 and 26.0 micrometer from SN 1987A. The high velocity feature at v(sub HVF) approximately 3900 km/sec found in both of our day 410 (Fe II) spectra is again detected in the day 640 (Ni II) spectrum, although the signal-to-noise of the day 640 (Fe II) spectra is insufficient to show this feature. The continuum fluxes provide clear evidence for the formation of dust between day 410 and day 640 and are best fitted by a graybody spectrum with a temperature of 342 +/- 17 K at day 640 and a surface area corresponding to a minimum dust velocity v(sub dust) = 1910 +/- 170 km/sec. Optically thin dust emissivity laws proportional to lambda(exp -1) or lambda(exp -2) are inconsistent with the data. Either the dust grains are large (radius a much greater than 4 micrometer and radiate like individual blackbodies, or else they are located in clumps optically thick in the 6-26 micrometer range. The (Ni II) 6.6 micrometer line flux yields a minimum Ni(+) mass of 5.8 +/- 1.6 x 10(exp -4) solar mass and a Ni/Fe abundance ratio of 0.06 +/- 0.02, equal to the solar value. The ratio of the two (Fe II) line profiles implies a gas temperature 2600 +/- 700 K, a drop of 1800 +/- 800 K from our day 410 measurement. The (Fe II) 26.0 micrometer line flux has decreased by a factor of 2 and the day 640 (Ni II) profile is blueshifted by -440 +/- 270 km/sec, relative to observations before day 500. We show that the decrease in the (Fe II) flux and the blueshift are not produced by a decrease in electron scattering optical depth, electron density, or temperature, but rather are probably due to obscuration by the same dust which produces the infrared continuum. This supports the interpretation that the dust spectrum is produced by optically thick clumps. We discuss possible explanations for the discrepancy between the mass of Fe(+) detected and the total iron mass required to power the light curve. The decrease in the (Fe II) fluxes relative to the decrease required to account for the blueshifts of optical lines from non-iron-group elements and the similarity between v(sub dust) and the Ni(+) expansion velocity imply a spatial association between the dust clumps and the iron-group elements. In addition, the larger blueshift observed for the near and far-infrared, heavy metal transitions relative to non-iron-group lines suggests that the iron-group elements are somewhat segregated from lighter elements such as the Mg(sup 0) and O(sup 0) responsible for shorter wavelength lines. We speculate that FeS may be an important constituent of the dust. A comparison of our line profiles with radiative transfer models shows that while power law and exponential density distributions yield reasonable fits to the data, polytrope distributions provided significantly worse agreement. The best fits require a substantial fraction of the iron to be undetectable, and are consistent with maximum expansion velocities of v(sub max) approximately 3000 km/sec.

Colgan, Sean W. J.↗
NASA NTRS1994

Measurements of anisotropy in the cosmic microwave background radiation at degree angular scales near the stars Sigma Herculis and Iota Draconis

We present results from two four-frequency observations centered near the stars Sigma Herculis and Iota Draconis during the fourth flight of the Millimeter-wave Anisotropy eXperiment (MAX). The observations were made of 6 deg x 0.6 deg strips of the sky with a 1.4 deg peak to peak sinusoidal chop in all bands. The full width at half maximum (FWHM) beam sizes were calculated 0.55 deg +/- 0.05 deg at 3.5/cm and a 0.75 deg +/- 0.05 deg at 6, 9, and 14/cm. Significant correlated structures were observed at 3.5, 6, and 9/cm. The spectra of these signals are inconsistent with thermal emission from known interstellar dust populations. The extrapolated amplitudes of synchrotron and free-free emission are too small to account for the amplitude of the observed structures. If the observed structures are attributed to cosmic microwave background (CMB) anisotropy with a Gaussian autocorrelation function and a coherence angle of 25 min, then the most probable values at Delta T/T(sub CMB) = 3.1 (sup +1.7 sub -1.3) x 10(exp -5) for the Sigma Herculis scan, and Delta T/T(sub CMB) = 3.3(sup +1.1 sub -1.1) x 10(exp -5) for the Iota Draconis scan (95% confidence upper, lower limits).

Clapp, A. C.↗
NASA NTRS1994

Analysis of small-scale microwave background radiation anisotropy in the presence of foreground contamination

Many of the current round of experiments searching for anisotropies in the microwave background radiation (MBR) are confronting the problem of how to disentangle the cosmic signal from contamination due to Galactic and intergalactic foreground sources. Here we show how commonly used likelihood function techniques can be generalized to account for foreground. Specifically we set some restrictions on the spectrum of foreground contamination but allow the amplitude to vary arbitrarily. The likelihood function thus generalized gives reasonable limits on the MBR anisotropy which, in some cases, are not much less restrictive than what one would get from more detailed modeling of the foreground. Furthermore, the likelihood function is exactly the same as one would obtain by simply projecting out foreground contamination and looking at the reduced data set. We apply this generalized analysis to the recent medium-angle data sets of ACME-HEMT (Gaier et al. 1992; Schuster et al. 1993) and MAX (Meinhold et al. 1993; Gunderson et al. 1993). The resulting analysis constrains the one free parameter in the standard cold dark matter theory to be Q(sub rms-ps) = 18(sub -5 sup +8) microKelvin. This best fit value, although in striking agreement with the normalization from Cosmic Background Explorer (COBE), is not a very good fit, with an overall chi-squared/degrees of freedom = 208/168. We also argue against three commonly used methods of dealing with foreground: (1) ignoring it completely; (2) subtracting off a best-fit foreground and treating the residuals as if uncontaminated; and (3) culling data which appears to be contaminated by foreground.

Dodelson, Scott↗
NASA NTRS1993

Is PSR 1509-58 the remnant of supernova AD 185?

Thorsett has recently advanced the proposal that the counterpart of the supernova recorded by Chinese astronomers in AD 185 is the pulsar PSR 1509-58 in the supernova remnant MSH 15-52. This proposal is attractive since it was claimed to better fit the visibility contraints that plagued earlier identifications and since the spin-down age of the pulsar is 1690 years. I have examined in detail the question of the visibility of a supernova at the proposed position and find that the reported dates of visibility can be matched only if the supernova appeared substantially brighter than Venus at its peak. For the distance and extinction to the pulsar, this implies M(sub V) (max) was brighter than -21.4 mag, whereas the brightest known absolute magnitude of a Type II supernova is -19.65 (H(sub 0) = 75 km/s/Mpc). Thus, the high required luminosity can be used as good evidence against the identification of SN 185 with PSR 1509-58. However, if the identification is retained, then Hubble's Constant would have to have a small value and/or the supernova had to have been a type IIP event with exceptional brilliance. The earlier identification of SN 185 with MSH 14-63 by Clark and Stephenson can also be reconciled with the visibility data.

Schaefer, Bradley E.↗
NASA NTRS1994

New jovian ring?

We follow the orbital evolution of small dust particles generated from the break up of comet Shoemaker-Levy 9 (SL9). In addition to the usual perturbations, we also consider electrostatic charging and the consequent magnetospheric effects. We show, that in about ten years following the break up, a small fraction of the dust will settle into orbits well inside the magnetosphere. The forming ring will be comprised of dust particles with radii in the range of 1.5 less than alpha less than 2.5 micrometers that follow retrograde orbits in the radial range of 4.5 less than r less than 6 R(sub J). We estimate the peak optical depth of this new ring in the range of 10(exp -8) less than tau(sub max) less than 2 x 10(exp -6).

Horanyi, Mihaly↗
NASA NTRS1994

A simple hydrologically based model of land surface water and energy fluxes for general circulation models

A generalization of the single soil layer variable infiltration capacity (VIC) land surface hydrological model previously implemented in the Geophysical Fluid Dynamics Laboratory (GFDL) general circulation model (GCM) is described. The new model is comprised of a two-layer characterization of the soil column, and uses an aerodynamic representation of the latent and sensible heat fluxes at the land surface. The infiltration algorithm for the upper layer is essentially the same as for the single layer VIC model, while the lower layer drainage formulation is of the form previously implemented in the Max-Planck-Institut GCM. The model partitions the area of interest (e.g., grid cell) into multiple land surface cover types; for each land cover type the fraction of roots in the upper and lower zone is specified. Evapotranspiration consists of three components: canopy evaporation, evaporation from bare soils, and transpiration, which is represented using a canopy and architectural resistance formulation. Once the latent heat flux has been computed, the surface energy balance is iterated to solve for the land surface temperature at each time step. The model was tested using long-term hydrologic and climatological data for Kings Creek, Kansas to estimate and validate the hydrological parameters, and surface flux data from three First International Satellite Land Surface Climatology Project Field Experiment (FIFE) intensive field campaigns in the summer-fall of 1987 to validate the surface energy fluxes.

Liang, XU↗
NASA NTRS1993

Hybrid simulations of thin current sheets

A one-dimensional, hybrid simulation code is used to study current sheets with a nonzero normal magnetic field B(sub z) and a dawn-to-dusk electric field E(sub y). Such configurations are dependent upon only two parameters: we use the normalized normal magnetic field B-normalized (sub z) = B(sub z)/(4(pi)(n(sub b)) (v(exp 2 sub T))(exp 1/2) and normalized electric field V-normalized (sub D) = (1/V(sub T)(cE(sub y)/B(sub z)), where V(sub T) is the thermal velocity of ions prior to their interaction with the current sheet and n(sub b) is the number density outside the current sheet (at the simulation boundary). A third parameter that is relevant to the motion of particles in current sheets is kappa(sub A), the value of kappa = (R(sub min)/rho(sub max))(exp 1/2) for particles of average energy. We find that if either B-normalized (sub z) is close to or greater than 1, or if kappa(sub A) is close to 1, a rotational mode develops in which the z = 0 current rotates with the ion sense about the normal magnetic field, while for small values of both B-normalized (sub z) or kappa(sub A), the configuration is quasi-steady. To achieve values of kappa(sub A) of the order of or larger than 1, we decrease the value of V-normalized (sub D) uniformly. We find that the magnetic field fluctuations and particle distribution functions are similar in many respects to what was observed in the day 240, 1986, Active Magnetospheric Particle Tracer Explorer (AMPTE)/CCE current disruption event, an event that appears to be located at the site of initiation of current disruption and related particle energization.

Burkhart, G. R.↗