Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MANIPULATORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Precision Manipulation with Cooperative Robots

This work addresses several challenges of cooperative transportThis work addresses several challenges of cooperative transport and precision manipulation. Precision manipulation requires a rigid grasp, which places a hard constraint on the relative rover formation that must be accommodated, even though the rovers cannot directly observe their relative poses. Additionally, rovers must jointly select appropriate actions based on all available sensor information. Lastly, rovers cannot act on independent sensor information, but must fuse information to move jointly; the methods for fusing information must be determined.

multi-robot teams↗
NASA NTRS2008

Sample Manipulation System for Sample Analysis at Mars

The Sample Analysis at Mars (SAM) instrument will analyze Martian samples collected by the Mars Science Laboratory Rover with a suite of spectrometers. This paper discusses the driving requirements, design, and lessons learned in the development of the Sample Manipulation System (SMS) within SAM. The SMS stores and manipulates 74 sample cups to be used for solid sample pyrolysis experiments. Focus is given to the unique mechanism architecture developed to deliver a high packing density of sample cups in a reliable, fault tolerant manner while minimizing system mass and control complexity. Lessons learned are presented on contamination control, launch restraint mechanisms for fragile sample cups, and mechanism test data.

Mumm, Erik↗
NASA NTRS2008

Design and Field Test of a Mass Efficient Crane for Lunar Payload Handling and Inspection: The Lunar Surface Manipulation System

Devices for lifting, translating and precisely placing payloads are critical for efficient Earthbased construction operations. Both recent and past studies have demonstrated that devices with similar functionality will be needed to support lunar outpost operations. Lunar payloads include: a) prepackaged hardware and supplies which must be unloaded from landers and then accurately located at their operational site, b) sensor packages used for periodic inspection of landers, habitat surfaces, etc., and c) local materials such as regolith which require grading, excavation and placement. Although several designs have been developed for Earth based applications, these devices lack unique design characteristics necessary for transport to and use on the harsh lunar surface. These design characteristics include: a) composite components, b) compact packaging for launch, c) simple in-field reconfiguration and repair, and d) support for tele-operated or automated operations. Also, in contrast to Earth-based construction, where special purpose devices dominate a construction site, a lunar outpost will require versatile devices which provide operational benefit from initial construction through sustained operations. This paper will detail the design of a unique, high performance, versatile lifting device designed for operations on the lunar surface. The device is called the Lunar Surface Manipulation System to highlight the versatile nature of the device which supports conventional cable suspended crane operations as well as operations usually associated with a manipulator such as precise positioning where the payload is rigidly grappled by a tool attached to the tip of the device. A first generation test-bed to verify design methods and operational procedures is under development at the NASA Langley Research Center and recently completed field tests at Moses Lake Washington. The design relied on non-linear finite element analysis which is shown to correlate favorably with laboratory experiments. A key design objective, reviewed in this paper, is the device s simplicity, resulting from a focus on the minimum set of functions necessary to perform payload offload. Further development of the device has the potential for significant mass savings, with a high performance device incorporating composite elements estimated to have a mass less than 3% of the mass of the maximum lunar payload lifted at the tip. The paper will conclude with future plans for expanding the operational versatility of the device.

Doggett, William R.↗
NASA NTRS2012

Apparatus and methods for manipulation and optimization of biological systems

The invention provides systems and methods for manipulating, e.g., optimizing and controlling, biological systems, e.g., for eliciting a more desired biological response of biological sample, such as a tissue, organ, and/or a cell. In one aspect, systems and methods of the invention operate by efficiently searching through a large parametric space of stimuli and system parameters to manipulate, control, and optimize the response of biological samples sustained in the system, e.g., a bioreactor. In alternative aspects, systems include a device for sustaining cells or tissue samples, one or more actuators for stimulating the samples via biochemical, electromagnetic, thermal, mechanical, and/or optical stimulation, one or more sensors for measuring a biological response signal of the samples resulting from the stimulation of the sample. In one aspect, the systems and methods of the invention use at least one optimization algorithm to modify the actuator's control inputs for stimulation, responsive to the sensor's output of response signals. The compositions and methods of the invention can be used, e.g., to for systems optimization of any biological manufacturing or experimental system, e.g., bioreactors for proteins, e.g., therapeutic proteins, polypeptides or peptides for vaccines, and the like, small molecules (e.g., antibiotics), polysaccharides, lipids, and the like. Another use of the apparatus and methods includes combination drug therapy, e.g. optimal drug cocktail, directed cell proliferations and differentiations, e.g. in tissue engineering, e.g. neural progenitor cells differentiation, and discovery of key parameters in complex biological systems.

Ho, Chih-Ming↗
NASA NTRS2014

Apparatus and Methods for Manipulation and Optimization of Biological Systems

The invention provides systems and methods for manipulating biological systems, for example to elicit a more desired biological response from a biological sample, such as a tissue, organ, and/or a cell. In one aspect, the invention operates by efficiently searching through a large parametric space of stimuli and system parameters to manipulate, control, and optimize the response of biological samples sustained in the system. In one aspect, the systems and methods of the invention use at least one optimization algorithm to modify the actuator's control inputs for stimulation, responsive to the sensor's output of response signals. The invention can be used, e.g., to optimize any biological system, e.g., bioreactors for proteins, and the like, small molecules, polysaccharides, lipids, and the like. Another use of the apparatus and methods includes is for the discovery of key parameters in complex biological systems.

Ho, Chih-Ming↗
NASA NTRS2015

Application of a Novel Long-Reach Manipulator Concept to Asteroid Redirect Missions

A high priority mission currently being formulated by NASA is to capture all or part of an asteroid and return it to cis-lunar space for examination by an astronaut crew. Two major mission architectures are currently being considered: in the first (Mission Concept A), a spacecraft would rendezvous and capture an entire free flying asteroid (up to 14 meters in diameter), and in the second (Mission Concept B), a spacecraft would rendezvous with a large asteroid (which could include one of the Martian moons) and retrieve a boulder (up to 4 meters in diameter). A critical element of the mission is the system that will capture the asteroid or boulder material, enclose it and secure it for the return flight. This paper describes the design concepts, concept of operations, structural sizing and masses of capture systems that are based on a new and novel Tendon- Actuated Lightweight In-Space MANipulator (TALISMAN) general-purpose robotic system. Features of the TALISMAN system are described and the status of its technology development is summarized. TALISMAN-based asteroid material retrieval system concepts and concepts-of-operations are defined for each asteroid mission architecture. The TALISMAN-based capture systems are shown to dramatically increase operational versatility while reducing mission risk. Total masses of TALISMAN-based systems are presented, reinforcing the mission viability of using a manipulator-based approach for the asteroid redirect mission.

Dorsey, John T.↗
NASA NTRS2014

Analyzing Array Manipulating Programs by Program Transformation

We explore a transformational approach to the problem of verifying simple array-manipulating programs. Traditionally, verification of such programs requires intricate analysis machinery to reason with universally quantified statements about symbolic array segments, such as "every data item stored in the segment A[i] to A[j] is equal to the corresponding item stored in the segment B[i] to B[j]." We define a simple abstract machine which allows for set-valued variables and we show how to translate programs with array operations to array-free code for this machine. For the purpose of program analysis, the translated program remains faithful to the semantics of array manipulation. Based on our implementation in LLVM, we evaluate the approach with respect to its ability to extract useful invariants and the cost in terms of code size.

Program Transformation↗
NASA NTRS2015

Control System Design Implementation and Preliminary Demonstration for a Tendon-Actuated Lightweight In-Space MANipulator (TALISMAN)

Satellite servicing is a high priority task for NASA and the space industry, addressing the needs of a variety of missions, and potentially lowering the overall cost of missions through refurbishment and reuse. However, the ability to service satellites is severely limited by the lack of long reach manipulation capability and inability to launch new devices due the end of the Space Transport System, or Space Shuttle Program. This paper describes the design and implementation of a control system for a Tendon-Actuated Lightweight In-Space MANipulator (TALISMAN), including; defining the forward and inverse kinematics, endpoint velocity to motor velocity, required cable tensions, and a proportional-integral-derivative (PID) controller. The tensions and velocities necessary to maneuver and capture small and large payloads are also discussed. To demonstrate the utility of the TALISMAN for satellite servicing, this paper also describes a satellite servicing demonstration using two TALISMAN prototypes to grasp and inspect a satellite mockup. Potential avenues for improving the control system are discussed.

Komendera, Erik E.↗
NASA NTRS2016

Covariance Manipulation for Conjunction Assessment

The manipulation of space object covariances to try to provide additional or improved information to conjunction risk assessment is not an uncommon practice. Types of manipulation include fabricating a covariance when it is missing or unreliable to force the probability of collision (Pc) to a maximum value ('PcMax'), scaling a covariance to try to improve its realism or see the effect of covariance volatility on the calculated Pc, and constructing the equivalent of an epoch covariance at a convenient future point in the event ('covariance forecasting'). In bringing these methods to bear for Conjunction Assessment (CA) operations, however, some do not remain fully consistent with best practices for conducting risk management, some seem to be of relatively low utility, and some require additional information before they can contribute fully to risk analysis. This study describes some basic principles of modern risk management (following the Kaplan construct) and then examines the PcMax and covariance forecasting paradigms for alignment with these principles; it then further examines the expected utility of these methods in the modern CA framework. Both paradigms are found to be not without utility, but only in situations that are somewhat carefully circumscribed.

Conjunction↗
NASA NTRS2017

BILL-E: Robotic Platform for Locomotion and Manipulation of Lightweight Space Structures

We describe a robotic platform for traversing and manipulating a modular 3D lattice structure. The robot is designed to operate within a specifically structured environment, which enables low numbers of degrees of freedom (DOF) compared to robots performing comparable tasks in an unstructured environment. This allows for simple controls, as well as low mass and cost. This approach, designing the robot relative to the local environment in which it operates, results in a type of robot we call a "relative robot." We describe a bipedal robot that can locomote across a periodic lattice structure, as well as being able to handle, manipulate, and transport building block parts that compose the lattice structure. Based on a general inchworm design, the robot has added functionality for traveling over and operating on a host structure.

Aeronautics↗
NASA NTRS2017

Structure Assembly by a Heterogeneous Team of Robots Using State Estimation, Generalized Joints, and Mobile Parallel Manipulators

Autonomous robotic assembly by mobile field robots has seen significant advances in recent decades, yet practicality remains elusive. Identified challenges include better use of state estimation to and reasoning with uncertainty, spreading out tasks to specialized robots, and implementing representative joining methods. This paper proposes replacing 1) self-correcting mechanical linkages with generalized joints for improved applicability, 2) assembly serial manipulators with parallel manipulators for higher precision and stability, and 3) all-in-one robots with a heterogeneous team of specialized robots for agent simplicity. This paper then describes a general assembly algorithm utilizing state estimation. Finally, these concepts are tested in the context of solar array assembly, requiring a team of robots to assemble, bond, and deploy a set of solar panel mockups to a backbone truss to an accuracy not built into the parts. This paper presents the results of these tests.

Komendera, Erik E.↗
NASA NTRS2018

Bipedal Isotropic Lattice Locomoting Explorer: Robotic Platform for Locomotion and Manipulation of Discrete Lattice Structures and Lightweight Space Structures

A robotic platform for traversing and manipulating a modular 3D lattice structure is described. The robot is designed specifically for its tasks within a structured environment, and is simplified in terms of its numbers of degrees of freedom (DOF). This allows for simpler controls and a reduction of mass and cost. Designing the robot relative to the environment in which it operates results in a specific type of robot called a "relative robot". Depending on the task and environment, there can be a number of relative robots. This invention describes a bipedal robot which can locomote across a periodic lattice structure made of building block parts. The robot is able to handle, manipulate, and transport these blocks when there is more than one robot. Based on a general inchworm design, the robot has added functionality while retaining minimal complexity, and can perform numerous maneuvers for increased speed, reach, and placement.

Jenett, Benjamin↗
NASA NTRSDate not supplied

Lightweight Surface Manipulation System (LSMS) Overview for Blue Origin

The Lightweight Surface Manipulation System is a long-reach, low mass, deployable manipulator, using design principles of structurally efficient commercial cranes, with the enhanced dexterity and multi-functionality of a robotic arm. This is a presentation given to Blue Origin on 08/21/20.

Thomas Carno Jones↗
NASA NTRSDate not supplied

Tendon-Actuated Lightweight In-Space MANipulator (TALISMAN) Hinge Joint Structural Performance

The Tendon Actuated Lightweight In-Space MANipulator (TALISMAN), invented and initially developed under the Space Technology Mission Directorate Human Robotics Systems program, is a tendon-actuated robot that established a new structural architecture for long-reach space manipulators. The TALISMAN is designed to have significant stiffness and strength in the plane of the tendons or cables, and operations are designed such that all primary loads are applied in that same plane. However, during normal operations it is possible for out-of-plane forces to be applied on the TALISMAN when secondary loads are imparted by a tool or action at the wrist. These secondary loading conditions will induce out-of-plane bending loads in the TALISMAN hinge joints. The TALISMAN hinge joints must be designed for these out-of-plane loads, to ensure no failure of the joint occurs during operations. A series hinge joint out-of-plane stiffness tests were conducted at five different joint angles; at three cable pre-loads from 25-lbf to 100-lbf; up to an equivalent out-of-plane tip load of 27.28-lbf at the end of a 51-in. long distal link. The objective of the tests was to provide an initial set of deflection, cable load, and strain data to inform accurate modeling of the hinge joint out-of-plane stiffness. The test objective was achieved by developing an FEM of the hinge joint able to predict tip displacement to within 10% of values measured in tests. The hinge joint FEM may now be implemented into a full-scale analysis model of the TALISMAN V2.0 to provide predictions of out-of-plane displacement under different load and joint angle conditions.

Matthew K Mahlin↗
NASA NTRSDate not supplied

A Protoflight Lightweight Surface Manipulation System to Enable High-Load, Long-Reach Lunar Surface Operations

There is a current critical need under the Artemis program for a versatile, high-load, long reach manipulation system that can provide payload offloading and handling for lunar landers. The Lightweight Surface Manipulation System (LSMS) is a highly structurally efficient, long-reach robotic arm that can be sized for a wide range of missions and payload ranges. The LSMS has more than a decade of heritage and testing at NASA Langley Research Center (LaRC), including laboratory and field testing of multiple end-effector tools and operational scenarios. With the need for rapid development of a flight-proven offloading capability and the desire to have that device be reusable for future missions and services, a 4-year program was initiated this year under NASA’s Space Technology Mission Directorate, to develop and build a protoflight unit of the LSMS, capable of lifting 1,000 kg on the Moon at an 8-meter reach. The target mission is to fly on a large cargo lander as a technology demonstrator to validate self-leveling, deployment, and payload handling operations, with future flights adding additional tools and capabilities. This paper provides a summary of the prior decade of work on the LSMS, the current mission drivers and goals, and details the first year of development of the LSMS toward a protoflight unit.

LSMS↗
NASA NTRSDate not supplied

LSMS–L35, Miniature Crane for Payload Offloading and Manipulation: Development, and Application

The Lightweight Surface Manipulation System (LSMS) is a robotic agent for autonomous surface construction activities on planetary surfaces, that was designed at NASA Langley Research Center and has over a decade of research and development. The LSMS is a key component to achieving many goals of the NASA Artemis program. The LSMS is lightweight, structurally efficient system that can be easily packaged for launch and deployment on-surface, capable of a suite of surface activities enabled by modular end-effectors at the wrist. The focus of recent development work has been on using the LSMS for payload offloading and handling from lunar landers. Discussed in the paper is the development of the LSMS-L35 hardware (35 kg wrist lifting capacity on the lunar surface), designed to integrate with a Commercial Lunar Payload Services (CLPS) lander to offload payloads to the surface. The LSMS-L35 hardware development is part of a larger effort to enable autonomous payload handling and manipulation.

Iok M. Wong↗
NASA NTRSDate not supplied

Uncertainty in Servicing and Assembly Tasks for Space Robotic Manipulators

This presentation will discuss a subset of the sources of uncertainty that impact autonomous in-space servicing, assembly, and manufacturing missions. These include robotic manipulator modeling uncertainties in both kinematics and dynamics, perception error associated machine learning models for pose estimation, and sensor noise. Mitigation strategies will be discussed including the incorporation of capture envelopes in the design of robotic tools and selection of robot goal poses to minimize end-effector sensitivity in manipulators with redundant degrees of freedom.

robotics↗
NASA NTRSDate not supplied

Efficient and Singularity-Aware Inverse Kinematics for 6-DOF and 7-DOF Revolute Manipulators

Inverse kinematics (IK) for 6-DOF and 7-DOF revolute robot manipulators may be decomposed into canonical subproblems which find the angles on circles where they intersect with other geometric objects. We present new algebraic solutions and geometric interpretations for six subproblems. We demonstrate significant performance improvements over existing IK methods. 7-DOF manipulators have one redundant DOF to parameterize, so we introduce the general SEW angle, which generalizes the conventional SEW angle but with an arbitrary reference direction function. One special choice, the stereographic SEW angle, has a singularity when the wrist is on a half-line instead of a full line.

Computational Geometry↗