Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Demagnetization of Nd 2 Fe 14 B, Pr 2 Fe 14 B, and Sm 2 Co 17 Permanent Magnets in Spallation Irradiation Fields

Prompted by the need for radiation-resistant permanent magnets for insertion devices (IDs) of high-brilliance next-generation synchrotrons such as the National Synchrotron Light Source II, the demagnetization of Nd 2 Fe 14 B and Pr 2 Fe 14 B was studied after exposure to a mixed irradiating field. Degradation and damage of the permanent magnetic material by components of electromagnetic showers induced in magnets by intense high-energy electron beams will alter the magnetic field structure of the IDs. Plate-like Nd 2 Fe 14 B magnets were irradiated to 1.8 Grad dose and were evaluated against Pr 2 Fe 14 B magnets irradiated to a lower dose of 20 Mrad. In addition, annular Sm 2 Co 17 and Nd 2 Fe 14 B magnets integrated within a ferrofluidic feedthrough (FFFT) rotary seal were also irradiated to dose levels of 2 Grad for Sm 2 Co 17 and 20 Mrad for Nd 2 Fe 14 B. Post-irradiation measurements of the magnetic intensity revealed that severe demagnetization exceeding 85% occurs in Nd 2 Fe 14 B magnets after only 50 Mrad dose and over 87% for Pr 2 Fe 14 B after 10 Mrad dose. The annular-shaped Sm 2 Co 17 magnets of the FFFTs were almost insensitive to irradiation up to a dose of 2 Grad. Annular-shaped Nd 2 Fe 14 B magnets also showed resistance to demagnetization, a direct consequence of the annular shape which is characterized by the removal of the stronger demagnetizing field present at the center of a disk-like magnet. As a result, the sensitivity of boron-based permanent magnets to neutron energy (thermal versus fast) was also assessed via specifically designed experiments and discussed.

43 PARTICLE ACCELERATORS↗

Transport of polarized neutrons through magnetic noncoplanar layered systems

The transport of neutrons through noncoplanar systems is shown to have a partly unidirectional character. To this end, the transmission of a three-layer magnetic film with a noncoplanar magnetization in the absence of applied magnetic field and the transmission of a two-layer magnetic film with a noncollinear magnetization in the presence of a magnetic field are calculated. The calculations demonstrate that, if the losses in the films are neglected, the transmissions in two opposite directions differ only for processes with and without spin flip. If these losses are taken into account, the total transmissions of a nonpolarized neutron beam in two opposite directions are also different. The consequences of these specific features of noncoplanar systems are discussed.

43 PARTICLE ACCELERATORS↗

On the theory of the magnetoviscous effect in ferrofluids

The microscopic origin of viscoelastic effects in ferrofluids is studied theoretically. The growth kinetics of chain aggregates formed by magnetic ferroparticles under the action of the dipole-dipole interaction between them is analyzed. It is shown that the evolution rate for an ensemble of chains determines the rate of variation in the macroscopic stress of the medium upon a change in the applied external field and/or in the shear flow velocity. Consequently, the viscoelastic properties of magnetic fluids can be explained by the chain formation-destruction processes. The proposed microscopic model of a ferrofluid makes it possible (apparently, for the first time) to estimate the characteristic time of viscoelasticity corresponding to experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Temperature 300°C Measurement While Drilling System

Many countries around the world, including the USA, have untapped geothermal energy potential. Enhanced Geothermal Systems (EGS) technology is needed to economically utilize this resource. Temperatures in some EGS reservoirs can exceed 300°C. To effectively utilize EGS resources, an array of injection and production wells must be accurately placed in the formation fracture network. Therefore, EGS can greatly benefit from a high temperature directional drilling system. Most commercial services for directional drilling systems are rated for 175°C while geothermal wells require operation at much higher temperatures. Two U.S. Department of Energy (DOE) Geothermal Technologies Office (GTO) projects have been initiated to develop a 300°C capable directional drilling system, the first developing a drill bit, directional motor, and drilling fluid (award number DE-EE0002782), and the second adding navigation and telemetry systems. This report is for the second project, “High Temperature 300°C Measurement While Drilling System”, award number DE-EE0005505. The “High Temperature 300°C Measurement While Drilling (MWD)” system complements the already developed drilling system with real time navigation capability. It is comprised of 175°C directional measurement electronics including the required sensors for measuring inclination and azimuth in 3 axes. It is embedded in a cooling and temperature isolation system to protect the electronics and sensors from the higher temperature outside the system, which can reach 300°C. Building the cooling and isolation system from non-magnetic materials and keeping a required distance to any magnetic component, such as alternator parts, ensures a high quality measurement of the earth’s magnetic field. This is required to achieve the specified navigation accuracy. The MWD system has a turbine driven alternator that is capable of delivering the required electrical energy to the electronic system at a 300°C borehole temperature. Measured data will be communicated to the surface by mud-pulse-telemetry. For this purpose the tool has a mud-pulse-valve that is controlled by the measurement electronics to establish a serial data communication via the mud stream. The mud-pulse-valve is also built to operate under 300°C borehole conditions. Three prototypes of the 300°C MWD were built and tested. These systems are available for a joint application with the previously developed 300°C drilling system, in a geothermal well.

15 GEOTHERMAL ENERGY↗

2021 Annual Progress Report: Vertical GaN Device Development

This project is part of a multi-lab consortium that leverages U.S. research expertise and facilities at national labs and universities to significantly advance electric drive power density and reliability, while simultaneously reducing cost. The final objective of the consortium is to develop a 100 kW traction drive system that achieves 33 kW/L, has an operational life of 300,000 miles, and a cost of less than 6 dollars/kW. One element of the system is a 100 kW inverter with a power density of 100 kW/L and a cost of 2.7 dollars/kW. New materials such as wide-bandgap semiconductors, soft magnetic materials, and ceramic dielectrics, integrated using multi-objective co-optimization design techniques, will be utilized to achieve these program goals. This project focuses on a subset of the power electronics work within the consortium, specifically the design, fabrication, and evaluation of vertical GaN power devices suitable for automotive applications.

33 ADVANCED PROPULSION SYSTEMS↗

Epitaxial Electrodeposition of Wide Bandgap Semiconductors for Energy Conversion and Storage

The focus of this project was to electrodeposit epitaxial films and nanostructures of inorganic materials. Although electrodeposition is normally associated with the electroplating of metals, the emphasis in this work was the deposition of compound materials such as metal oxides, semiconductors, catalysts, and magnetic materials. An electrochemical/chemical approach was used, in which an electrochemical redox reaction was followed by a chemical reaction to produce the product. The materials were deposited as epitaxial thin films or nanostructures onto a single-crystal substrate that determined their in-plane and out-of-plane orientation. Epitaxial films can have enhanced properties due to the lack of grain boundaries. They can also produce catalytic materials which have enhanced reactivity due to the exposure of the most catalytically active surface. A method was developed to produce inexpensive single-crystal-like metal foils that could be used as the substrate to deposit materials for applications such as flexible electronics. It was also demonstrated that epitaxial films of inorganic materials could be produced by a simple spin-coating technique.

36 MATERIALS SCIENCE↗

Direct evidence for dominant bond-directional interactions in a honeycomb lattice iridate Na 2 IrO 3

We show that heisenberg interactions are ubiquitous in magnetic materials and play a central role in modelling and designing quantum magnets. Bond-directional interactions offer a novel alternative to Heisenberg exchange and provide the building blocks of the Kitaev model, which has a quantum spin liquid as its exact ground state. Honeycomb iridates, A 2 IrO 3 (A = Na, Li), offer potential realizations of the Kitaev magnetic exchange coupling, and their reported magnetic behaviour may be interpreted within the Kitaev framework. However, the extent of their relevance to the Kitaev model remains unclear, as evidence for bond-directional interactions has so far been indirect. Here we present direct evidence for dominant bond-directional interactions in antiferromagnetic Na 2 IrO 3 and show that they lead to strong magnetic frustration. Diffuse magnetic X-ray scattering reveals broken spin-rotational symmetry even above the Néel temperature, with the three spin components exhibiting short-range correlations along distinct crystallographic directions. Lastly, this spin- and real-space entanglement directly uncovers the bond-directional nature of these interactions, thus providing a direct connection between honeycomb iridates and Kitaev physics.

36 MATERIALS SCIENCE↗

Magneto-Dielectric Effects Induced by Optically-Generated Intermolecular Charge-Transfer States in Organic Semiconducting Materials

Traditionally, magneto-dielectric effects have been developed by combining ferroelectric and magnetic materials. Here, we show a magneto-dielectric effect from optically-generated intermolecular charge-transfer states in an organic semiconducting donor:acceptor (PVK:TCNB) system. We observe in magnetic field effects of photoluminescence that a magnetic field can change singlet/triplet population ratio in intermolecular charge-transfer states. Furthermore, our theoretical analysis and experimental evidence indicate that the singlets and triplets in charge-transfer states have stronger and weaker electrical polarizations, respectively. Therefore, the observed magneto-dielectric effect can be attributed to magnetically-dependent singlet/triplet ratio in intermolecular charge-transfer states. In principle, a magneto-dielectric effect can be generated through two different channels based on magneto-polarization and magneto-current effects when the singlet/triplet ratio in intermolecular charge-transfer states is changed by a magnetic field. We find, from the simulation of dielectric effects, that magneto-polarization and magneto-current effects play primary and secondary roles in the generation of magneto-dielectric effect.

36 MATERIALS SCIENCE↗

Liquid-like spin dynamics in a hybrid Heisenberg-Ising antiferromagnet

Two-dimensional (2D) materials and their heterostructures enable unconventional electronic properties and functionalities not accessible in their bulk counterparts. This approach is now being extended to magnetic materials to engineer their spin structures and magnetic fields produced by them. However, spin dynamics of 2D magnetic heterostructures remain largely unexplored. Here, we demonstrate that heterointerfacing Heisenberg square-lattice antiferromagnet (AF) Sr 2 IrO 4 with its bilayer variant Ising AF Sr 3 Ir 2 O 7 in a superlattice leads to liquid-like spin dynamics in the former, characterized by slow recovery of the AF order after its transient suppression by an optical pump, and complete absence of spin waves except in an immediate vicinity of the ordering wavevector. Instead, the spin excitation spectra are dominated by isotropic continua, which in previous works have been interpreted as fractional spin excitations, or spinons, that extends to unprecedentedly low energies. Thus, our results provide a pathway to frustrated magnetism in square lattices by heterointerfacing two distinct types of AFs.

RIXS↗

Stochastic nature of magnetic processes studied by full-field soft X-ray microscopy

In nanomagnetism, one of the crucial scientific questions is whether magnetic behaviors are deterministic or stochastic on a nanoscale. Apart from the exciting physical issue, this question is also of paramount highest relevance for using magnetic materials in a wealth of technological applications such as magnetic storage and sensor devices. In the past, the research on the stochasticity of a magnetic process has been mainly done by macroscopic measurements, which only offer ensemble-averaged information. To give more accurate answer for the question and to fully understand related underlying physics, the direct observation of statistical behaviors in magnetic structures and magnetic phenomena utilizing advanced characterization techniques is highly required. One of the ideal tools for such study is a full-field soft X-ray microscope since it enables imaging of magnetic structures on the large field of view within a few seconds. Here in this paper, we review the stochastic behaviors of various magnetic processes including magnetization reversal process in thin films, magnetic domain wall motions in nanowires, and magnetic vortex formations in nanodisks studied by full-field soft X-ray microscopy. The origin triggering the stochastic nature witnessed in each magnetic process and the way to control the intrinsic nature are also discussed.

36 MATERIALS SCIENCE↗

Generating high-order optical and spin harmonics from ferromagnetic monolayers

High-order harmonic generation (HHG) in solids has entered a new phase of intensive research, with envisioned band-structure mapping on an ultrashort time scale. This partly benefits from a flurry of new HHG materials discovered, but so far has missed an important group. HHG in magnetic materials should have profound impact on future magnetic storage technology advances. Here we introduce and demonstrate HHG in ferromagnetic monolayers. We find that HHG carries spin information and sensitively depends on the relativistic spin–orbit coupling; and if they are dispersed into the crystal momentum k space, harmonics originating from real transitions can be k-resolved and carry the band structure information. Geometrically, the HHG signal is sensitive to spatial orientations of monolayers. Different from the optical counterpart, the spin HHG, though probably weak, only appears at even orders, a consequence of SU(2) symmetry. Our findings open an unexplored frontier—magneto-high-order harmonic generation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THERMAL IMAGING OF ACTIVE MAGNETIC REGERNERATOR MCE MATERIALS DURING OPERATION

An active magnetic regenerator (AMR) prototype was constructed that incorporates a Gd sheet into the regenerator wall to enable visualization of the system s thermal transients. In this experiment, the thermal conditions inside the AMR are observed under a variety of operating conditions. An infrared (IR) camera is employed to visualize the thermal transients within the AMR. The IR camera is used to visually and quantitatively evaluate the temperature difference and thus giving means to calculate the performance of the system under the various operating conditions. Thermal imaging results are presented for two differing experimental test runs. Real time imaging of the thermal state of the AMR has been conducted while operating the system over a range of conditions. A 1 Tesla twin-coil electromagnet (situated on a C frame base) is used for this experiment such that all components are stationary during testing. A modular, linear reciprocating system has been realized in which the effects of regenerator porosity and utilization factor can be investigated. To evaluate the performance variation in porosity and utilization factor the AMR housing was constructed such that the plate spacing of the Gd sheets may be varied. Each Gd sheet has dimensions of 38 mm wide and 66 mm long with a thickness of 1 mm and the regenerator can hold a maximum of 29 plates with a spacing of 0.25 mm. Quantitative and thermal imaging results are presented for several regenerator configurations.

Shassere, Benjamin↗

Spin-informed universal graph neural networks for simulating magnetic ordering

The screening and discovery of magnetic materials are hindered by the computational cost of first-principles density-functional theory (DFT) calculations required to find the ground state magnetic ordering. Although universal machine-learning interatomic potentials (uMLIPs), also known as atomistic foundation models, offer high-fidelity models of many atomistic systems with significant speedup, they currently lack the inputs required for predicting magnetic ordering. In this work, we present a data-efficient, spin-informed graph neural network framework that incorporates spin degrees of freedom as inputs and preserves physical symmetries, extending the functionality of uMLIPs to simulate magnetic orderings. This framework speeds up DFT calculations through better initial guesses for magnetic moments, determines the ground-state ordering of bulk materials and even generalizes to magnetic ordering in surfaces. Furthermore, we implement a closed-loop anomaly detection approach that effectively addresses the classic "chicken-and-egg" problem of creating a high-quality dataset while developing a uMLIP, unearthing anomalies in large benchmark datasets and boosting model accuracy.

Xu, Wenbin↗

Long-time variation in magnetic structure of Ce(Ir x Rh 1– x ) 3 Si 2 : A new interpretation of time variation

Here, to clarify the key factor for the slow magnetic transitions in CeIr 3 Si 2 and other materials, magnetization and neutron scattering measurements have been carried out on the system Ce(Ir x Rh 1–x ) 3 Si 2 . In this system, a magnetic phase transition is accomplished through slow and fast processes. The fractions of these processes vary with the chemical composition x . A new interpretation of magnetic phase transitions, which includes the coexistence of two processes, is presented.

36 MATERIALS SCIENCE↗

Anomalous Hall effect from inter-superlattice scattering in a noncollinear antiferromagnet

Superlattice formation dictates the physical properties of many materials, including the nature of the ground state in magnetic materials. Chemical composition is commonly considered to be the primary determinant of superlattice identity, especially in intercalation compounds. Nevertheless, in this work, we find that kinetic control of superlattice growth leads to the coexistence of disparate crystallographic domains within a compositionally perfect single crystal. We demonstrate that Cr1/4TaS2 is a noncollinear antiferromagnet in which scattering between majority and minority superlattice domains engenders complex magnetotransport below the Néel temperature, including an anomalous Hall effect. We characterize the magnetic phases in different domains, image their nanoscale morphology, and propose a mechanism for nucleation and growth using a suite of experimental probes coupled with first-principles calculations and symmetry analysis. These results provide a blueprint for the deliberate engineering of macroscopic transport responses via microscopic tuning of magnetic exchange interactions in superlattice domains.

Xie, Lilia S↗

3D Quantum Anomalous Hall Effect in Magnetic Topological Insulator Trilayers of Hundred‐Nanometer Thickness

Magnetic topological states refer to a class of exotic phases in magnetic materials with the non-trivial topological property determined by magnetic spin configurations. An example of such states is the quantum anomalous Hall (QAH) state, which is a zero magnetic field manifestation of the quantum Hall effect. Current research in this direction focuses on QAH insulators with a thickness of less than 10 nm. Here, molecular beam epitaxy (MBE) is employed to synthesize magnetic TI trilayers with a thickness of up to ≈106 nm. It is found that these samples exhibit well-quantized Hall resistance and vanishing longitudinal resistance at zero magnetic field. By varying the magnetic dopants, gate voltages, temperature, and external magnetic fields, the properties of these thick QAH insulators are examined and the robustness of the 3D QAH effect is demonstrated. The realization of the well-quantized 3D QAH effect indicates that the nonchiral side surface states of the thick magnetic TI trilayers are gapped and thus do not affect the QAH quantization. The 3D QAH insulators of hundred-nanometer thickness provide a promising platform for the exploration of fundamental physics, including axion physics and image magnetic monopole, and the advancement of electronic and spintronic devices to circumvent Moore's law.

36 MATERIALS SCIENCE↗

Gauge theory of giant phonon magnetic moment in doped Dirac semimetals

Here, we develop a quantitative theory of phonon magnetic moment in doped Dirac semimetals. Our theory is based on an emergent gauge field approach to the electron-phonon coupling, applicable to gapless systems. We find that the magnetic moment is directly proportional to the electrical Hall conductivity through the phonon Hall viscosity. Our theory is combined with the first-principles calculations, allowing us to quantitatively implement it to realistic materials. Magnetic moments are found to be of the order of a Bohr magneton for Raman-active phonon modes in graphene and Cd 3 ⁢As 2 . Our results provide practical guidance for the dynamical generation of large magnetization in quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetism in Moiré Materials

This project focused on the theory of the electronic properties of magnetic moire materials. Moire materials can be formed by overlaying two or more two-dimensional crystals that are either semiconductors or semimetals and establishing a moire pattern. Low-energy electronic properties are then described by a continuum model with crystalline periodicity. Moire materials are therefore artificial two-dimensional crys- tals whose periodicity is at the tens of nanometers scale, increasing the unit cell area by a factor of about 10,000 compared to real crystals. They are important because the main tuning knob of chemistry, the number of electrons per effective atom or molecule (the analog of the number of electrons per unit cell in real crystals), can be shifted by more than one simply by using electrical gates. The research covered two diffeerent classes of moire materials, graphene multilayers twisted to a rotation angle at which correlations are strong, and transition metal dichalcogenide semiconductors. The proposal identifed one project in each area both related very broadly to magnetism: i) Advancing understanding of broken spin-valley and sublattice symmetries in Magic Angle Twisted Bilayer Graphene and ii) Developing the theory of itinerant electron magnetism in Gamma-valley and K-valley transition metal dichalcogenide moire materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗