Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Life Cycle Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

An Evaluation of the Applicability of Damage Tolerance to Dynamic Systems

The Federal Aviation Administration, the National Aeronautics and Space Administration and the aircraft industry have teamed together to develop methods and guidance for the safe life-cycle management of dynamic systems. Based on the success of the United States Air Force damage tolerance initiative for airframe structure, a crack growth based damage tolerance approach is being examined for implementation into the design and management of dynamic systems. However, dynamic systems accumulate millions of vibratory cycles per flight hour, more than 12,000 times faster than an airframe system. If a detectable crack develops in a dynamic system, the time to failure is extremely short, less than 100 flight hours in most cases, leaving little room for error in the material characterization, life cycle analysis, nondestructive inspection and maintenance processes. In this paper, the authors review the damage tolerant design process focusing on uncertainties that affect dynamic systems and evaluate the applicability of damage tolerance on dynamic systems.

Forth, Scott C.↗

Flex-Capsules for the Roman Space Telescope High Gain Antenna Gimbal

The Cable Wrap mechanism has been traditionally used for feeding power and telemetry through each gimbal actuator exiting at the gimbal output flange. Such a mechanism had often utilized round wire bundles or a multitude of single insulated conductors woven together flatwise to handle the angular rotation. Though flexible printed circuit board (PCB) is not a new technology, it was decided to implement it for the Roman Space Telescope (RST) High Gain Antenna Gimbal in an effort to improve reliability with consistency of manufacture and to save mass and minimize required volume. This paper provides a description of what we term Flex-Capsule (a similar vendor flight development is termed Twist Capsule), discusses the reasoning behind choosing a new engineering development over maintaining heritage, and includes commentary pertaining to life cycle analysis, electrical performance, and flexible PCB lubrication. Lessons learned from the design, analysis, and test campaign are also included. The conclusion is that benefits of pursuing the Flex-Capsule over heritage Cable Wrap have been realized.

twist capsule↗

Flex-Capsule for the Roman Space Telescope High Gain Antenna Gimbal

The Cable Wrap mechanism has been traditionally used for feeding power and telemetry through each gimbal actuator exiting at the Gimbal output flange. Such a mechanism had often utilized round wire bundles, or a multitude of single insulated conductors woven together flatwise to handle the angular rotation. Though flexible printed circuit board (PCB) is not a new technology, it was decided to implement it for the Roman Space Telescope (RST) High Gain Antenna Gimbal in an effort to improve reliability with consistency of manufacture and to save mass and minimize required volume. This paper provides a description of what we term Flex-Capsule (a similar vendor flight development is termed Twist Capsule), discusses the reasoning behind choosing a new engineering development over maintaining heritage, and includes commentary pertaining to life cycle analysis, electrical performance, and flexible PCB lubrication. Lessons learned from the design, analysis, and test campaign are also included. The conclusion is that benefits of pursuing the Flex-Capsule over heritage Cable Wrap have been realized.

twist capsule↗

Climate-Energy Nexus

The 140-page published proceedings of the workshop include individual articles and PowerPoint slides for all workshop presentations. The proceedings also contain pertinent background information on the China-US Joint Research Center, partnering organizations, and workshop goals and objectives. Overall, the workshop increased the understanding of the impacts of climate change on energy use and renewable energy production as well as the complex relationships among land use, energy production, and ecological restoration. The workshop served as an international platform for scientists and students of different research backgrounds to develop a unified perspective on energy and climate relationships. Such understanding will benefit future cooperation between China and the US in mitigating global climate change. The workshop’s agenda, which is highly interdisciplinary, explored many potential opportunities for international collaboration in ecosystem management, climate modeling, greenhouse gas emissions, and bioenergy sustainability. International research groups have been suggested in the areas of genomes and biotechnology of energy plants, sustainable management of soil and water resources, carbon sequestration, and microbial processes for ecological cycles. The project has attracted considerable attention from institutes beyond the China-US Joint Research Center partners, and several of them (such as Institute of Qing-Tibet Plateau Research, Institute of Soil and Water Conservation, Institute of Applied Ecology, CAS) have expressed interest in joining the partnership. In addition, the workshop played a significant role in facilitating establishment of private-public partnerships between government and private bioenergy companies (such as L.R. Shugarts and Associates, Inc.), including seed providers (Blade Energy Crops, Thousand Oaks, CA), pilot demonstration projects at coal-producing cities (e.g., Huaibei, Anhui province, China), and the development of methodology for assessment of the sustainable production of biofuels (such as life-cycle analysis, sustainability metrics, and land-use policy). Establishment of two US-China scientific research networks in the area of bioenergy and environmental science is a significant result of the workshop.

09 BIOMASS FUELS↗

SkyMine Carbon Mineralization Pilot Project

This Topical Report addresses accomplishments achieved during Phase 2b of the SkyMine® Carbon Mineralization Pilot Project. The primary objectives of this project are to design, construct, and operate a system to capture CO2 from a slipstream of flue gas from a commercial coal-fired cement kiln, convert that CO2 to products having commercial value (i.e., beneficial use), show the economic viability of the CO2 capture and conversion process, and thereby advance the technology to the point of readiness for commercial scale demonstration and deployment. The overall process is carbon negative, resulting in mineralization of CO2 that would otherwise be released into the atmosphere. The project will also substantiate market opportunities for the technology by sales of chemicals into existing markets, and identify opportunities to improve technology performance and reduce costs at the commercial scale. The project is being conducted in two phases. The primary objectives of Phase 1 were to evaluate proven SkyMine® process chemistry for commercial pilot-scale operation and complete the preliminary design for the pilot plant to be built and operated in Phase 2, complete a NEPA evaluation, and develop a comprehensive carbon life cycle analysis. The objective of Phase 2b was to build the pilot plant to be operated and tested in Phase 2c.

Christenson, Norm↗

Decision Point 1 Topical Report

This Topical Report addresses accomplishments achieved during Phase 2a of the SkyMine® Carbon Mineralization Pilot Project. The primary objectives of this project are to design, construct, and operate a system to capture CO2 from a slipstream of flue gas from a commercial coal-fired cement kiln, convert that CO2 to products having commercial value (i.e., beneficial use), show the economic viability of the CO2 capture and conversion process, and thereby advance the technology to the point of readiness for commercial scale demonstration and proliferation. The overall process is carbon negative, resulting in mineralization of CO2 that would otherwise be released into the atmosphere. The project will also substantiate market opportunities for the technology by sales of chemicals into existing markets, and identify opportunities to improve technology performance and reduce costs at the commercial scale. The project is being conducted in two phases. The primary objectives of Phase 1 were to elaborate proven SkyMine® process chemistry to commercial pilot-scale operation and complete the preliminary design for the pilot plant to be built and operated in Phase 2, complete a NEPA evaluation, and develop a comprehensive carbon life cycle analysis. The objective of the current Phase (2a) is to complete the detailed design of the pilot plant to be built in Phase 2b.

Yablonsky, Al↗

Novel DDR Processing of Corn Stover Achieves High Monomeric Sugar Concentrations from Enzymatic Hydrolysis (230 g/L) and High Ethanol Concentration (10% v/v) During Fermentation

Distilling and purifying ethanol, butanol, and other products from second and later generation lignocellulosic biorefineries adds significant capital and operating cost for biofuels production. The energy costs associated with distillation affects plant gate and life cycle analysis costs. Lower titers in fermentation due to lower sugar concentrations from pretreatment increase both energy and production costs. In addition, higher titers decrease the volumes required for enzymatic hydrolysis and fermentation vessels. Therefore, increasing biofuels titers has been a research focus in renewable biofuels production for several decades. In this work, we achieved over 200 g/L of monomeric sugars after high solids enzymatic hydrolysis using the novel deacetylation and disc refining (DDR) process on corn stover. The high sugar concentrations and low chemical inhibitor concentrations from the DDR process allowed ethanol titers as high as 82 g/L in 22 hours, which translates into approximately 10 vol% ethanol. To our knowledge, this is the first time that 10 vol% ethanol in fermentation derived from corn stover without any sugar concentration or purification steps has been reported. Techno-economic analysis shows the higher titer ethanol achieved from the DDR process could significantly reduce the minimum ethanol selling price from cellulosic biomass.

09 BIOMASS FUELS↗

The Real Problem (Humans) and Some Potentially Effective Alternatives and New Tools

The presentation offers a wider perspective, where on the example of Everglades’ restoration efforts, the real problem – humans – is exposed. Some potentially effective alternatives and new tools are offered and discussed. Everglades’s problems are primarily caused to human activity, whether these are related to poor water quality, land use changes or cheap short-sighted fixes. Ground rules need to be set in order to have a real discussion and seek real solutions to such problems. The difference between facts and opinions is explained, so is the difference between interests and positions. These terms are often partly coinciding in human minds, thus causing further misunderstandings in pursuing real solutions. Some confounding factors in the Everglades restoration efforts are listed, with one of the main examples being the assignment of a monetary value to all factors. Some of these factors are priceless, but not being valued easily and properly (such as water). The proposed alternative to monetary value is assigning energy as the unit of measurement. The two main methods for such alternate approach are (1) Embodied energy (Emergy) and (2) Life Cycle Analysis. Agriculturally-based ecosystems services are different from natural ecosystems services. Pursuing agriculturally-based ecosystems services (such as e.g. water storage on farms, reducing nutrients in water, using flood-tolerant crops cultivars, etc.) can develop eco-services into agricultural operations and systems, addressing everyone’s interest and benefiting the society.

09 BIOMASS FUELS↗

Carbon balance of CO2-EOR for NCNO classification

The question of whether carbon dioxide enhanced oil recovery (CO2-EOR) constitutes a valid alternative for greenhouse gas emission reduction has been frequently asked by the general public and environmental sectors. Through this technology, operational since 1972, oil production is enhanced by injecting CO2 into depleted oil reservoirs in order displace the residual oil toward production wells in a solvent/miscible process. For decades, the CO2 utilized for EOR has been most commonly sourced from natural CO2 accumulations. More recently, a few projects have emerged where anthropogenic CO2 (A-CO2) is captured at an industrial facility, transported to a depleted oil field, and utilized for EOR. If carbon geologic storage is one of the project objectives, all the CO2 injected into the oil field for EOR could technically be stored in the formation. Even though the CO2 is being prevented from entering the atmosphere, and permanently stored away in a secured geologic formation, a question arises as to whether the total CO2 volumes stored in order to produce the incremental oil through EOR are larger than the CO2 emitted throughout the entire CO2-EOR process, including the capture facility, the EOR site, and the refining and burning of the end product. We intend to answer some of these questions through a DOE-NETL funded study titled “Carbon Life Cycle Analysis of CO2-EOR for Net Carbon Negative Oil (NCNO) Classification”. NCNO is defined as oil whose carbon emissions to the atmosphere, when burned or otherwise used, are less than the amount of carbon permanently stored in the reservoir in order to produce the oil. In this paper, we focus on the EOR site in what is referred to as a gate-to-gate system, but are inclusive of the burning of the refined product, as this end member is explicitly stated in the definition of NCNO. Finally, we use Cranfield, Mississippi, as a case study and come to the conclusion that the incremental oil produced is net carbon negative.

54 ENVIRONMENTAL SCIENCES↗

The National Energy Technology Laboratory’s New Unit Process Template Design - LCAXIX

This work was presented at the American Center for Life Cycle Assessment 2019 Conference (LCAXIX) in Tucson, AZ on September 25, 2019. The National Energy Technology Laboratory (NETL) maintains a large unit process (UP) library which holds all documentation for each unit process created by the NETL Life Cycle Analysis (LCA) team. Each NETL unit process includes a Microsoft Excel spreadsheet containing calculations and an accompanying PDF, which thoroughly documents the calculations, parameters, and underlying reasoning and assumptions contained in the Excel file. However, as more and larger public data sources become available, the NETL LCA team has incorporated more data science techniques into their unit process development. NETL is demonstrating a new template which will allow for more flexible and advanced calculation and documentation methods. The new template will support NETL’s dedication to transparency by continuing to provide all information necessary to replicate the UPs.

Krynock, Michelle↗

U.S. DOE Special Session: National Energy Technology Laboratory LCA Update - LCAXIX

This work was presented at the American Center for Life Cycle Assessment 2019 Conference (LCAXIX) in Tucson, AZ on September 24, 2019. The evaluation of the environmental advantages and disadvantages of energy technology and policy options requires the comparison of those options on a common basis, and as such, it needs to include not only obvious impacts like converting fuel to useful energy via combustion, but of infrastructure construction, extraction, processing and transportation of fuels, and transport of the final energy product to an end user. Further, it requires comparison across multiple categories of impacts, as single metric perspectives can miss important cross-media tradeoffs. At the Department of Energy’s National Energy Technology Laboratory, life cycle analysis is used as a tool and framework for undertaking a broad range of these types of evaluations. This overview will describe the LCA process at NETL.

Source record↗

BETO 2021 Peer Review - Waste Carbon Gas Upgrading via Acetogens 2.3.2.106

Waste carbon gas represents a large and diverse set of feedstocks that could be captured and turned into useful products. This includes waste gas emitted from industrial activity, syngas from burned plant biomass or processed municipal waste, and electrochemical reduction of CO2. Currently, carbon gas is being microbially converted to ethanol as a main product. However, ethanol is a lower value product with a limited market size. While these microbes can make other higher value products, there are no commercial processes for generating these other products, leaving a gap in understanding potential implementation for commercialization. Expanding the products microbially produced from waste carbon gas requires several steps before commercial implementation. We are studying the acetogen Clostridium ljungdahlii as a biocatalyst to convert waste carbon gas to the chemical 3-hydroxybutyrate (3HB), a plastic monomer and fuel precursor. For that, we are studying and engineering microbial characteristics for novel 3HB product formation from waste gas streams. This includes metabolic characterization, genetic engineering, gas fermentation scaling, as well as technoeconomic and life cycle analysis.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Recycling and Life Cycle Issues for Lightweight Vehicles

This chapter addresses recycling and life cycle considerations related to the growing use of lightweight materials in vehicles. This chapter first addresses the benefit of a life cycle perspective in materials choice, and the role that recycling plays in reducing energy inputs and environmental impacts in a vehicle’s life cycle. Some limitations of life cycle analysis and results of several vehicle- and fleet-level assessments are drawn from published studies. With emphasis on lightweight materials such as aluminum, magnesium, and polymer composites, the status of the existing recycling infrastructure and technological challenges being faced by the industry also are discussed.

Das, Sujit↗

U.S. DOE/NETL LCA of LNG: Overview & Key (LCA) Challenges

Mr. Timothy Skone provided the opening session presentation at the LNGnet Special Working Group 2: "Managing methane emissions across the LNG value chain" meeting held on virtually on July 1, 2021. The presentation provides a brief overview of NETL life cycle analysis (LCA) modeling of U.S. natural gas production and liquefied natural gas (LNG) exports to European and Asian markets. The talk focuses on challenges in conducting LCAs of LNG shipments.

Source record↗

U.S. DOE Special Session: National Energy Technology Laboratory LCA Update

This work was presented at the American Center for Life Cycle Assessment 2022 Virtual Conference on November 8, 2022. The evaluation of the environmental advantages and disadvantages of energy technology and policy options requires the comparison of those options on a common basis, and as such, it needs to include not only obvious impacts like converting fuel to useful energy via combustion, but of infrastructure construction, extraction, processing and transportation of fuels, and transport of the final energy product to an end user. Further, it requires comparison across multiple categories of impacts, as single metric perspectives can miss important cross-media tradeoffs. At the Department of Energy’s National Energy Technology Laboratory, life cycle analysis is used as a tool and framework for undertaking a broad range of these types of evaluations. This overview will describe the NETL LCA work over the past year.

Jamieson, Matthew↗