Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Decoupling Accurate Electrochemical Behaviors for High-Capacity Electrodes via Reviving Three-Electrode Vehicles

Developing high-capacity electrodes requires the evaluation of electrochemical behaviors with an increasing current density. Currently, the current density for evaluation of high-capacity electrodes has reached a new stage where the polarization at the lithium counter electrode has become a technical barrier for the accurate evaluation of battery electrodes, resulting in severe performance and mechanism mischaracterizations. Here, the accurate electrochemical behavior for high-capacity electrodes via a single-channel three-electrode vehicle is decoupled, by which the impact of lithium counter electrode is minimized. The testing high-capacity graphite electrode is capable of delivering an excellent rate capability with 81.7% capacity retention at 0.3 C, as well as stable cycling performance retaining 97.5% practical reversible capacity after 225 cycles, much higher than the graphite electrode tested with traditional half-cell testing vehicle but in close agreement with the results obtained from a well-matched full cell, reflecting accurate electrochemical performance evaluations of high-capacity electrodes. Moreover, detailed electrochemical mechanisms of impedance and diffusion properties for working electrodes are also successfully decoupled individually. Here, this work uncovers the mismatch between traditional evaluation configuration and increasing testing current density and provides a guideline for accurate electrochemical evaluation for ever-increasing high-capacity electrodes, which is of great significance for high-energy lithium or other alkali-metal ion batteries.

25 ENERGY STORAGE↗

Effects of penta‐coordinated Al 3+ sites and Ni defective sites on Ni/ Al 2 O 3 for CO methanation

Abstract Engineering sophisticated structure of Al 2 O 3 and controlling the structure of counterpart metal active sites remain challenges to achieve a high catalytic‐performance in heterogeneous catalysis. Herein, we present a confinement strategy to stabilize homogeneous Ni by penta‐coordinated Al 3+ anchoring sites in Al 2 O 3 . This approach is involved in using a metal–organic framework as host to load Ni 2+ ions, by the aim of producing a confined Ni/Al 2 O 3 catalyst after a standard calcination. Metal–support interaction between Ni and Al 2 O 3 was tailored to be medium to avoid the formation of inactive NiAl 2 O 4 , which favors the generation of more available Ni active sites accessible to the reactants. The resultant Ni/Al 2 O 3 exhibited superior catalytic performance in comparison with the control Ni/Al 2 O 3 in CO methanation owing to the presence of defective sites on sufficient Ni 0 surface. Furthermore, the presence of oxygen vacancies on Al 2 O 3 and hydrogen spillover contributed toward excellent coke resistance properties in the reaction.

Engineering↗

Brain phosphoproteomic analysis identifies diabetes‐related substrates in Alzheimer's disease pathology in older adults

INTRODUCTION: Type 2 diabetes increases the risk of Alzheimer's disease (AD) dementia. Insulin signaling dysfunction exacerbates tau protein phosphorylation, a hallmark of AD pathology. However, the comprehensive impact of diabetes on patterns of AD-related phosphoprotein in the human brain remains underexplored. METHODS: We performed tandem mass tag–based phosphoproteome profiling in post mortem human brain prefrontal cortex samples from 191 deceased older adults with and without diabetes and pathologic AD. RESULTS: Among 7874 quantified phosphosites, microtubule-associated protein tau (MAPT) phosphorylated at T529 and T534 (isoform 8 T212 and T217) were more abundant in AD and showed differential associations with diabetes. Network analysis of co-abundance patterns uncovered synergistic interactions between AD and diabetes, with one module exhibiting higher MAPT phosphorylation (15 MAPT phosphosites) and another displaying lower MAP1B phosphorylation (22 MAP1B phosphosites). DISCUSSION: This study offers phosphoproteomics insights into AD in diabetes, shedding light on mechanisms that can inform the development of therapeutics for dementia. Highlights: The risk of Alzheimer's disease (AD) dementia is increased among older adults living with diabetes. The patterns of AD-related phosphoprotein in the human brain in older adults are differential among older adults living with diabetes. Microtubule-associated protein tau phosphorylated at T529 and T534 (isoform 8 T212 and T217) showed differential associations with diabetes. Phosphosite co-abundance networks of synergistic interactions between AD and diabetes were identified.

60 APPLIED LIFE SCIENCES↗

Orographic enhancement of rainfall over the Congo Basin

Abstract The Congo rainforest located in central equatorial Africa is an important, yet understudied part of the globe surrounded by complex orographic features. A primitive understanding of precipitation processes such as mesoscale convective dynamics magnifies uncertainties in the future climate projections of the hydrological cycle over the Congo. Furthermore, the effects of orography, which is an important forcing for convection and precipitation, are poorly resolved by climate models, and ill‐conceptualized over the Congo. To address this knowledge gap, perturbed orographic forcing experiments are conducted using the Weather Research and Forecasting (WRF) mesoscale numerical model in a high‐resolution convection‐permitting model setup. The model simulated selected dates in November 2014. The thunderstorms and rainfall simulated in the control run for the case study analyzed in this article compared reasonably well to satellite‐derived brightness temperature and rainfall data. The results from this case study show that the dynamical impact of increasing the height of the East African Highlands is the blocking of the lower‐tropospheric tropical easterlies. This weakening of the lower‐tropospheric zonal winds increases the windshear over the Congo Basin resulting in slower propagating, more intense mesoscale convective systems with enhanced rainfall.

54 ENVIRONMENTAL SCIENCES↗

Ionic‐Liquid Free and Flexible Transistors Made of 2D Material Inks

The development of thin-film transistors (TFTs) using 2D materials is crucial for enabling scalable, low-cost, and flexible electronics. Currently, 2D TFTs with the highest performance have been achieved by using ionic-liquid gating (ILG), a technique suited for proof-of-concept studies. However, ILG suffers from slow switching speeds, temperature sensitivity, poor long-term stability, and integration challenges, making it unsuitable for practical use. Moreover, typical fabrication methods for 2D TFTs involve harsh conditions such as strong acids or high temperatures (>300 °C), limiting integration with flexible substrates. This work provides the first demonstration of an ILG-free, all-2D-material TFT fabricated onto a flexible substrate. Water-based graphene and hexagonal boron nitride (h-BN) inks are printed to deposit the electrodes and dielectric layers, respectively. The MoS 2 channel is produced via supramolecular interfacial self-assembly, yielding uniform, monolayer-rich films transferable to rigid and flexible substrates. The resulting TFTs operate below 3 V, exhibit negligible leakage current, and achieve field-effect mobilities up to 0.46 cm 2 V −1 s −1 (rising to 2.47 cm 2 V −1 s −1 with silver electrodes) measured under ambient conditions, while maintaining excellent mechanical flexibility. This work establishes a low-cost and scalable solution-processable platform for flexible electronics based on 2D materials that match requirements for practical applications.

2D materials↗

Liquid Exfoliation of Few-layer 1T-TaS{sub 2−x}Se{sub x} Superconductors

Atomic layer superconductors (ALSCs) have been applied in studying many quantum phenomena over the past ten years. However, self-standing ALSCs beyond the conventional substrates have not been developed yet except from mechanical exfoliation. We here report the successful synthesis of the freestanding unadulterated TaS{sub 2−x}Se{sub x} ALSCs via a simple liquid exfoliation method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Decreased Energy Gap and Enhanced Conductivity in Zn-Doped Sr{sub 2}IrO{sub 4}

The 5d transition metal oxide Sr{sub 2}IrO{sub 4} has attracted much interest in the high-temperature superconductivity community since it highly resembles the cuprate superconductor in crystal and electronic structures. Here, we report on the transport and magnetic properties of Zn-doped Sr{sub 2}IrO{sub 4}. It is found that the energy gap of Sr{sub 2}IrO{sub 4} is rapidly decreased with a small amount of Zn doping. Consequently, the electrical conductivity is significantly enhanced. The present work could serve as the prerequisite stage in exploring the possible superconductivity of the Sr{sub 2}IrO{sub 4} compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Research on evolution region of self-similar pulses in a dispersion-decreasing fiber

The relationship between the self-similar propagation region for single pulse and oscillation region for a pair of self-similar pulses are first investigated in our paper. By introducing self-similar coefficient F and RMS width ratio K, we find that self-similar propagation region starts from z = 1.8L{sub D} to z = 18L{sub D} while F ≤ 10%. The optimum output of self-similar pulse is also achieved when F and K reach a minimum value simultaneously at z = 3.5L{sub D}. The sinusoidal fit oscillation region of self-similar pulse pair ranges from 5/8L{sub D} to 2L{sub D} while F varies from 40.27 to 7.99%, and the dark soliton fit oscillation region ranges from 2L{sub D} to 6L{sub D} while F varies from 7.99 to 5.32%, indicating that the sinusoidal fit oscillation region almost occurs before the pulses enter the self-similar propagation region and the dark soliton fit oscillation region occurs within the self-similar pulse propagation region. Furthermore, the oscillation characteristics of interacting pulses are also studied numerically by using split-step Fourier method. The results are beneficial in Dense Wavelength Division Multiplexing transmission system which is in heavy demands of light source in wide-range wavelength.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sintering of Iron Ores in a Millipot in Comparison with Tablet Testing and Industrial Process

To explore the feasibility of small-scale sintering pot testing, a ‘millipot’ facility (diameter of 53 mm and height of 400 mm) was established and used to examine the sintering performance of iron ores and other non-traditional ferrous materials. The sintering performance of a millipot was examined across a range of different operational conditions (coke rate and suction pressure) and compared with an industrial sinter strand operation. Tablet tests were also performed to assist in the design of the millipot experiments and identify conditions for achieving mineral composition similar to the industrial sinter. For the millipot experiments, the materials used need to be compacted to increase the bulk density, and a higher coke rate is required to compensate the high heat loss caused by wall effects. A higher suction pressure is also necessary to maintain an oxidizing atmosphere in the sinter bed. As expected, it was not possible to eliminate the wall effect, which resulted in more primary hematite at edges of the sintered column. However, the sintered material from the center of column simulates industrial sinter reasonably well. As such, millipot provides a practical way to evaluate the sintering process and material performance at laboratory scale, helping to bridge the gap between tablet sintering and large scale pot sintering, or full scale plant trial. The results of millipot testing can be used for designing larger scale experiments or commercial sintering trials.

36 MATERIALS SCIENCE↗

Study on Microstructure and Properties of AZ31/6061 GTAW Butt Joints According to Mg-Cd-Al Ternary System

AZ31 Mg and 6061 Al were successfully joined by GTAW method with Cd as filler metal. The tensile strength of the joints reached 170 MPa through this alloying method according to Mg-Cd-Al ternary system. The microstructure, phases, element distribution and fracture mechanism of alloyed joints were studied. The results suggest that the fusion zone is mainly composed of CdMg compounds and Al-based solid solution. A transitional zone thickness of 40-80 μm with few primary Al{sub 12}Mg{sub 17} and fine Al{sub 12}Mg{sub 17}-MCMS (MCMS represents a mixture of CdMg and CdMg{sub 3} compounds) eutectic is formed between the AZ31 base metal and fusion zone. The fracture surface presents three distinct regions because of the different distribution of Al{sub 12}Mg{sub 17} compounds in the transitional zone. The alloying with Cd filler metal can disperse Al{sub 12}Mg{sub 17} intermetallic compounds and form CdMg ordered compounds with excellent plasticity. Thus, the mechanical properties of alloyed joints have been significantly enhanced.

36 MATERIALS SCIENCE↗

Chapter 9.12 - Weather, Climatic and Ecological Impacts of Onshore Wind Farms

Wind power is an environmentally sustainable technology that is likely to be part of the solution to the climate change, air pollution, and energy security problems. Despite many positive benefits, the rapid development of wind power has raised concerns about some potential adverse environmental impacts. While converting wind?s kinetic energy into electricity, wind turbines (WTs) modify properties of the atmospheric boundary layer (ABL) including the vertical profiles and surface-atmosphere exchanges of energy, momentum, mass, moisture, and trace gases. Given the current installed capacity and the projected installation worldwide, wind farms (WFs) are likely becoming a major driver of manmade land use change on Earth. Hence, understanding WT-atmosphere-surface interactions and assessing potential environmental impacts of WFs are of significant scientific, societal and economic importance. Here we review our progress in assessing potential impacts of onshore wind power on weather, climate and vegetation activity. A consensus is emerging based on observations and modeling studies that WFs cause a local to regional warming effect, particularly at nighttime, while the impacts on precipitation, wind patterns, crop yields and vegetation activity are uncertain. The warming effect results simply from vertical heat redistribution within the ABL due to turbine-enhanced vertical turbulent mixing in the wakes. At the global scale, with a substantial installation of WFs, mesoscale and climate models predicted large regional changes but small global impacts on temperature, while the impacts on precipitation, clouds, wind patterns and large-scale circulation have large uncertainties and are region specific and scale dependent. Despite increasing number of research efforts, our assessment of potential WF impacts is still very limited. Although the WF impacts are mostly local and limited to the near-surface ABL, this is the layer where we live and plants grow. Hence, more studies are needed to improve our understanding of WT-atmosphere-surface interactions and our capability to model and project the weather, climatic and ecological impacts of large WFs.

atmospheric boundary layer↗

Enzyme-linked immunosorbent assay for detection of organophosphorylated butyrylcholinesterase: A biomarker of exposure to organophosphate agents

A sandwich enzyme-linked immunosorbent assay (sELISA) is developed for detection of organophosphorylated butyrylcholinesterase (OP-BChE), a potential biomarker for human exposure to organophosphate insecticides and nerve agents. A pair of antibodies specific to OP-BChE adduct were identified through systematic screening of several anti BChE antibodies (anti-BChE) and anti-phosphoserine antibodies (anti-Pser) from different sources. The selected anti-BChE (set as capture antibody) antibodies recognize both phosphorylated and nonphosphorylated BChE. These antibodies can therefore be used to capture both BChE and OP-BChE from the sample matrices. The anti- Pser (set as detecting antibody) was used to recognize the OP moiety of OP-BChE adducts. With the combination of the selected antibody pair, several key parameters (such as the concentration of anti-BChE and anti-Pser, and the blocking agent) were optimized to enhance the sensitivity and selectivity of the sELISA. Under the optimal conditions, the sELISA has shown a wide linear range from 0.03 nM to 30 nM, with a detection limit of 0.03 nM. Furthermore, the sELISA was successfully applied to detect OP-BChE using in-vitro biological samples such as rat plasma spiked with OP-BChE with excellent adduct recovery (z>99 %). These results demonstrate that this novel approach holds great promise to develop an ELISA kit and offers a simple and cost-effective tool for screening/evaluating exposure to organophosphate insecticides and nerve agents.

60 APPLIED LIFE SCIENCES↗

Shear stress- and line length-dependent screw dislocation cross-slip in FCC Ni

Screw dislocation cross-slip is important in dynamic recovery of deformed metals. A mobile screw dislocation segment can cross slip to annihilate an immobile screw dislocation segment with opposite Burgers vector, leaving excess dislocations of one kind in a crystal. Previous studies have found that the cross-slip process depends on both the local stress state and dislocation line length, yet a quantitative study of the combined effects of these two factors has not been conducted. In this work, we employ both dynamic concurrent atomistic-continuum (CAC) [L. Xiong, G. Tucker, D.L. McDowell, Y. Chen, J. Mech. Phys. Solids 59 (2011) 160–177] and molecular dynamics simulations to explore the shear stress- and line length-dependent screw dislocation cross-slip in face-centered cubic Ni. It is demonstrated that the CAC approach can accurately describe the 3-D cross-slip process at a significantly reduced computational cost, as a complement to other numerical methods. In particular, we show that the Fleischer (FL) [R.L. Fleischer, Acta Metall. 7 (1959) 134–135] type cross-slip, in which a stair-rod dislocation is involved, can be simulated in the coarse-grained domain. Our simulations show that as the applied shear stress increases, the cross-slip mechanism changes from the Friedel-Escaig (FE) [B. Escaig, J. Phys. 29 (1968) 225–239] type to the FL type. In addition, the critical shear stress for both cross-slip mechanisms depends on the dislocation line length. Moreover, the cross-slip of a screw dislocation with a length of 6.47 nm analyzed using periodic boundary conditions occurs via only the FL mechanism, whereas a longer dislocation with length of 12.94 nm can cross-slip via either the FE or FL process in Ni subject to different shear stresses.

36 MATERIALS SCIENCE↗

Ballistic-diffusive phonon heat transport across grain boundaries

The propagation of a heat pulse in a single crystal and across grain boundaries (GBs) is simulated here using a concurrent atomistic-continuum method furnished with a coherent phonon pulse model. With a heat pulse constructed based on a Bose-Einstein distribution of phonons, this work has reproduced the phenomenon of phonon focusing in single and polycrystalline materials. Simulation results provide visual evidence that the propagation of a heat pulse in crystalline solids with or without GBs is partially ballistic and partially diffusive, i.e., there is a co-existence of ballistic and diffusive thermal transport, with the long-wavelength phonons traveling ballistically while the short-wavelength phonons scatter with each other and travel diffusively. To gain a quantitative understanding of GB thermal resistance, the kinetic energy transmitted across GBs is monitored on the fly and the time-dependent energy transmission for each specimen is measured; the contributions of coherent and incoherent phonon transport to the energy transmission are estimated. Simulation results reveal that the presence of GBs modifies the nature of thermal transport, with the coherent long-wavelength phonons dominating the heat conduction in materials with GBs. In addition, it is found that phonon-GB interactions can result in reconstruction of GBs.

36 MATERIALS SCIENCE↗