Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEAD OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Airborne observations reveal elevational gradient in tropical forest isoprene emissions

Terrestrial vegetation emits vast quantities of volatile organic compounds (VOCs) to he atmosphere1-3, which influence oxidants and aerosols leading to complex feedbacks on air quality and climate4-6. Isoprene dominates global non-methane VOC emissions with tropical regions contributing ~80% of global isoprene emissions2. Isoprene emission rates vary over several orders of magnitude for different plant species, and characterizing this immense biological chemodiversity is a challenge for estimating isoprene emission from tropical forests. Here we present the isoprene emission estimates from aircraft direct eddy covariance measurements over the pristine Amazon forest. We report isoprene emission rates that are 3 times higher than satellite top-down estimates and 35% higher than model predictions based on satellite land cover and vegetation specific emission factors (EFs). The results reveal strong correlations between observed isoprene emission rates and terrain elevations which are confirmed by similar correlations between satellite-derived isoprene emissions and terrain elevations. We propose that the elevational gradient in the Amazonian forest isoprene emission capacity is determined by plant species distributions and can explain a substantial degree of isoprene emission variability in tropical forests. Finally, we apply this approach over the central Amazon and use a model to demonstrate the impacts on regional air quality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructurally resolved electrochemical evolution of mechanical- and irradiation-induced damage in nuclear alloys

Abstract There is a need for high-throughput, scale-relevant, and direct electrochemical analysis to understand the corrosion behavior and sensitivity of nuclear materials that are exposed to extreme (high pressure, temperature, and radiation exposure) environments. We demonstrate the multi-scale, multi-modal application of scanning electrochemical cell microscopy (SECCM) to electrochemically profile corrosion alterations in nuclear alloys in a microstructurally resolved manner. Particularly, we identify that both mechanically deformed and irradiated microstructures show reduced charge-transfer resistance that leads to accelerated oxidation. We highlight that the effects of mechanical deformation and irradiation are synergistic, and may in fact, superimpose each other, with implications including general-, galvanic-, and/or irradiation-activated stress-corrosion cracking. Taken together, we highlight the ability of non-destructive, electrochemical interrogations to ascertain how microstructural alterations result in changes in the corrosion tendency of a nuclear alloy: knowledge which has implications to rank, qualify and examine alloys for use in nuclear construction applications.

Chen, Xin↗

Enhanced Surface Photochemistry in Chloride-Nitrate Ion Mixtures

Heterogeneous reactions of sea salt aerosol with various oxides of nitrogen lead to replacement of chloride ion by nitrate ion. Studies of the photochemistry of a model system were carried out using deliquesced mixtures of NaCl and NaNO₃ on a Teflon® substrate. Varying molar ratios of NaCl to NaNO₃ (1 : 9 Cl¯:NO₃¯, 1:1 Cl¯:NO₃¯, 3:1 Cl¯:NO₃¯, 9:1 Cl¯:NO₃¯) and NaNO₃ at the same total concentration were irradiated in air at 299 ∓ 3 K and at a relative humidity of 75 ∓ 8% using broadband UVB light (270–380 nm). Gaseous NO₂ production was measured as a function of time using a chemiluminescence NOy detector. Surprisingly, an enhanced yield of NO₂ was observed as the chloride to nitrate ratio increased. Molecular dynamics (MD) simulations show that as the Cl¯:NO₃¯ ratio increases, the nitrate ions are drawn closer to the interface due to the existence of a double layer of interfacial Cl¯ and subsurface Na+. This leads to a decreased solvent cage effect when the nitrate ion photodissociates to NO₂+O∙¯, increasing the effective quantum yield and hence the production of gaseous NO₂. The implications of enhanced NO₂ and likely OH production as sea salt aerosols become processed in the atmosphere are discussed.

54 ENVIRONMENTAL SCIENCES↗

Breathing and oscillating growth of solid-electrolyte-interphase upon electrochemical cycling

We report the first direct experimental evidence of the dynamic behavior of the solid-electrolyte-interphase (SEI) on copper electrodes upon electrochemical cycling. Synchrotron-based soft X-ray absorption spectroscopy (sXAS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS) consistently show that both the chemical composition and the thickness of the SEI change with electrochemical potential throughout the slow formation process. In particular, sXAS results show that the nascent carbonate species in SEI show redox reversibility and decompose during the delithiation (oxidation) process, which leads to a significant shrinking of the SEI thickness as confirmed by TOF-SIMS. Meanwhile, the carbonates also matures and become more and more inactive at every lithiation (reduction) process. These experimental observations reveal unambiguously that SEI formation is much more complicated than a simple and monotonous deposition of electrolyte decomposition product; instead, it could be an oscillating process with a breathing growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-temperature activation of methane on doped single atoms: descriptor and prediction

Catalytic transformation of methane under mild conditions remains a grand challenge. Fundamental understanding of C–H activation of methane is crucial for designing a catalyst for the utilization of methane at low temperature. Recent experiments show that strong methane chemisorption on oxides of precious metals leads to facile C–H activation. However, only a very few such oxides are capable (for example, IrO 2 and PdO). Here we show for the first time that strong methane chemisorption and facile C–H activation can be accomplished by single transition-metal atoms on TiO 2 , some of which are even better than IrO 2 . Using methane adsorption energy as a descriptor, we screened over 30 transition-metal single atoms doped on TiO 2 for the chemisorption of methane by replacing a surface Ti atom with a single atom of another transition metal. It is found that the adsorption energies of methane on a single atom of Pd, Rh, Os, Ir, and Pt doped on rutile TiO 2 (110) are greater than or similar to those on rutile IrO 2 (110), a benchmark for the chemisorption of methane on transition oxides. Electronic structure analysis uncovered orbital overlap and mixing between methane and the single atom, as well as significant localization of the charge between the molecule and the surface, demonstrating chemical bonding of CH 4 to doped single atoms. Facile C–H dissociation has been found on the single-atom sites with the transition state energies lower than desorption energies. We report our computational studies predict that Pd, Rh, Os, Ir, and Pt single atoms on rutile TiO 2 (110) can activate C–H of methane at a temperature lower than 25 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Significance of hydrogen bonding networks in the proton-coupled electron transfer reactions of photosystem II from a quantum-mechanics perspective

The photosynthetic protein complex, photosystem II (PSII), conducts the light-driven water-splitting reaction with unrivaled efficiency. Proton-coupled electron transfer (PCET) reactions at the redox-active tyrosine residues are thought to play a critical role in the water-splitting chemistry. Addressing the fundamental question as to why the tyrosine residue, Y Z , is kinetically competent in comparison with a symmetrically placed tyrosine residue, Y D , is important for the elucidation of the mechanism of PCET in the water-splitting reaction of PSII. Here, using all-quantum-mechanical calculations we study PCET at the Y Z and Y D residues of PSII. We find that when Y Z is in its protein matrix under physiological conditions, the HOMO of Y Z constitutes the HOMO of the whole system. In contrast, the HOMO of Y D is buried under the electronic states localized elsewhere in the protein matrix and PCET at YD requires the transfer of the phenolic proton, which elevates the HOMO of Y D to being the HOMO of the whole system. This leads to the oxidation of Y D albeit on a slower timescale. Our study reveals that the key differences in the electronic structure of Y Z and Y D is primarily determined by the protonation state of the respective hydrogen-bonding partners, D1-His190 and D2-His189, or more generally by the H-bonding network of the protein matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrolytic gold plating, stripping, and ion transport dynamics through a solid-state iodide perovskite

The pronounced electrochemical reactivity between halide perovskites and metal electrodes can introduce mobile extrinsic metal ions which can cause device instability or enable novel functionalities. Here we systematically investigate the kinetics of gold cation (Au + ) migration in indium tin oxide (ITO)/methylammonium lead triiodide (MAPbI 3 )/Au model devices under long-term potentiostatic biasing. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) analyses reveal that Au + ions, electrochemically generated at the Au anode, traverse the perovskite layer with diffusion coefficients on the order of 10 −11 to 10 −10 cm 2 s −1 and are subsequently reduced at the cathode as Au 0 clusters, resembling metal plating behavior in electrolytic cells and solid-state batteries during charging. Furthermore, reversing the applied bias strips the plated Au 0 , revealing reversibility suitable for bipolar resistive switching devices and providing direct evidence of the electrochemical and ionic nature of Au transport within the perovskite matrix. Quantitatively determining diffusion coefficients and ion concentrations provides foundational inputs for future drift-diffusion modelling opportunities and allows us to relate our findings to implications on long term operation of devices like photovoltaic modules. These results clearly demonstrate the solid-state electrochemical nature of perovskite devices, highlight methods to be more quantitative about ion transport properties, provide and emphasize the importance of disentangling electro-, photo-, photoelectrochemical processes for understanding device performance and unlocking new functionalities.

14 SOLAR ENERGY↗

The fate of the tert-butyl radical in low-temperature autoignition reactions

Alkyl combustion models depend on kinetic parameters derived from reliable experimental or theoretical energetics that are often unavailable for larger species. Here, we have performed a comprehensive investigation of the tert -butyl radical ( R • in this paper) autoignition pathways. CCSD(T)/ANO0 geometries and harmonic vibrational frequencies were obtained for key stationary points for the R • + O 2 and QOOH + O 2 mechanisms. Relative energies were computed to chemical accuracy (±1 kcal mol -1 ) via extrapolation of RCCSD(T) energies to the complete basis-set limit, or usage of RCCSD(T)-F12 methods. At 0 K, the minimum energy R • + O 2 pathway involves direct elimination of HO $^{•}_{2}$ (30.3 kcal mol -1 barrier) from the tert -butyl peroxy radical ( ROO • ) to give isobutene. This pathway lies well below the competing QOOH -forming intramolecular hydrogen abstraction pathway (36.2 kcal mol -1 barrier) and ROO • dissociation (35.9 kcal mol -1 barrier). The most favorable decomposition channel for QOOH radicals leads to isobutene oxide (12.0 kcal mol -1 barrier) over isobutene (18.6 kcal mol -1 barrier). For the QOOH + O 2 pathways, we studied the transition states and initial products along three pathways: (1) α -hydrogen abstraction (42.0 kcal mol -1 barrier), (2) γ -hydrogen abstraction (27.0 kcal mol -1 barrier), and (3) hydrogen transfer to the peroxy moiety (24.4 kcal mol -1 barrier). The barrier is an extensive modification to the previous 18.7 kcal mol -1 value and warrants further study. However, it is still likely that the lowest energy QOOH + O 2 pathway corresponds to pathway (3). We found significant spin contamination and/or multireference character in multiple stationary points, especially for transition states stemming from QOOH . Lastly, we provide evidence for an $\tilde{A} - \tilde{X}$ surface crossing at a C s -symmetric, intramolecular hydrogen abstraction structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the characteristics of N-polar GaN Schottky barrier contacts with LPCVD SiN interlayers

In this work, we study the behavior of N-polar GaN Schottky diodes with low-pressure chemical vapor deposited (LPCVD) SiN interlayers and unveil the important role of an amphoteric miniband formed in this interlayer due to a previously identified and dominating Si dangling bond defect. Through analysis of temperature-dependent current–voltage (I–V–T), capacitance–voltage (C–V), and x-ray photoelectron spectroscopy measurements, we observe that when nickel is deposited on LPCVD SiN pretreated with hydrofluoric acid, the SiN/GaN interface is responsible for determining the overall system's barrier height. By contrast, contact formation on oxidized LPCVD SiN leads to a metal/SiN-dominant barrier. We, consequently, propose band diagrams that account for an amphoteric miniband in LPCVD SiN, leading to a new understanding of LPCVD SiN as a lossy dielectric with surface barrier-dependent behavior.

42 ENGINEERING↗

COMPARATIVE SPECTRA OF OXYGEN-RICH VERSUS CARBON-RICH CIRCUMSTELLAR SHELLS: VY CANIS MAJORIS AND IRC +10216 AT 215-285 GHz

A sensitive (1{sigma} rms at 1 MHz resolution {approx}3 mK) 1 mm spectral line survey (214.5-285.5 GHz) of VY Canis Majoris (VY CMa) and IRC +10216 has been conducted to compare the chemistries of oxygen- and carbon-rich circumstellar envelopes. This study was carried out using the Submillimeter Telescope of the Arizona Radio Observatory with a new Atacama Large Millimeter Array type receiver. This survey is the first to chemically characterize an O-rich circumstellar shell at millimeter wavelengths. In VY CMa, 128 emission features were detected arising from 18 different molecules; and in IRC +10216, 720 lines were observed, assigned to 32 different species. The 1 mm spectrum of VY CMa is dominated by SO{sub 2} and SiS; in IRC +10216, C{sub 4}H and SiC{sub 2} are the most recurrent species. Ten molecules were common to both sources: CO, SiS, SiO, CS, CN, HCN, HNC, NaCl, PN, and HCO{sup +}. Sulfur plays an important role in VY CMa, but saturated/unsaturated carbon dominates the molecular content of IRC +10216, producing CH{sub 2}NH, for example. Although the molecular complexity of IRC +10216 is greater, VY CMa supports a unique 'inorganic' chemistry leading to the oxides PO, AlO, and AlOH. Only diatomic and triatomic compounds were observed in VY CMa, while species with four or more atoms are common in IRC +10216, reflecting carbon's ability to form multiple strong bonds, unlike oxygen. In VY CMa, a new water maser (v {sub 2} = 2) has been found, as well as vibrationally excited NaCl. Toward IRC +10216, vibrationally excited CCH was detected for the first time.

79 ASTRONOMY AND ASTROPHYSICS↗

Light stress and photoprotection in Chlamydomonas reinhardtii

Summary Plants and algae require light for photosynthesis, but absorption of too much light can lead to photo‐oxidative damage to the photosynthetic apparatus and sustained decreases in the efficiency and rate of photosynthesis (photoinhibition). Light stress can adversely affect growth and viability, necessitating that photosynthetic organisms acclimate to different environmental conditions in order to alleviate the detrimental effects of excess light. The model unicellular green alga, Chlamydomonas reinhardtii , employs diverse strategies of regulation and photoprotection to avoid, minimize, and repair photo‐oxidative damage in stressful light conditions, allowing for acclimation to different and changing environments.

Erickson, Erika↗

Comparative study on passivation of GaAs{sub 0.86}P{sub 0.14}/Al{sub 0.6}Ga{sub 0.4}As near-surface quantum well

The authors report a comparative study on ex situ passivation of a near-surface GaAs{sub 0.86}P{sub 0.14}/Al{sub 0.6}Ga{sub 0.4}As quantum well using various sulfide solutions and nitrogen plasma treatments. The built-in surface electric field is changed via band bending by applying various surface passivation conditions. The band bending is measured using x-ray photoelectron spectroscopy. Reduction in surface electric field in the range of 10-35 kV/cm is observed depending on different passivation conditions. The photoreflectance spectra show enhancement in intensity and blueshift of {approx}3 meV accompanied by significant reduction in the broadening parameter of the observed e{sub 1}-lh{sub 1} transitions. Among all the methods studied here, passivation by Na{sub 2}S{center_dot}xH{sub 2}O is found to be most effective as it removes the native oxide layer completely leading to almost flat band condition.

36 MATERIALS SCIENCE↗

Observation of N-rich solid-electrolyte interphase by ToF-SIMS.

Formation of a stable solid electrolyte interphase (SEI) between lithium electrodes and electrolyte upon multiple charge/discharge cycles is crucial to a long-term lithium-ion battery performance. Addition of LiNO3 to lithium bis (fluorosulfonyl) imide/poly(ethylene oxide) (LiFSI/PEO) electrolyte leads to a durable SEI that is electrically insulating yet highly conductive to Li ions, chemically and electrochemically stable, physically uniform, and mechanically robust. ToF-SIMS was used here in combination with sputtering by a gaseous cluster ion beam (GCIB) to examine how the addition of a small proportion of LiNO3 to the LiFSI/PEO electrolyte affects the SEI composition. Negative ion ToF-SIMS spectra of the cycled samples display an intense m/z 26 peak associated with the SEI. Exact mass assignments and isotopic ratios indicate that this peak should be assigned as (CN-)-C-12, with little to no negative secondary ion signal arising from (LiF-)-Li-7. This CN- signal appears to arise from an N-rich portion of the SEI adjacent to the Li electrode that is depleted in LiF relative to the bulk electrolyte. The dearth of LiF- (and LiF+ from the positive ion spectra) is unexpected because LiF has been identified in the SEI in similar samples. Finally, GCIB sputtering indicates that the SEI adheres more strongly to the Li electrode than to the LiFSI/PEO electrolyte.

Shavandi, Seyedeh Reyhaneh↗

Oxidation Behavior of Zirconium Diboride Nanoparticles

The products of oxidation of ZrB{sub 2} powders with average particle sizes of ~100 and ~30 nm by atmospheric oxygen under isothermal conditions and during heating have been characterized by thermal analysis, X-ray diffraction, scanning electron microscopy, IR frustrated total internal reflection spectroscopy, energy dispersive X-ray analysis, and elemental analysis. The oxidation onset has been observed at 594 and 396°C, respectively. Oxidation at temperatures of ≥800°C leads to the formation of boron oxide and monoclinic ZrO{sub 2}, independent of the particle size of ZrB{sub 2}. The reaction rate constants for the oxidation of ZrB{sub 2} nanoparticles ~100 and ~30 nm in size have been determined to be 0.03, 0.15, and 0.31 h{sup –1} at 600, 650, and 700°C and 0.11, 0.35, and 0.81 h{sup –1} at 500, 600, and 700°C, respectively. The apparent activation energies for the oxidation of the ZrB{sub 2} nanoparticles ~100 and ~30 nm in size are 161 ± 4 and 62 ± 3 kJ/mol, respectively, as evaluated from the temperature dependence of the rate constants at the above temperatures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermodynamic analysis of the W-Al{sub 2}O{sub 3} system near the melting temperature of Al{sub 2}O{sub 3}: II. Chemical interactions at 1 x 10{sup -5} bar

The W-Al{sub 2}O{sub 3} system is considered at a basic component ratio of 1: 1. The composition and component concentrations in the closed system under isobaric-isothermal conditions and a residual pressure of 1 x 10{sup -5} bar are determined by stochastic simulation and the minimization of the Gibbs free energy. The basic chemical reactions leading to tungsten oxidation near the Al{sub 2}O{sub 3} melting temperature are determined, and the possibilities of their occurrence are calculated. Understanding the behavior of the system under these conditions allows one to stabilize the conditions for growing leucosapphire crystals from melt.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-Capacity P2-Type Na x Li 0.25 Mn 0.75 O 2 Cathode Enabled by Anionic Oxygen Redox

Sodium-ion battery technology has attracted significant attention due to its substantial cost advantage and similar operating mechanism to Li-ion batteries. P2-type sodium manganese oxide cathode is one of the most promising candidates, demonstrating both high capacity and good cycling stability. Here, we explore the lattice oxygen activity in layered sodium transition metal oxides. We synthesize a series of sodium lithium manganese oxides, NaxLi 0.25 Mn 0.75 O2 (x = 0.75 – 0.833), to optimize Na content. We further investigate the charge compensation mechanism for the best performing Na 0.75 Li 0.25 Mn 0.75 O 2 over an extensive electrochemical cycling window. The large charge and discharge capacity is enabled by reversible lattice oxygen redox in the high voltage region (≥2.5 V), along with Mn redox at the voltages below 2.5 V. Additionally, we reveal a small amount of oxygen gas evolution, 0.04% of the total oxygen in Na 0.25 Li 0.25 Mn 0.75 O 2 . This initial study will trigger an interest in the lattice oxygen activity in layered sodium metal oxide cathode, therefore, leading to better understanding of its correlation with crystal structure and electrochemical performance.

25 ENERGY STORAGE↗

Polymer Retention Evaluation in a Heavy Oil Sand for a Polymer Flooding Application on Alaska’s North Slope

For a polymer flooding field trial in a heavy oil reservoir on Alaska’s North Slope, polymer retention is a key parameter. Because of the economic impact of retention, this parameter was extensively studied using field core material and conditions. Several important findings were noted. Polymer retention based on effluent viscosity measurements can be overestimated unless the correct (non-linear) relation between polymer concentration and viscosity is used. Polymer degradation (either mechanical or oxidative) can also lead viscosity-based measurements to overestimate retention. Inaccessible pore volume (IAPV) can be overestimated if insufficient brine is flushed through the sand between polymer banks. Around 100 pore volumes (PV) of brine may be needed to displace mobile polymer to approach a true residual resistance factor and properly measure IAPV. Even for a sand pack with kwsor = 20 mD, IAPV was zero for HPAM with molecular weight (Mw) of 18 million g/mol. Fine-grain particles (<20 μm) strongly impacted polymer retention values. Native NB#1 sand with a significant component of particles <20 μm exhibited 290 μg/g, while the same sand exhibited 28 μg/g after these small particles were removed. Polymer retention did not necessarily correlate with mineral composition. The NB#1, NB#3, and OA sands had similar elemental and clay compositions, but the NB#1 sand exhibited ~10 times higher retention than the NB#3 sand. Polymer retention did not necessarily correlate with permeability. NB#1 sand exhibited much higher retention than OA sand, even though NB#1 sand was twice as permeable as OA sand. No evidence of chromatographic separation of HPAM molecular weights was found in our experiments. Although retention tended to be greater without a residual oil saturation (than at Sor), the effect was not strong. Aging a core (with high oil saturation) at 60°C reduced HPAM retention by a factor of two. As expected, under similar conditions, polymer retention was greater for a higher Mw HPAM (18 million g/mol) than for a lower Mw HPAM (10-12 million g/mol). In many cases with high polymer retention values (e.g., 240 μg/g), polymer arrival at the end of the core was relatively quick, but achieving the injected concentration occurred gradually over many pore volumes. This effect was not due chromatographic separation of polymer molecular weights. Results from modeling of this behavior was consistent with concentrationdependent polymer retention. The form assumed for the retention function in a simulator can have an important impact on the timing and magnitude of the oil response from a polymer flood. Field-based observations can underestimate polymer retention, depending on when the tracer and polymer concentrations were measured and the assumptions made about reservoir heterogeneity.

Wang, Dongmei↗

Measurement of radiolytic hydrogen generation and impact of drying treatments on reactor exposed and surrogate aluminum materials

Technical challenges associated with dry storage of Aluminum-clad Spent Nuclear Fuel (ASNF) include a need to better understand the potential extent of gaseous molecular hydrogen (H 2 ) production through radiolytic degradation of the aluminum (oxy)hydroxide films present on ASNF. The characterization of radiolytic gas generation from ASNF (oxy)hydroxide layers has been identified as a key knowledge gap which poses a technical challenge to the long-term storage of ASNF. Task 2 of the action plan for the extended (>50 years) dry storage of ASNF addresses this gap. Previous radiolysis studies performed under Task 2 established baseline estimates of H 2 generation rates from the attendant hydrated oxides. The results confirmed that net radiolytic H 2 production has a dependency on absorbed gamma dose, as well as relative humidity and cover gas composition (air, nitrogen, and argon). Further experiments revealed that the physisorbed water on the samples may significantly impact the radiolytic H 2 yield. This phenomenon complicates the determination of H 2 generation rates for hydrated oxides, which may lead to inaccurate modeling predictions of the long-term H 2 yields in sealed storage systems containing ASNF, particularly when compared to spent fuel casks which have undergone some drying process intended to remove physically- and chemically-bound water. This report describes the testing methods utilized and the hydrogen generation results obtained in an investigation of the effects of gamma irradiation on aluminum materials for a variety of (oxy)hydroxide surface compositions and drying conditions. The testing methods included small-area aluminum material testing in ampules, and large-area aluminum material testing in steel vessels. Test material preparation, irradiation, and radiolytic H 2 measurement methods are summarized. The measured H 2 concentrations, which reflect the variable initial hydrated inventory and drying treatments, are compared to one another as well as to previously published data, to identify the primary factors affecting radiolytic H 2 generation rates and potential equilibrium H 2 concentrations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗