Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Iterative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

A general algorithm for the solution of Kepler's equation for elliptic orbits

An efficient algorithm is presented for the solution of Kepler's equation f(E)=E-M-e sin E=0, where e is the eccentricity, M the mean anomaly and E the eccentric anomaly. This algorithm is based on simple initial approximations that are cubics in M, and an iterative scheme that is a slight generalization of the Newton-Raphson method. Extensive testing of this algorithm has been performed on the UNIVAC 1108 computer. Solutions for 20,000 pairs of values of e and M show that for single precision, 42.0% of the cases require one iteration, 57.8% two and 0.2% three. For double precision one additional iteration is required.

Ng, E. W.↗

A preliminary study of relaxation methods for the inviscid conservative gasdynamics equations using flux splitting

Plus minus flux vector split schemes are combined with the multigrid relaxation method to obtain fast rates of iterative (or steady state) convergence. On model nonlifting biconvex airfoil flow, steady state convergence is obtained using multigrid in 40 iteractions for subsonic cases and in 120 iterations for transonic cases. A 65 x 33 stretched grid is used. However, the multigrid scheme used here (and there are numerous variations) sometimes could not be made to work for transonic cases with a large number of supersonic points. Moreover, the multigrid method is only several times faster than the conventional algorithm which itself could perhaps be accelerated by other means. Nethertheless, with proper adjustment the multigrid method will ultimately lead to very fast rates of iterative convergence.

Steger, J. L.↗

Self-adaptive predictor-corrector algorithm for static nonlinear structural analysis

A multiphase selfadaptive predictor corrector type algorithm was developed. This algorithm enables the solution of highly nonlinear structural responses including kinematic, kinetic and material effects as well as pro/post buckling behavior. The strategy involves three main phases: (1) the use of a warpable hyperelliptic constraint surface which serves to upperbound dependent iterate excursions during successive incremental Newton Ramphson (INR) type iterations; (20 uses an energy constraint to scale the generation of successive iterates so as to maintain the appropriate form of local convergence behavior; (3) the use of quality of convergence checks which enable various self adaptive modifications of the algorithmic structure when necessary. The restructuring is achieved by tightening various conditioning parameters as well as switch to different algorithmic levels to improve the convergence process. The capabilities of the procedure to handle various types of static nonlinear structural behavior are illustrated.

Padovan, J.↗

The solution of variable-step implicit difference equations for dynamic systems analysis

A semi-implicit iterative technique is given for the solution of implicit matrix difference equations which arise in variable-step direct time integration of dynamic systems equations. For all practical purposes, the technique avoids repeated refactoring of the stepsize-dependent solution matrix and achieves the solution convergence for engineering accuracy requirements within a permissible number of iterations. Extension of the present method to nonlinear problems treated by the pseudo-force procedure is straightforward. For nonlinear solution procedures based on the tangent modulus formulation, the technique requires modification to make use of the tangent stiffness matrix. It is noted that the question of whether to include the nonlinear terms within the iteration loop has not yet been resolved.

Park, K. C.↗

Experimental and finite element study of a standing torus under normal and tangential loads

The effect of a combined external load consisting of a normal component and a tangential braking force applied to an inflated torus is addressed. Experimental results obtained by photographic study of the contact area between the torus and load plate are presented as well as measurements of the vertical and horizontal displacement of the torus under load. A numerical procedure for displacement analysis is developed in which the finite element program STAGS (Structural Analysis of General Shells) is used in an iterative manner to produce a flat, horizontal footprint surface under force loading. The redistributed force distribution obtained by the iterative process is displayed along with computed meridional and circumferential stresses. Finally, an extension of the iterative method is introduced which eliminates the need to experimentally determine the footprint area.

Flugrad, D. R.↗

Convergence characteristics of nonlinear vortex-lattice methods for configuration aerodynamics

Nonlinear panel methods have no proof for the existence and uniqueness of their solutions. The convergence characteristics of an iterative, nonlinear vortex-lattice method are, therefore, carefully investigated. The effects of several parameters, including (1) the surface-paneling method, (2) an integration method of the trajectories of the wake vortices, (3) vortex-grid refinement, and (4) the initial conditions for the first iteration on the computed aerodynamic coefficients and on the flow-field details are presented. The convergence of the iterative-solution procedure is usually rapid. The solution converges with grid refinement to a constant value, but the final value is not unique and varies with the wing surface-paneling and wake-discretization methods within some range in the vicinity of the experimental result.

Seginer, A.↗

Subsonic panel method for designing wing surfaces from pressure distribution

An iterative method has been developed for designing wing section contours corresponding to a prescribed subcritical distribution of pressure. The calculations are initialized by using a surface panel method to analyze a baseline wing or wing-fuselage configuration. A first-order expansion to the baseline panel method equations is then used to calculate a matrix containing the partial derivative of potential at each control point with respect to each unknown geometry parameter. In every iteration cycle, the matrix is used both to calculate the geometry perturbation and to analyze the perturbed geometry. The distribution of potential on the perturbed geometry is established by simple linear extrapolation from the baseline solution. The extrapolated potential is converted to pressure by Bernoulli's equation. Not only is the accuracy of the approach good for very large perturbations, but the computing cost of each complete iteration cycle is substantially less than one analysis solution by a conventional panel method.

Bristow, D. R.↗

Computer program for solving laminar, transitional, or turbulent compressible boundary-layer equations for two-dimensional and axisymmetric flow

A numerical algorithm and computer program are presented for solving the laminar, transitional, or turbulent two dimensional or axisymmetric compressible boundary-layer equations for perfect-gas flows. The governing equations are solved by an iterative three-point implicit finite-difference procedure. The software, program VGBLP, is a modification of the approach presented in NASA TR R-368 and NASA TM X-2458, respectively. The major modifications are: (1) replacement of the fourth-order Runge-Kutta integration technique with a finite-difference procedure for numerically solving the equations required to initiate the parabolic marching procedure; (2) introduction of the Blottner variable-grid scheme; (3) implementation of an iteration scheme allowing the coupled system of equations to be converged to a specified accuracy level; and (4) inclusion of an iteration scheme for variable-entropy calculations. These modifications to the approach presented in NASA TR R-368 and NASA TM X-2458 yield a software package with high computational efficiency and flexibility. Turbulence-closure options include either two-layer eddy-viscosity or mixing-length models. Eddy conductivity is modeled as a function of eddy viscosity through a static turbulent Prandtl number formulation. Several options are provided for specifying the static turbulent Prandtl number. The transitional boundary layer is treated through a streamwise intermittency function which modifies the turbulence-closure model. This model is based on the probability distribution of turbulent spots and ranges from zero to unity for laminar and turbulent flow, respectively. Several test cases are presented as guides for potential users of the software.

Harris, J. E.↗

A new approach to optimization for aerodynamic applications

A new approach to solving optimization problems that involve nonlinear partial differential equations is presented. The approach eliminates the need for an inner-outer iterative procedure, solving the partial differential equation only once, thereby reducing the cost of computation to an extent which would allow its use as a practical tool in optimization problems. The approach is tested on a single design parameter problem through the use of a specially developed scheme. The results indicate comparable convergence properties for the present iterative process and the standard iterative scheme. The presented ideas are also applicable to multidesign parameter problems.

Rizk, M. H.↗

Parallel solution of finite element equations

The paper examines several parallel processing solution algorithms for finite element equations arising in linear equilibrium problems. Two basic groups of algorithms, direct and iterative, are investigated with respect to a number of parallel computer architectures and associated selection criteria. The direct algorithms include: LR-Gauss, Crout, Cholesky, Cyclic Reduction and WZ-factorization. The iterative methods examined are: Accelerated Gauss-Seidel, Surrogate Stiffness, Jacobi, Series Expansion, and Energy Monte Carlo. For real-time applications, where the object is to minimize the execution time, Cyclic Reduction appears to be best suited. This assumes a computer with an unlimited number of parallel processors. However, for computers with a limited number of parallel processors that must be used efficiently, both Gauss factorization and Jacobi-like iterative methods rank favorably.

Salama, M.↗

Convergence characteristics of nonlinear vortex-lattice methods for configuration aerodynamics

Nonlinear panel methods have no proof for the existence and uniqueness of their solutions. The convergence characteristics of an iterative, nonlinear vortex-lattice method are, therefore, carefully investigated. The effects of several parameters, including 1) the surface-paneling method, 2) the integration method of the trajectories of the wake vortices, 3) vortex-grid refinement , and 4) the initial conditions for the first iteration on the computed aerodynamic coefficients and on the flow field details are presented. The convergence of the iterative-solution procedure is usually rapid. The solution converges with grid refinement to a constant value, but the final value is not unique and varies with the wing surface-paneling and wake-discretization methods within some range in the vicinity of the experimental result.

Seginer, A.↗

Computational technique for three-dimensional compressible flow past wings at high angles of attack

A computational technique, based on the integral solution of the full potential equation, has been developed for the solution of three-dimensional high-subsonic flows past wings at high angles of attack. The problem includes two sources of nonlinearities: a boundary oriented nonlinearity (separated flow roll up) and a region oriented nonlinearity (flow compressibility). The former is represented by a nonlinear vortex lattice while the latter is represented by a source distribution inside a finite volume. The solution is obtained by using double iteration cycles; a separated flow (wake) iteration cycle and a compressibility iteration cycle. The computational technique is applied to a delta wing. The results show that the technique is very promising and efficient.

Kandil, O. A.↗

Conjugate gradient coupled with multigrid for an indefinite problem

An iterative algorithm for the Helmholtz equation is presented. This scheme was based on the preconditioned conjugate gradient method for the normal equations. The preconditioning is one cycle of a multigrid method for the discrete Laplacian. The smoothing algorithm is red-black Gauss-Seidel and is constructed so it is a symmetric operator. The total number of iterations needed by the algorithm is independent of h. By varying the number of grids, the number of iterations depends only weakly on k when k(3)h(2) is constant. Comparisons with a SSOR preconditioner are presented.

Gozani, J.↗

Free vibration analysis of coupled fluid-structure systems

An efficient numerical technique for the eigenvalue solution in the free vibration analysis of compressible fluid-structure coupled systems is presented. The fluid is assumed to be compressible in nature and the incompressible problem is only a special case of the present generalized algorithm. A natural frequency analysis of the structure in the absence of any fluid is achieved by a combined Sturm sequence and inverse iteration technique that computes only the required eigenvalues and vectors. A special inverse iteration scheme is then developed for the coupled system that uses the computed eigenvalues as starting iteration values for convergence. Numerical results obtained by solving a number of standard test cases indicate the pattern of root convergence corresponding to various simplifying assumptions.

Gupta, K. K.↗

Computation of three-dimensional viscous flows using a space-marching method

A space-marching method, developed to compute three-dimensional flows for internal geometries, has been utilized to predict viscous flows through a curved duct and over a swept wing. The Navier-Stokes equations have been posed as an initial value problem by neglecting the streamwise viscous diffusion terms and by treating the pressure gradient as a known source term. The resulting equations have been solved by a non-iterative (single pass) algorithm at each streamwise step. The results are compared with earlier computations (based on iterative methods) and the experimental data. The agreement between the present predictions, the experimental data, and the earlier predictions is good for the cases computed. The computation time is only a fraction of the iterative methods.

Murthy, K. N. S.↗

Finite element calculation of buoyancy-driven convection near a melt/solid phase boundary

Two iterative schemes based on the mixed finite element method are developed for analyzing steady natural convection in a melt adjacent to its solid phase. The simplest method decouples the calculation of the field variables and the shape of the melt/solid interface into two interlocked iterations that are performed successively. The second method uses Newton's iteration to solve simultaneously for both types of unknowns and has a quadratic convergence rate. Results for a model problem of melt and solid in a cylindrical ampoule show the Newton algorithm to be a factor of three more efficient.

Chang, C. J.↗

Exploiting parallel computing with limited program changes using a network of microcomputers

Network computing and multiprocessor computers are two discernible trends in parallel processing. The computational behavior of an iterative distributed process in which some subtasks are completed later than others because of an imbalance in computational requirements is of significant interest. The effects of asynchronus processing was studied. A small existing program was converted to perform finite element analysis by distributing substructure analysis over a network of four Apple IIe microcomputers connected to a shared disk, simulating a parallel computer. The substructure analysis uses an iterative, fully stressed, structural resizing procedure. A framework of beams divided into three substructures is used as the finite element model. The effects of asynchronous processing on the convergence of the design variables are determined by not resizing particular substructures on various iterations.

Rogers, J. L., Jr.↗

A parabolized Navier-Stokes algorithm for separated supersonic internal flows

A stable global-iteration procedure is applied to a fully implicit noniterative parabolized Navier-Stokes algorithm to improve the solutions of the single-sweep method as well as to resolve small separation bubbles due to shock-wave/boundary-layer interactions. A modified form of the FLARE approximation is employed in the separated regions and some requirements for stable iterations are discussed. The results of the global-iteration scheme for two test cases of supersonic internal flows are compared against the results of the single-sweep method as well as the results of the full Navier-Stokes solver.

Chitsomboon, T.↗