SEARCH · Engineering Papers

Results for “INFRARED SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Kinematic properties of the neutral gas outflow from comet P/Halley

High-resolution infrared spectra of H2O in Comet Halley, obtained by the Kuiper Airborne Observatory, were used to characterize the dynamics of the neutral gas outflow from the comet. The spatial distribution and the expansion velocity of the H2O molecules were deduced from the positions, widths, and shapes of the H2O lines. The character of line profiles suggested that the H2O distribution was anisotropic in the circular field-of-view of aproximately 10,000 radius centered on the nucleus. Direct observations of the H2O spatial brightness distribution showed that the outflow was concentrated in the sunward direction (although some H2O emission was also detected in the tail). An obvious property of the gas outflow from the Comet P/Halley was its variability. The specific intensities of the H2O lines demonstrated that the gas production from the comet varied significantly on many time scales; there were pre- and postperihelion asymmetries, day-to-day variations, and outbursts.

Larson, H. P.↗

NASA NTRS1988

Cometary dust composition

The earth based measurements and in situ sampling of Comet Halley have provided new data about the chemical composition of cometary grains. Recent progress in laboratory studies of interplanetary dust particles (IDPs) complement the comet data, allowing inferences about the mineralogy and physical structure of the comet dust to be drawn from the observed elemental composition and infrared spectra. The in situ dust composition measurements at Halley, the composition of IDPs and their relation to comet dust, and the origin of the 3.4 micron hydrocarbon feature is discussed. Related discussion is also presented on aromatic components in comets and the 3.4 micron feature. These topics are briefly summarized.

Gehrz, R. D.↗

NASA NTRS1988

Properties of interstellar dust in reflection nebulae

Observations of interstellar dust in reflection nebulae are the closest analog in the interstellar medium to studies of cometary dust in our solar system. The presence of a bright star near the reflection nebula dust provides the opportunity to study both the reflection and emission characteristics of interstellar dust. At 0.1 to 1 micrometer, the reflection nebula emission is due to starlight scattered by dust. The albedo and scattering phase function of the dust is determined from observations of the scattered light. At 50 to 200 micrometers, thermal emission from the dust in equilibrium with the stellar radiation field is observed. The derived dust temperature determines the relative values of the absorption coefficient of the dust at wavelengths where the stellar energy is absorbed and at far infrared wavelengths where the absorbed energy is reradiated. These emission mechanisms directly relate to those seen in the near and mid infrared spectra of comets. In a reflection nebula the dust is observed at much larger distances from the star than in our solar system, so that the equilibrium dust temperature is 50 K rather than 300 K. Thus, in reflection nebulae, thermal emission from dust is emitted at 50 to 200 micrometer.

Sellgren, Kristin↗

NASA NTRS1988

Chemistry of chlorinated species in the Antarctic stratosphere

The chemistry of Cl sub 2 O sub 2, the chlorine monoxide dimer, has been further investigated in order to better asses its potential role in catalytic ozone destruction cycles. The dimer has been generated in a flow system, in the 200 to 250 K temperature range, by using ozone and chlorine atoms as ClO precursors. The Cl-atoms are produced by a microwave discharge of either Cl sub 2, or of F sub 2 with subsequent addition of HCl. With this later scheme the dimer can be generated in the absence of Cl sub 2. The Fourier transform infrared spectra of the products clearly indicates the presence of two isomers, in agreement with earlier results (J. Phys. Shen., 91, 433, 1987). None of the observed IR bands can be attributed to a ClO-OClO adduct, since they all appear in the absence of any detectable amount of OCl. It is likely that the particles in the polar stratospheric clouds will have a relatively dilute nitric acid outer layer, even if the core is the nitric acid monohydrate, since the particles are in equilibrium with the ambient water vapor, which is present at levels of a few parts per million.

Molina, Mario J.↗

NASA NTRS1988

Hot components and circumstellar grains in M supergiant syncretic binaries

Ultraviolet and infrared spectra were obtained in order to study grains in cool star and hot star syncretic type binaries. Grains are found in only about half of the syncretic systems. The results suggest that grains have not formed in many syncretic systems because of ultraviolet radiation from the hot star. Circumstellar extinction could not be unambiguously detected in those systems with grains.

Buss, Richard H., Jr.↗

NASA NTRS1988

In situ composite cure monitoring using infrared transmitting optical fibers

The development of infrared-transmitting optical fibers as sensors for monitoring the cure of advanced composite materials is reported. Fourier transform infrared spectra are presented which were remotely sensed during the cure of a high performance polyimide resin and a graphite/polyimide matrix prepreg using an 0.1 mm O.D. x 3 m chalcogenide optical fiber. A discussion of the fiber and sensor element, absorption mechanism and potential applications is presented.

Young, Philip R.↗

NASA NTRS1989

Remote sensing and geologic studies of localized dark mantle deposits on the moon

Localized lunar dark mantle deposits (LDMD) are small, smooth low-albedo units of pyroclastic origin commonly found associated with endogenic source craters. Analysis of near-infrared spectra, multispectral images, and radar data obtained for 25 LDMD has led to the identification of three compositional groups of LDMD. Group 1 deposits are composed predominantly of highlands-rich wall rock but also contain a substantial juvenile component, Group 2 deposits are composed largely of mare plug rock material, while Group 3 deposits are rich in a mixture of olivine and pyroxene. Variations in eruption conditions are interpreted to be largely responsible for the varying mineralogy of these three types of deposits.

Hawke, B. R.↗

NASA NTRS1989

Bayesian learning

In 1983 and 1984, the Infrared Astronomical Satellite (IRAS) detected 5,425 stellar objects and measured their infrared spectra. In 1987 a program called AUTOCLASS used Bayesian inference methods to discover the classes present in these data and determine the most probable class of each object, revealing unknown phenomena in astronomy. AUTOCLASS has rekindled the old debate on the suitability of Bayesian methods, which are computationally intensive, interpret probabilities as plausibility measures rather than frequencies, and appear to depend on a subjective assessment of the probability of a hypothesis before the data were collected. Modern statistical methods have, however, recently been shown to also depend on subjective elements. These debates bring into question the whole tradition of scientific objectivity and offer scientists a new way to take responsibility for their findings and conclusions.

Denning, Peter J.↗

NASA NTRS1989

Characterization of the surfaces of platinum/tin oxide based catalysts by Fourier transform spectroscopy (FTIR)

The Laser Atmospheric Wind Sounder (LAWS) Program has as one of its goals the development of a satellite based carbon dioxide laser for making wind velocity measurements. The specifications for this laser include the requirement that the laser operate at a repetition rate of 10 Hertz continuously for three years. Earth-based carbon dioxide lasers can operate for only a short time on a single charge of gas because the lasing action causes the CO2 to break down into CO and O2. Therefore, earth-based CO2 lasers are generally operated in a flow through mode in which the spent gas is continually exhausted and fresh gas is continually added. For a satellite based system, however, a recirculation system is desired because it is not practical to send up extra tanks of CO2. A catalyst which could enable a recirculating CO2 laser to function continuously for three years needs to be developed. In the development of a catalyst system there are many variables. Obviously, not all possible formulations can be tested for three years, therefore, an accurate model which is based on the reaction mechanism is needed. The construction of a multistep reaction mechanism is similar to the construction of a jigsaw puzzle. Different techniques each supply a piece of the puzzle and the researcher must put the pieces together. Transmission infrared spectroscopy was shown to be very useful in supplying some of the information needed to elucidate reaction mechanisms. The purpose was to see what kind of information might be obtained about the NASA catalyst using infrared absorption spectroscopy. Approximately 200 infrared spectra of the prototype Pt/tin oxide catalyst and its precursor components are observed under a variety of different conditions. The most significant observations are summarized.

Keiser, Joseph T.↗

NASA NTRS1990

Space station contamination study: Assessment of contaminant spectral brightness

The results presented show that spectral emissions which arise as a result of vehicle-ambient atmospheric interactions are significant and can become competitive with the natural zodiacal background up to altitudes as high as 400 km for the Vacuun Ultraviolet (VUV) and Visible Infrared Spectra (VIS) for the worst case conditions used. The empirical database on the induced environment of space vehicles is very sparse, and these results are based on a number of assumptions and cannot be regarded as definitive at the present time. Since the technique for doing calculations of this kind was developed in its preliminary form for the purpose of this study, a list of greatly improved estimates are provided of the contamination irradiances. Tasks which are considered most important in order to achieve a higher confidence level for the preliminary conclusions drawn are provided.

Torr, D. G.↗

NASA NTRS1989

Fitting improved accretion disk models to the multiwavelength continua of quasars and active galactic nuclei

Fits to the ultraviolet-optical-infrared spectra of 60 quasars and active galactic nuclei (AGNs) are investigated, using black hole accretion disk models. The disk is assumed to be geometrically thin and optically thick. The observed spectrum from a black hole accretion disk, rotating (Kerr) or nonrotating (Schwarzschild), is transformed by the geometric inclination effect, Doppler shifts, gravitational redshifts, and gravitational focusing. These effects alter the locally emitted fluxes and produce harder spectra for an observer at higher inclination angles. The relativistic corrections are much more significant in the Kerr geometry since the inner edge of the disk is much closer to the rotating black hole. A simple inverse relation between the inferred black hole mass and the assumed inclination angle was found in the Kerr case, while the inferred accretion rate (solar masses/yr) remains independent of the angle. In the Schwarzschild case, the ratio of the inferred accretion rate to the black hole mass remains roughly constant when the viewing angle changes. In both geometries, low-redshift Seyfert galaxies have relatively low accretion rates, only a few percent of their Eddington luminosities, while the most luminous quasars are accreting near their Eddington limits.

Sun, Wei-Hsin↗

NASA NTRS1989

High-resolution near-infrared spectroscopy of water dimer

High-resolution near-infrared spectra are reported for all of the O-H stretch vibrational bands of the water dimer. The four O-H vibrations are characterized as essentially independent proton-donor or proton-acceptor motions. In addition to the rotational and vibrational information contained in these spectra, details are obtained concerning the internal tunneling dynamics in both the ground and excited vibrational states. These results show that, for tunneling motions which involve the interchange of the proton donor and acceptor molecules, the associated frequencies decrease substantially due to vibrational excitation. The predissociation lifetimes for the various states of the dimer are determined from linewidth measurements. These results clearly show that the predissociation dynamics is strongly dependent on the tunneling states, as well as the Ka quantum number, indicating that the internal tunneling dynamics plays an important role in determining the dissociation rate in this complex.

Huang, Z. S.↗

NASA NTRS1990

Molten (Mg0.88Fe0.12)2SiO4 at lower mantle conditions - Melting products and structure of quenched glasses

Infrared spectra of quenched magnesium silicate glasses synthesized by fusing olivine at pressures in excess of 50 GPa and temperatures greater than 2500 K demonstrate that silicon is dominantly present in four-fold coordination with respect to oxygen within these quenched glasses. This low coordination is attributed, by analogy with the structural behavior of glasses compressed at 300 K, to the instability of higher coordinations in glasses of these compositions on decompression. Spectra of glasses formed in a hydrous environment document that water is extensively soluble in melts at these high pressures and temperatures. Also, these results are consistent with the melting of (Mg0.88Fe0.12)2SiO4 compositions to liquids near pyroxene in stoichiometry under these conditions, with iron-rich magnesiowuestite being the liquidus phase.

Williams, Quentin↗

NASA NTRS1990

Fourier transform infrared (FTIR) fiber optic monitoring of composites during cure in an autoclave

Real-time in situ monitoring of the chemical states of epoxy resins was investigated during cure in an autoclave using infrared evanescent spectroscopy. Fiber evanescent sensors were developed which may be sandwiched between the plies of the prepreg sample. A short length of sapphire fiber was used as the sensor cell portion of the fiber probe. Heavy metal fluoride glass optical fiber cables were designed for connecting the FTIR spectrometer to the sensor fiber within the autoclave. The sapphire fibers have outstanding mechanical thermal properties which should permit their use as an embedded link in all thermoset composites. The system is capable of operation at a temperature of 250 C for periods up to 8 hours without major changes to the fiber transmission. A discussion of the selection of suitable sensor fibers, the construction of a fiber-optic interface, and the interpretation of in situ infrared spectra of the curing process is presented.

Druy, Mark A.↗

NASA NTRS1990

The effects of the space environment on two aramid materials

Two aramid fibers having closely related chemical structures were chosen for important roles in the first tether to be used to connect pairs of orbiting vehicles. The protective outer jackets of the tethers will consist of woven fibers of poly(m-phenylene isophthalamide), commercially available from du Pont as Nomex. A cylindrical sheath of woven Kevlar 29, whose principal constituent is poly(p-phenylene terephthalamide), will be the load-bearing component for the tethers. Orbiting tethers will be in a hostile environment in which short wavelength electromagnetic radiation and energetic charged particles degrade exposed organic materials. At lower orbiting altitudes atomic oxygen is an especially serious hazard. Studies on the effects of ultraviolet radiation and atomic oxygen on fibers and films of Kevlar and Nomex are in progress. In an experiment to simulate the effects of atomic oxygen in space, small tows of Kevlar and Nomex were mounted in a commercial ashing device filled with oxygen at low pressure. An RF discharge in the instrument dissociated the molecular oxygen producing a strongly oxidizing atmosphere containing O(3P)(sup 4). Erosion was measured in terms of mass loss. Kevlar films were exposed to UV radiation in an apparatus consisting of a small vacuum chamber, 23 cm in diameter, into which a mass spectrometer and a quartz window were incorporated. Samples were exposed under vacuum with a 1000 watt xenon-arc lamp. Volatile products could be monitored with the mass spectrometer during the exposures. Transmission infrared spectra were taken before and after exposure to monitor chemical changes in the films.

Kiefer, Richard L.↗

NASA NTRS1989

The nature of cometary dust as determined from infrared observations

The infrared measurements of comets, the compositional information available from interplanetary dust particles (IDPs), and the recent results of flybys to Comet Halley can help in restricting the nature and composition of cometary dust models (c.f., Proceedings of the 20th ESLAB Symposium on Exploration of Halley's Comet, 1986). Researchers tried to incorporate some of these results into a coherent model to account for the observed cometary infrared emission. The presence of 10 and 3.4 micron features in Comet Halley (c.f. Bregman et al. 1987; Wickramasinghe and Allen 1986) indicated the presence of at least two components in the grain material, namely silicates and some form of amorphous carbon. These two components could reside in separate grains or may be parts of composite particles. Both these cases have been considered (see Krishna Swamy el a. 1988a, 1988b). In the absence of refractive index data for cometary analogs, the authors used the optical constants of olivine-rich lunar material 12009.48 (Perry et al. 1972) for the infrared region and that of alpha:C-H film for amorphous carbon (angus et al. 1986). For the visible region, a value of m = 1.38-0.39i was used for the silicates, and values published by Arakawa et al. (1985) were used for the amorphous carbon. These materials should give a representative behavior of the expected results. The model results were compared to observational data. The strength of the 3.4 micron and 10 micron features relative to the adjacent continuum, as well as the slope of the continuum between 2500 and 1250 cm(exp -1) (4 to 8 microns), were used as criteria for comparison. Model calculations with alpha approx. equals -3.5, and also the size distribution function inferred for Comet Halley, with a mass fraction (X) of silicate to amorphous carbon grains of about 40 to 1 can fit the data. A good match is obtained for the infrared spectra of Comets Halley and West from a 40 to 1 mixture of silicate and amorphous carbon grains with a a(exp -3.5) size distribution function. The results are consistent with compositional constraints provided by interplanetary dust particles (IPDs) and Halley flyby data. The variation of grain temperature with heliocentric distance appears to account for the major changes observed in cometary spectra.

Swamy, K. S. Krishna↗

NASA NTRS1991

LDEF contaminants analysis data

Modification of surface texture for Ram Facing FEP Teflon on the Long Duration Exposure Facility (LDEF) satellite is documented. Photos of changes in surface texture if thermal blanket material with position on tray C-08 are presented. Infrared spectra and photographic documentation of molecular film deposits on LDEF surfaces by location is reported. Results of a survey of the functional groups and elemental composition of the brown film found widely distributed on the surface of LDEF is shown. A partial photographic catalog of LDEF particulate contaminants is included. A set of photos of particles collected or photographed in place on the surface of LDEF is shown. Particle counts and surface obscuration data for the LDEF satellite are reported. The surface data in tables and charts is presented for the LDEF satellite by location.

Crutcher, E. Russ↗

NASA NTRS1991

Organic contamination of LDEF

A brown stain of varying thickness was present on most of the exterior surface of the retrieved Long Duration Exposure Facility (LDEF). Tape lifts of Earth-end LDEF surfaces taken showed that the surface particle cleanliness immediately after retrieval was very good, but faint footprints of the tape strips on the tested surfaces indicated a very faint film was removed by the tape. Solvent wipes of these surfaces showed that the stain was not amenable to standard organic solvent removal. Infrared spectra of optical windows from tray E5 show that the organic film is hydrocarbon in composition, but is not similar to the oil that seeped from tray C12. Very dark and heavy deposits of the stain is present at openings and vents to the interior of LDEF. Heavy brown and blue-green deposits are present in the interior of LDEF where sunlight penetrated through cracks and vent openings. The exterior of LDEF had significant areas painted with a white polyurethane paint for thermal control, and almost all of the interior was painted with a black polyurethane paint. Brown staining is consistent with outgassing of hydrocarbons from these paints by rapid solar UV induced polymerization of the outgassed hydrocarbons when they hit sunlight exposed areas.

Harvey, Gale A.↗