Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydrogels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Water Remediation: PVA-Based Magnetic Gels as Efficient Devices to Heavy Metal Removal

Scientific and technological researches are devoted to obtain materials capable of retaining different kinds of pollutants, contributing to contamination solutions. In this context, hydrogels have emerged as great candidates because of their excellent absorption properties as well as good mechanical, thermal and chemical properties. More specifically, ferrogels (magnetic gels) present the extra advantage of being easily manipulated by a permanent magnet. Here, we present the results derived from the application of ferrogels as efficient tools to extract heavy metal pollutants from wastewater samples. The gels were prepared following the method of freezing and thawing of a polyvinyl alcohol aqueous solution with magnetic nanoparticles coated with polyacrylic acid. Ferrogels were fully characterized and their ability to retain Cu{sup 2+} and Cd{sup 2+}, as model heavy metals, was studied. Thus kinetics and mechanisms of adsorption were evaluated and modeled. The concentration of MNPs on the PVA matrix was key to improve the adsorption capability (approximately the double of retention is improved by the MNPs addition). The adsorption kinetics was determined as pseudo-second order model, whereas the Langmuir model was the most appropriate to explain the behavior of the gels. Finally reuse ability was evaluated to determine the real potential of these materials, the ferrogels demonstrated high efficiency up to about five cycles, retaining about 80–90% of their initial adsorption capability. All the results indicated that the materials are promising candidates able to compete with the commercial technology regarding to water remediation.

36 MATERIALS SCIENCE↗

Adsorption of Ammonium by Graphene Oxide-Based Composites Prepared by UV Irradiation and Using as Slow-Release Fertilizer

A novel sodium alginate-grafted poly(acrylic acid)/graphene oxide (NaAlg-g-PAA/GO) composite hydrogel was prepared via ultraviolet irradiation, and characterized by infrared spectroscopy spectrometer. X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. It was employed to adsorb NH{sub 4}{sup +} from aqueous solution and used as slow-release nitrogen fertilizers (SNFs). Result indicated that the adsorption process for NH{sub 4}{sup +} reached equilibrium within 50 min, with the adsorption capacity of 6.6 mmol g{sup −1} even if 30 wt% GO was incorporated. The results of adsorption kinetic and isotherm were well described by the pseudo-second-order and Freundlich model. The thermodynamics analysis showed the adsorption process was spontaneous. The study indicated excellent water-holding ratio of soil with 2 wt% SNFs was 81.2%, and nitrogen release was up to 55.1% within 40 days in soil. Overall, NaAlg-g-PAA/GO could be considered as an efficient adsorbent for the recovery of nitrogen with the agronomic reuse as a fertilizer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and Characterization of a Novel pH-Sensitive Aluminum Crosslinked Carboxymethyl Tragacanth Beads for Extended and Enteric Drug Delivery

Carboxymethyl tragacanth (CM-TG) with a DS of 1.2 was synthesized and characterized for drug delivery using diclofenac sodium as a model drug. The mixture of CM-TG and drug was ionically crosslinked using aluminum chloride to form drug-loaded beads. The concentrations of 10 and 20% w/w solution of CM-TG were found to produce beads with acceptable qualities. The beads exhibited pH-dependent swelling. The highest swelling was observed at pH 6.8 which evidences the possibility to release the drug in the colon. FT-IR and TGA confirmed carboxymethylation of tragacanth and the absence of drug-polymer interaction. The diclofenac sodium entrapment efficiency was 30–35% while the loading varies from 4.5 to 18% w/w based upon the drug-polymer ratio. The beads could extend the drug release up to 180 min at pH 6.8. The pH-responsive CM-TG hydrogel beads are biocompatible and could be exploited as a new excipient in developing enteric release formulations.

60 APPLIED LIFE SCIENCES↗

Environmentally Friendly Novel Maleated Poly(vinyl alcohol) Grafted 1, 4-Butanediol Modified with Biopolymer for Encapsulation of Capsaicin

Nowadays, hydrogels are widely used in many fields, for instance as biosensors, in tissue engineering and in agriculture due to their high swelling behavior in water and their softness. The objective of this work was to study the preparation and physical properties of maleated poly (vinyl alcohol) (PVAM)-graft-butanediol (BDO) (PVAM-graft-BDO) using K{sub 2}S{sub 2}O{sub 8} as an initiator. The highest grafting efficiency of 92% was found at 7:3 PVAM-graft-BDO. The swelling behavior of the PVAM-graft-BDO increased with an increasing BDO content. The highest swelling ratio of the PVAM-graft-BDO of 250% was found at 7:3 PVAM:BDO. Moreover, the maximum tensile strength of the PVAM-graft-BDO was observed at 9:1 PVAM:BDO. The elongation at break of the PVAM-graft-BDO was improved by the addition of natural rubber-graft-cassava starch (NS). The PVAM-graft-BDO was used as a polymer matrix for the encapsulation of capsaicin. The results showed that the rate of capsaicin release from the polymer matrix in a water medium was controlled by the BDO portion and the NS content. After use, it was easily degraded in natural soil.

36 MATERIALS SCIENCE↗

Synthesis and pharmacological activity of a silicon—zinc—boron-containing glycerohydrogel

A new pharmacologically active nanostructured silicon—zinc—boron-containing glycerohydrogel was synthesized by the sol—gel method using silicon, zinc, and boron glycerolates as biocompatible precursors. The hydrogel composition and structural features were investigated by transmission electron microscopy, powder X-ray diffraction, IR spectroscopy, atomic emission spectrometry, and elemental analysis; a structural model was proposed. It was found that the 3D framework of the gel is formed by the products of hydrolysis and subsequent (co)condensation of silicon- and boron-containing precursors. Meanwhile, the major part of zinc monoglycerolate does not undergo hydrolytic transformations during gelation, being present in the 3D framework cells as amorphous nano-sized particles. The dispersion medium of the gel is an aqueous glycerol solution of silicon and boron glycerolates, products of their hydrolytic transformations, and water-soluble products of hydrolytic transformations of zinc monoglycerolate. The silicon—zinc—boron gel is nontoxic and possesses wound-healing and antimicrobial activities; it can be considered as a nanostructured dispersed system promising for biomedical applications, which is prepared in a simple and cost-effective way without using catalysts or toxic organic solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Characterization of Zeolites for Anti-corrosion Application: The Effect of Precursor and Hydrothermal Treatment

Four different hydrothermal processes were used to synthesize NaX zeolites. The effect of the precursor, hydrothermal time and temperature on the zeolite structure was investigated in this research. The results of XRD and FESEM/EDX analysis indicated the key role of aluminum sources in the amorphous content and the structure of zeolite from non-zeolite sodium aluminum silicate hydrate to favorable NaX-faujasite. Moreover, the irregular shape of agglomerated hydrogel was changed from micro- to nano-zeolite structure via the hydrothermal process of different aluminum sources. It was found that the nano-zeolites could be formed by sodium aluminate source. In addition, the synthesized zeolite particles were examined as corrosion inhibitor reservoir, considering the effect of Si/Al ratio, particle size, and amorphous content. It was shown that there is a direct relation between crystallization and ion exchange capacity. Through monitoring the behavior of bare mild steel in sodium chloride solution containing zinc cations released from the zeolite particles, it was found that the nano-zeolite particles with low Si/Al ratio can offer the most effective corrosion inhibition.

36 MATERIALS SCIENCE↗

Mn- and N- doped carbon as promising catalysts for oxygen reduction reaction: Theoretical prediction and experimental validation

Development of platinum group metal (PGM)-free as well as iron-free electrocatalysts is imperative to achieve low-cost and long-term durability of polymer electrolyte membrane fuel cells. Here in this paper, we combined computational and experimental studies to investigate the mechanism, activity, and durability of Mn and N co-doped carbon (denoted as Mn-N-C) as promising catalysts for oxygen reduction reaction (ORR) in challenging acid medium. The first-principles density functional theory calculations predict that it is favorable for O 2 to be reduced into H 2 O via four-electron pathway on MnN 4 sites embedded in carbon layer. Using the reaction energies calculated from DFT, microkinetic analysis predicts that the MnN 4 sites could catalyze ORR with a half-wave potential only 60 mV lower than that of Pt (111) and 80 mV lower than that of the FeN 4 sites embedded in carbon layer, assuming the same density of active sites in the catalysts. Motivated by the computational prediction, we synthesized a Mn-N-C catalyst using a polymer (i.e., polyaniline-PANI) hydrogel precursors via a high temperature approach. Structural characterization indicates that atomically dispersed Mn sites coordinated with N are very likely formed in the catalyst. Electrochemical measurements show that the synthesized Mn-N-C catalyst can promote four-electron ORR with a catalytic activity in acids comparable to that of the Fe-N-C catalyst prepared using the same procedure. More importantly, the Mn-N-C catalyst exhibits superior potential cyclic stability, only losing 20 mV after 10000 cycles (0.6 to 1.0 V in O 2 saturated electrolyte). In comparison, the Fe-N-C catalyst would loss 80 mV after only 5000 cycles under the same testing conditions. Our computational and experimental results strongly suggest that the Mn and N co-doped carbon could be promising high-performance catalysts for ORR in acidic medium.

25 ENERGY STORAGE↗

Influence of side-chain length on long-term release kinetics from poly(2-oxazoline)-drug conjugate networks

Four drug-conjugated poly(2-alkyl-2-oxazoline) (PAOx) networks with different hydrophobicity were synthesized via copolymerization of either 2-methyl-, 2-ethyl-, 2-propyl- or 2-butyl-2-oxazoline with the functional monomer, 2-dec-9-enyl-2-oxazoline. The incorporation of a labile ester linkage between the polymer and the drug benazepril allowed for sustained drug release over periods of months with the release rates strongly depending on the hydrophobicity of the polymer pendant groups. Drug loading of 13 ± 2 wt% was used with 10 mol% crosslinking sites simply by tuning the thiol-ene stoichiometry. The networks exhibited negligible cell toxicity but cell repulsion was observed for hydrogels based on poly(2-methyl-2-oxazoline) and poly(2-ethyl-2-oxazoline) while those based on poly(2-n-propyl-2-oxazoline) and poly(2-n-butyl-2-oxaoline) showed cell adhesion. Furthermore, these results suggest that PAOx networks have great potential as drug delivery devices for long-lasting drug release applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural evolution during gelation of pea and whey proteins envisaged by time-resolved ultra-small-angle x-ray scattering (USAXS)

Hydrogels from plant proteins commonly exhibit inferior gel strength compared to those from dairy proteins partially due to their distinct gel networks. How protein aggregates to form such networks in response to heat remains largely unknown. In this work, pea (PPI) and whey (WPI) protein isolate gels were produced at the same protein content and similar heating/cooling rate. The process was monitored using rheology, microscopy and in situ ultra-small-angle x-ray scattering (USAXS). Rheology showed an initial decrease in G' and G'' in PPI followed by a steady increase when the temperature surpassed ~60 °C whereas a much higher temperature (~80 °C) was required for WPI, both using 2 °C/min heating rate. Microscopy showed a coarse and heterogenous network in PPI, whereas for WPI, the network was finer and more continuous. In both gels, nano-sized spherical or ellipsoidal particles were present as the basic constituents. USAXS found individual protein was dominant in PPI or WPI solution at temperature below 57 °C. Their proportions decreased together with appearance of aggregates with an average R g of 9–10 nm in PPI and 6–7 nm in WPI at higher temperature. The size of the aggregates changed slightly during further heating and cooling, but their proportions increased. Power law exponents revealed the aggregates were mass fractals for WPI and PPI gels, and they became more compact during heating. Our findings suggested formation of primary aggregates in protein gel networks is a more organized process and provided theoretical guidance for production of high protein food gels with desirable texture.

59 BASIC BIOLOGICAL SCIENCES↗

A Multi-Institutional Phase 2 Trial of High-Dose SAbR for Prostate Cancer Using Rectal Spacer

High-dose SABR for prostate cancer offers the radiobiologic potency of the most intensified radiation therapy regimens but was associated with >90% rates of ulceration of the anterior rectal wall on endoscopic assessment; this infrequently progressed to severe rectal toxicity in prior prospective series. A multi-institutional phase 2 prospective trial was conducted to assess whether placement of a perirectal hydrogel spacer would reduce acute periprostatic rectal ulcer events after high-dose (>40 Gy) SABR.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Usefulness of gel-casting method in the fabrication of nonstoichiometric CaZrO{sub 3}-based electrolytes for high temperature application

Hydrogels obtained from lower toxicity monomers of N-(hydroxymethyl)acrylamide and N,N'-methylenebisacrylamide were applied to form nonstoichiometric CaZrO{sub 3}-based electrolytes. A coprecipitation-calcination method with ((NH{sub 4}){sub 2}C{sub 2}O{sub 4}) in concentrated NH{sub 3} aqueous solution was used to synthesise CaZrO{sub 3} involving 51 mol.% CaO (CZ-51) powder. The gas-tight CaZrO{sub 3}-based rods were prepared by the gel-casting method with 45 vol.% suspension and then sintered at 1500 deg. C-2 h. It was found that in low oxygen partial pressure, the nonstoichiometric CaZrO{sub 3} obtained by gel-casting method were pure oxide ion conductors. These samples exhibited comparable electrical conductivity values to isostatically compressed pellets starting from the same powder. The results of experiments on thermochemical stability of CZ-51 gel-cast shapes at high temperatures in air or gas mixtures involving 2-50 vol.% H{sub 2}, as well as the corrosion resistance in exhaust gases from a self-ignition engine were also presented and discussed. The thermal resistance of CaZrO{sub 3} obtained rods against molten nickel or iron was also examined. Based upon these investigations, it is evident that only in hydrogen-rich gas atmospheres can the stability of CaZrO{sub 3} shapes be limited due to the presence of CaO precipitation as a second phase. The nonstoichiometric CaZrO{sub 3} (CZ-51) gel-cast materials were also tested in solid galvanic cells, designed to study thermodynamic properties of oxide materials, important for SOFC and energy technology devices. In this way, the Gibbs energy of NiM{sub 2}O{sub 4}, M = Cr, Fe, at 650-1000 deg. C was determined. The CaZrO{sub 3} involving 51 mol.% CaO gel-cast sintered shapes seems to be promising solid electrolytes for electrochemical oxygen probes in control of metal processing and thermodynamic studies of materials important for the development of the energy industry.

36 MATERIALS SCIENCE↗

Temperature responsive hydroxypropyl cellulose for encapsulation

This work focuses on the use of temperature responsive gels (TRGs) (polymeric hydrogels with a large temperature-dependent change in volume) for flavor retention at cooking temperatures. Specifically, we have studied a gel with a lower critical solution temperature (LCST) that swells at low temperatures and collapses at high temperatures. In the collapsed state, the polymer acts as a transport barrier, keeping the volatile flavors inside. We have successfully synthesized a cellulose gel that exhibits this volume change and have encapsulated an oil phase inside the gel. The flavor-loaded encapsulated oil exhibited an increased release time when compared to similar gelatin capsules.

36 MATERIALS SCIENCE↗

Soft Materials Constructed Using Calix[4]pyrrole- and “Texas-Sized” Box-Based Anion Receptors

We present that soft materials have received considerable attention from supramolecular chemists and material scientists alike. This interest reflects the advantages provided by their soft, flexible nature and the convenience of the molecular self-assembly that underlies their preparation. Common soft supramolecular materials include polymeric gels, supramolecular polymers, nanoaggregates, and membranes. Polymeric gels are solidlike networks of cross-linked polymer chains. Supramolecular polymers contain repeat units connected through reversible non-covalent bonds. Nanoaggregates are formed as a result of hydrophobic interactions involving amphiphilic building blocks. Because of the presence of non-covalent interactions, supramolecular soft materials typically display stimuli-responsive or adaptive features. Various macrocyclic hosts, such as cyclodextrins, crown ethers, calixarenes, cucurbiturils, and pillararenes, and many classic non-covalent interactions have been harnessed to construct supramolecular soft materials. Only recently has anion binding been used as the underlying recognition motif. Anions are ubiquitous in the natural world. Their importance has inspired efforts to achieve good anion binding and to exploit anion recognition in a number of fields, including extraction, transport, sensing, and catalysis. Most of this effort has involved the use of stand-alone anion receptors. On the other hand, soft materials with anion recognition features could lead to new macromolecular systems of interest in the context of many application areas. In this Account, we summarize the latest efforts from our laboratory to prepare supramolecular soft materials, including polymeric gels, supramolecular polymers, and nanoaggregates, with bona fide anion recognition features. Two anion receptor systems, namely, calix[4]pyrroles (C4Ps) and a tetraimidazolium macrocycle known as the “Texas-sized” molecular box (TxSB), have been used for this purpose. To date, TxSB-based hydrogels have been utilized to capture anions from water and for coded information applications; C4P-based organic polymeric gels have been used to extract dianions from aqueous source phases and for the on-site detection of chloride anions. Polymers containing C4P and TxSB anion recognition subunits typically display responsive features and can be modified through application of appropriately chosen external stimuli. For instance, nanoaggregates may be formed as a result of the hydrophobic interactions of C4P- and TxSB-based amphiphiles. The resulting aggregates were found to mimic the structural evolution of organelles and could be used as effective anion and ion pair extractants. This Account summarizes progress to date while underscoring potential opportunities associated with combining anion recognition and soft materials chemistry. Finally, the hope is to stimulate further advances in broad areas, including polymer science, supramolecular chemistry, biology, materials research, and information storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

RNA–Polymer Conjugates via Direct Incorporation of the Chain Transfer Agent and PET–RAFT Polymerization

Covalent conjugation of RNA with synthetic polymers has emerged as a powerful approach for creating bioconjugates with synergistically enhanced properties. However, conventional methods require solid-phase synthesis to preinstall functional groups in RNA, significantly limiting practical applications. Here, we present a novel approach for synthesizing RNA–polymer conjugates via direct incorporation of chain transfer agent (CTA) into RNA through acylation chemistry and reversible addition–fragmentation chain transfer (RAFT) polymerization. A CTA-functionalized acyl imidazole reagent was synthesized to facilitate direct and covalent modification of various RNAs by reacting with their 2′-hydroxyl groups. Subsequent RAFT polymerization using RNA–CTA as a macro-CTA enabled direct grafting-from RNA, yielding RNA conjugates with controlled molecular weight and low dispersity. Notably, this postsynthetic modification strategy was successfully extended to modify biomass RNA, yielding thermoresponsive conjugates and biodegradable hydrogels. Overall, this advance allowed for the direct modification of synthetic and biomass RNAs, significantly enhancing the accessibility of functional RNA–polymer materials.

biomass↗

A Facile Method for Synthesizing Dendritic Core–Shell Structured Ternary Metallic Aerogels and Their Enhanced Electrochemical Performances

Currently, three dimensional self-supported metallic structures are attractive for their unique properties of high porosity, low density, excellent conductivity etc. that promote their wide application in fuel cells. Here, for the first time, we report a facile synthesis of dendritic core-shell structured Au/Pt 3 Pd ternary metallic aerogels via a one-pot self-assembly gelation strategy. The as-prepared Au/Pt 3 Pd ternary metallic aerogels demonstrated superior electrochemical performances toward oxygen reduction reaction compared to commercial Pt/C. The unique dendritic core-shell structures, Pt 3 Pd alloyed shells and the cross-linked network structures are beneficial for the electrochemical oxygen reduction reaction performances of the Pt-based materials via the electronic effect, geometric effect and synergistic effect. Lastly, this strategy of fabrication of metallic hydrogels and aerogels as well as their exceptional properties hold great promise in a variety of applications.

36 MATERIALS SCIENCE↗

Highly Reversible Sodiation/Desodiation from a Carbon-Sandwiched SnS2 Nanosheet Anode for Sodium Ion Batteries

The further improvement of sodium ion batteries requires the elucidation of the mechanisms pertaining to reversibility, which allows the novel design of the electrode structure. Her; through a hydrogel-embedding method, we are able to confine the growth of few-layer SnS 2 nanosheets between a nitrogen- and sulfur-doped carbon nanotube (NS-CNT) and amorphous carbon. The obtained carbon-sandwiched SnS 2 nanosheets demonstrate excellent sodium storage properties. In operando small-angle X-ray scattering combined with the ex situ X-ray absorption near edge spectra reveal that the redox reactions between SnS 2 /NS-CNT and the sodium ion are highly reversible. Furthermore, on the contrary, the nanostructure evolution is found to be irreversible, in which the SnS 2 nanosheets collapse, followed by the regeneration of SnS 2 nanoparticles. This work provides operando insights into the chemical environment evolution and structure change of SnS 2 -based anodes, elucidating its reversible reaction mechanism, and illustrates the significance of engineered carbon support in ensuring the electrode structure stability.

25 ENERGY STORAGE↗

Crystalline oligo(ethylene sulfide) domains define highly stable supramolecular block copolymer assemblies.

With proper control over copolymer design and solvation conditions, self-assembled materials display impressive morphological variety that encompasses nanoscale colloids as well as bulk three-dimensional architectures. Here we take advantage of both hydrophobicity and crystallinity to mediate supra-molecular self-assembly of spherical micellar, linear fibrillar, or hydrogel structures by a family of highly asymmetric poly(ethylene glycol)-b-oligo(ethylene sulfide) (PEG-OES) copolymers. Assembly structural polymorphism was achieved with modification of PEG-OES topology (linear versus multiarm) and with precise, monomer-by-monomer control of OES length. Notably, all three morphologies were accessed utilizing OES oligomers with degrees of polymerization as short as three. These exceptionally small assembly forming blocks represent the first application of ethylene sulfide oligomers in supramolecular materials. While the assemblies demonstrated robust aqueous stability over time, oxidation by hydrogen peroxide progressively converted ethylene sulfide residues to increasingly hydrophilic and amorphous sulfoxides and sulfones, causing morphological changes and permanent disassembly. We utilized complementary microscopic and spectroscopic techniques to confirm this chemical stimulus-responsive behavior in self-assembled PEG-OES colloidal dispersions and physical gels. In addition to inherent stimulus-responsive behavior, fibrillar assemblies demonstrated biologically relevant molecular delivery, as confirmed by the dose-dependent activation of murine bone marrow-derived dendritic cells following fibril-mediated delivery of the immunological adjuvant monophosphoryl lipid A. In physical gels composed of either linear or multiarm PEG-OES precursors, rheologic analysis also identified mechanical stimulus-responsive shear thinning behavior. Thanks to the facile preparation, user-defined morphology, aqueous stability, carrier functionality, and stimuli-responsive behaviors of PEG-OES supramolecular assemblies, our findings support a future role for these materials as injectable or implantable biomaterials.

cylindrical micelle↗

Effects of Solvent Composition on the Assembly and Relaxation of Triblock Copolymer-Based Polyelectrolyte Gels

The role of solvent selectivity has been explored extensively with regard to its role in the phase behavior of block copolymer assemblies. Traditionally, thermally induced phase separation is employed for generating micelles upon cooling a block copolymer dissolved in a selective solvent. However few amphiphilic, polyelectrolyte-containing block copolymers demonstrate a thermally accessible route of micellization, and solvent exchange routes are frequently employed instead. Here, we describe the use of mixed solvents for obtaining thermoreversible gelation behavior of poly(methyl methacrylate)-poly(methacrylic acid)-poly(methyl methacrylate) (PMMA-PMAA-PMMA) triblock copolymers. One solvent component (dimethyl sulfoxide) is a good solvent for both blocks, and the second solvent component (water) is a selective solvent for the polymer midblock. Rheological frequency sweeps at variable solvent compositions and temperatures demonstrate an adherence to time-temperature-composition superposition, so that changes in the solvent composition are analogous to changes in the Flory-Huggins interaction parameter between end block and solvent. Shift factors used for this superposition are related to the effective activation energy describing the viscosity and stress relaxation response of the triblock copolymer gels. The effectiveness of solvent exchange processes for producing hydrogels with this system is shown to originate from the ability of a small amount of added water to greatly increase the relaxation times of the self-assembled polymer gels that are formed by this process.

36 MATERIALS SCIENCE↗