Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hadronic Colliders”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Factorization of boosted multijet processes for threshold resummation

Explicit applications of factorization theorems for processes at hadron colliders near the hadronic end point have largely focused on simple final states with either no jets (e.g., Drell-Yan) or one inclusive jet (e.g., deep-inelastic scattering and prompt photon production). Factorization for the former type of process gives rise to a soft function that depends on timelike momenta, whereas the soft function for the latter type depends on null momenta. We derive in soft-collinear effective theory a factorization theorem that allows for an arbitrary number of jets, where the jets are defined with respect to a jet algorithm, together with any number of nonstrongly interacting particles. We find the soft function in general depends on the null components of the soft momenta inside the jets and on a timelike component of the soft momentum outside of the jets. This generalizes and interpolates between the soft functions for the cases of no jets and one inclusive jet. We verify consistency of our factorization theorem to O({alpha}{sub s}) for any number of jets. While in this paper we demonstrate consistency only near the hadronic end point, we keep the kinematics general enough (in particular allowing for nonzero boost) to allow for an extension to partonic threshold resummation away from the hadronic end point.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High Energy Physics and Nuclear Physics Network Requirements

The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the U.S. Department of Energy (DOE) Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of SC programs, ESnet regularly updates and refreshes its understanding of the networking requirements needed by instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 25 years. In August 2013, ESnet and the DOE SC Offices of High Energy Physics (HEP) and Nuclear Physics (NP) organized a review to characterize the networking requirements of the programs funded by the HEP and NP program offices. Several key findings resulted from the review. Among them: 1. The Large Hadron Collider's ATLAS (A Toroidal LHC Apparatus) and CMS (Compact Muon Solenoid) experiments are adopting remote input/output (I/O) as a core component of their data analysis infrastructure. This will significantly increase their demands on the network from both a reliability perspective and a performance perspective. 2. The Large Hadron Collider (LHC) experiments (particularly ATLAS and CMS) are working to integrate network awareness into the workflow systems that manage the large number of daily analysis jobs (1 million analysis jobs per day for ATLAS), which are an integral part of the experiments. Collaboration with networking organizations such as ESnet, and the consumption of performance data (e.g., from perfSONAR [PERformance Service Oriented Network monitoring Architecture]) are critical to the success of these efforts. 3. The international aspects of HEP and NP collaborations continue to expand. This includes the LHC experiments, the Relativistic Heavy Ion Collider (RHIC) experiments, the Belle II Collaboration, the Large Synoptic Survey Telescope (LSST), and others. The international nature of these collaborations makes them heavily reliant on transoceanic connectivity, which is subject to longer term service disruptions than terrestrial connectivity. The network engineering aspects of undersea connectivity will continue to be a significant part of the planning, deployment, and operation of the data analysis infrastructure for HEP and NP experiments for the foreseeable future. Given their critical dependency on networking services, the experiments have expressed the need for tight integration (both technically and operationally) of the domestic and the transoceanic parts of the network infrastructure that supports the experiments. 4. The datasets associated with simulations continue to increase in size, and the need to move these datasets between analysis centers is placing ever-increasing demands on networks and on data management systems at the supercomputing centers. In addition, there is a need to harmonize cybersecurity practice with the data transfer performance requirements of the science. This report expands on these points, and addresses others as well. The report contains a findings section in addition to the text of the case studies discussed during the review.

43 PARTICLE ACCELERATORS↗

Crystal Ball: On the Future High Energy Colliders

High energy particle colliders have been in the forefront of particle physics for more than three decades. At present the near term US, European and international strategies of the particle physics community are centered on full exploitation of the physics potential of the Large Hadron Collider (LHC) through its high-luminosity upgrade (HL-LHC). A number of next generation collider facilities have been proposed and are currently under consideration for the medium- and far-future of the accelerator-based high energy physics. In this paper we offer a uniform approach to evaluation of various accelerators based on the feasibility of their energy reach, performance reach and cost range. We briefly review such post-LHC options as linear e+e- colliders in Japan (ILC) or at CERN (CLIC), muon collider, and circular lepton or hadron colliders in China (CepC/SppC) and Europe (FCC). We conclude with a look into ultimate energy reach accelerators based on plasmas and crystals, and some perspectives for the far future of accelerator-based particle physics.

43 PARTICLE ACCELERATORS↗

Prospects for Higgs searches at the Tevatron and LHC in the MSSM with explicit CP violation.

We analyze the Tevatron and Large Hadron Collider (LHC) reach for the Higgs sector of the minimal supersymmetric standard model (MSSM) in the presence of explicit CP violation. Using the most recent studies from the Tevatron and LHC collaborations, we examine the CPX benchmark scenario for a range of CP-violating phases in the soft trilinear and gluino mass terms and compute the exclusion/discovery potentials for each collider on the (MH+,tan{beta}) plane. Projected results from standard model (SM)-like, nonstandard, and charged Higgs searches are combined to maximize the statistical significance. We exhibit complementarity between the SM-like Higgs searches at the LHC with low luminosity and the Tevatron, and estimate the combined reach of the two colliders in the early phase of LHC running.

43 PARTICLE ACCELERATORS↗

Quality Control of Silicon Sensor Modules for Particle Detectors

The High-Luminosity Large Hadron Collider (HL-LHC) will produce a higher rate of particle collisions than the current Large Hadron Collider (LHC), requiring important upgrades to the Compact Muon Solenoid (CMS) to handle an increased amount of data. An important upgrade is the Phase-2 Outer Tracker Upgrade, which consists of 13,000 silicon sensor modules made of two parallel silicon sensors and readout electronics. These modules undergo careful quality control checks both during and after module assembly to ensure precise and reliable detector performance. This project focuses on precision testing for quality control of silicon sensor modules at Fermilab. Hands-on work includes visual inspection, current-voltage testing, module testing, and ultraviolet (UV) light exposure of modules showing abnormal current-voltage behavior. The ultraviolet exposure process improves the abnormal sensor readout data by placing the selected sensor side of the module directly under the UV light inside a controlled box. In addition to laboratory testing and ultraviolet experiments, I developed a Python-based data tool that connects to a module database and allows selected testing conditions and module information to be retrieved and displayed efficiently. These different testing procedures, experimental processes, and computational tools support the broader goal of identifying module issues and improving modules that will be used in the CMS Outer Tracker Phase-2 Upgrade.

Siddiqui, Hooriya [DuPage Coll.] (ORCID:0009000151↗

Precision QCD, Hadronic Structure & Forward QCD, Heavy Ions: Report of Energy Frontier Topical Groups 5, 6, 7 submitted to Snowmass 2021

This report was prepared on behalf of three Energy Frontier Topical Groups of the Snowmass 2021 Community Planning Exercise. It summarizes the status and implications of studies of strong interactions in high-energy experiments and QCD theory. We emphasize the rich landscape and broad impact of these studies in the decade ahead. Hadronic interactions play a central role in the high-luminosity Large Hadron Collider (LHC) physics program, and strong synergies exist between the (HL-)LHC and planned or proposed experiments at the U.S. Electron-Ion Collider, CERN forward physics experiments, high-intensity facilities, and future TeV-range lepton and hadron colliders. Prospects for precision determinations of the strong coupling and a variety of nonperturbative distribution and fragmentation functions are examined. We also review the potential of envisioned tests of new dynamical regimes of QCD in high-energy and high-density scattering processes with nucleon, ion, and photon initial states. The important role of the high-energy heavy-ion program in studies of nuclear structure and the nuclear medium, and its connections with QCD involving nucleons are summarized. We address ongoing and future theoretical advancements in multi-loop QCD computations, lattice QCD, jet substructure, and event generators. Cross-cutting connections between experimental measurements, theoretical predictions, large-scale data analysis, and high-performance computing are emphasized.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quality Control of Silicon Sensor Modules for Particle Detectors

The High-Luminosity Large Hadron Collider (HL-LHC) will produce a higher rate of particle collisions than the current Large Hadron Collider (LHC), requiring significant upgrades to the Compact Muon Solenoid (CMS) to handle the increased amount of data. An important upgrade is the Phase-2 Outer Tracker Upgrade, which consists of 13,000 silicon sensor modules made of two parallel silicon sensors and readout electronics. These modules undergo careful quality control checks both during and after module assembly to ensure precise and reliable detector performance. This project focuses on precision testing for quality control of silicon sensor modules at Fermilab. Hands-on work includes visual inspection, current-voltage testing, module testing, and ultraviolet (UV) light exposure of modules showing abnormal current-voltage behavior. The ultraviolet exposure process improves the abnormal sensor readout data by placing the selected sensor side of the module directly under the UV light inside a controlled box. In addition to laboratory testing and ultraviolet experiments, I developed a Python-based data tool that connects to a module database and allows selected testing conditions and module information to be retrieved and displayed efficiently. These different testing procedures, experimental processes, and computational tools support the broader goal of identifying module issues and improving modules that will be used in the CMS Outer Tracker Phase-2 Upgrade.

Siddiqui, Hooriya [DuPage Coll.; Fermilab] (ORCID:↗

Search for invisible decays of the Higgs boson produced in association with a hadronically decaying vector boson in pp collisions at √s = 8 with the ATLAS detector

A search for Higgs boson decays to invisible particles is performed using 20.3 fb⁻¹ of pp collision data at a centre-of-mass energy of 8 TeV recorded by the ATLAS detector at the Large Hadron Collider. The process considered is Higgs boson production in association with a vector boson (V = W or Z) that decays hadronically, resulting in events with two or more jets and large missing transverse momentum. No excess of candidates is observed in the data over the background expectation. The results are used to constrain V H production followed by H decaying to invisible particles for the Higgs boson mass range 115 < m H < 300 GeV. The 95 % confidence-level observed upper limit on σ VH × BR(H → inv.) varies from 1.6 pb at 115 GeV to 0.13 pb at 300 GeV. Assuming Standard Model production and including the gg → H contribution as signal, the results also lead to an observed upper limit of 78% at 95% confidence level on the branching ratio of Higgs bosons decays to invisible particles at a mass of 125 GeV.

43 PARTICLE ACCELERATORS↗

Deducing the nature of dark matter from direct and indirect detection experiments in the absence of collider signatures of new physics

Despite compelling arguments that significant discoveries of physics beyond the standard model are likely to be made at the Large Hadron Collider, it remains possible that this machine will make no such discoveries, or will make no discoveries directly relevant to the dark matter problem. In this article, we study the ability of astrophysical experiments to deduce the nature of dark matter in such a scenario. In most dark matter studies, the relic abundance and detection prospects are evaluated within the context of some specific particle physics model or models (e.g., supersymmetry). Here, assuming a single weakly interacting massive particle constitutes the Universe's dark matter, we attempt to develop a model-independent approach toward the phenomenology of such particles in the absence of any discoveries at the Large Hadron Collider. In particular, we consider generic fermionic or scalar dark matter particles with a variety of interaction forms, and calculate the corresponding constraints from and sensitivity of direct and indirect detection experiments. The results may provide some guidance in disentangling information from future direct and indirect detection experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Studies of top quark production at D0

I present recent results on top quark production in pp collisions at a center of mass energy of 1.96 TeV. The studies were performed by the D0 collaboration using approximately 5 fb{sup -1} of data taken during Run II at the Fermilab Tevatron accelerator. The top quark is the heaviest known elementary particle and completes the quark sector of the three-generation structure of the standard model (SM). It differs from the other quarks not only by its much larger mass, but also by its lifetime which is too short to build hadronic bound states. The SM predicts that top quarks are created via two independent production mechanisms at hadron colliders. The primary mode, in which a t{bar t} pair is produced from a gtt vertex via the strong interaction, was used by the D0 and CDF collaborations to establish the existence of the top quark in 1995. The second production mode of top quarks at hadron colliders is the electroweak production of a single top quark from a Wtb vertex. The predicted cross section for single top quark production is about half that of t{bar t} pairs but the signal-to-background ratio is much worse; observation of single top quark production has therefore until recently been impeded by its low rate and difficult background environment compared to the top pair production. In the following sections I will present results for the measurement of the t{bar t} pair and the single top quark production cross section using respectively 5.3 fb{sup -1} and 5.4 fb{sup -1} of data taken by the D0 experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

FCC-ee: The Lepton Collider

Particle physics has arrived at an important moment of its history. The discovery of the Higgs boson, with a mass of 125 GeV, completes the matrix of particles and interactions that has constituted the “Standard Model” for several decades. This model is a consistent and predictive theory, which has so far proven successful at describing all phenomena accessible to collider experiments. On the other hand, several experimental facts do require the extension of the Standard Model and explanations are needed for observations such as the domination of matter over antimatter, the evidence for dark matter and the non-zero neutrino masses. Theoretical issues that need to be addressed include the hierarchy problem, the neutrality of the Universe, the stability of the Higgs boson mass upon quantum corrections and the strong CP problem. This report contains the description of a novel research infrastructure based on a highest-luminosity energy frontier electron-positron collider (FCC-ee) to address the open questions of modern physics. It will be a general precision instrument for the continued in-depth exploration of nature at the smallest scales, optimised to measure precisely the properties of the Higgs boson at the per-cent level, the Z and W bosons, the top quark and the Higgs coupling to the Z at the per-mil level. FCC-ee will provide unprecedented sensitivity to signs of new physics appearing either in the form of small deviations from the Standard Model or as rare decay processes. This collider will be implemented in stages, successively spanning the entire energy range from the Z pole over the WW threshold and H production peak to the t"t" ̅ threshold. Most of the infrastructure (e.g. underground structures, surface sites, electrical distribution, cooling & ventilation, RF systems) can be directly re-used for a subsequent highest-energy hadron collider (described in the FCC conceptual design report volume 3), serving the world-wide particle-physics community in a highly synergetic and cost-effective manner throughout the 21st century. The European Strategy for Particle Physics (ESPP) update 2013 stated “To stay at the forefront of particle physics, Europe needs to be in a position to propose an ambitious post-LHC accelerator project at CERN by the time of the next Strategy update”. The FCC study has implemented the ESPP recommendation by developing a long-term vision for an “accelerator project in a global context”. This document describes the detailed design and preparation of a construction project for a post-LHC circular lepton collider “in collaboration with national institutes, laboratories and universities worldwide”, and enhanced by a strong participation of industrial partners. Now, a coordinated preparation effort can be based on a core of an ever-growing consortium of already more than 135 institutes worldwide. The technology for constructing a high-energy, highest-luminosity circular lepton collider exists today. The FCC-ee concept comprises a power-saving twin-aperture magnet system, a continuous top-up injection scheme for stable operation and maximum integrated luminosity. Combined with an energy staging scheme, the FCC-ee represents the most efficient and most sustainable route for executing the research required to discover signs of new physics beyond the Standard Model. The step-wise energy increase of the FCC-ee does not require any additional civil engineering activities. Strategic R&D for FCC-ee aims at minimising construction cost and energy consumption, while maximising the socio-economic impact. It will mitigate residual technology-related risks and ensure that industry can benefit from an acceptable economic utility. Concerning the implementation, a preparatory phase of about eight years is both necessary and adequate to establish the project governance and organisation structures, building the international machine and experiment consortia, developing a territorial implementation plan in agreement with the host-states’ requirements, optimising the disposal of land and underground volumes and preparing the civil engineering project. Such a large-scale, international fundamental research infrastructure, tightly involving industrial partners and providing training at all education levels, will be a strong motor of economic and societal development in all participating nations. The FCC study has implemented a set of actions towards a coherent vision for the world-wide high-energy and particle physics community, providing a collaborative framework for topically complementary and geographically well-balanced contributions. This conceptual design report lays the foundation for a subsequent infrastructure preparatory and technical design phase.

43 PARTICLE ACCELERATORS↗

Searches for Heavy Vector Bosons at CDF

The existence of additional vector bosons are theoretically well motivated, arising naturally in many extensions of the Standard Model. Experimentally, such particles typically have clean signatures and therefore should be observed in hadron colliders if they are produced. We review recent searches for heavy vector bosons with CDF at the Tevatron and provide limits on their production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Diboson Production at D0

We present recent diboson production measurements from the D0 experiment at Fermilab's Tevatron collider. The production of ZZ was observed using leptonic final states. Z{gamma} {yields} vv{gamma} was observed and used to set the most stringent limits from a hadron collider on anomalous Z{gamma}{gamma} and ZZ{gamma} trilinear gauge couplings (TGCs). WW events with leptonic final states and WW + WZ events with semi-leptonic final states were used to set limits on anomalous WWZ and WW{gamma} TGCs. Finally, limits on anomalous WWZ and WW{gamma} TGCs were obtained from a combination of the fully-leptonic W{gamma}, WW, and WZ channels and the semi-leptonic WW and WZ channels, giving the most stringent limits from a hadron collider.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Performance Before and After Irradiation of Pixelated 3D Silicon Sensors for the HL-LHC CMS Tracker

The Large Hadron Collider (LHC) particle accelerator at European Center for Nuclear Research (CERN) will be shut down starting in 2026 to achieve the High Luminosity Large Hadron Collider (HL-LHC) upgrade. The upgrade will allow for higher fluences, in order to increase the probability of detecting increasingly rare particles, and to obtain higher precision measurements of known particles. To accommodate the new accelerator conditions, many aspects of the Compact Muon Solenoid (CMS) detector will be upgraded; of particular interest for this thesis are the silicon pixel detectors located in the inner tracker. These will be replaced and upgraded to accommodate the higher fluences of the HL-LHC upgrade, as well as to replace existing sensors which have sustained radiation damage. In order for the new sensors to operate under high luminosity conditions, they must be increasingly radiation hard, and in order to detect rare particles, they must be increasingly more precise. The performance of one Centro Nacional de Microelectronica (CNM) 3D silicon sensor before and after undergoing irradiation at fluences similar to those which will be observed at the HL-LHC was investigated to determine radiation hardness and precision. Data was collected at Fermi National Laboratory (Fermilab), in the Fermi National Laboratory Test Beam Facility (FTBF) silicon tracker telescope, which can be used to determine the number of particles, and tracks made by high energy protons passing through. The sensor was also irradiated at Fermilab in the Irradiation Test Area (ITA). Prior to data collection a tuning procedure is carried out to determine ideal bias voltage operating conditions, mask noisy and dead pixels, adjust to the ideal threshold, and map sensor gain. Data is then collected at the FTBF, where the sensor is installed in the center of the FTBF silicon telescope. Variables, including angle and bias voltage, are varied throughout data collection. Data is then processed using an alignment software to determine the exact telescope geometry, along with the tracks which were observed passing through the sensor and telescope. Sensor performance was found to be comparable before and after irradiation, with irradiated results showing slightly lower efficiencies and cluster sizes. Position resolution is comparable both before and after irradiation, and similar distributions of cluster shape are observed. After irradiation, the sensor shows increasing collected charge with bias, an indication of increased width of the depletion region. Peak charge pre-irradiation is higher than post-irradiation peak charge, indicating the irradiated results are not taken under fully-depleted conditions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Anatomy of $tthh$ physics at the HL-LHC

The t t h h production at colliders contains rich information on the nature of the Higgs boson. In this article, we systematically studied its physics at the high-luminosity Large Hadron Collider (HL-LHC), using exclusive channels with multiple ( ≥ 5 ) b -jets and one lepton ( 5 b 1 ℓ ), multiple ( ≥ 5 ) b -jets and opposite-sign dilepton ( 5 b 2 ℓ ), same-sign dilepton ( SS 2 ℓ ), multiple leptons (multi- ℓ ), and ditau resonance ( τ τ ). The scenarios analyzed include: (1) the t t h h production in Standard Model; (2) the t t h h production mediated by anomalous cubic Higgs self-coupling and t t h h contact interaction; (3) heavy Higgs ( H ) production with t t H → t t h h ; and (4) pair production of fermionic top partners ( T ) with T T → t t h h . To address the complication of event topologies and the mess of combinatorial backgrounds, a tool of boosted-decision-tree was applied in the analyses. The 5 b 1 ℓ and SS 2 ℓ analyses define the two most promising channels. For the nonresonant t t h h production, a combination of these exclusive analyses allows for its measurement in the SM with a statistical significance ~ 0.9 σ (with S / B > 1 % ), and may partially break the sensitivity degeneracy with respect to a varying cubic Higgs self-coupling, a difficulty usually thought to exist in gluon fusion di-Higgs analysis at HL-LHC. These sensitivities were also projected to future hadron colliders at 27 TeV and 100 TeV. For the resonant t t h h productions, the heavy Higgs boson in type II two-Higgs-doublet-model could be efficiently searched for between the mass thresholds 2 m h < m H < 2 m t and even beyond that, for relatively small tan β (vacuum alignment), while the fermionic top partners in composite Higgs models could be probed up to ~ 1.5 TeV and ~ 1.7 TeV , for Br ( T → t h ) = 25 % and 50%, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Domain-Wall Standard Model in non-compact 5D and LHC phenomenology

We propose a framework to construct “Domain-Wall Standard Model” in a non-compact 5-dimensional spacetime, where all the Standard Model (SM) fields are localized in certain domains of the 5th dimension and the SM is realized as a 4-dimensional effective theory without any compactification for the 5th dimension. In this context, we investigate the collider phenomenology of the Kaluza–Klein (KK) modes of the SM gauge bosons and the current constraints from the search for a new gauge boson resonance at the Large Hadron Collider Run-2. The couplings of the SM fermions with the KK-mode gauge bosons depend on the configuration of the SM fermions in the 5-dimensional bulk. This “geometry” of the model can be tested at the future Large Hadron Collider experiment, once a KK-mode of the SM gauge boson is discovered.

Astronomy & Astrophysics↗

Measurements of multijet event isotropies using optimal transport with the ATLAS detector

A measurement of novel event shapes quantifying the isotropy of collider events is performed in 140 fb -1 of proton-proton collisions with $\sqrt{s}$ = 13 TeV centre-of-mass energy recorded with the ATLAS detector at CERN’s Large Hadron Collider. These event shapes are defined as the Wasserstein distance between collider events and isotropic reference geometries. This distance is evaluated by solving optimal transport problems, using the ‘Energy-Mover’s Distance’. Isotropic references with cylindrical and circular symmetries are studied, to probe the symmetries of interest at hadron colliders. The novel event-shape observables defined in this way are infrared- and collinear-safe, have improved dynamic range and have greater sensitivity to isotropic radiation patterns than other event shapes. The measured event-shape variables are corrected for detector effects, and presented in inclusive bins of jet multiplicity and the scalar sum of the two leading jets’ transverse momenta. The measured distributions are provided as inputs to future Monte Carlo tuning campaigns and other studies probing fundamental properties of QCD and the production of hadronic final states up to the TeV-scale.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for WW and WZ production in lepton plus jets final state at CDF

We present a search for WW and WZ production in final states that contain a charged lepton (electron or muon) and at least two jets, produced in {radical}(s)=1.96 TeV pp collisions at the Fermilab Tevatron, using data corresponding to 1.2 fb{sup -1} of integrated luminosity collected with the CDF II detector. Diboson production in this decay channel has yet to be observed at hadron colliders due to the large single W plus jets background. An artificial neural network has been developed to increase signal sensitivity, as compared with an event selection based on conventional cuts. We set a 95% confidence level upper limit of {sigma}{sub WW}xBR(W{yields}l{nu}{sub l},W{yields}jets)+{sigma}{sub WZ}xBR(W{yields}l{nu}{sub l},Z{yields}jets)<2.88 pb, which is consistent with the standard model next-to-leading-order cross section calculation for this decay channel of 2.09{+-}0.12 pb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗