Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLE MOBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Magneto-transport analysis of an ultra-low-density two-dimensional hole gas in an undoped strained Ge/SiGe heterostructure

We report the magneto-transport, scattering mechanisms, and effective mass analysis of an ultra-low density two-dimensional hole gas capacitively induced in an undoped strained Ge/Si{sub 0.2}Ge{sub 0.8} heterostructure. This fabrication technique allows hole densities as low as p ∼ 1.1 × 10{sup 10 }cm{sup −2} to be achieved, more than one order of magnitude lower than previously reported in doped Ge/SiGe heterostructures. The power-law exponent of the electron mobility versus density curve, μ ∝ n{sup α}, is found to be α ∼ 0.29 over most of the density range, implying that background impurity scattering is the dominant scattering mechanism at intermediate densities in such devices. A charge migration model is used to explain the mobility decrease at the highest achievable densities. The hole effective mass is deduced from the temperature dependence of Shubnikov-de Haas oscillations. At p ∼ 1.0 × 10{sup 11 }cm{sup −2}, the effective mass m* is ∼0.105 m{sub 0}, which is significantly larger than masses obtained from modulation-doped Ge/SiGe two-dimensional hole gases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Beyond modulation doping: Engineering a semiconductor to be ambipolar, or making an ON-OFF-ON transistor

Semiconductors are traditionaly either p-type or n-type, meaning that the mobile charge carriers in them are either 'holes' in the valence band or electrons in the conduction band. Ambipolar conduction implies that the experimenter should be able to populate the same channel with either electrons or holes in a controlled manner. This has been shown to be possible in newer materials like Graphene and some organic semiconductors. 'Ambipolarity' can open up new device possibilities as well as new ways to study fundamental scattering mechanisms in semiconductors. However, achieving this in a conventional high mobility structure like a GaAs-AlGaAs heterostructure/quantum well requires new thinking. It was realized, that to do this modulation doping must be given up and techniques to make an undoped heterostructure conduct, must be developed first. Such structures have been developed by only a few groups worldwide. They are of great interest to low temperature physicists working with Quantum Hall states and mesoscopic/nano structures in the ballistic regime. We discuss the reason behind this interest and the analysis of scattering mechanisms in such structures. Finally very recent experimental success in developing fully gate controlled ambipolar structures where both electron and hole mobilites exceed 1 million cm{sup 2}/Vs at low temperatures (T∼1Kelvin) are discussed. Such gated ambipolar structures can be used to analyse scattering mechanisms in ultra-high mobility 2dimensional electron and hole gases in a way that is not possible using other techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular Structure Controlled Transitions between Free-Charge Generation and Trap Formation in a Conjugated Copolymer Series

Charge transfer copolymers, where each repeating unit has at least one “donor” and one “acceptor” block, have played important roles in recent advances in organic photovoltaic (OPV) devices, however design criteria for these materials are still not completely clear. Here we show that the well-recognized LUMO-LUMO energy off-set design criterion for OPV materials using a fullerene acceptor is challenged in a series of copolymers, PTRn (n = 3, 5, 7 and 9), where n is the number of fused aromatic rings in the “donor” block and thienothiophene is the “acceptor” block in each repeating unit. Photoexcitation dynamics of PTRn copolymers in solution and BHJ (bulk heterojunction) films demonstrated that local push-pull interactions between the “donor” block and the “acceptor” block weakens with increasing n, whereas the LUMO-LUMO off-set between the polymer and PC71BM (Phenyl-C71-butyric acid methyl ester) increases. Such a counter intuitive trend can be explained by local energetics of each repeating unit as a function of n. The energetic changes transform the copolymer with strong local charge transfer character for efficient hole-electron separation to localized hole-electron pairs with low mobility, despite the apparent increase of the polymer/PC71BM LUMO-LUMO off-set. This suggests the importance of local charge transfer character in these copolymers in the initial exciton splitting dynamics, which could ultimately be reflected in the device performance.

36 MATERIALS SCIENCE↗

Design and Synthesis of Annulated Benzothiadiazoles via Dithiolate Formation for Ambipolar Organic Semiconductors

Substituted 2,1,3-benzothiadiazole ( BTD ) is a widely used electron acceptor unit for functional organic semiconductors. Difluorination or annulation on the 5,6-position of the benzene ring is among the most adapted chemical modifications to tune the electronic properties, though each sees its own limitations in regulating the frontier orbital levels. Herein, a hitherto unreported 5,6-annulated BTD acceptor, denoted as ssBTD , is designed and synthesized by incorporating an electron-withdrawing 2-(1,3-dithiol-2-ylidene)malononitrile moiety via aromatic nucleophilic substitution of the 5,6-difluoroBTD ( ffBTD ) precursor. Unlike the other reported BTD annulation strategies, this modification leads to the simultaneous decrease in both frontier orbital energies, a welcoming feature for photovoltaic applications. Incorporation of ssBTD into conjugated polymers results in materials boasting broad light absorption, dramatic solvatochromic and thermochromic responses (>100 nm shift and a band gap difference of ~0.28 eV), and improved crystallinity in the solid state. Such physical properties are in accordance with the combined electron-withdrawing effect and significantly increased polarity associated with the ssBTD unit, as revealed by detailed theoretical studies. Furthermore, the thiolated ssBTD imbues the polymer with ambipolar charge transport property, in contrast to the ffBTD -based polymer, which transports holes only. While the low mobilities (10 -4 to 10 -5 cm 2 V -1 s -1 ) could be further optimized, detailed studies validate that the thioannulated BTD is a versatile electron-accepting unit for the design of functional stimuli-responsive optoelectronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and physico-chemical properties of nanometric boron delta-doped diamond structures

Heavily boron doped diamond epilayers with thicknesses ranging from 40 to less than 2 nm and buried between nominally undoped thicker layers have been grown in two different reactors. Two types of [100]-oriented single crystal diamond substrates were used after being characterized by X-ray white beam topography. The chemical composition and thickness of these so-called delta-doped structures have been studied by secondary ion mass spectrometry, transmission electron microscopy, and spectroscopic ellipsometry. Temperature-dependent Hall effect and four probe resistivity measurements have been performed on mesa-patterned Hall bars. The temperature dependence of the hole sheet carrier density and mobility has been investigated over a broad temperature range (6 K < T < 450 K). Depending on the sample, metallic or non-metallic behavior was observed. A hopping conduction mechanism with an anomalous hopping exponent was detected in the non-metallic samples. All metallic delta-doped layers exhibited the same mobility value, around 3.6 ± 0.8 cm{sup 2}/Vs, independently of the layer thickness and the substrate type. Comparison with previously published data and theoretical calculations showed that scattering by ionized impurities explained only partially this low common value. None of the delta-layers showed any sign of confinement-induced mobility enhancement, even for thicknesses lower than 2 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetotransport properties of the topological nodal-line semimetal CaCdSn

Topological nodal-line semimetals support protected band crossings, which form nodal lines or nodal loops between the valence and conduction bands and exhibit novel transport phenomena. Here we address the topological state of the nodal-line semimetal candidate material CaCdSn, and report magnetotransport properties of its single crystals grown by the self-flux method. In this work, our first-principles calculations show that the electronic structure of CaCdSn harbors a single nodal loop around the Γ point in the absence of spin-orbit coupling effects. The nodal crossings in CaCdSn are found to lie above the Fermi level and yield a Fermi surface that consists of both electron and hole pockets. CaCdSn exhibits high mobility (μ ≈ 3.44 × 10 4 cm 2 V –1 s –1 ) and displays a field-induced metal-semiconductor-like crossover with a plateau in resistivity at low temperature. We observe an extremely large and quasilinear nonsaturating transverse as well as longitudinal magnetoresistance (MR) at low temperatures (≈ 7.44 × 10 3 % and ≈ 1.71 × 10 3 %, respectively, at 4 K). We also briefly discuss possible reasons behind such a large quasilinear magnetoresistance and its connection with the nontrivial band structure of CaCdSn.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A New Route Toward Atomically Flat and Defect-Free Ge/SiGe Planar Heterostructures

Germanium-based planar heterostructures are emerging as versatile platforms for realizing quantum devices. In particular, planar Ge/SiGe quantum wells (QWs) host hole states with exceptionally high mobility and strong, electrically tunable spin–orbit interactions, enabling full electrical control of quantum information. A key requirement for these systems is the growth of microscopic, defect-free, atomically flat Ge QW heterostructures on relaxed or reverse-graded SiGe buffer layers, as well as on commercial Ge substrates. While several physical deposition techniques have demonstrated high-quality planar Ge/SiGe QWs, a major challenge remains: minimizing defect density typically requires high growth temperatures, which are incompatible with standard CMOS process flows. Here, we present a convenient low-temperature process for realizing high-quality planar SiGe/Ge heterostructures using a combination of thermal and electron-beam evaporation. We systematically map the effects of ex-situ and in-situ substrate preparation protocols, growth temperature, and post-deposition annealing conditions, and correlate these parameters with surface roughness and defect density. We find that in-situ oxide desorption conditions and post-annealing parameters have the most pronounced impact on improving surface quality. Under optimized conditions, we achieve atomically smooth surfaces with root-mean-square roughness σrms​ ≤ 10 Å and negligible defect density. Interestingly, thermally evaporated Ge layers exhibit oriented triangular crystallites that elongate upon post-annealing in the presence of high Ge vapor pressure. These results demonstrate that this simple, low-temperature deposition approach is a viable and effective route for achieving high-quality Ge QW heterostructures, with strong potential for scalable quantum computing and sensing applications.

Tripathi, Malvika [Fermilab] (ORCID:00000001989251↗

A New Route Toward Atomically Flat and Defect-Free Ge/SiGe Planar Heterostructures

Germanium-based planar heterostructures are emerging as versatile platforms for realizing quantum devices. In particular, planar Ge/SiGe quantum wells (QWs) host hole states with exceptionally high mobility and strong, electrically tunable spin–orbit interactions, enabling full electrical control of quantum information. A key requirement for these systems is the growth of microscopic, defect-free, atomically flat Ge QW heterostructures on relaxed or reverse-graded SiGe buffer layers, as well as on commercial Ge substrates. While several physical deposition techniques have demonstrated high-quality planar Ge/SiGe QWs, a major challenge remains: minimizing defect density typically requires high growth temperatures, which are incompatible with standard CMOS process flows. Here, we present a convenient low-temperature process for realizing high-quality planar SiGe/Ge heterostructures using a combination of thermal and electron-beam evaporation. We systematically map the effects of ex-situ and in-situ substrate preparation protocols, growth temperature, and post-deposition annealing conditions, and correlate these parameters with surface roughness and defect density. We find that in-situ oxide desorption conditions and post-annealing parameters have the most pronounced impact on improving surface quality. Under optimized conditions, we achieve atomically smooth surfaces with root-mean-square roughness σrms​ ≤ 10 Å and negligible defect density. Interestingly, thermally evaporated Ge layers exhibit oriented triangular crystallites that elongate upon post-annealing in the presence of high Ge vapor pressure. These results demonstrate that this simple, low-temperature deposition approach is a viable and effective route for achieving high-quality Ge QW heterostructures, with strong potential for scalable quantum computing and sensing applications.

Tripathi, Malvika [Fermilab] (ORCID:00000001989251↗

Study of Carrier Mobilities in 4H-SiC MOSFETS Using Hall Analysis

The channel conduction in 4H-SiC metal–oxide–semiconductor field effect transistors (MOSFETs) are highly impacted by charge trapping and scattering at the interface. Even though nitridation reduces the interface trap density, scattering still plays a crucial role in increasing the channel resistance in these transistors. In this work, the dominant scattering mechanisms are distinguished for inversion layer electrons and holes using temperature and body-bias-dependent Hall measurements on nitrided lateral 4H-SiC MOSFETs. The effect of the transverse electric field (E eƒƒ ) on carrier mobility is analyzed under strong inversion condition where surface roughness scattering becomes prevalent. Power law dependencies of the electron and hole Hall mobility for surface roughness scattering are determined to be E$^{-1.8}_{eƒƒ}$ and E$^{-2.4}_{eƒƒ}$, respectively, analogous to those of silicon MOSFETs. Moreover, for n-channel MOSFETs, the effect of phonon scattering is observed at zero body bias, whereas in p-channel MOSFETs, it is observed only under negative body biases. Along with the identification of regimes governed by different scattering mechanisms, these results highlight the importance of the selection of substrate doping and of E eƒƒ in controlling the value of channel mobility in 4H-SiC MOSFETs.

36 MATERIALS SCIENCE↗

Electronic and transport properties of Li-doped NiO epitaxial thin films

NiO is a p-type wide bandgap semiconductor of use in various electronic devices ranging from solar cells to transparent transistors. Understanding and improving its optical and transport properties have been of considerable interest. In this work, we have investigated the effect of Li doping on the electronic, optical and transport properties of NiO epitaxial thin films grown by pulsed laser deposition. We show that Li doping significantly increases the p-type conductivity of NiO, but all the films have relatively low room-temperature mobilities (<0.05 cm2 V -1 s -1 ). The conduction mechanism is better described by small-polaron hoping model in the temperature range of 200 K < T <330 K, and variable range hopping at T <200 K. A combination of x-ray photoemission and O K-edge x-ray absorption spectroscopic investigations reveal that the Fermi level gradually shifts toward the valence band maximum (VBM) and a new hole state develops with Li doping. Both the VBM and hole states are composed of primarily Zhang-Rice bound states, which accounts for the small polaron character (low mobility) of hole conduction. Our work provides guidelines for the search for p-type oxide materials and device optimization. NiO is a p-type wide bandgap semiconductor of use in various electronic devices ranging from solar cells to transparent transistors. This work reports the controlling of conductivity and increase of work functions by Li doping.

Environmental Molecular Sciences Laboratory↗

X‐Ray Scattering Reveals Ion‐Induced Microstructural Changes During Electrochemical Gating of Poly(3‐Hexylthiophene)

Abstract The heterogeneous microstructure of semicrystalline polymers complicates the relationship between their electrical conductivity and carrier concentration. Charge transport models typically describe conductivity with an assumption of uniform doping throughout the material. Here, the evolution in morphology and optoelectronic properties of poly(3‐hexylthiophene) (P3HT) is reported as a function of carrier concentration in an organic electrochemical transistor using a polymeric ionic liquid (PIL) as the gate insulator. Operando grazing incidence X‐ray scattering reveals that negatively charged ions from the dielectric first infiltrate the amorphous regions of the semiconductor, and then penetrate the crystalline regions at a critical carrier density of 4 × 10 20 cm −3 . Upon infiltration, the crystallites expand by 12% in the alkyl stacking direction and compress by 4% in the π–π stacking direction. The change in crystal structure of P3HT correlates with a sharply increasing effective carrier mobility. UV–visible spectroscopy reveals that holes induced in P3HT first reside in the crystalline regions of the polymer, which verifies that a charge carrier need not be in the same physical domain as its associated counterion. The dopant‐induced morphological changes of P3HT rationalize the dependence of mobility on carrier concentration, suggesting a phase transition of crystalline regions at high carrier concentration.

Thomas, Elayne M.↗

Dodecaborane‐Based Dopants Designed to Shield Anion Electrostatics Lead to Increased Carrier Mobility in a Doped Conjugated Polymer

Abstract One of the most effective ways to tune the electronic properties of conjugated polymers is to dope them with small‐molecule oxidizing agents, creating holes on the polymer and molecular anions. Undesirably, strong electrostatic attraction from the anions of most dopants localizes the holes created on the polymer, reducing their mobility. Here, a new strategy utilizing a substituted boron cluster as a molecular dopant for conjugated polymers is employed. By designing the cluster to have a high redox potential and steric protection of the core‐localized electron density, highly delocalized polarons with mobilities equivalent to films doped with no anions present are obtained. AC Hall effect measurements show that P3HT films doped with these boron clusters have conductivities and polaron mobilities roughly an order of magnitude higher than films doped with F 4 TCNQ, even though the boron‐cluster‐doped films have poor crystallinity. Moreover, the number of free carriers approximately matches the number of boron clusters, yielding a doping efficiency of ≈100%. These results suggest that shielding the polaron from the anion is a critically important aspect for producing high carrier mobility, and that the high polymer crystallinity required with dopants such as F 4 TCNQ is primarily to keep the counterions far from the polymer backbone.

Aubry, Taylor J.↗

Manipulation of Hole Spin Transport in Germanium

Downscaling of the silicon metal-oxide-semiconductor field-effect transistor technology is expected to reach a fundamental limit soon. A paradigm shift in computing is occurring. Spin field-effect transistors are considered a candidate architecture for next-generation microelectronics. Being able to leverage the existing infrastructure for silicon, a spin field-effect transistor technology based on group IV heterostructures will have unparalleled technical and economical advantages. For the same material platform reason, germanium hole quantum dots are also considered a competitive architecture for semiconductor-based quantum technology. In this project, we investigated several approaches to creating hole devices in germanium-based materials as well as injecting hole spins in such structures. We also explored the roles of hole injection in wet chemical etching of germanium. Our main results include the demonstration of germanium metal-oxide-semiconductor field-effect transistors operated at cryogenic temperatures, ohmic current-voltage characteristics in germanium/silicon-germanium heterostructures with ferromagnetic contacts at deep cryogenic temperatures and high magnetic fields, evaluation of the effects of surface preparation on carrier mobility in germanium/silicon- germanium heterostructures, and hole spin polarization through integrated permanent magnets. These results serve as essential components for fabricating next-generation germanium-based devices for microelectronics and quantum systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling of electron energy spectra and mobilities in semi-metallic Hg{sub 1−x}Cd{sub x}Te quantum wells

Electron mobility, energy spectra, and intrinsic carrier concentrations in the n-type Hg{sub 0.32}Cd{sub 0.68}Te/Hg{sub 1−x}Cd{sub x}Te/Hg{sub 0.32}Cd{sub 0.68}Te quantum well (QW) in semi-metallic state are numerically modeled. Energy spectra and wave functions were calculated in the framework of the 8-band k-p Hamiltonian. In our model, electron scattering on longitudinal optical phonons, charged impurities, and holes has been taken into account, and the mobility has been calculated by an iterative solution of the Boltzmann transport equation. Our results show that the increase of the electron concentration in the well enhances the screening of the 2D electron gas, decreases the hole concentration, and can ultimately lead to a high electron mobility at liquid nitrogen temperatures. The increase of the electron concentration in the QW could be achieved in situ by delta-doping of barriers or by applying the top-gate potential. Our modeling has shown that for low molar composition x the concentration of holes in the well is high in a wide range of electron concentrations; in this case, the purity of samples does not significantly influence the electron mobility. These results are important in the context of establishing optimal parameters for the fabrication of high-mobility Hg{sub 1−x}Cd{sub x}Te quantum wells able to operate at liquid nitrogen temperature and thus suitable for applications in terahertz detectors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Record-quality GaAs two-dimensional hole systems

The complex band structure, large spin-orbit induced band splitting, and heavy effective mass of two-dimensional (2D) hole systems hosted in GaAs quantum wells render them rich platforms to study many-body physics and ballistic transport phenomena. Here we report ultra-high-quality (001) GaAs 2D hole systems, fabricated using molecular beam epitaxy and modulation doping, with mobility values as high as 5.8 × 10 6 cm 2 /(V s) at a hole density of p = 1.3 × 10 11 /cm 2 , implying a mean free path of ≃ 27 μm. In the low-temperature magnetoresistance trace of this sample, we observe high-order fractional quantum Hall states up to the Landau level filling ν = 12/25 near ν = 1/2. Furthermore, we see a deep minimum develop at ν = 1/5 in the magnetoresistance of a sample with a much lower hole density of p = 4.0 × 10 10 /cm 2 where we measure a mobility of 3.6 × 10 6 cm2/(V s). Finally, these improvements in sample quality were achieved by the reduction of residual impurities both in the GaAs channel and in the AlGaAs barrier material, as well as optimization in the design of the sample structure.

2-dimensional systems↗

High conductivity coherently strained quantum well XHEMT heterostructures on AlN substrates with delta doping

Polarization-induced two-dimensional electron gases (2DEGs) in AlN/GaN/AlN quantum well high-electron-mobility transistors on ultrawide bandgap AlN substrates offer a promising route to advance microwave and power electronics with nitride semiconductors. The electron mobility in thin GaN quantum wells embedded in AlN is limited by high internal electric field and the presence of undesired polarization-induced two-dimensional hole gases (2DHGs). To enhance the electron mobility in such heterostructures on AlN, previous efforts have resorted to thick, relaxed GaN channels with dislocations. In this work, we introduce n-type compensation δ-doping in a coherently strained single-crystal (Xtal) AlN/GaN/AlN heterostructure to counter the 2DHG formation at the GaN/AlN interface, and simultaneously lower the internal electric field in the well. This approach yields a δ-doped XHEMT structure with a high 2DEG density of ∼3.2×1013 cm−2 and a room temperature (RT) mobility of ∼855 cm2/Vs, resulting in the lowest RT sheet resistance 226.7 Ω/□ reported to date in coherently strained AlN/GaN/AlN HEMT heterostructures on the AlN platform.

Physics↗

On the possibility of the electron-hole plasma conductivity in diamond being negative

The mobilities of charge carriers in boron-doped diamond at low temperatures are estimated by numerically solving the Boltzmann equation for a steady-state nonequilibrium velocity distribution function of the carriers with allowance for their scattering by phonons. Estimates show that, at temperatures of up to 100 K, charge carriers with a negative mobility exist over a fairly broad (on the order of 100 K) range of their energies. In the steady-state case, the absolute mobility integrated over the distribution function turns out to be positive, but there are grounds to suppose that, in the case of an unsteady pulsed source of charge carriers, it may become negative.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bimodal hole transport in bulk BiVO 4 from computation

We report first principles and mesoscale kinetic simulations of intrinsic electron and hole transport in stoichiometric monoclinic BiVO 4 (BVO). A main finding is that hole transport is bimodal: there are fast hole hops within VO 4 tetrahedra that are not ‘transport-efficient’ and slower hole hops across VO 4 tetrahedra that are ‘transport-efficient’. This bimodality in hole transport may explain the slow transport/high recombination characteristics of BVO. In this work, polaron hops were described via the two-state Marcus/Holstein model of V V –V IV and O I –O II interchanges for electron and hole polarons respectively. The relevant parameters in the theory were obtained using the density functional theory DFT+U method. Hopping activation energies were combined with Einstein diffusion theory to yield mobility as well as with kinetic Monte Carlo (KMC) modeling. All unique nearest neighbor electron and hole hopping processes were characterized. For V-to-V hops of electron polarons, we obtained activation energies of ~0.37 eV that compare well with the experimental activation energy of ~0.30 eV for drift mobility. Electron polarons remain localized on single sites along the hopping pathways before hopping via tunneling, suggestive of small non-adiabatic coupling and a diabatic character consistent with V-to-V electron transfer through space (no bridge linkers). These simulations yield a small electron transport anisotropy, with transport in the (a,b) plane being faster than along the c direction by a factor of ~2. For hole polarons our calculations support the character of small polarons localized on O atoms as well. Some nearest neighbor hole hops have a diabatic character, while other nearest neighbor hops are adiabatic and phonon-assisted with an Arrhenius thermal dependence. Hops through O–V–O bridges and through space have low activation barriers (~0.17 eV and ~0.25 eV) while hops through O–Bi–O bridges have higher activation barriers (~0.37 eV and higher). The mobility is gated by the slower transport across VO 4 tetrahedra through O–Bi–O bridges owing to the underlying BVO lattice network. Hole mobility is determined to be about one order of magnitude larger than electron mobility consistent with THz spectroscopy measurements. Here, this work sets the foundation to address facet selectivity of charge carriers in shape and size-tailored crystals.

36 MATERIALS SCIENCE↗