Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLE DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Notch insensitivity in fatigue failure of chopped carbon fiber chip-reinforced composites using experimental and computational analysis

This study focuses on the notch effect on the fatigue failure of chopped carbon fiber chip-reinforced sheet molding compound (SMC) composites by using both experimental and numerical methods. The S-N diagrams of notched specimens are first obtained experimentally, which exhibit large scatter and are shown to depend on the spatial distribution of local fiber orientations. After considering the effect of this spatial distribution by adopting a new fatigue damage parameter to normalize the results, we achieve a much better correlation in the normalized S-N diagram for all the notched specimens with different hole diameters. Next, compared with the fatigue results of smooth specimens without notches, we find that SMC composites under tension-tension fatigue loading exhibit notch-insensitivity, which renders this type of composites a better candidate in joints or similar applications. Meanwhile, the fatigue failure mechanisms of notched SMC composites are explored through a microstructure characterization procedure. On this basis, a computational micromechanics model considering the notch effect and an improved multi-scale progressive damage fatigue law, calibrated by coupon-level fatigue tests of smooth SMC composites under different loading conditions, are employed to predict the fatigue behavior of notched SMC composites. We show that detailed failure processes and fatigue life of notched SMC composites can be efficiently and adequately predicted by this computational framework.

36 MATERIALS SCIENCE↗
DOE OSTI2025

New Insights into Nonthermal Plasma-Assisted Poly(vinyl alcohol) Depolymerization Catalyzed by TiO 2

Here, in this study, we investigated the solid residual poly(vinyl alcohol) (PVA) and TiO 2 after nonthermal air, CO 2 , and N 2 plasma depolymerization in the absence and presence of TiO 2 . Scanning electron microscopy studies showed the absence of highly viscous tar and carbonaceous residues on the surfaces of PVA and TiO 2 . In the absence of TiO 2 , PVA particles exhibited micron-sized holes on their surfaces, whereas in the presence of TiO 2 , the surface roughness of PVA particles was observed at the submicron scale. These observations suggest that TiO 2 facilitates the even distribution of nonthermal plasma at a submicron scale, leading to a more uniform depolymerization of PVA surfaces. Raman, Fourier transform infrared spectroscopy, and X-ray absorption spectroscopy showed that (i) the surface of residual PVA contains mainly ketone functional groups and less C-H bonds than the pristine PVA and (ii) further confirmed the absence of highly viscous tar and carbonaceous residues on both used TiO 2 and residual PVA. The nuclear magnetic resonance and mass spectroscopy suggested that the PVA is growing back to poly polyvinyl acetate by the esterification reaction, and the ethers are produced by the acetal reaction between PVA and aldehyde. The transmission electron microscopy and X-ray diffraction analysis indicated no major crystal structural change of the TiO 2 catalyst after the plasma reactions. This study demonstrates that nonthermal plasma-assisted depolymerization is a viable alternative to thermal depolymerization, offering the unique advantage of converting polymer wastes into gaseous small organic molecules without generating recalcitrant viscous tar and carbonaceous residues on the surfaces of the polymer and TiO 2 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Decoupling excitons from high-frequency vibrations in organic molecules

The coupling of excitons in π-conjugated molecules to high-frequency vibrational modes, particularly carbon–carbon stretch modes (1,000–1,600 cm -1 ) has been thought to be unavoidable. These high-frequency modes accelerate non-radiative losses and limit the performance of light-emitting diodes, fluorescent biomarkers and photovoltaic devices. Here, by combining broadband impulsive vibrational spectroscopy, first-principles modelling and synthetic chemistry, we explore exciton–vibration coupling in a range of π-conjugated molecules. We uncover two design rules that decouple excitons from high-frequency vibrations. First, when the exciton wavefunction has a substantial charge-transfer character with spatially disjoint electron and hole densities, we find that high-frequency modes can be localized to either the donor or acceptor moiety, so that they do not significantly perturb the exciton energy or its spatial distribution. Second, it is possible to select materials such that the participating molecular orbitals have a symmetry-imposed non-bonding character and are, thus, decoupled from the high-frequency vibrational modes that modulate the π-bond order. We exemplify both these design rules by creating a series of spin radical systems that have very efficient near-infrared emission (680–800 nm) from charge-transfer excitons. We show that these systems have substantial coupling to vibrational modes only below 250 cm -1 , frequencies that are too low to allow fast non-radiative decay. This enables non-radiative decay rates to be suppressed by nearly two orders of magnitude in comparison to π-conjugated molecules with similar bandgaps. Our results show that losses due to coupling to high-frequency modes need not be a fundamental property of these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1977

On the nature of photospheric magnetic fields beneath large coronal holes

Proposed mechanisms for the formation of coronal holes are considered; the crucial issue appears to be whether the holes are permeated by rigidly rotating fields. It is suggested that the interaction between such a field and the differentially rotating, diffusive solar envelope will produce a fore aft asymmetry in the distribution of fields which emerge to the photosphere. An initial study is carried out in the context of an illustrative example, and the results indicate that the asymmetry may be observed for a certain range of parameters involving the properties of the solar envelope and the characteristic size of the emerging field pattern.

Frankenthal, S.↗
NASA NTRS1984

Pin-loaded holes in large orthotropic plates

Pin-loaded holes commonly occur in engineering structures. However, accurate analysis of such holes presents formidable difficulties because of the load-dependent contact of the pin with the plate. Significant progress has recently been achieved in the analysis of holes in isotropic plates. This paper develops a simple and accurate method for the partial contact analysis of pin-loaded holes in composites. The method is based on an inverse formulation that seeks to determine loads in a given contact-separation configuration. A unified approach for all types of fit was used. Continuum solutions were obtained for infinitely large plates of various typical orthotropic properties with holes loaded by smooth rigid pins. These solutions were then compared with those for isotropic plates. The effects of orthotropy and the type of fit were studied through load-contact relationships, distribution of stresses and displacements, and their variation with load. The results are of direct relevance to the analysis and design of pin joints in composite plates.

Mangalgiri, P. D.↗
NASA NTRS1988

Iridium, shocked minerals, and trace elements across the Cretaceous/Tertiary boundary at Maud Rise, Wedell Sea, and Walvis Ridge, South Atlantic Ocean

Sediments spanning a 5 meter section across the Cretaceous-Tertiary boundary at ODP holes 689B and 690D, Maud Rise, Wedell Sea and hole 527, Walvis Ridge, are being analyzed for shock deformation, PGE's and other trace elements (including REE's). Mineral separates from each sample were studied with optical microscopy to determine the distribution and microstructural state of quartz and feldspar present in the sediments. Samples from Maud Rise were taken of the K/T transition and at about 50 cm intervals above and below it. These samples consist of carbonate-rich sediments, with the K/T transition marked by a change from white Maastrichtian oozes to a greenish ooze with higher concentrations of altered volcanic clay and vitric ash. The Walvis Ridge site is characterized by more clay-rich sediments with average carbonate content about 60 to 70 percent. Initial results from RNAA studies indicate that iridium is present in all the Maud Rise samples in concentrations equal to or greater than 0.01 ppb (whole-rock basis). Preliminary results from optical microscopy indicate the occurrence of shock mosaicism in quartz and feldspar in all of the samples studied. The pervasiveness of shock mosaicism and presence of planar features to 2 meters from the K/T boundary indicates that a single impact or volcanic explosion 66 ma may be ruled out as responsible for the K/T event. A similar conclusion may be drawn independently from the distribution of iridium and other trace elements. Regardless of the source of the shock waves and sediment contamination, multiple events are required over a ca.0.5 my timespan; currently we favor endogenous sources.

Huffman, Alan R.↗
NASA NTRS1991

Particle acceleration near X-type magnetic neutral lines

The behavior of charged particles near X-type magnetic neutral lines is investigated. The magnetic field is taken to be hyperbolic and time stationary, with a uniform electric field perpendicular to the magnetic field. The general properties of the orbits of noninteracting particles in that field geometry are examined. Approximate analytic solutions to the orbit equations are derived by considering a magnetic-insulation picture where there is a hole in the magnetic insulation around the neutral line. Scaling laws for the dependence of the energy gain on strengths of the magnetic and electric fields are derived. The kinetic-energy distribution function for accelerated particles is derived for particles flowing past the neutral line. These analytic derivations are supported by computer simulations, in which the relativistic equations of motion for single test particles are numerically solved and the orbits and kinetic-energy gains of the particles are obtained. A number of simulations were performed and one parameter at a time was varied. Applications of the results to magnetic-neutral-line regions in space physics and astrophysics are possible.

Deeg, Hans-Jorg↗
NASA NTRS2004

Interpretive Tools for Analysis of Coronal Images

Contents include list of publications resulting from grant: Magneto-Hydrodynamic Model of the Solar Corona and Interplanetary Medium. Coronal magnetic field topology and source of fast solar wind. Geophysical Importance of Global Magnetic Field Geometry and Density Distribution in Solar Wind Modeling. Empirical Model of the Corona-Solar Wind with Multiple Current Sheets. Model of the Solar Wind and its Comparison with ULYSSES. Physical properties of a coronal hole from a coronal diagnostic spectrometer, Mauna Loa Coronagraph, and LASCO observations during the Whole Sun Month. Semi-Empirical 2-D MHD Model of the Solar corona and Solar Wind: Energy Flow in the Corona. Source Region of High and Low Speed Wind during the Spartan. Three-dimensional coronal density structure. Cone Model for Halo CME's: Application to Space Weather Forecasting.

Ofman, Leon↗
NASA NTRS2020

SNPP and N20 VIIRS Solar Vector Orientation Knowledge Error Detected by SDSM Sun Views

The Visible Infrared Imaging Radiometer Suite (VIIRS) is a passive scanning Earth observing satellite radiometer. The VIIRS has 22 spectral bands with design center wavelengths from 0.41 to 12.01 μm, providing data to generate more than 20 Earth’s biogeophysical parameters. Fourteen of the 22 VIIRS bands are the reflective solar bands (RSBs), detecting Earth reflected sunlight. To ensure data quality, regular on-orbit radiometric calibrations of the RSBs are performed, mainly through observations of an onboard solar diffuser (SD). The spectral radiance provided by the sunlit SD depends on the SD screen transmittance which is a function of the solar vector orientation. Additionally, on orbit the SD’s bidirectional reflectance distribution function (BRDF) changes its value due to solar bombardment. The BRDF change is derived from the SD stability monitor (SDSM) measurements. The SDSM views the Sun through a screen with through holes (the SDSM screen) and the SD at almost the same time. The time series of the ratio of the signal strengths is a measure of the SD BRDF on-orbit change. Hence the measurements of the on-orbit SD BRDF change depends on the SDSM screen relative transmittance which is also solar vector orientation dependent. In this paper for both the SNPP and the NOAA-20 VIIRS instruments we examine the solar vector orientation knowledge error through matching the SDSM screen relative effective transmittances derived from the calibration data collected on the yaw maneuver and the regular orbits.

SNPP↗
NASA NTRS1993

Determination of parameters for hypervelocity dust grains encountered in near-Earth space

Primarily interest was in the determination of the population of micrometeoroids and space debris and interpretation of the hole size in a thin film or in a micropore foam returned from space with theoretical calculations describing the event. In order to augment the significance of the theoretical calculations of the impact event, an experiment designed to analyze the charge production due to hypervelocity impacts on thin films also produced data which described the penetration properties of micron and sub-micron sized projectiles. The thin film penetration sites in the 500 A and 1000 A aluminum films were counted and a size distribution function was derived. In the case of the very smallest dust grains, there were no independent measurements of velocities like that which existed for the larger dust grains (d(sub p) is less than or equal to 1 micron). The primary task then became to assess the relationship between the penetration hole and the particle diameter of the projectile which made the hole. The most promising means to assess the measure of the diameters of impacting grains came in the form of comparing cratering mechanics to penetration mechanics. Future experimentation will produce measurements of the cratering as opposed to the penetrating event. Particles encountered by surfaces while being flown in space will degrade that surface in a systematic manner even when the impact is with small hypervelocity particles, d(sub p) is less than or equal to 10 microns. Though not to a degree which would precipitate a catastrophic failure of a system, the degradation of the materials comprising the interconnected system will occur. It is the degradation of the optical system and the subsequent embrittlement of other materials that can lead to degradation if not to failure. It is to this end that research was conducted to compare the primary consequences for experiments which will be flown to those which have been returned.

Tanner, William G.↗
DOE OSTI2024

O Corona, where art thou? eROSITA’s view of UV-optical-IR variability-selected massive black holes in low-mass galaxies

Finding massive black holes (MBHs,M BH ≈ 10 4 –10 7 M ⊙ ) in the nuclei of low-mass galaxies $\left( {{M_*}\mathop {\mathop < \limits_ }\limits_ {{10}^{10}}{M_ \odot }} \right)$ is crucial to constrain seeding and growth of black holes over cosmic time, but it is particularly challenging due to their low accretion luminosities. Variability selection via long-term photometric ultraviolet, optical, or infrared (UVOIR) light curves has proved effective and identifies lower-Eddington ratios compared to broad and narrow optical spectral lines searches. In the inefficient accretion regime, X-ray and radio searches are effective, but they have been limited to small samples. Therefore, differences between selection techniques have remained uncertain. Here, we present the first large systematic investigation of the X-ray properties of a sample of known MBH candidates in dwarf galaxies. We extracted X-ray photometry and spectra of a sample of ~200 UVOIR variability-selected MBHs and significantly detected 17 of them in the deepest available SRG/eROSITA image, of which four are newly discovered X-ray sources and two are new secure MBHs. This implies that tens to hundreds of LSST MBHs will have SRG/eROSITA counterparts, depending on the seeding model adopted. Surprisingly, the stacked X-ray images of the many non-detected MBHs are incompatible with standard disk-corona relations, typical of active galactic nuclei, inferred from both the optical and radio fluxes. They are instead compatible with the X-ray emission predicted for normal galaxies. After careful consideration of potential biases, we identified that this X-ray weakness needs a physical origin. A possibility is that a canonical X-ray corona might be lacking in the majority of this population of UVOIR-variability selected low-mass galaxies or that unusual accretion modes and spectral energy distributions are in place for MBHs in dwarf galaxies. This result reveals the potential for severe biases in occupation fractions derived from data from only one waveband combined with SEDs and scaling relations of more massive black holes and galaxies.

Astronomy & Astrophysics↗
DOE OSTI2021

The Relative Contribution to Heavy Metals Production from Binary Neutron Star Mergers and Neutron Star–Black Hole Mergers

The origin of the heavy elements in the universe is not fully determined. Neutron star–black hole (NSBH) and binary neutron star (BNS) mergers may both produce heavy elements via rapid neutron-capture (r-process). We use the recent detection of gravitational waves from NSBHs, improved measurements of the neutron star equation of state (EoS), and the most modern numerical simulations of ejected material from binary collisions to measure the relative contribution of NSBHs and BNSs to the production of heavy elements. As the amount of r-process ejecta depends on the mass and spin distribution of the compact objects, as well as on the EoS of the neutron stars, we consider various models for these quantities, informed by gravitational-wave and pulsar data. We find that in most scenarios, BNSs have produced more r-process elements than NSBHs over the past 2.5 billion years. If black holes have preferentially small spins, BNSs can produce at least twice the amount of r-process elements than NSBHs. If black hole spins are small and there is a dearth of low-mass (<5M ⊙ ) black holes within NSBH binaries, BNSs can account for the near totality of the r-process elements from binaries. For NSBH to produce a large fraction of r-process elements, black holes in NSBHs must have small masses and large aligned spins, which is disfavored by current data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

On Finding Black Holes in Photometric Microlensing Surveys

There are expected to be millions of isolated black holes in the galaxy resulting from the deaths of massive stars. Measuring the abundance and properties of this remnant population would shed light on the end stages of stellar evolution and the evolution paths of black hole systems. Detecting isolated black holes is currently only possible via gravitational microlensing, which has so far yielded one definitive detection. The difficulty in finding microlensing black holes lies in having to choose a small subset of events, based on characteristics of their light curves, to allocate expensive and scarce follow-up resources to confirm the identity of the lens. Current methods either rely on simple cuts in parameter space without using the full distribution information or are only effective on small subsets of events. In this paper, we present a new lens classification method. The classifier takes in posterior constraints on light-curve parameters and combines them with a Galactic simulation to estimate the lens class probability. This method is flexible and can be used with any set of microlensing light-curve parameters, making it applicable to large samples of events. We make this classification framework available via the popclass Python package. We apply the classifier to ~10,000 microlensing events from the Optical Gravitational Lensing Experiment survey and find 23 high-probability black hole candidates. Our classifier also suggests that the only known isolated black hole is an observational outlier, according to current Galactic models, and the allocation of astrometric follow-up on this event was a high-risk strategy.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Extreme Variability Quasars in Their Various States. I. The Sample Selection and Composite SDSS Spectra

Extremely variable quasars (EVQs) are a population of sources showing large optical photometric variability revealed by time-domain surveys. The physical origin of such extreme variability is yet unclear. In this first paper of a series, we construct the largest-ever sample of 14,012 EVQs using more than 15 yr of photometric data from Sloan Digital Sky Survey (SDSS) and Pan-STARRS1. We divide the EVQs into five subsamples according to the relative brightness of each EVQ during SDSS spectroscopic observation compared with the mean brightness from photometric observations. Corresponding control samples of normal quasars are built with matched redshift, bolometric luminosity, and supermassive black hole mass. We obtain the composite SDSS spectra of EVQs in various states and their corresponding control samples. We find EVQs exhibit clearly bluer SDSS spectra during bright states and clearly redder spectra during dim states, consistent with the "bluer-when-brighter" trend widely seen in normal quasars. We further find that the line equivalent widths (EWs) of broad Mg II, C IV and [O III] (but not broad Hβ, which is yet puzzling) gradually decreases from the dim state to the bright state, similar to the so-called intrinsic Baldwin effect commonly seen in normal active galactic nuclei. In addition, EVQs have consistently larger line EWs compared with the control samples. We also see that EVQs show slight excess in the very broad line component compared with control samples. Possible explanations for the discoveries are discussed. Our findings support the hypothesis that EVQs are in the tail of a broad distribution of quasar properties but are not a distinct population.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Multifrequency Analysis of Favored Models for the Messier 87* Accretion Flow

Abstract The polarized images of the supermassive black hole Messier 87* (M87*) produced by the Event Horizon Telescope (EHT) provide a direct view of the near-horizon emission from a black hole accretion and jet system. The EHT theoretical analysis of the polarized M87* images compared thousands of snapshots from numerical models with a variety of spins, magnetization states, viewing inclinations, and electron energy distributions, and found a small subset consistent with the observed image. In this article, we examine two models favored by EHT analyses: a magnetically arrested disk with moderate retrograde spin and a magnetically arrested disk with high prograde spin. Both have electron distribution functions that lead to strong depolarization by cold electrons. We ray trace five snapshots from each model at 22, 43, 86, 230, 345, and 690 GHz to forecast future very long baseline interferometry (VLBI) observations and examine limitations in numerical models. We find that even at low frequencies where optical and Faraday rotation depths are large, approximately rotationally symmetric polarization persists, suggesting that shallow depths dominate the polarization signal. However, morphology and spectra suggest that the assumed thermal electron distribution is not adequate to describe emission from the jet. We find 86 GHz images show a ringlike shape determined by a combination of plasma and spacetime imprints, smaller in diameter than recent results from the Global mm-VLBI Array. We find that the photon ring becomes more apparent with increasing frequency, and is more apparent in the retrograde model, leading to large differences between models in asymmetry and polarization structure.

Astronomy & Astrophysics↗
DOE OSTI2022

Evolution of the Heliotail Lobes over a Solar Cycle as Measured by IBEX

Energetic neutral atom (ENA) measurements by IBEX reveal that the heliotail comprises an energy-dependent multilobe structure. We examine the heliotail evolution over 11 yr of IBEX observations covering a full solar cycle (SC). We find the following: (1) The heliotail structure persists over the entire SC, comprising three ENA-enhanced and two ENA-suppressed lobes. (2) Lobe sizes and locations are generally stable but exhibit variations in ENA fluxes driven by the SC. (3) Lobe centers follow a cyclic behavior over multiple SC phases, indicating direct signatures of slow and fast solar wind (SW) interactions in the inner heliosheath (IHS). (4) The tilted plane passing through the port–starboard lobes' centers oscillates in latitude but maintains its tilt from the ecliptic plane, likely a consequence of the interstellar magnetic field draping around the heliosphere. (5) The transition of the central heliotail from a single lobe at ~1.1 keV to two lobes above ~2 keV is SC-dependent and directly reflects the IHS plasma properties, i.e., when ENA fluxes from fast SW from the polar coronal holes change over time. (6) The central lobe exhibits a substructure that is enhanced and offset from the downwind direction, possibly indicating an asymmetric ENA emission or an asymmetry in the parent plasma distribution. These results reveal the general stability of the heliotail structure over time and distinct variations in individual lobes' properties in relation to the SC phases. Furthermore, results show the effects of multiple SC phases in the tail, reflecting different ENA travel times and source histories.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1995

Analysis of corner cracks at hole by a 3-D weight function method with stresses from finite element method

Stress intensity factors for quarter-elliptical corner cracks emanating from a circular hole are determined using a 3-D weight function method combined with a 3-D finite element method. The 3-D finite element method is used to analyze uncracked configuration and provide stress distribution in the region where crack is to occur. Using this stress distribution as input, the 3-D weight function method is used to determine stress intensity factors. Three different loading conditions, i.e. remote tension, remote bending and wedge loading, are considered for a wide range in geometrical parameters. The significance in using 3-D uncracked stress distribution and the difference between single and double corner cracks are studied. Typical crack opening displacements are also provided. Comparisons are made with solutions available in the literature.

Zhao, W.↗
DOE OSTI2020

Absolute measurement of the Fano factor using a Skipper-CCD

Skipper-CCD can achieve deep sub-electron readout noise making possible the absolute determination of the exact number of ionized electrons in a large range, from 0 to above 1900 electrons. In this work we present a novel technique that exploits this unique capability to allow self-calibration and the ultimate determination of silicon properties. We performed an absolute measurement of the variance and the mean number of the charge distribution produced by $^{55}$Fe X-rays, getting a Fano factor absolute measurement in Si at 123K and 5.9 keV. A value of 0.119 $\pm$ 0.002 was found and the electron-hole pair creation energy was determined to be (3.749 $\pm$ 0.001) eV. This technology opens the opportunity for direct measurements of the Fano factor at low energies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗